You are on page 1of 2

Page 1 of 2

Chemrite Ferrogard 110


Polymer Modified Corrosion Protection Coating
__________________________________________________________
Description Chemrite Ferrogard 110 is a cementitious,
silica fume containing, polymer modified, single
component protective coating for concrete, steel and
other metal surfaces.
____________________________________________________________________
Uses For protecting concrete and metal surfaces like
steel, cast iron, zinc etc. against corrosion.
_____________________________________________________________________
Advantages - To be mixed with water only at site.
- Excellent workability.
- Adjustable consistency for vertical or overhead
application.
- Good mechanical strengths.
- Resistant to aggressive elements including sulphates,
diluted Acids and chlorides.
- Excellent waterproofing characteristics.
- Non corrosive, non toxic.
________________________________________________________
Technical Data
__________________________________________________________________
Form Grey powder
__________________________________________________________________
Mixing Ratio A+B = 1 : 2.5
__________________________________________________________________
Pot Life (25C) Upto 60 minutes.
_________________________________________________________
Density Dry Density 1.80 0.10 Kg/Lit.
Wet Density 2.0 Kg/Lit.
__________________________________________________________________
Mechanical Compressive Strength 40 45 N/mm2
Strengths Flexmal strength 6 8 N/mm2
(28 Days)
__________________________________________________________________
Layer Thickness 1 3 mm
__________________________________________________________________
Coverage 2.0 2.5 Kg/m2 per 1 mm thickness
__________________________________________________________________
Packaging 10 Kg paper bag
__________________________________________________________________
Shelf Life & 9 months minimum if stored in unopened original
Storage packing in dry condition away from sunlight.
___________________________________________________________________________________________________

1
Page 2 of 2
__________________________________________________________________
Application
___________________________________________________________________________________________________
Substrate Substrate must be sound, free from dust, loose
Preparation particles, cement laitance, curing compounds, oil,
grease or any other contamination. Metal surfaces
should be free from scale, rust, oil and grease.
__________________________________________________________________
Mixing Pour water in given quantity into the mixing
container. Add powder while mixing continuously.
Use low speed electric mixers (max. 500 RPM) for
3 minutes avoiding air entrapment.
__________________________________________________________________
Application Chemrite Ferrogard 110 can be applied with
spatula or brush. As soon as the mortar has started
to set it can be smoothed by wooden or synthetic
float, styrofoam block or sponge.
__________________________________________________________________
Curing Where ambient conditions may lead to rapid surface
drying, the use of light water fogging for 48 h or a
suitable water based curing compound is
recommended.
__________________________________________________________________
Important - Chemrite Ferrogard 110 should not be used
Remarks at temperatures below 5C.
- At ambient temperatures above 35C, the material
should be stored in the shade and chilled water
should be used for mixing.
__________________________________________________________________
Cleaning Application and mixing tools should be cleaned
with water while material is still fresh. Hardened
material can only be removed mechanically.
__________________________________________________________________
Safety
___________________________________________________________________________________________________
Precautions Normal precaution, as with any cementitious
materials, should be taken. In contact with eyes or
skin, product may cause irritation. In case of such
contact, rinse with plenty of water and seek medical
help.
__________________________________________________________________
Toxicity Non toxic & Non-hazardous
___________________________________________________________________

You might also like