You are on page 1of 1

Product Specifications

AE01K
AE01K--D0820
D0820--004
230 Vac Solenoid Valve Kit
Dimensions
Gross Weight, Packed 1.4 kg | 3.0 lb
Net Weight 1.0 kg | 2.1 lb
Product Depth, Packed 43.2 cm | 17.0 in
Product Height, Packed 33.0 cm | 13.0 in
Product Width, Packed 12.7 cm | 5.0 in

General Specifications
Product Type Solenoid kit
Includes 0.01 micron filter element | 1.0 micron filter element | 1/4 in polyethylene tubing | 1/4 in
spiral wrap tubing | 3/8 in nylon tubing | 3/8 in polyethylene tubing | 5.0 micron filter
element | 90 elbow fitting | Brass barb fitting | Compression nut and sleeve, 3/8 in
hose | Die-cut open cell foam | Double-sided tape | Drain pan | Female tab
terminal | Flat washers | Fork lug terminal | Gast compressor overhaul kit | Instruction
sheet | Lock washers | Male connector fitting | Nylon cable tie | Pan head
screws | Pipe plug fitting | Polyethylene tubing tee | PTFE tape | Rubber
grommet | Solenoid filter kit | Solenoid mounting bracket | Solenoid valve | Wire

Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

2017CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 19, page 1 of 1
2016 March 8, 2017

You might also like