Professional Documents
Culture Documents
The DS-90 is a member of the DS series of Electric Encoders, The Electric Encoder is unique in being holistic, i.e., its output
based on Netzer Precision proprietary technology. The Electric reading is the averaged outcome of the whole area of the rotor ,
Encoder offers many advantages - some unparalleled This feature makes the Electric Encoder forgiving to mounting
tolerances, ball bearing wander etc.
Low profile (10mm).
The absence of components such as ball bearings , flexible
Hollow, floating shaft.
couplers, glass disc, light sources and detectors, along with very
No bearings or other contacting elements. low power consumption makes the Electric Encoder virtually
High resolution and precision. failure free.
High tolerance to temperature extremes , shock, moisture, EMI,
RFI and Magnetic fields. The internally shielded, DC operated Electric Encoder includes
Very low weight. an electric field generator, a field receiver, a sinusoidal shaped
dielectric rotor, and processing electronics.
Holistic signal generation
Absolute Position over digital interfaces. The output signals of Electric Encoder are analog Sine / Cosine
Mechanical representing the rotation angle. The digital outputs are obtained
by further processing - which may be either internal or external
Allowable mounting eccentricity 0.1 mm to the encoder.
Allowable rotor axial motion 0.1 mm
The combination of precision, low profile, low weight and high
Rotor inertia 2,812 gr mm2 reliability have made Netzer Precision encoders particularly
Total weight 50 gr suitable to a wide variety of critical applications including, but
Outer /Inner / Height 90 / 50 / 10 mm not limited to medical equipment and aerospace.
Material (stator, rotor) Ultem polymer
Electrical
Supply voltage 5V 5%
Interconnection Shielded cable or
Cable Length 1,500 mm MAX
Environmental
EMC IEC 6100-6-2, IEC 6100-6-4
Operating temperature range Digital: -40C to +85C
Relative humidity 98% Non condensing
Shock endurance 100 g for 11 ms
Vibration endurance 20 g 10 2000 Hz
Protection IP 40
Characteristics
Angular resolution 19 bits ; 524,288 CPR
Static error < 10 mDeg
Maximum operational speed 750 rpm
Measurement range Unlimited rotation
Power On - Max. operational speed 3.3 RPM , <=20/sec
Build In Test BIT Optional
www.netzerprecision.com 1
Sold & Serviced By:
0...5 inverted.
CLK/NCPRX[] (blue) The start bit and 0 bit
are omitted from the
CRC calculation.
Time- Elapse
5V between the
DATA/NCPTX[] (yellow) sequential
out cycles. startrequest 25 s
120
DATA/NCPTX[+] (green)
Gnd (black)
5V (red)
www.netzerprecision.com 2
Sold & Serviced By:
DS - 90 - 64 - 3S H - S 0 - n n n Pair# Color
NetzerCatNo.:CB00014
Provider:RayQUSA.wireCATNo:RQ213210 1 Red/Black
DS Product line Cable:30AWGtwistedpair(3):2(30AWG25/44finnedcopper, 2 Gray/Blue
nnn - Custom 0.15PFEto0.60.05OD).
Temperaturerating:60to+150DegC. 3 Green/Yellow
Outer Diameter
Braidedshield:Thinnedcopperbraided95%min.coverage.
Fine ECR C - Connector (optional) Jacket:0.45siliconrubberjacket3.450.2OD
0.610.051mm
Demonstration Kit:
Related documents:
www.netzerprecision.com 3
Sold & Serviced By:
A A
+0.05
50 0 A 0
87 -0.05
90
B B
C C
C
D
A 1.50 0.05 D
1.5
0 10
1.5
0
1.5 SECTION A-A
0
SECTION C-C
E 3 PLACES
Notes:
1) For any incompatibility with the model or missing
dimension, please refer to Netzer for clarification.
2) Packing must prevent physical damage during process
storage and shipment
The information contaned in this drawing is the sole property ot Netzer Precision Motion Sensores Ltd. Any reproduction in part or
whole without the written permission of Netzer Precision Motion Sensors Ltd.is prohibited. The drawing is confidential,and is the
property of Netzer Precision Ltd. it must not be disclosed to a third party without written consent of Netzer Precision Ltd.
NAME SIGNATURE DATE
DRAWN V.D xx.xx.xx
CHK'D xx.xx.xx
F APPV'D
UNLESS OTHERWISE SPECIFIED:
xx.xx.xx TITLE:
DS-90 ICD
DIMENSIONS ARE IN mm
MATERIAL: Coating: SCALE: 1:1
SURFACE FINISH: N6
LINEAR TOLERANCES: 0.1 mm DWG NO. : Revision :
ANGULAR TOLERANCES: 0.5 deg
00 A3
ALL CHAMFER: 0.1 mm X 45
1 2 3 4
CAT NO. : -.- SHEET 1 OF 1
www.netzerprecision.com 4
Sold & Serviced By:
1 2 3 4 5 6 7 8
4
B
B B
80 min 1
3 THREADS M2 DEEP 5mm
EQ.SP
90REF
SECTION A-A
2.50 max
1.60 -0.05
C C
0
10 95
FREE AREA FOR
CLAMP INSTALLATION
3 PLACES EQ.SP
D D
2
DETAIL B
A A
E
1 2 3 4
Critical dimensions marked with *
www.netzerprecision.com 5
Sold & Serviced By:
1 2 3 4 5 6 7 8
0 4 3 1
50 -0.05
0.05 A
10.10 -0.05
0.02 A
0.05 A
0
2
B
B B
+0.10
80 min
0.80 0
90REF
0 5
48.50 -0.10
SECTION A-A
1.60 -0.05
2.50min
C C
0
10
FREE AREA FOR 95
CLAMP INSTALLATION
3 PLACES EQ.SP
D D
DETAIL B
E
A A
Shaft - End installation (Retaining ring)
No Part Description QTY.
45.05 1 DS-90-64 Included DS-90 encoder 1
2 MA-0007 Included Encoder clamps ST. ST. 3
3 Shaft End Bolt (M2) DIN 912_M2 x 0-4_SIMP 3
4 MA-DS90-001 Optional installation kit DS-90 Wave Spring 1
F
5 DS-90 Retaining Ring
www.netzerprecision.com 6