Professional Documents
Culture Documents
a) The entire seven years the sign manufacturer and sheeting manufacturer
will replace the sheeting required to restore the sign surface to its
original effectiveness.
607-4
b) In addition, during the first five years sign manufacturer and sheeting
manufacturer will cover the cost of restoring the sign surface to its
original effectiveness at no cost to the NHA for materials and labor.
In lieu of wide flange steel posts the Contractor may use tubular steel posts
of minimum internal and external diameters of sixty three (63) mm and
seventy five (75) mm respectively conforming to the specifications of
ASTM A 501.
All posts shall be thoroughly cleaned, free from grease, scale and rust, and
shall be given one coat of rust inhibitive priming paint and two coats of grey
paint. Length of the posts shall be such that their top flushes with the top of
the sign penal, where as bottom of sign panel is at least hundred and eighty
(180) centimeters above shoulder level.
607.2.4 Plates
a) Plates shall be non-porous, smooth, flat, rigid, weather proof and shall
not rust or deteriorate otherwise.
It shall be so cut that there are no sharp edges and that the corners are
rounded off to a radius of thirty seven and half (37.5) mm. Any trade mark or
other printing shall be carefully removed with liquid thinner.
b) The High Intensity Grade sheeting for the background should cover the
whole area of the sign plate.