You are on page 1of 2

VMP-430

MAIN STATION FOR FLUSH MOUNTING

Features
Designed to be used together with ACM exchanges and made for flush mounting.
A fully-equipped main station with free access to all extensions and features.
Handsfree open conversation or private by use of optional handset VMP-221.
Built-in loudspeaker w/ volume control
Built-in electret microphone gives clear sound
Keyboard with large illuminated digits w/ dimmer
Four (4) Direct Access keys for easy calling your most frequently used extensions or features, all
by a single key press. The Direct Access keys are user programmable.
C-key for cancelling calls
M-key for manual switching of speech direction (simplex).
Voice operating duplex speech. Full duplex when connected with handset VMP-221
Public Address messages via General Call and Group Calls with automatic answer back, are
available
Audio Programmes can individually be selected and received.
Screw terminals for easy connection of installation cables and optional

Specifications

Operation voltage Powered from exchange

Cable requirements Twisted 2 pairs 0.5mm2 outer screen

Connections Screw terminals

Loudspeaker Output 1.0 W (63 ohm)

Internal Loudspeaker impedance 63 ohm

Frequency range 300 - 5000 Hz

Operating temperature 5 - 55 C

Mic. Impedance for external handset 200 - 600 ohm

Material Bayblend plastic Membrane keyboard foil of cured PVC

Colour Black

IP- class IP-44

Dimensions (mm) 125W x 280H x 35D

Weight 0,65 kg

VINGTOR | DATASHEET VMP-430


www.vingtor.com ORDER NUMBER DESCRIPTION SHIP WEIGHT
VMP-430 Main station with illuminated buttons and 4x direct access keys 0.65 kg
Zenitel Norway AS
Related items
VMP-221 Handset for VMP-430
* C-key
0.65 kg
for canc
* M-key for manu
* Voice operating
when connecte
* Public Address
VMP-430 MAIN STATION FOR FLUSH MOUNTING and Group Cal
are available
* Receiption of A
* Audio Program
125 mm 35 mm selected and re
* Screw terminal
installation cab

Technical da
115 x 240 mm
Panel cut-out

VOLUME DIMMER ON
250 mm

CALL

Operation voltage:
280 mm

1 2 3 I
Cable requiremen
4 5 6 II

7 8 9 III
Connections:
M 0 C IV
Loudsp. Output:
Internal Loudsp. im
Freq. range:
Terminal Strip Temp. range:
Mic. impedance fo
+24V
0V

a b c d F G H I J K L M N O
NOTE!
Remove or cut strap
external handset:
between G-H and
To subscriber
b
a
between L-M before Material:
output in the connecting cable
exchange c
between VMP-221
d Local 24V DC or and VMP-430
from the exchange

Colour:
Description: IP rating:
Dimensions:
VMP-430:
Weight:
* Designed to be used together with VMP and ACM
exchanges and made for panel or flush mounting.
ORDER NUMBER
On-wall DOC NO
mounting by use of wooden box VMPK.
VMP-430 A100K10529 sales@vingtor.com
VINGTOR products*are developed
A fully-equipped
and marketed by Zenitel Norway AS. Themain station
companys Quality with
Assurance System is certifiedfree access
to meet the requirements toISO 9001:2002.
in NS-EN all Zenitel Norway AS reserves the right to modify designs
and alter specifications without prior notice, in pursuance of a policy of continuous improvement. 2009 Zenitel Norway AS.
extensions and features.

You might also like