You are on page 1of 2

APS-1(2011-12)

1. FACTS devices are generally used for to compensateof the


transmission line.
A) Reactance B) Resistance C) Conductance D) Admittance
2. FACTS devices generally deals with
A) S
B) Q C) P D) Load Angle
3. AGC controls
A) Frequency B) Torque C) Steam/Water Input
4. Full form of UPFC
A) Unified power
B) Unified power
C) Unified power
D) Unique power

D) All of the above

is
flow controller
factor controller
flow compensator
flow controller

5. STATCOM + SSSC will make


A) UPQC B) TCSC C) UPFC D) SVR
6. Unit of wave number() is
A) rad-km B) rad-cm C) rad/km D) rad/cm
7.

Saturated reactor will generate harmonics of the order of


A) 16k 1 B) 9k 1 C)18k 1 D) 20k 1

8. Thyristor firing angle should be between


A) 90- 145 B) 90 - 180 C) 60 - 180 D) 90 - 150
9. Losses in FC-TCR will vary in the range of
A) 0.5 - 0.9% B) 0.8 - 0.15% C) 0.5 0.12% D) 0.5 - 0.7%
10.TSC-TCR will compensate Q in which region?
A) Capacitive - Inductive B) Inductive only C) Capacitive only D)None
11.IGBT is used in HVDC transmission because of
A) Fast switching capacity
B) Can withstand high voltage
C) Can tolerate mechanical shock
D) Can withstand high current shock
12.High voltage DC line is selected to
A) Reduce cost B) Reduce number of conductor C) Reduce losses D) All of
the above
13.Main problem of HVDC line at receiving end is of

A) P balance B) Q balance C) Voltage balance D) S balance


14.Full form of EAG in HVDC converter is
A) Extinction angle control
B) Extinction angular control
C) Excitation angle control
D) None of the above
15.For sea cableHVDC transmission line will be appropriate.
A) Monopolar transmission
B) Bipolar transmission
C) Monopolar with metallic return path
D) Simple DC line
16.Function of smoothing reactor is/are
A) Prevention of intermittent current
B) Limitation of the DC fault currents
C) Prevention of resonance in the
D) All of the above
17.IEC 60060 is used for
A) Insulation co-ordination B) Surge arrestor C) HV testing techniques D)
Converter testing
18. Oil filled cable can be used upto
A) 100 kV B) 200 kV C) 600kV D) 800 kV
19.Full form of MRTB is
A) Metallic return transfer breaker
B) Metallic rated transfer breaker
C) Metallic resistant transfer breaker
D) Metallic reclosure transfer breaker
20.In Gujarat which company has implemented first HVDC plant and in which
city
A) TATA, Kutchh
B) TORRENT, Chanasma
C) ADANI, Kutchh
D) TORRENT, Gandhinagar

You might also like