Professional Documents
Culture Documents
Bhubaneswar
Assignments on Latching
Assignment 1:Daw and design a lad.
.
(HINTS:-START-STOP).
Assignment 2:A conveyer C is to run when any of the four push button is
pressed. The conveyer is to stop when any one of the four feed back
comes to the plc from the physical site.
Assignment 3:Design and draw the schematic for conventional hardwired circuit that
will perform the following circuit function using break-make
pushbuttons:
Turn on light L1 when pushbutton pb1 is pressed.
Turn on light L2 when pushbutton pb2 is pressed.
Electrically interlock the pushbuttons so that L1 and L2 cannot both
be turned on at same time.
Assignment 4:-