You are on page 1of 57

K to 12 BASIC EDUCATION CURRICULUM

JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)

These are the specializations and their pre-requisites. These lists should be used as reference for curriculum maps.

AGRI-FISHERY ARTS
Specialization Number of Hours Pre-requisite
1. Agricultural Crops Production (NC I) 320 hours
2. Agricultural Crops Production (NC II) 640 hours
updated based on TESDA Training Regulations published December 28, 2013
3. Agricultural Crops Production (NC III) 640 hours Agricultural Crops Production (NC II)
4. Animal Production (Poultry-Chicken) (NC II) or
Animal Health Care Management (NC III) 320 hours Animal Production (Ruminants) (NC II) or
Animal Production (Swine) (NC II)
5. Animal Production (Poultry-Chicken) (NC II) 320 hours
updated based on TESDA Training Regulations published December 28, 2013
6. Animal Production (Large Ruminants) (NC II) 320 hours
updated based on TESDA Training Regulations published December 28, 2013
7. Animal Production (Swine) (NC II) 320 hours
updated based on TESDA Training Regulations published December 28, 2013
8. Aquaculture (NC II) 640 hours
9. Artificial Insemination (Large Ruminants) (NC II) 160 hours Animal Production (Large Ruminants) (NC II)
10. Artificial Insemination (Swine) (NC II) 160 hours Animal Production (Swine) (NC II)
11. Fish Capture (NC II) 640 hours
12. Fishing Gear Repair and Maintenance (NC III) 320 hours
13. Fish-Products Packaging (NC II) 320 hours
14. Fish Wharf Operation (NC I) 160 hours
15. Food Processing (NC II) 640 hours
16. Horticulture (NC III) 640 hours Agricultural Crops Production (NC II)
17. Landscape Installation and Maintenance (NC II) 320 hours
18. Organic Agriculture (NC II) 320 hours
19. Pest Management (NC II) 320 hours
20. Rice Machinery Operations (NC II) 320 hours
21. Rubber Processing (NC II) 320 hours
22. Rubber Production (NC II) 320 hours
23. Slaughtering Operations (Hog/Swine/Pig) (NC II) 160 hours

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 1 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)

HOME ECONOMICS
Number of
Specialization Pre-requisite
Hours
1. Attractions and Theme Parks Operations with Ecotourism (NC II) 160 hours
2. Barbering (NC II) 320 hours
3. Bartending (NC II) 320 hours
4. Beauty/Nail Care (NC II) 160 hours
5. Bread and Pastry Production (NC II) 160 hours
6. Caregiving (NC II) 640 hours
7. Commercial Cooking (NC III) 320 hours Cookery (NC II)
8. Cookery (NC II) 320 hours
9. Dressmaking (NC II) 320 hours
10. Events Management Services (NC III) 320 hours
11. Fashion Design (Apparel) (NC III) 640 hours Dressmaking (NC II) or Tailoring (NC II)
12. Food and Beverage Services (NC II) 160 hours
updated based on TESDA Training Regulations published December 28, 2013
13. Front Office Services (NC II) 160 hours
14. Hairdressing (NC II) 320 hours
15. Hairdressing (NC III) 640 hours Hairdressing (NC II)
16. Handicraft (Basketry, Macrame) (Non-NC) 160 hours
17. Handicraft (Fashion Accessories, Paper Craft) (Non-NC) 160 hours
18. Handicraft (Needlecraft) (Non-NC) 160 hours
19. Handicraft (Woodcraft, Leathercraft) (Non-NC) 160 hours
20. Housekeeping (NC II) 160 hours
updated based on TESDA Training Regulations published December 28, 2013
21. Local Guiding Services (NC II) 160 hours
22. Tailoring (NC II) 320 hours
23. Tourism Promotion Services (NC II) 160 hours
24. Travel Services (NC II) 160 hours
25. Wellness Massage (NC II) 160 hours

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 2 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
INDUSTRIAL ARTS
Number of
Specialization Pre-requisite
Hours
1. Automotive Servicing (NC I) 640 hours
updated based on TESDA Training Regulations published December 28, 2013
2. Automotive Servicing (NC II) 640 hours Automotive Servicing (NC I)
3. Carpentry (NC II) 640 hours
4. Carpentry (NC III) 320 hours Carpentry (NC II)
5. Construction Painting (NC II) 160 hours
6. Domestic Refrigeration and Air-conditioning (DOMRAC) Servicing (NC
640 hours
II)
7. Driving (NC II) 160 hours
8. Electrical Installation and Maintenance (NC II) 640 hours
9. Electric Power Distribution Line Construction (NC II) 320 hours Electrical Installation and Maintenance (NC II)
10. Electronic Products Assembly and Servicing (NC II) 640 hours
updated based on TESDA Training Regulations published December 28, 2013
11. Furniture Making (Finishing) (NC II) 640 hours
12. Instrumentation and Control Servicing (NC II) 320 hours Electronic Products Assembly and Servicing (EPAS) (NC II)
13. Gas Metal Arc Welding (GMAW) (NC II) 320 hours Shielded Metal Arc Welding (SMAW) (NC II)
14. Gas Tungsten Arc Welding (GTAW) (NC II) 320 hours Shielded Metal Arc Welding (GMAW) (NC II)
15. Machining (NC I) 640 hours
16. Machining (NC II) 640 hours Machining (NC I)
17. Masonry (NC II) 320 hours
18. Mechatronics Servicing (NC II) 320 hours Electronic Products Assembly and Servicing (EPAS) (NC II)
19. Motorcycle/Small Engine Servicing (NC II) 320 hours
20. Plumbing (NC I) 320 hours
21. Plumbing (NC II) 320 hours Plumbing (NC I)
22. Refrigeration and Air-Conditioning (Packaged Air-Conditioning Unit Domestic Refrigeration and Air-conditioning (DOMRAC)
640 hours
[PACU]/Commercial Refrigeration Equipment [CRE]) Servicing (NC III) Servicing (NC II)
23. Shielded Metal Arc Welding (NC I) 320 hours
24. Shielded Metal Arc Welding (NC II) 320 hours Shielded Metal Arc Welding (NC I)
25. Tile Setting (NC II) 320 hours
26. Transmission Line Installation and Maintenance (NC II) 640 hours Electrical Installation and Maintenance (NC II)

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 3 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)

INFORMATION, COMMUNICATIONS AND TECHNOLOGY (ICT)

Number of
Specialization Pre-requisite
Hours
1. Animation (NC II) 320 hours
2. Broadband Installation (Fixed Wireless Systems) (NC II) 160 hours Computer Systems Servicing (NC II)
3. Computer Programming (.Net Technology) (NC III) 320 hours
updated based on TESDA Training Regulations published December 28, 2013
4. Computer Programming (Java) (NC III) 320 hours
updated based on TESDA Training Regulations published December 28, 2013
5. Computer Programming (Oracle Database) (NC III) 320 hours
updated based on TESDA Training Regulations published December 28, 2013
6. Computer Systems Servicing (NC II) 640 hours
updated based on TESDA Training Regulations published December 28, 2007
7. Contact Center Services (NC II) 320 hours
8. Illustration (NC II) 320 hours
9. Medical Transcription (NC II) 320 hours
10. Technical Drafting (NC II) 320 hours
11. Telecom OSP and Subscriber Line Installation
320 hours Computer Systems Servicing (NC II)
(Copper Cable/POTS and DSL) (NC II)
12. Telecom OSP Installation (Fiber Optic Cable) (NC II) 160 hours Computer Systems Servicing (NC II)

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 4 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)

Course Description:

This course is designed to develop knowledge, skills, and desirable attitudes of an individual in the field of Electronic Products Assembly and Servicing National
Certificate Level II (NCII). The student is expected to demonstrate common competencies in applying apply quality standards, perform computer operations, perform
mensuration and calculation, prepare and interpret technical drawings, use and maintain hand tools, terminate and connect electrical wiring and electronic circuits, and test
electronic components. It also includes the development of core competencies such as assembling electronic products, service consumer electronic products and systems (audio
products and audio-video products), and service industrial electronic modules, products, and systems.

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE

Introduction The learners demonstrate an The learners shall be able to The learners
1. Basic concepts in assembling understanding of the basic independently demonstrate the 1. Explain basic concepts in assembling electronic
electronic products concepts and underlying common competencies in products
2. Relevance of the course theories in assembling electronic products assembly and 2. Discuss the relevance of the course
3. Career opportunities electronic products servicing as prescribed by TESDA 3. Explore career opportunities in assembling
Training Regulations electronic products

PERSONAL ENTREPRENEURIAL COMPETENCIES (PECs)

1. Assessment of Personal The learners demonstrate an The learners shall be able to LO 1. Recognize Personal Entrepreneurial TLE_PECS7-12-
Competencies and Skills understanding of ones PECs prepare an activity plan that Competencies and Skills (PECs) needed in 00-1
(PECs) vis--vis PECs of a in electronic products aligns with the PECS of a electronic products assembly and servicing
practicing entrepreneur/ assembly and servicing practitioner/entrepreneur in 1.1 Compare ones PECs with those of a
employee electronic products assembly and practitioner/entrepreneur
1.1 Characteristics servicing 1.2 Align ones PECs with those of a practitioner/
1.2 Attributes entrepreneur
1.3 Lifestyle 1.3 Assess ones PECs
1.4 Skills 1.4 Assess practitioners PECs
1.5 Traits
2. Analysis of PECs compared
to those of a practitioner
3. Align ones PECs based on
the results of the
assessment

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 5 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE

1. Strengthening and The learners demonstrate an The learners shall be able to LO 2. Develop and strengthen personal TLE_PECS7-12-
developing further ones understanding of ones PECs create a plan of action that competencies and skills (PECs) needed in 00-2
PECs in electronic products strengthens/develops ones electronic products assembly and servicing
assembly and servicing PECs in electronic products 2.1 Identify areas for improvement, development
assembly and servicing and growth
2.2 Align ones PECs according to his/her
business/career choice
2.3 Create a plan of action that ensures success
of his/her business/career choice

ENVIRONMENT AND MARKET (EM)

Market (Town) The learners demonstrate an The learners shall be able to LO 1. Recognize and understand the market TLE_EM7-12-
1. Key concepts of market understanding of the create a business vicinity map in electronic products assembly and 00-1
2. Players in the market concepts of environment and reflective of the potential servicing
(competitors) market and how they relate electronic products assembly and 1.1 Identify the players/ competitors within the
1. Products & services available to the field of electronic servicing market in the town
in the market products assembly and locality/town 1.2 Identify the different products/services
servicing, particularly in ones available in the market
town/ municipality

Market (customer) LO 2. Recognize the potential customer/ TLE_EM7-12-


1. Key concepts in identifying market in electronic products assembly and 00-2
and understanding the servicing
consumer 2.1 Profile potential customers
2. Consumer analysis through: 2.2 Identify the customers needs and wants
2.1 Observation through consumer analysis
2.2 Interviews 2.3 Conduct consumer/market analysis
2.3 Focus group discussion
(FGD)
2.4 Survey

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 6 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
1. Generating business ideas LO 3. Create new business ideas in TLE_EM7-12-
1.1 Key concepts in electronic products assembly and servicing 00-3
generating business by using various techniques
ideas 3.1 Explore ways of generating business ideas
1.2 Knowledge, skills, from ones own characteristics/attributes
passions, and interests 3.2 Generate business ideas using product
1.3 New applications innovation from irritants, trends, and
1.4 Irritants emerging needs
1.5 Striking ideas (new 3.3 Generate business ideas using Serendipity
concepts) 3.1 Walk
1.6 Serendipity Walk

1. Product development The learners demonstrate an The learners shall be able to LO 4. Develop a product/service in TLE_EM7-12-
2. Key concepts in developing understanding of concepts of create a business vicinity map electronic products assembly and servicing 00-4
a product environment and market and reflective of the potential 4.1 Identify what is of value to the customer
3. Finding Value how they relate to electronic electronic products assembly and 4.2 Identify the customer
4. Innovation products assembly and servicing market within the 4.3 Explain what makes a product unique and
1. Unique Selling Proposition servicing, particularly in ones locality/town competitive
(USP) town/municipality 4.4 Apply creativity and innovative techniques to
develop marketable product
4.5 Employ a USP to the product/service

1. Selecting business idea LO 5. Select a business idea based on the TLE_EM7-12-


2. Key concepts in selecting a criteria and techniques set 00-5
business idea 5.1 Enumerate various criteria and steps in
2.1 Criteria selecting a business idea
2.1 Techniques 5.2 Apply the criteria/steps in selecting a viable
business idea
5.3 Determine a business idea based on the
criteria/techniques set

1. Branding LO 6. Develop a brand for the product TLE_EM7-12-


6.1 Identify the benefits of having a good brand 00-6
6.2 Enumerate recognizable brands in the
town/province
6.3 Enumerate criteria for developing a brand
6.4 Generate a clear appeal

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 7 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
COMMON COMPETENCIES
LESSON 1: APPLYING QUALITY STANDARDS (AQS)

Standard operating The learners demonstrate an The learners shall be able to apply LO 1. Assess quality of received materials or TLE_IAEPAS9-
procedures in understanding of the quality standards based on components 12AQS-Ia-1
- Work instructions underlying principles in prescribed procedures and 1.1 Obtain work instructions in accordance with
- Work implementation/ applying quality standards standards standard operating procedures
completion based on prescribed 1.2 Carry out work in accordance with standard
Work instructions procedures and standards operating procedures
- Work orders 1.3 Check received materials or component parts
- Job orders against workplace standards and
Specification of materials specifications
and components 1.4 Isolate faults and faulty materials
- Wires 1.5 Record and/or report faults and faulty
- Cables materials to the supervisor concerned in
- Electrical tape accordance with workplace procedures
Components 1.6 Replace faulty materials and components in
- Resistors accordance with workplace procedures
- Capacitors
- Integrated circuits
- Diodes
- Transistor
Faults
- Factory defects
- Nonconformity to
specifications
- Nonconformity to
government standards
and PEC, environmental
code
- Safety defects
Recording and reporting
procedures
- Parts identification
- Component identification
- Unit model and make

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 8 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Related documents LO 2. Assess own work TLE_IAEPAS9-
- Service manuals 2.1 Use documentation relative to quality within 12AQS-Ib-2
- Operations Manual the company
- Certifications 2.2 Check completed work against workplace
- Type approval certificates standards relevant to the task undertaken
Quality standards on: 2.3 Isolate faulty pieces
- Materials 2.4 Record information on the quality and other
- Component parts indicators of production performance
- Final product according to workplace procedures
- Product production 2.5 Report deviations causes from specified
Checking process quality standards
- Quality controlling
Visual inspection
Comparison
- Quality assurance
Records and documents
- Organization work
procedures
- Manufacturers instruction
manual
- Forms
Performance monitoring LO 3. Engage in quality improvement TLE_IAEPAS9-
system 3.1 Participate in process improvement 12AQS-Ic-3
- Customer satisfaction procedures in relation to workplace
- Customer feedback form assignment
- Co-workers feedback 3.2 Carry out work according to process
- Supervisors rating sheet improvement procedures
- Suppliers feedback 3.3 Monitor performance of operation or quality of
product or service to ensure customer
satisfaction
LESSON 2: PERFORMING COMPUTER OPERATIONS (PCO)

Task identification The learners demonstrate an The learners shall be able to LO 1. Plan and prepare for task to be TLE_IAEPAS9-
- Planning understanding of the perform computer operations undertaken 12PCO-Ic-d-4
- Preparing underlying principles of based on the task assigned and 1.1 Determine requirements of task in accordance
operation and maintenance required outcome with job specifications
of a computer based on the

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 9 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Operational Health and task assigned and required 1.2 Select appropriate hardware and software in
Safety (OHS) guidelines and outcome accordance with task assigned and required
procedures outcome
Computer hardware 1.3 Plan task to ensure that the OHS guidelines
- Keyboard and procedures are followed
- Mouse
- Hard drives
- Monitor
Computer application
software

Application software LO 2. Input data into the computer TLE_IAEPAS9-


Data processing 2.1 Enter data into the computer using 12PCO-Id-e-5
Editing and saving appropriate program/application
Storage devices 2.2 Check information in accordance with
- CDs, CDR, CDRW, DVD standard operating procedures
- Hard disk drives local or 2.3 Store inputted data in storage media
remote/external according to requirements
- Flash drives 2.4 Perform work within ergonomic guidelines
Work ergonomic

Desktop icons LO 3. Access information using the TLE_IAEPAS9-


- Directories computer 12PCO-Ie-f-6
- Files and folders 3.1 Select correct program/application based on
- Recycle bin job requirements
Keyboard techniques 3.2 Access program/application containing the
- Proper handling information required
- Shortcut keys 3.3 Open/close desktop icons correctly for
Keyboard care and navigation purposes
maintenance 3.4 Carry out keyboard techniques in line with
OHS requirements for safe use of keyboards

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 10 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE

Computer application LO 4. Produce/output data using computer TLE_IAEPAS9-


software system 12PCO-If-7
Computer peripherals 4.1 Process entered data using appropriate
- Printer software commands
Storage devices 4.2 Print out data as required using computer
hardware/peripheral devices
4.3 Transfer files/data between compatible
systems using computer software and
hardware/peripheral devices

Computer maintenance LO 5. Maintain computer equipment and TLE_IAEPAS9-


- Disk cleanup systems 12PCO-Ig-8
- Checking disk errors 5.1 Undergo systems cleaning, minor
- Replacement of maintenance, and replacement of
consumables consumables
- Dusting the external and 5.2 Implement procedures for ensuring security
internal part of the of data, including regular backups and virus
computer checks
File maintenance 5.3 Perform basic file maintenance procedures
- Backing up files
- Deleting unwanted files
- Updating anti-virus
database/using more
appropriate antivirus
program

LESSON 3: PERFORMING MENSURATION AND CALCULATION (PMC)

Objects The learners demonstrate an The learners shall be able to LO 1. Select measuring instrument TLE_IAEPAS9-
- Cylindrical objects understanding of the perform mensuration and 1.1 Identify object or component to be measured 12PMC-Ig-h-9
- Rectangular objects underlying principles in calculation in line with job 1.2 Obtain correct specifications from relevant
- Cubes measurements and requirements source
- Triangular objects calculations in line with job 1.3 Select measuring tools in line with job
Components requirements requirements
- Resistor

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 11 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Capacitors
- Coil
- Transistors
- ICs
Specifications of objects and
components
Measuring instruments
- Vernier caliper
- English/Metric rule
- Torque gauge
- Tri-square
- Protractor
- Combination gauge

Mensuration /Calculations LO 2. Carry out measurement and TLE_IAEPAS9-


- Volume calculation 12PMC-Ih-j-10
- Area 2.1 Select appropriate measuring instrument
- Displacement 2.2 Obtain accurate measurements for job
- Inside diameter 2.3 Perform calculation needed to complete work
- Circumference tasks are using the four basic process of
- Length addition (+), subtraction (-), multiplication
- Thickness (x), and division ()
- Outside diameter 2.4 Use calculation involving fractions,
- Taper percentages and mixed numbers to complete
Ohms Law workplace tasks
- Series circuit 2.5 Check numerical computation for accuracy
- Parallel circuit 2.6 Read instruments to the limit of accuracy
- Combination of series and
parallel circuit

Maintenance of measuring LO 3. Maintain measuring instruments TLE_IAEPAS9-


instruments 3.1 Handle measuring instruments without 12PMC-Ij-11
- 5S damage
- Lubrication 3.2 Clean measuring instruments before and after
- Cleaning using
- Storage 3.3 Undertake proper storage of instruments
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 12 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LESSON 4: PREPARING AND INTERPRETING TECHNICAL DRAWINGS (PITD)
Technical drawings The learners demonstrate an The learners shall be able to LO 1. Identify different kinds of technical TLE_IAEPAS9-
- Schematic diagrams understanding of the prepare and interpret technical drawings 12PITD-IIa-12
- Charts concepts in interpreting drawings according to job 1.1 Select appropriate technical drawing
- Block diagrams simple technical drawings requirements and company according to job requirements
- Layout plans and electronics diagram procedures 1.2 Segregate technical drawings in accordance
- Location plans according to job with the types and kinds of drawings
- Process and requirements and company
instrumentation diagrams procedures
- Loop diagrams
Electronics components and
symbols identification
- Type of component
Electronic components LO 2. Interpret technical drawing TLE_IAEPAS9-
Measurements and 2.1 Recognize components, assemblies, or objects 12PITD-IIb-c-
dimensions of a given object 2.2 Correctly identify the dimensions of the key 13
Electronic components and features of the objects depicted in the
symbol drawing
- NEC- National Electric Code 2.3 Interpret the symbols used in the drawing
- IEC -International 2.4 Validate the drawing against job requirements
Electrotechnical or equipment
Commission
- ASME - American Society
of Mechanical Engineers
- IEEE - Institute of Electrical
and Electronics Engineers
- ISA - Instrumentation
System and Automation
Society
Job requirements
Drawing instruments/
equipment
- Components/dividers
- Drawing boards
- Rulers
- T-square
- Calculator

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 13 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Electrical/electronic diagrams LO 3. Prepare/make changes to electrical/ TLE_IAEPAS9-
- Schematic electronic schematics and drawings 12PITD-IIc-d-
- Block 3.1 Identify electrical/electronic schematic 14
- Location plan symbols correctly
- Layout plans 3.2 Use equipment according to job requirements
- System control diagrams in drawing electrical/ electronic schematic
- Process and correctly
instrumentation diagram
Equipment
- Components/dividers
- Drawing boards
- Rulers
- T-square
- Calculator
Care and maintenance LO 4. Store technical drawings and TLE_IAEPAS9-
- 5S equipment /instruments 12PITD-IIe-15
Inventory and recording 4.1 Undertake care and maintenance of drawings
procedures in accordance with company procedures
- Classifying 4.2 Prepare inventory of technical drawings in
- Tagging accordance with company procedures
- Recording 4.3 Undertake proper storage of instruments
Proper storage in accordance with company procedures
LESSON 5: USING AND MAINTAINING HAND TOOLS (UMHT)
Planning for task The learners demonstrate an The learners shall be able to use LO 1. Plan for tasks to be undertaken TLE_IAEPAS9-
Selection of tools for task understanding of the and maintain hand tools based on 1.1 Identify tasks to be undertaken properly 12UMHT-IIf-16
Hand tools for underlying principles in the standard company procedures 1.2 Choose appropriate hand tools according to
- Adjusting use and maintenance of task requirements
- Dismantling electronic hand tools based
- Assembling on standard company
- Finishing procedures
- Cutting
Inspection of hand tools LO 2. Prepare hand tools TLE_IAEPAS9-
Hand tools; set of: 2.1 Check appropriate hand tools for proper 12UMHT-IIg-17
- Screwdrivers operation and safety
- Pliers 2.2 Mark unsafe or faulty tools for repair in
- Wrenches accordance with standard company procedure
- Files

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 14 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Hand drills
- Hacksaw
- Tin snips
Standard company
procedure for unsafe and
faulty tools
- Identifying
- Marking
- Repairing
Proper use of tools for a LO 3 Use appropriate hand tools and TLE_IAEPAS9-
job/task equipment 12UMHT-IIh-i-
Safety in using tools 3.1 Use tools according to the tasks to be 18
Personal Protective undertaken
Equipment (PPE) for 3.2 Observe safety procedures in using tools at all
- Hands times and use appropriate PPE
- Face 3.3 Report malfunctions, unplanned or unusual
- Body events to the supervisor
Reporting unusual events
Maintain hand tools LO 4. Maintain hand tools TLE_IAEPAS9-
- Cleaning 4.1 Handle tools without damage according to 12UMHT-IIi-j-
- Lubricating procedures 19
- Tightening 4.2 Undergo routine maintenance of tools
- Tools repairs according to standard operational procedures,
- Adjusting using correct principles and techniques
procedures 4.3 Store tools safely in appropriate locations in
- Sharpening accordance with manufacturers specifications
Proper storage of tools
Maintenance schedule
LESSON 6: TERMINATING AND CONNECTING ELECTRICAL WIRING AND ELECTRONIC CIRCUITS (TCEC)
Material specification The learners demonstrate an The learners shall be able to LO 1. Plan and prepare for
- Assorted wires and cables understanding of the terminate and connect electrical termination/connection of electrical TLE_IAEPAS9-
Task requirements underlying principles in wiring and electronic circuit based wiring/electronics circuits 12TCEC-IIIa-20
- Splicing terminating and connecting on standards and work site 1.1 Check materials in accordance with
- Jointing electrical wiring and procedures specifications and tasks
- Soldering electronic circuits based on 1.2 Select appropriate tools and equipment in
Tools and equipment standards and work site accordance with tasks requirements
- Pliers procedures

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 15 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Cutters 1.3 Plan task to ensure that OHS guidelines and
- Screw driver procedures are followed
- Soldering gun 1.4 Prepare electrical wiring/electronic circuits
- Multitester correctly prepared for connecting/ termination
OHS guidelines and in accordance with instructions and work site
procedures procedures
Electrical wiring diagram
Electronics kit
Safety in handling tools LO 2. Terminate/connect electrical TLE_IAEPAS9-
PPE wiring/electronic circuits 12TCEC-IIIb-c-
Workplace safety 2.1 Observe safety procedures in using tools and 21
Methods of terminating/ use personal protective equipment
connecting electrical wiring/ 2.2 Undertake work safely in accordance with the
electronic circuit as per workplace and standard procedures
specification and 2.3 Use appropriate range of methods in
manufacturers requirements termination/connection in accordance with
- Clamping specifications, manufacturers requirements
- Pin connection and safety
- Soldered joints 2.4 Follow sequence of operation correctly
- Plugs according to job specifications
Sequencing of operation 2.5 Adjust accessories used, if necessary
Proper settings and 2.6 Confirm termination/connection undertaken
adjustments of accessories successfully in accordance with job
Reporting specification

Testing procedure of LO 3. Test termination/connections of TLE_IAEPAS9-


electrical wiring/ electronic electrical wiring/electronics circuits 12TCEC-IIId-e-
- Multitester 3.1 Conduct testing of all completed termination/ 22
Safety precautions in connections of electric wiring/electronic
terminating/connecting circuits in compliance with specifications and
electrical wiring/ electronic regulations using appropriate procedures and
circuit equipment
- PPE 3.2 Check wiring and circuits using specified
testing procedures
3.3 Respond to unplanned events or conditions in
accordance with established procedures

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 16 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LESSON 7: TESTING ELECTRONIC COMPONENTS (TEC)

Work instructions The learners demonstrate an The learners shall be able to test LO 1. Determine criteria for testing TLE_IAEPAS9-
- Job order understanding of the electronic components based on electronics components 12TEC-IIIf-23
- Work order underlying principles in manufacturers specifications and 1.1 Clarify work instructions based on job order or
Person in charge testing electronic testing criteria client requirements
- Supervisor components based on 1.2 Consult responsible person for effective and
- Manager manufacturers specifications proper work coordination
- Instructor and testing criteria 1.3 Interpret datasheets/application notes based
Criteria for testing on manufacturers specifications
components 1.4 Define testing criteria to ensure that
- controls components meet technical and quality
- functionality, including requirements
flow 1.5 Discuss testing criteria to relevant personnel
- interoperability
- performance
- reliability

Methods of testing LO 2. Plan an approach for component TLE_IAEPAS9-


components testing 12TEC-IIIg-24
- automated 2.1 Identify various testing methods based on the
- inspection types of electronic components
- platform testing 2.2 Determine the characteristics and
- prototyping appropriateness of testing methods to be
Testing strategy used during development and on completion
- Passive testing 2.3 Consider testing methods in relation to
- Dynamic testing appropriate testing strategy
- In-circuit testing 2.4 Develop a plan for testing components at
specified points during development and on
completion
2.5 Check required test and measuring
instruments and tools in accordance with
established procedures
2.6 Establish a recording system to document
testing results, including problems and faults

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 17 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE

Test and measuring LO 3. Test components TLE_IAEPAS9-


instruments 3.1 Apply testing methods to ensure that the 12TEC-IIIh-i-25
- Variable DC power supply products meet creative, production, and
- Digital VOM technical requirements
- analog VOM 3.2 Record problems and faults detected by
- dual trace triggered testing and document remedial steps taken in
oscilloscope records system
- function generator 3.3 Resolve problems and faults detected during
Tools testing in accordance with agreed project or
Record system industry practice
- description of fault 3.4 Evaluate final products against the previously
- identification of code determined criteria
- user responses 3.5 Document testing process and submit
- written or verbal summarized evaluation report to relevant
comments personnel
- retest result

Evaluation of the testing LO 4. Evaluate the testing process TLE_IAEPAS9-


process 4.1 Identify successful testing methods and those 12TEC-IIIj-26
- Proper handling of that led to difficulties based on industry
components standards
- Proper use of equipment 4.2 Evaluate testing process and records system
and instruments based on standard procedures
- Proper handling of tools 4.3 Document test results/findings for subsequent
- OHS policies and components testing
guidelines
- 5S
Documentation of testing
result

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 18 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
CORE COMPETENCIES
LESSON 8: ASSEMBLING ELECTRONIC PRODUCTS (AEP)
OHS policies and procedure The learners demonstrate an The learners shall be able to LO 1. Prepare to assemble electronics TLE_IAEPAS9-
Hazard and risk assessment understanding of concepts assemble electronic products product 12AEP-IVa-27
mechanisms and underlying principles in based task requirements and 1.1 Prepare assembly workplace in accordance
Use of protective equipment assembling electronic acceptable procedures and with OHS policies and procedures
and clothing products based on task standards 1.2 Follow established risk control measures for
Philippine Electronics Code requirement and acceptable work preparation
(PEC) procedures and standards 1.3 Clarify work instructions based on job order or
Materials, tools, and client requirements
equipment uses and 1.4 Consult a responsible person for effective and
specifications proper work coordination
Identification of hand tools 1.5 Check required materials, tools, and
Proper care and use of Hand equipment in accordance with established
tools procedures
Preparing the assembly 1.6 Obtain parts and components needed to
workplace complete the work in accordance with
requirements
Electronics theory LO 2. Prepare/make PCB modules TLE_IAEPAS9-
PCB problems and solutions 2.1 Verify PCB layout for conformity with the 12AEP-IVb-c-28
PCB Manufacturing schematic diagram in accordance with the
Information layout rules
PCB characteristics 2.2 Transfer PCB layout to copper-clad board
Design compliance with EMI following acceptable methods and standards
/ EMC 2.3 Perform visual inspection
PCB Layout and Artwork 2.4 Drill thru-hole
Acceptable methods 2.5 Clean PCB based on standards procedures
- Silk screen 2.6 Test functionality of PCB and perform visual
- Photo transfer inspection
Fabrication
Blanking, cutting, punching,
drilling
Laminating techniques
Plating, etching, surface
finishing
Coatings

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 19 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Soldering principles LO 3. Mount and solder electronic TLE_IAEPAS9-
- The four key principles to components 12AEP-IVc-f-29
producing a good joint 3.1 Apply knowledge on lead and lead-free
Soldering technology soldering characteristics and requirements in
- Reflow soldering mounting and soldering process in accordance
- Wave soldering with OHS standards
- Hand soldering 3.2 Mount and solder components in accordance
- RoHS and lead-free with soldering principles
soldering 3.3 Apply soldering/desoldering techniques and
- Nonsolder Connections procedures in accordance with established
(terminal block standards and requirements
- Cleaning 3.4 Check soldered products in accordance with
- Repair and rework international standards and task specifications
- Safety
Mounting of components
- Surface mount
components and devices
- Thru-hole mount
components and devices
- Thermal and vibration
theories
Soldering/desoldering
procedures
- Hot iron soldering
procedures
- Hot air soldering
procedures
Familiarize with the product LO 4. Perform Electronic Products Assembly TLE_IAEPAS9-
diagram 4.1 Follow work instructions based on job order 12AEP-IVf-i-30
3Rs waste management or client requirements
program 4.2 Perform assembly procedures in accordance
Rules and conventions with OHS policies and work instructions
Philippine Electronics Code 4.3 Connect and/or integrate modules and
RoHS/WEEE Directives accessories into the final product based on
- Restrictions on Hazardous the client specifications
Substance 4.4 Dispose excess components and materials
based on WEEE directives and 3Rs waste
management program
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 20 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Waste on
electrical/electronic
equipment
RA 9292 ECE Law on
product assembly
Assembling product
Testing LO 5. Test and inspect assembled electronic TLE_IAEPAS9-
- Aging test products 12AEP-IVi-j-31
- Substitution test 5.1 Subject finished products to final
- Mechanical testing visual/sensory inspection and testing in
Environmental safety accordance with quality standards,
- Work safety requirements procedures, and requirements
and economy of materials 5.2 Perform mechanical and electrical/electronic
with durability testing in accordance with quality standards,
- Knowledge in 5S procedures, and requirements
application and 5.3 Document work completion and inform
observation of required responsible person in accordance with
time frame established procedures
- Testing procedure 5.4 Observe housekeeping procedures in
accordance with 5S discipline and established
procedures
LESSON 9: SERVICING CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS-DOMESTIC ELECTRONIC APPLIANCES WITH ELECTRIC MOTOR (SCEP-DEAEM)
Service information The learners demonstrate an The learners shall be able to LO 1. Prepare unit, tools, and workplace for TLE_IAEPAS9-
- Job report sheets understanding of concepts service consumer electronic installation and service 12SCEP-
- Job order and underlying principles in products and systems (products Conduct complete checkup of consumer DEAEM-Ia-b-32
- Bill of materials servicing consumer electronic with electric motors) based on electronic products and systems and verify
- Customer index products and systems based clients requirements and as per defects against customer description
- Service flowchart on clients requirements and standard procedure Acquire manuals and service information
- Stock and inventory as per standard procedure required for installation as per standard
record procedure
- Requisition slips (for Verify repair/maintenance history in line with
acquisition of parts) the company procedures
- Supplier Index Set/prepare workplace for installation job in
Domestic Electronic line with the clients requirements
Appliances Prepare necessary tools, test instruments, and
- Electronic-controlled PPE in line with job requirements
electric fan

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 21 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Electronic-controlled
Washing machines
- Home food Processing
equipment
Service manuals of domestic
electronic appliances (with
electric motor)
Tools, materials, and test
instruments for servicing
tools
- Variable power supply
- Step-down transformer
- Soldering iron/gun
- Desoldering tools
- Screwdriver (assorted)
- Wrenches (assorted)
- Allen wrench/key
- Utility knife/stripper
- Pliers (assorted)
- High-grade magnifying
glass with lamp
- Flashlight
- Cleaning brush
- High voltage probe
- Ball peen hammer
Instruments
- Multitesters
(analog/digital)
- ESD-free work bench with
mirror
Materials
- Soldering lead
- Hook-up wires
- Assorted electronic
components
Servicing Workplace
OHS and PPE
Service information
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 22 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Service Manuals LO 2. Install consumer electronic products TLE_IAEPAS9-
Pretesting Procedures and systems 12SCEP-
Installation Procedures 2.1 Obtain materials necessary to complete the DEAEM-Ib-d-33
Service information work in accordance with job requirements
- Job report sheets 2.2 Install consumer electronic products and
systems in accordance with manufacturers
instructions, requirements, and without
damage to the surrounding place or
environment
2.3 Test devices in accordance with standard
procedures
2.4 Undertake final inspections to ensure that
the installed device conforms to technical
requirements
2.5 Respond to unplanned events or conditions
in accordance with established procedures
2.6 Clean/clear work site of all debris and left
safe in accordance with the company
requirements
2.7 Prepare report on installation and testing of
equipment according to companys
procedures/policies
Pretesting procedure LO 3. Diagnose faults and defects of TLE_IAEPAS9-
- Visual inspection consumer electronic products and systems 12SCEP-
- Interview of customer 3.1 Observe systematic pretesting procedure in DEAEM-Ie-f-34
- Operate the unit accordance with manufacturers instructions
Systems defects/fault 3.2 Identify system defects/fault symptoms using
symptoms appropriate tools and equipment and
Troubleshooting techniques troubleshooting techniques in accordance
- Sensory method with safety procedures
Visual 3.3 Use test instruments required for the job in
Listening to telltale accordance with user manuals
sound 3.4 Isolate circuits using specified testing
Look out for unusual procedures
smell 3.5 Explain identified defects and faults to the
Touching or feeling responsible person in accordance with
- Component substitution enterprise or company policy and procedures
- Signal injection and 3.6 Check control settings/adjustments in
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 23 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
tracing conformity with service-manual specifications
- Voltage and current 3.7 Document results of diagnosis and testing
measurements accurately and completely within the
- Resistance check specified time
- Waveform analysis 3.8 Advise/inform customers regarding the status
- Display analysis and serviceability of the unit according to
- Circuit analysis procedures
Responsible persons
- Manager
- Supervisor
Service information
- Customer index
- Service flowchart/forms
PPE LO 4. Maintain/repair consumer electronic TLE_IAEPAS9-
- Head protection products 12SCEP-
- Hand protection 4.1 Use personal protective equipment in DEAEM-If-i-35
- Body protection accordance with OHS practices
- Lower body protection 4.2 Follow electro-static discharge (ESD)
OHS protection procedure in accordance with
ESD protection procedure current industry standards
Disassembling procedure 4.3 Replace defective parts/components with
Troubleshooting Techniques identical or recommended appropriate
- Sensory method equivalent ratings
- Component substitution 4.4 Solder/mount repaired or replaced
- Voltage and current parts/components in accordance with the
measurement current industry standards.
- Resistance/ continuity 4.5 Perform control settings/adjustments in
measurement conformity with service-manual specifications
- Circuit analysis and 4.6 Undergo repair activity within the required
isolation techniques timeframe
Soldering techniques 4.7 Observe care and extreme precaution in
PPE/ OHS handling the unit/product as per procedures
5S 4.8 Perform cleaning of unit in accordance with
Environmental Safety standard procedures
- WEEE 4.9 Dispose excess components and materials
- 3Rs based on WEEE directives and 3Rs waste
- RoHS management program

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 24 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Reassembling procedure LO 5. Reassemble and test repaired TLE_IAEPAS9-
Testing procedure consumer electronic product 12SCEP-
Service Information 5.1 Re-assemble repaired units according to DEAEM-Ij-36
- Service flow chart procedures
- Job report sheets 5.2 Subject reassembled units to final testing and
Environmental requirements cleaning in conformity with manufacturers
specifications
5.3 Comply to service completion procedures and
documentations based on manual
5.4 Dispose waste materials in accordance with
environmental requirements
LESSON 10: SERVICING CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS - DOMESTIC ELECTRONIC APPLIANCES WITH HEATING COMPONENT (SCEP-
DEAHC)
Service information The learners demonstrate an The learners shall be able to LO 1. Prepare unit, tools, and workplace for TLE_IAEPAS9-
- Job report sheets understanding of concepts service consumer electronic installation and service 12SCEP-
- Job order and underlying principles in products and systems (appliance 1.1 Conduct complete checkup of consumer DEAHC-IIa-b-
- Bill of materials servicing consumer electronic with heating components) based electronic products and systems and verify 37
- Customer index products and systems based on clients requirements and as defects against customer description
- Service flowchart on clients requirements and per standard procedure 1.2 Acquire manuals and service information
- Stock and inventory as per standard procedure required for installation as per standard
record procedure
- Requisition slips (for 1.3 Verify repair/maintenance history in line with
acquisition of parts) the company procedures
- Supplier index 1.4 Set/prepare workplace for installation job in
Domestic Electronic line with the clients requirements
Appliances 1.5 Prepare necessary tools, test instruments
- Electric oven and personal protective equipment in line
- Rice cooker with job requirements
- Microwave oven
Service manuals of domestic
electronic appliances (with
heating elements)
Tools, materials, and test
instruments for servicing
tools
- Soldering iron/gun
- Desoldering tools

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 25 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Screwdriver (assorted)
- Wrenches (assorted)
- Allen wrench/key
- Utility knife/stripper
- Pliers (assorted)
- High-grade magnifying
glass with lamp
- Flashlight
- Cleaning brush
- High voltage probe
- Ball peen hammer
Instruments
- Multitesters
(analog/digital)
- Test jig
- ESD-free work bench with
mirror
Materials
- Soldering lead
- Hook-up wires
- Assorted electronic
components
Proper use and care
Servicing Workplace
OHS and PPE
Service information
Service manuals LO 2. Install consumer electronic products TLE_IAEPAS9-
Pretesting procedures and systems 12SCEP-
Installation procedures 2.1 Obtain materials necessary to complete the DEAHC-IIb-d-
Service information work are obtained in accordance with job 38
- Job report sheets requirements
2.2 Install consumer electronic products and
systems in accordance with manufacturers
instructions, requirements, and without
damage to the surrounding place or environment
2.3 Test devices in accordance with standard
procedures
2.4 Undertake final inspections to ensure that the
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 26 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
installed device conforms to technical
requirements
2.5 Respond to unplanned events or conditions in
accordance with established procedures
2.6 Clean/clear work site of all debris and left safe
in accordance with the company requirements
2.7 Prepare report on installation and testing of
equipment according to companys
procedures/policies
Pre-testing procedure LO 3. Diagnose faults and defects of TLE_IAEPAS9-
- Visual inspection consumer electronic products and systems 12SCEP-
- Interview of customer 3.1 Observe systematic pretesting procedure in DEAHC-IIe-j-39
- Operate the unit accordance with manufacturers instructions
Systems defects/fault 3.2 Identify system defects/fault symptoms using
symptoms appropriate tools and equipment and
Troubleshooting techniques troubleshooting techniques in accordance
- Sensory method with safety procedures
Visual 3.3 Use test instruments required for the job in
Listening to telltale accordance with user manuals
sound 3.4 Isolate circuits using specified testing
Look out for unusual procedures
smell 3.5 Explain identified defects and faults to the
Touching or feeling responsible person in accordance with
- Component substitution enterprise or company policy and procedures
- Signal injection and 3.6 Check control settings/adjustments in
tracing conformity with service-manual specifications
- Voltage and current 3.7 Document results of diagnosis and testing
measurements accurately and completely within the
- Resistance check specified time
- Waveform analysis 3.8 Advise/inform customers regarding the status
- Display analysis and serviceability of the unit according to
- Circuit analysis procedures
Responsible persons
- Manager
- Supervisor
Service information
- Customer index
- Service flowchart/ forms
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 27 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Personal Protective LO 4. Maintain/repair consumer electronic TLE_IAEPAS9-
Equipment products 12SCEP-
- Head protection 4.1 Use personal protective equipment in DEAHC-IIIa-h-
- Hand protection accordance with Occupational Health and 40
- Body protection Safety practices.
- Lower body protection 4.2 Follow electro-static discharge (ESD)
OHS protection procedure in accordance with
ESD protection procedure current industry standards.
Disassembling procedure 4.3 Replace defective parts/components with
Troubleshooting Techniques identical or recommended appropriate
- Sensory method equivalent ratings
- Component substitution 4.4 Solder/mount repaired or replaced
- Voltage and current parts/components in accordance with the
measurement current industry standards
- Resistance/ continuity 4.5 Perform control settings/adjustments in
measurement conformity with service-manual specifications
- Circuit analysis and 4.6 Undergo repair activity within the required
isolation techniques timeframe
Soldering techniques 4.7 Observe care and extreme precaution in
PPE/ OHS handling the unit/product as per procedures
5S 4.8 Perform cleaning of unit in accordance with
Environmental Safety standard procedures
- WEEE 4.9 Dispose excess components and materials
- 3Rs based on WEEE directives and 3Rs waste
- RoHS management program

Reassembling procedure LO 5. Reassemble and test repaired TLE_IAEPAS9-


Testing procedure consumer electronic product 12SCEP-
Service information 5.1 Reassemble repaired units according to DEAHC-IIIh-j-
- Service flow chart procedures 41
- Job report sheets 5.2 Subject reassembled units to final testing and
Environmental requirements cleaning in conformity with manufacturers
specifications
5.3 Comply to service completion procedures and
documentations based on manual
5.4 Dispose waste materials in accordance with
environmental requirements

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 28 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LESSON 11: SERVICING CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS - DOMESTIC ELECTRONIC APPLIANCES RECHARGEABLE AND ELECTRONIC-
CONTROLLED LIGHTING UNITS (SCEP-DEARE)
Service information The learners demonstrate an The learners shall be able to LO 1. Prepare unit, tools, and workplace for TLE_IAEPAS9-
- Job report sheets understanding of concepts service consumer electronic installation and service 12SCEP-DEARE-
- Job order and underlying principles in products and systems 1.1 Conduct complete checkup of consumer IVa-b-42
- Bill of materials servicing consumer electronic (rechargeable and electronic- electronic products and systems and verify
- Customer index products and systems based controlled lighting units and defects against customer description
- Service flowchart on clients requirements and charging system) based on clients 1.2 Acquire manuals and service information
- Stock and inventory as per standard procedure requirements and as per standard required for installation as per standard
record procedure procedure
- Requisition slips (for 1.3 Verify repair/maintenance history in line with
acquisition of parts) the company procedures.
- Supplier index 1.4 Set/prepare workplace for installation job in
Domestic electronic line with the clients requirements
Appliances 1.5 Prepare necessary tools, test instruments,
- Rechargeable lighting unit and PPE in line with job requirements
- Electronic-controlled
lighting unit
Service Manuals of domestic
electronic appliances
(Rechargeable light,
electronic-controlled lighting
unit)
Tools, materials, and test
instruments for servicing
tools
- Variable power supply
- Step-down transformer
- Soldering iron/gun
- Desoldering tools
- Screwdriver (assorted)
- Wrenches (assorted)
- Allen wrench/key
- Utility knife/stripper
- Pliers (assorted)
- High-grade magnifying
glass with lamp
- Flashlight
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 29 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Cleaning brush
- High voltage probe
- Ball peen hammer
Instruments
- Multitesters
(analog/digital)
- Test jig
- ESD-free work bench with
mirror
Materials
- Soldering lead
- Hook-up wires
- Assorted electronic
components
Proper use and care
Servicing Workplace
OHS and PPE
Service information
Service Manuals LO 2. Install consumer electronic products TLE_IAEPAS9-
Waste from Electrical and and systems 12SCEP-DEARE-
Electronic Equipment 2.1 Obtain materials necessary to complete the IVb-f-43
(WEEE) requirements work are obtained in accordance with job
Pretesting procedures requirements
Installation procedures 2.2 Install consumer electronic products and
Service information systems in accordance with manufacturers
- Job report sheets instructions, requirements, and without
damage to the surrounding place or
environment
2.3 Test devices in accordance with standard
procedures
2.4 Undertake final inspections to ensure that
the installed device conforms to technical
requirements
2.5 Respond to unplanned events or conditions
in accordance with established procedures
2.6 Clean/clear work site of all debris and left
safe in accordance with the company
requirements
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 30 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
2.7 Prepare report on installation and testing of
equipment according to company
procedures/policies
Pretesting procedure LO 3. Diagnose faults and defects of TLE_IAEPAS9-
- Visual inspection consumer electronic products and systems 12SCEP-DEARE-
- Interview of customer 3.1 Observe systematic pretesting procedure in IVf-h-44
- Operate the unit accordance with manufacturers instructions
Systems defects/Fault 3.2 Identify system defects/fault symptoms using
symptoms appropriate tools and equipment and
Troubleshooting techniques troubleshooting techniques in accordance
- Sensory method with safety procedures
Visual 3.3 Use test instruments required for the job in
Listening to telltale accordance with user manuals
sound 3.4 Isolate circuits using specified testing
Look out for unusual procedures
smell 3.5 Explain identified defects and faults to the
Touching or feeling responsible person in accordance with
- Component substitution enterprise or company policy and procedures
- Signal injection and 3.6 Check control settings/adjustments in
tracing conformity with service-manual specifications
- Voltage and current 3.7 Document results of diagnosis and testing
measurements accurately and completely within the
- Resistance check specified time
- Waveform analysis 3.8 Advise/Inform customers regarding the
- Display analysis status and serviceability of the unit according
- Circuit analysis to procedures
Responsible persons
- Manager
- Supervisor
Service information
- Customer index
- Service flowchart/forms
PPE LO 4. Maintain/repair consumer electronic TLE_IAEPAS9-
- Head protection products 12SCEP-DEARE-
- Hand protection 4.1 Use personal protective equipment in IVi-j-Ia-c-45
- Body protection accordance with OHS practices.
- Lower body protection 4.2 Follow electro-static discharge (ESD)
protection procedure in accordance with
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 31 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
OHS current industry standards
ESD protection procedure 4.3 Replace defective parts/components with
Disassembling procedure identical or recommended appropriate
Troubleshooting Techniques equivalent ratings
- Sensory method 4.4 Solder/mount repaired or replaced
- Component substitution parts/components in accordance with the
- Voltage and current current industry standards
measurement 4.5 Perform control settings/adjustments in
- Resistance/ continuity conformity with service-manual specifications
measurement 4.6 Undergo repair activity within the required
- Circuit analysis and timeframe
isolation techniques 4.7 Observe care and extreme precaution in
Soldering techniques handling the unit/product as per procedures
PPE/OHS 4.8 Perform cleaning of unit in accordance with
5S standard procedures
Environmental Safety 4.9 Dispose excess components and materials
- WEEE based on WEEE directives and 3Rs waste
- 3Rs management program
- OHS
Reassembling procedure LO 5. Reassemble and test repaired TLE_IAEPAS9-
Testing procedure consumer electronic product 12SCEP-DEARE-
Service information 5.1 Reassemble repaired units according to Id-e-46
- Service flow chart procedures
- Job report sheets 5.2 Subject reassembled units to final testing and
Environmental Requirements cleaning in conformity with manufacturers
specifications
5.3 Comply to service completion procedures and
documentations based on manual
5.4 Dispose of waste materials in accordance
with environmental requirements
LESSON 12: SERVICING CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS - DOMESTIC ELECTRONIC APPLIANCES - SECURITY AND SOLAR POWER
MANAGEMENT SYSTEM (SCEP-DEASS)
Service information The learner demonstrates an The learners shall be able to LO 1. Prepare unit, tools, and workplace for TLE_IAEPAS9-
- Job report sheets understanding of concepts service home security equipment installation and service 12SCEP-DEASS-
- Job order and underlying principles in and solar powered management 1.1 Conduct complete check-up of consumer If-g-47
- Bill of materials servicing consumer electronic system based on clients electronic products and systems and verify
- Customer index products and systems based requirements and as per standard defects against customer description

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 32 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Service flowchart on clients requirements and procedure 1.2 Acquire manuals and service information
- Stock and inventory as per standard procedure required for installation as per standard
record procedure
- Requisition slips (for 1.3 Verify repair/maintenance history in line with
acquisition of parts) the company procedures
- Supplier Index 1.4 Set/prepare workplace for installation job in
Domestic Electronic line with the clients requirements
Appliances 1.5 Prepare necessary tools, test instruments
- Home security equipment and PPE in line with job requirements
CCTV
Fire alarm system
Intruder alarm
- Solar powered
management system
Service manuals of domestic
electronic appliances (home
security system, solar power
system)
Tools, materials, and test
instruments for servicing
tools
- Variable power supply
- Step-down transformer
- Soldering iron/gun
- Desoldering tools
- Screwdriver (assorted)
- Wrenches (assorted)
- Allen wrench/key
- Utility knife/stripper
- Pliers (assorted)
- High-grade magnifying
glass with lamp
- Flashlight
- Cleaning brush
- High voltage probe
- Ball peen hammer
Instruments
- Signal generator - AF/RF
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 33 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Multitesters
(analog/digital)
- Test jig
- ESD-free work bench with
mirror
- Oscilloscope
Materials
- Soldering lead
- Hook-up wires
- Assorted electronic
components
Proper use and care
Servicing Workplace
OHS and PPE
Service information
Service manuals LO 2. Install consumer electronic products TLE_IAEPAS9-
Waste from Electrical and and systems 12SCEP-DEASS-
Electronic Equipment 2.1 Obtain materials necessary to complete the Ig-j-48
(WEEE) requirements work are obtained in accordance with job
Pretesting procedures requirements
Installation procedures 2.2 Install consumer electronic products and
Service information systems in accordance with manufacturers
- Job report sheets instructions, requirements, and without
damage to the surrounding place or
environment
2.3 Test devices in accordance with standard
procedures.
2.4 Undertake final inspections to ensure that
the installed device conforms to technical
requirements
2.5 Respond to unplanned events or conditions
in accordance with established procedures
2.6 Clean/clear work site of all debris and left
safe in accordance with the company
requirements
2.7 Prepare report on installation and testing of
equipment according to companys
procedures/policies
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 34 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Pretesting procedure LO 3. Diagnose faults and defects of TLE_IAEPAS9-
- Visual inspection consumer electronic products and systems 12SCEP-DEASS-
- Interview of customer 3.1 Observe systematic pretesting procedure in IIa-c-49
- Operate the unit accordance with manufacturers instructions
Systems defects/Fault 3.2 Identify system defects/fault symptoms using
symptoms appropriate tools and equipment and
Troubleshooting techniques troubleshooting techniques in accordance
- Sensory method with safety procedures
Visual 3.3 Use test instruments required for the job in
Listening to telltale accordance with user manuals
sound 3.4 Isolate circuits using specified testing
Look out for unusual procedures
smell 3.5 Explain identified defects and faults to the
Touching or feeling responsible person in accordance with
- Component substitution enterprise or company policy and procedures
- Signal injection and 3.6 Check control settings/adjustments in
tracing conformity with service-manual
- Voltage and current specifications.
measurements 3.7 Document results of diagnosis and testing
- Resistance check accurately and completely within the
- Waveform analysis specified time
- Display analysis 3.8 Advise/inform customers regarding the status
- Circuit analysis and serviceability of the unit according to
Responsible persons procedures
- Manager
- Supervisor
Service information
- Customer index
- Service flowchart/forms
PPE LO 4. Maintain/repair consumer electronic TLE_IAEPAS9-
- Head protection products 12SCEP-DEASS-
- Hand protection 4.1 Use personal protective equipment in IId-h-50
- Body protection accordance with OHS practices
- Lower body protection 4.2 Follow electro-static discharge (ESD)
OHS protection procedure in accordance with
ESD protection procedure current industry standards.
Disassembling procedure 4.3 Replace defective parts/components with
Troubleshooting Techniques identical or recommended appropriate
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 35 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Sensory method equivalent ratings
- Component substitution 4.4 Solder/mount repaired or replaced
- Voltage and current parts/components in accordance with the
measurement current industry standards
- Resistance/ continuity 4.5 Perform control settings/adjustments in
measurement conformity with service-manual specifications
- Circuit analysis and 4.6 Undergo repair activity within the required
isolation techniques timeframe
Soldering techniques 4.7 Observe care and extreme precaution in
PPE/ OHS handling the unit/product as per procedures
5S 4.8 Perform cleaning of unit in accordance with
Environmental Safety standard procedures
- WEEE 4.9 Dispose excess components and materials
- 3Rs based on WEEE directives and 3Rs waste
- RoHS management program
Reassembling procedure LO 5. Reassemble and test repaired TLE_IAEPAS9-
Testing procedure consumer electronic product 12SCEP-DEASS-
Service Information 5.1 Reassemble repaired units according to IIi-j-51
- Service flow chart procedures
- Job report sheets 5.2 Subject reassembled units to final testing and
Environmental Requirements cleaning in conformity with manufacturers
specifications
5.3 Comply to service completion procedures and
documentations based on manual
5.4 Dispose of waste materials in accordance
with environmental requirements
LESSON 13: SERVICING CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS - AUDIO PRODUCTS AND SYSTEMS (SCEP-APS)
Service information The learners demonstrate an The learners shall be able to LO 1. Prepare unit, tools, and workplace for TLE_IAEPAS9-
- Job report sheets understanding of concepts service consumer electronic installation and service 12SCEP-APS-
- Job Order and underlying principles in products and systems (audio 1.1 Conduct complete checkup of consumer IIIa-c-52
- Bill of materials servicing consumer electronic products and systems) based on electronic products and systems and verify
- Customer index products and systems based customer description and defects against customer description
- Service flowchart on customer description and standard procedures 1.2 Acquire manuals and service information
- Stock and inventory standard procedures required for installation as per standard
record procedure.
- Requisition slips (for 1.3 Verify repair/maintenance history in line with
acquisition of parts) the company procedures

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 36 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Supplier index 1.4 Set/prepare workplace for installation job in
Domestic Electronic line with the clients requirements
Appliances 1.5 Prepare necessary tools, test instruments
- Radio receivers and personal protective equipment in line
- Audio recorders with job requirements
- Electronic musical
instruments/keyboard
- Professional audio/public
address system
Service Manuals of domestic
electronic appliances (audio
products)
Tools, Materials and Test
Instruments for Servicing
Tools
- Variable power supply
- Step-down transformer
- Soldering iron/gun
- Desoldering tools
- Screwdriver (assorted)
- Wrenches (assorted)
- Allen wrench/key
- Utility knife/stripper
- Pliers (assorted)
- High-grade magnifying
glass with lamp
- Flashlight
- Cleaning brush
- High voltage probe
- Ball peen hammer
Instruments
- Signal generator - AF/RF
- Multi-testers
(analog/digital)
- Test jig
- ESD-free work bench with
mirror
- Oscilloscope
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 37 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Materials
- Soldering lead
- Hook-up wires
- Assorted electronic
components
Proper use and care
Servicing Workplace
OH S and PPE
Service information
Service Manuals LO 2. Install consumer electronic products TLE_IAEPAS9-
Waste from Electrical and and systems 12SCEP-APS-
Electronic Equipment 2.1 Obtain materials necessary to complete the IIIc-e-53
(WEEE) requirements work are obtained in accordance with job
Pretesting Procedures requirements
Installation Procedures 2.2 Install consumer electronic products and
Service information systems in accordance with manufacturers
- Job report sheets instructions, requirements, and without
damage to the surrounding place or
environment
2.3 Test devices in accordance with standard
procedures
2.4 Undertake final inspections to ensure that
the installed device conforms to technical
requirements
2.5 Respond to unplanned events or conditions
in accordance with established procedures
2.6 Clean/clear work site of all debris and left
safe in accordance with the company
requirements
2.7 Prepare report on installation and testing of
equipment according to companys
procedures/policies
Pretesting procedure LO 3. Diagnose faults and defects of TLE_IAEPAS9-
- Visual inspection consumer electronic products and systems 12SCEP-APS-
- Interview of customer 3.1 Observe systematic pretesting procedure in IIIf-h-54
- Operate the unit accordance with manufacturers instructions
Systems defects/Fault 3.2 Identify system defects/fault symptoms
using appropriate tools and equipment and
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 38 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
symptoms troubleshooting techniques in accordance
Troubleshooting techniques with safety procedures
- Sensory method 3.3 Use test instruments required for the job in
Visual accordance with user manuals
Listening to telltale 3.4 Isolate circuits using specified testing
sound procedures
Look out for unusual 3.5 Explain identified defects and faults to the
smell responsible person in accordance with
Touching or feeling enterprise or company policy and procedures
- Component substitution 3.6 Check control settings/adjustments in
- Signal injection and conformity with service-manual specifications
tracing 3.7 Document results of diagnosis and testing
- Voltage and current accurately and completely within the
measurements specified time
- Resistance check 3.8 Advise/inform customers regarding the status
- Waveform analysis and serviceability of the unit according to
- Display analysis procedures
- Circuit analysis
Responsible persons
- Manager
- Supervisor
Service information
- Customer index
- Service flowchart/ forms
PPE LO 4. Maintain/repair consumer electronic TLE_IAEPAS9-
- Head protection products 12SCEP-APS-
- Hand protection 4.1 Use personal protective equipment in IIIh-j-IVa-c-55
- Body protection accordance with OHS practices
- Lower-body protection 4.2 Follow electro-static discharge (ESD)
OHS protection procedure in accordance with
ESD protection procedure current industry standards
Disassembling procedure 4.3 Replace defective parts/components with
Troubleshooting Techniques identical or recommended appropriate
- Sensory method equivalent ratings
- Component substitution 4.4 Solder/mount repaired or replaced
- Voltage and current parts/components in accordance with the
measurement current industry standards
- Resistance/ continuity 4.5 Perform control settings/adjustments in
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 39 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
measurement conformity with service-manual specifications
- Circuit analysis and 4.6 Undergo repair activity within the required
isolation techniques timeframe
Soldering techniques 4.7 Observe care and extreme precaution in
PPE/ OHS handling the unit/product as per procedures
5S 4.8 Perform cleaning of unit in accordance with
Environmental Safety standard procedures
- WEEE 4.9 Dispose excess components and materials
- 3Rs based on WEEE directives and 3Rs waste
- RoHS management program
Reassembling procedure LO 5. Re-assemble and test repaired TLE_IAEPAS9-
Testing procedure consumer electronic product 12SCEP-APS-
Service information 5.1 Reassemble repaired units according to IVc-e-56
- Service flow chart procedures
- Job report sheets 5.2 Subject reassembled units to final testing
Environmental requirements and cleaning in conformity with
manufacturers specifications
5.3 Comply to service completion procedures and
documentations based on manual
5.4 Dispose waste materials in accordance with
environmental requirements
LESSON14: SERVICING CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS- AUDIO-VIDEO PRODUCTS AND SYSTEMS (SCEP-AVP)
Service information The learners demonstrate an The learners shall be able to LO 1. Prepare unit, tools, and workplace for TLE_IAEPAS9-
- Job Report Sheets understanding of concepts service consumer electronic installation and service 12SCEP-AVP-
- Job Order and underlying principles in products and systems (audio- 1.1 Conduct complete checkup of consumer IVf-g-57
- Bill of materials servicing consumer electronic video products and systems) electronic products and systems and verify
- Customer index products and systems based based on customers description defects against customer description
- Service flowchart on customers description and and standard procedures 1.2 Acquire manuals and service information
- Stock and inventory standard procedures required for installation as per standard
record procedure
- Requisition slips (for 1.3 Verify repair/maintenance history in line with
acquisition of parts) the company procedures
- Supplier index 1.4 Set/prepare workplace for installation job in
Domestic electronic line with the clients requirements
appliances 1.5 Prepare necessary tools, test instruments,
- Videoke system and PPE in line with job requirements
- DVD/VCD player

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 40 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Television
- Home theater system
- PC monitors
Service manuals of domestic
electronic appliances (audio-
video system)
Tools, materials, and test
instruments for servicing
tools
- Variable power supply
- Step-down transformer
- Soldering iron/gun
- Desoldering tools
- Screwdriver (assorted)
- Wrenches (assorted)
- Allen wrench/key
- Utility knife/stripper
- Pliers (assorted)
- High-grade magnifying
glass with lamp
- Flashlight
- Cleaning brush
- High voltage probe
- Ball peen hammer
Instruments
- Signal generator - AF/RF
- Multi-testers
(analog/digital)
- Test jig
- ESD-free work bench with
mirror
- Oscilloscope
Materials
- Soldering lead
- Hook-up wires
- Assorted electronic
components
Proper use and care
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 41 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Servicing Workplace
OHS and PPE
Service information
Service manuals LO 2. Install consumer electronic products TLE_IAEPAS9-
Waste from Electrical and and systems 12SCEP-AVP-
Electronic Equipment 2.1 Obtain materials necessary to complete the IVg-j-Ia-b-58
(WEEE) requirements work are obtained in accordance with job
Pretesting procedures requirements
Installation procedures 2.2 Install consumer electronic products and
Service information systems in accordance with manufacturers
- Job report sheets instructions, requirements, and without
damage to the surrounding place or
environment
2.3 Test devices in accordance with standard
procedures
2.4 Undertake final inspections to ensure that
the installed device conforms to technical
requirements
2.5 Respond to unplanned events or conditions
in accordance with established procedures
2.6 Clean/clear work site of all debris and left
safe in accordance with the company
requirements
2.7 Prepare report on installation and testing of
equipment according to companys
procedures/policies
Pretesting procedure LO 3. Diagnose faults and defects of TLE_IAEPAS9-
- Visual inspection consumer electronic products and systems 12SCEP-AVP-
- Interview of customer 3.1 Observe systematic pretesting procedure in Ib-d-59
- Operate the unit accordance with manufacturers instructions
Systems defects/fault 3.2 Identify system defects/fault symptoms using
symptoms appropriate tools and equipment and
Troubleshooting techniques troubleshooting techniques in accordance
- Sensory method with safety procedures
Visual 3.3 Use test instruments required for the job in
Listening to telltale accordance with user manuals
sound 3.4 Isolate circuits using specified testing
Look out for unusual procedures
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 42 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
smell 3.5 Explain identified defects and faults to the
Touching or feeling responsible person in accordance with
- Component substitution enterprise or company policy and procedures
- Signal injection and 3.6 Check control settings/adjustments in
tracing conformity with service-manual specifications
- Voltage and current 3.7 Document results of diagnosis and testing
measurements accurately and completely within the
- Resistance check specified time
- Waveform analysis 3.8 Advise/inform customers regarding the status
- Display analysis and serviceability of the unit according to
- Circuit analysis procedures
Responsible persons
- Manager
- Supervisor
Service information
- Customer index
- Service flowchart/ forms
PPE LO 4. Maintain/repair consumer electronic TLE_IAEPAS9-
- Head protection products 12SCEP-AVP-
- Hand protection 4.1 Use personal protective equipment in Ie-h-60
- Body protection accordance with OHS practices
- Lower-body protection 4.2 Follow electro-static discharge (ESD)
OHS protection procedure in accordance with
ESD protection procedure current industry standards
Disassembling procedure 4.3 Replace defective parts/components with
Troubleshooting Techniques identical or recommended appropriate
- Sensory method equivalent ratings
- Component substitution 4.4 Solder/mount repaired or replaced
- Voltage and current parts/components in accordance with the
measurement current industry standards.
- Resistance/ continuity 4.5 Perform control settings/adjustments in
measurement conformity with service-manual specifications
- Circuit analysis and 4.6 Undergo repair activity within the required
isolation techniques timeframe
Soldering techniques 4.7 Observe care and extreme precaution in
PPE/ OHS handling the unit/product as per procedures
5S 4.8 Perform cleaning of unit in accordance with
Environmental Safety standard procedures
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 43 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- WEEE 4.9 Dispose excess components and materials
- 3Rs based on WEEE directives and 3Rs waste
- RoHS management program
Reassembling procedure LO 5. Reassemble and test repaired TLE_IAEPAS9-
Testing procedure consumer electronic product 12SCEP-AVP-
Service Information 5.1 Reassemble repaired units according to Ih-j-61
- Service flow chart procedures
- Job report sheets 5.2 Subject reassembled units to final testing
Environmental Requirements and cleaning in conformity with
manufacturers specifications
5.3 Comply to service completion procedures and
documentations based on manual
5.4 Dispose of waste materials in accordance
with environmental requirements
LESSON 15: SERVICING INDUSTRIAL ELECTRONIC MODULES, PRODUCTS AND SYSTEMS - CONTROL BOARDS, MODULES, MOTOR CONTROLLERS AND
DRIVES (SIEM-CMMD)
[NOTE: Only the electronics portion of the products and/or systems is covered in this lesson (3)]
Industrial electronic products The learners demonstrate an The learners shall be able to LO 1. Prepare unit, tools, and workplace for TLE_IAEPAS9-
and systems understanding of concepts service industrial electronic installation/ servicing 12SIEM-CMMD-
Industrial electronic and underlying principles in modules, products, and systems 1.1 Conduct complete checkup of industrial IIa-b-62
components servicing industrial (control boards, modules, motor electronic components, products and systems
Industrial electronic product electronics modules, controllers and drives) based on and verify defects against customer
- Control boards and products, and systems based customers description and description
modules on customers description and standard procedures 1.2 Verify repair/maintenance history in line with
- Motor controllers and standard procedures the company procedures
drives 1.3 Acquire service manuals and service
Service information information required for repair/ maintenance
Service manuals as per standard procedure
Materials, tools/ instruments 1.4 Set/prepare workplace for repair job in line
and equipment in servicing with the company requirements
Tools 1.5 Prepare necessary tools, test instruments and
- Variable power supply personal protective equipment in line with job
- Step-down transformer requirements
- Soldering iron/gun
- Desoldering tools
- Screwdriver (assorted)
- Wrenches (assorted)

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 44 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Allen wrench/key
- Utility knife/stripper
- Pliers (assorted)
- High-grade magnifying
glass with lamp
- Flashlight
- Cleaning brush
- High-voltage probe
- Ball peen hammer
Instruments
- Signal generator - AF/RF
- Multitesters
(analog/digital)
- Test jig
- ESD-free work bench with
mirror
- Oscilloscope
Materials
- Soldering lead
- Hook-up wires
- Assorted industrial
electronic components
Identification
Proper use and care
PPE
Workplace requirements
Installation procedure of LO 2. Install industrial electronic TLE_IAEPAS9-
industrial electronic modules/products/ systems 12SIEM-CMMD-
modules/ products/system 2.1 Obtain materials necessary to complete the IIb-e-63
Testing procedure of devices work are obtained in accordance with job
for industrial electronic requirements
modules/ products/system 2.2 Install industrial electronic
Quality inspection procedure modules/products/systems in accordance
for installed industrial with manufacturers instructions,
electronic modules/ requirements, and without damage to the
products/system surrounding place or environment
5S 2.3 Test devices in accordance with standard
Service information procedures
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 45 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Job report sheets 2.4 Undertake final inspections to ensure that
- Job order the installed device conforms to technical
- Service flow chart requirements
2.5 Respond to unplanned events or conditions
in accordance with established procedures
2.6 Clean/clear work site of all debris and left
safe in accordance with the company
requirements
2.7 Prepare report on installation and testing of
equipment according to companys
procedures/policies
Pretesting procedure LO 3. Diagnose faults and defects of TLE_IAEPAS9-
- Visual inspection industrial electronic 12SIEM-CMMD-
- Interview of customer modules/products/systems IIe-h-64
- Operate the unit 3.1 Observe systematic pretesting procedure in
Systems defects/Fault accordance with manufacturers instructions
symptoms 3.2 Identify system defects/fault symptoms
Troubleshooting techniques using appropriate tools and equipment and
- Sensory method troubleshooting techniques in accordance
- Component substitution with safety procedures
- Voltage and current 3.3 Use test instruments required for the job in
measurement accordance with user manuals.
- Resistance/ continuity 3.4 Isolate circuits using specified testing
measurement procedures
- Circuit analysis and 3.5 Explain identified defects and faults to the
isolation techniques responsible person in accordance with
Proper handling of tools, enterprise or company policy and procedures
materials, and test 3.6 Check control settings/adjustments in
instruments conformity with service-manual specifications
Service information 3.7 Document results of diagnosis and testing
- Customer index accurately and completely within the
- Service flowchart/ forms specified time
3.8 Advise/inform customers regarding the status
and serviceability of the unit according to
procedures

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 46 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
ESD protection procedure LO 4. Maintain/repair industrial electronic TLE_IAEPAS9-
PPE/ OHS products 12SIEM-CMMD-
Disassembling procedures of 4.1 Use personal protective equipment in IIh-j-IIIa-c-65
industrial electronic modules, accordance with Occupational Health and
products, and systems Safety practices
Troubleshooting Techniques 4.2 Follow electro-static discharge (ESD)
Maintaining and repairing protection procedure in accordance with
process of industrial current industry standards
electronic modules/ 4.3 Replace defective parts/components with
products/system identical or recommended appropriate
Soldering techniques equivalent ratings
Proper handling of industrial 4.4 Solder/mount repaired or replaced
electronic modules/ parts/components in accordance with the
products/system current industry standards
Accomplish service forms 4.5 Perform control settings/adjustments in
5S conformity with service-manual specifications
Environmental safety 4.6 Undergo repair activity within the required
timeframe
4.7 Observe care and extreme precaution in
handling the unit/product as per procedures
4.8 Clean unit in accordance with standard
procedures
4.9 Dispose excess components and materials
based on WEEE directives and 3Rs waste
management program

Reassembling procedure of LO 5. Reassemble and test repaired TLE_IAEPAS9-


industrial electronic product industrial electronic products 12SIEM-CMMD-
Posttesting procedure of 5.1 Reassemble repaired units according to IIIc-e-66
industrial electronic product procedures
Service information 5.2 Subject reassembled units to final testing
- Service flow chart and cleaning in conformity with
- Job report sheets manufacturers specifications
PPE 5.3 Comply to service completion procedures and
Environmental requirements documentations based on manual
5.4 Dispose waste materials in accordance with
environmental requirements

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 47 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LESSON 16: SERVICING INDUSTRIAL ELECTRONIC MODULES, PRODUCTS AND SYSTEMS - SENSORS, INPUT DEVICES, ACTUATORS, OUTPUT DEVICES,
OPTO-ELECTRONICS EQUIPMENT AND DEVICES (SIEM-IOOE)
[NOTE: Only the electronics portion of the products and/or systems is covered in this lesson (4)]

Service information The learners demonstrate an The learners shall be able to must LO 1. Prepare unit, tools and workplace for TLE_IAEPAS9-
- Job report sheets understanding of concepts be able to service industrial installation/ servicing 12SIEM-IOOE-
- Job order and underlying principles in electronic modules, products and 1.1 Conduct complete checkup of industrial IIIf-g-67
- Customer index servicing industrial systems (sensors, input devices, electronic components, products, and systems
Industrial electronic product electronics modules, actuators, output devices, opto- and verify defects against customer
- Sensors and input devices products, and systems based electronics equipment and description
- Actuators and output on customers description devices) based on customers 1.2 Verify repair/maintenance history in line with
devices and standard procedures description and standard the company procedures
- Opto-electronics procedures 1.3 Acquire service manuals and service
equipment and devices information required for repair/ maintenance
Service manuals as per standard procedure
Materials, tools/ instruments 1.4 Set/prepare workplace for repair job in line
and equipment in servicing with the company requirements
Tools, materials, and test 1.5 Prepare necessary tools, test instruments, and
instruments for servicing PPE in line with job requirements
Tools
- Variable power supply
- Step-down transformer
- Soldering iron/gun
- Desoldering tools
- Screwdriver (assorted)
- Wrenches (assorted)
- Allen wrench/key
- Utility knife/stripper
- Pliers (assorted)
- High-grade magnifying
glass with lamp
- Flashlight
- Cleaning brush
- High-voltage probe
- Ball peen hammer
Instruments
- Signal generator - AF/RF

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 48 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
- Multi-testers
(analog/digital)
- Test jig
- ESD-free work bench with
mirror
- Oscilloscope
Materials
- Soldering lead
- Hook-up wires
- Assorted electronic
components
Proper use and care
PPE
Workplace requirements
Installation procedure of LO 2. Install industrial electronic TLE_IAEPAS9-
industrial electronic modules/products/ systems 12SIEM-IOOE-
modules/ products/system 2.1 Obtain materials necessary to complete the IIIh-j-IVa-68
Testing procedure of devices work are obtained in accordance with job
for industrial electronic requirements
modules/ products/system 2.2 Install industrial electronic
Quality inspection procedure modules/products/systems in accordance
for installed industrial with manufacturers instructions,
electronic modules/ requirements, and without damage to the
products/system surrounding place or environment
5S 2.3 Test devices in accordance with standard
Service information procedures
- Job report sheets 2.4 Undertake final inspections to ensure that
- Job order the installed device conforms to technical
- Service flow chart requirements
2.5 Respond to unplanned events or conditions
in accordance with established procedures
2.6 Clean/clear work site of all debris and left
safe in accordance with the company
requirements
2.7 Prepare report on installation and testing of
equipment according to companys
procedures/policies

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 49 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
Pretesting procedure LO 3. Diagnose faults and defects of TLE_IAEPAS9-
- Visual inspection industrial electronic 12SIEM-IOOE-
- Interview of customer modules/products/systems IVb-e-69
- Operate the unit 3.1 Observe systematic pre-testing procedure in
Systems defects/fault accordance with manufacturers instructions.
symptoms 3.2 Identify system defects/fault symptoms using
Troubleshooting Techniques appropriate tools and equipment and
- Sensory methods troubleshooting techniques in accordance
Visual checks with safety procedures
Listening for telltale 3.3 Use test instruments required for the job in
sounds accordance with user manuals
Look out for unusual 3.4 Isolate circuits using specified testing
smells procedures
Touching or feeling 3.5 Explain identified defects and faults to the
- Component substitution responsible person in accordance with
- Signal injection and tracing enterprise or company policy and procedures
- Voltage and current 3.6 Check control settings/adjustments in
measurement conformity with service-manual specifications
- Continuity/resistance 3.7 Document results of diagnosis and testing
testing accurately and completely within the
- Waveform analysis specified time
- Display analysis (for video 3.8 Advise/inform customers regarding the status
displays) and serviceability of the unit according to
- Circuit analysis procedures
Proper handling of tools,
materials, and test
instruments
Service information
- Job report sheets
- Job order
- Bill of materials
- Customer index
- Service flowchart
- Stock and inventory
record
- Requisition slips (for
acquisition of parts)
- Supplier index
K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 50 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
ESD protection procedure LO 4. Maintain/repair industrial electronic TLE_IAEPAS9-
PPE/ OHS products 12SIEM-IOOE-
Disassembling procedures of 4.1 Use PPE in accordance with OHS practices IVf-h-70
industrial electronic modules, 4.2 Follow electro-static discharge (ESD)
products, and systems protection procedure in accordance with
Maintaining and repairing current industry standards
process of industrial 4.3 Replace defective parts/components with
electronic modules/ identical or recommended appropriate
products/system equivalent ratings
Soldering techniques 4.4 Solder/mount repaired or replaced
Proper handling of industrial parts/components in accordance with the
electronic modules/ current industry standards
products/system 4.5 Perform control settings/adjustments in
Accomplish service forms conformity with service-manual specifications
5S 4.6 Undergo repair activity within the required
Environmental Safety timeframe
- WEEE directives 4.7 Observe care and extreme precaution in
- 3Rs handling the unit/product as per procedures
- RoHS 4.8 Clean unit in accordance with standard
procedures
4.9 Dispose of excess components and materials
based on WEEE directives and 3Rs waste
management program
Reassembling procedure of LO 5. Reassemble and test repaired TLE_IAEPAS9-
industrial electronic product industrial electronic products 12SIEM-IOOE-
Posttesting procedure of 5.1 Reassemble repaired units according to IVi-j-71
industrial electronic product procedures
Service information 5.2 Subject reassembled units to final testing
- Service flow chart and cleaning in conformity with
- Job report sheets manufacturers specifications
PPE 5.3 Comply to service completion procedures and
Environmental requirements documentations based on manual
5.4 Dispose of waste materials in accordance
with environmental requirements

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 51 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)

RESOURCES
METHODOLOGY ASSESSMENT METHOD
TOOLS EQUIPMENT MATERIALS

Pliers (assorted) Multimeters (analog/digital) Soldering wire Lecture Written exam


Screwdriver (assorted) Workshop table SMD soldering paste Discussion Practical exam
Desoldering tools High grade magnifying glass SMD soldering flux Demonstration Observation in workplace
Wrenches (assorted) with lamp Cleaning brush Viewing multimedia Demonstration
Utility knife/stripper Variable power supply Lacquer thinner/ alcohol Hands on practice Portfolio
Test jig Variable transformer Thermal paste Simulation
Wire stripper Hot-air soldering station Ferric Chloride Work immersion
Digital micrometer Oscilloscope, digital/ analog Pale or water bucket Project making/ laboratory
Antistatic strap Signal generator Stranded/ solid/ hook-up exercises
Bread boards Function generator wires Dual training
Electronically controlled Wire stranded #22 assorted Supervised-industry training
solddering station color (five colors) eLearning/ blended learning
PPE Solid wire #22 assorted color program
(five colors)
Recommended equipment Assorted electronic
(optional) components (active &
Table top reflow oven passive)
Lead-free soldering system Terminal lugs
ESD free work bench with Cotton gloves
mirror (back-to-back/one- Electrical tape
sided) Cable ties
Manuals/books
Learning elements and
activity sheets
Schematic diagrams

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 52 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)

GLOSSARY

1. Appliances - A fixed (for support only), hand-held (held in hand during normal use), portable (moved while in operation or easily moved
from one place to another while connected to the supply) or stationary (can be moved, but not easily) consuming device, other
than a lamp. It includes portable electric tools, motor driven pumps, vacuum cleaners, food preparation equipment, hair
dryers, refrigerators, washing machines, dish washers, paper shredders, water coolers, clothes dryers, pest exterminators,
electric motor driven industrial tools and equipment, sanitary disposal units, radial and tangential fans and blowers.
2. Audio/visual equipment - Includes televisions, radios, monitors, cameras, closed circuit television, mono and stereo sound systems, gaming machines,
electronic display panels, cassette recorders, video cassette recorders, CDROM players, tape recorders, sound and video
duplication equipment, digital versatile discs, digital audio tapes, professional and domestic speaker systems, and mixer desks
3. Component - That portion of a unit of equipment, which has been designed as a discrete unit and that can be identified as such
4. Electronic components - These are generally intended to be connected together, usually by being soldered to a printed circuit board (PCB), to
create an electronic circuit with a particular function (for example an amplifier, radio receiver, or oscillator);
components may be packaged singly, or in more complex groups as integrated circuits. Some common electronic
components are capacitors, inductors, resistors, diodes, transistors, etc. Components are often categorized as active
(e.g., transistors and thyristors) or passive (e.g., resistors and capacitors).
5. Electronic products - These are generally referred as electronic consumer products such as large and small household appliances, televisions,
audio/video machines including its accessories, digital receivers, phones, lightings, health care and, soon, cameras and video
surveillance equipment
6. Environment - The area surrounding the worksite that can be directly or indirectly affected by occurrences therein; includes the atmosphere,
soils, drains, underground water tables, and the ecosystem. Protection of the environment would require the proper disposal of
waste materials, restriction of burning off, the correct handling of toxic substances, the containment of chlorofluorocarbons
(CFCs) and the like.
7. Equipment - A component part of an installation used for a particular purpose
8. Established procedures - Formal arrangements of an organization, enterprise, or statutory authority of how work is to be done
9. Industrial electronics - The industry of making electronic products for industrial purposes
10. Modifications - To make changes to the physical parameters or operational function of a device, component, or piece of equipment or
apparatus
11. OHS policies and procedures - Arrangements of an organization or enterprise to meet their legal and ethical obligations of ensuring the workplace is safe and
without risk to health
12. Printed circuit boards (PCBs) - Used to mechanically support and electrically connect electronic components using conductive pathways, tracks, or signal
traces etched from copper sheets laminated onto a nonconductive substrate. It is also referred to as printed wiring board
(PWB) or etched wiring board. Printed circuit boards are used in virtually all but the simplest commercially produced
electronic devices.
13. Requirements - That to which equipment and procedures and their outcomes must conform and includes statutory obligations and regulations
and standards called up by legislation or regulations
Servicing - Undertaking routine inspection, repair and maintenance of circuits, systems or apparatus; maintaining, fault finding and repair
of equipment, plant, and machinery

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 53 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
14. Standards - Technical documents that set out specifications and other criteria for equipment, materials, and methods to ensure that they
consistently perform as intended
15. System - A group or combination of interrelated, interdependent, or interlocking elements forming a collective entity; includes circuits,
apparatus, equipment and the like
16. Termination - The act by which an electrical connection to an apparatus is established; specifically a prepared joint or connection between a
cable, cord, or conductor and a point in an electrical circuit such as a terminal or connection point. Such terminations include
soldering, crimping, clamping, wire wrapping, and insulation piercing/compression.
17. Testing devices - Devices and instruments used to ensure that safety requirements and operational functions are met, and to diagnose faults in
apparatus, circuits, or systems
18. Wiring systems - Permitted cables, enclosures, supports, and accessories for power, measurement, control or communications purposes

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 54 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)
CODE BOOK LEGEND
Sample: TLE_EPAS8AQS-Ia-b-1

LEGEND SAMPLE DOMAIN / COMPONENT CODE

Learning Area and Technology and Livelihood TLE_ Common Competencies


Strand Education_Industrial Arts IA Applying Quality Standards AQS
First Entry Subject or Electronic Products Assembly and Performing Computer Operations PCO
EPAS
Specialization Servicing Performing Mensuration and Calculation PMC
Grade Level 9/10/11/12 9-12 Preparing and Interpreting Technical Drawings PITD
Domain/ Content/ Using and Maintaining Hand Tools UMHT
Uppercase Letter/s Applying Quality Standards AQS
Component/ Topic Terminating and Connecting Electrical Wiring and
TCEC
- Electronic Circuits
Roman Numeral Testing Electronic Components TEC
*Zero if no specific Quarter First Quarter I Core Competencies
Quarter Assembling Electronic Products AEP
Lower case letter/s Servicing Consumer Electronic Products and Systems SCEP-
*put an en dash Domestic Electronic Appliances with Electric Motor DEAEM
() between letters Week Week one a Servicing Consumer Electronic Products and Systems SCEP-
to indicate more Domestic Electronic Appliances with Heating Component DEAHC
than a specific week Servicing Consumer Electronic Products and Systems SCEP-
Domestic Electronic Appliances - Rechargeable and DEARE
-
Electronic-Controlled Lighting Units
Servicing Consumer Electronic Products and Systems SCEP-
Learning Assess quality of received materials
Arabic Number 1 Domestic Electronic Appliances Security and Solar Power DEASS
Competency or components
Management System
Servicing Consumer Electronic Products and Systems SCEP-
Technology-Livelihood Education and Technical-Vocational Track specializations may be taken Audio Products and Systems APS
between Grades 9 to 12. Servicing Consumer Electronic Products and Systems SCEP-
Schools may offer specializations from the four strands as long as the minimum number of Audio-Video Products and Systems AVP
hours for each specialization is met. Servicing Industrial Electronic Modules, Products and SIEM-
Systems Control Boards, Modules, Motor Controllers and CMMD
Please refer to the sample Curriculum Map on the next page for the number of semesters per Drives
Industrial Arts specialization and those that have pre-requisites. Curriculum Maps may be Servicing Industrial Electronic Modules, Products and SIEM-
modified according to specializations offered by a school. Systems Sensors, Input Devices, Actuators, Output IOOE
Devices, Opto-Electronics Equipment and Devices

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 55 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)

* Please note that these subjects have pre-requisites mentioned in the CG.
+ CG updated based on new Training Regulations of TESDA. **This is just a sample. Schools make their own curriculum maps considering the specializations to be
Other specializations with no prerequisites may be taken up during these semesters. offered. Subjects may be taken up at any point during Grades 9-12.
Pre-requisites of the subjects to the right should be taken up during these semesters.

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 56 of 57
K to 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INDUSTRIAL ARTS ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II
(640 hours)

Reference:

Technical Education and Skills Development Authority-Qualification Standards Office. Training Regulations for Electronic Products Assembly and Servicing NC II. Taguig City,
Philippines: TESDA, 2013.

K to 12 Industrial Arts Electronic Products Assembly and Servicing (NC II) Curriculum Guide May 2016 *LO Learning Outcome Page 57 of 57

You might also like