RDCO-01/02/03/04
DDCS Communication
option modules
Overview
‘The RDCO-0x DDCS Communication options are add-on
modules for the
+ RMIO Motor Control and iO board (also part of RDCU
control units)
+ BCU control units
RDCO modules are available factory-installed as well as
retrofit kts
‘The ROCO module includes the connectors for fiber optic
DOGS channels CHO, CH1, CH2 and CH3. The usage of these
channels is determined by the application program; see the
inmware Manual ofthe drive. However, the channels are
ormally assigned as follows:
‘CHO — overriding system (eg. fieldbus adapter)
CH1 — 1/0 options and supply unit
CH2 — Master/Follower link
(CHS - PC tool (ACS800 only)
‘There are several types of the RDO. The diference between
the types is the optical components. In addition, each type is
avaliable with a coated circuit board, this being indicated by a
“C" suffix, eg, ROCO-03C.
Optical Component type +]
Deemed cHo | CHT ‘CH2 CH3
ROCOKG) | Toma | Smead | owes | TOMBE
060020) | swae | sea | 10mBd | 10 MBs
| Roco0x0) | swes | see | smea | Swor
| R0c0-04(6) | 10 mea
10 Mad | 10Mad | 10MBd
1e optical components at both ends ofa fiber optic link must
0¢ of the same type forthe light intensity and recewer
sensitivity levels to match. Plastic optical fiber (POF) cables
‘can be used with both § MBd and 10 MBd optical components.
10 MBd components also enable the use of Hard Clad Silica
(HCS) cables, which allow longer connection distances thanks
to their lower attenuation,
Note: The optical component type does not reflect the actual
‘communication speed.
Delivery check
The option package contains:
+ RDCO-0x module
+ Two screws (M3*8)
+ This document.
Module layout
Fixing Fiber optic channels
screws
Installation
WARNING! At electrical instalation and
maintenance work onthe crive shou be cared
Out by qualified electncans ony
The ave and adjoining equipment must be
bropary earthed
Do not work on a powered dive, Before instalation, switch of
the mains and other dangerous voiages (eg ‘tom exteal
convo crcults) tothe drive. After eatehing of the mains,
always allow the intermediate orci capactors 5 minutes 0