You are on page 1of 1

WinLink 1000

Product Catalog

WL1000-IDU-2E1-AL

Product Description

The WL1000-IDU-2E1-AL interfaces with WinLink 1000 ODU units to provide high-
quality network connectivity, power to the outdoor unit and real-time indications of
ODU status. In addition, the WL1000-IDU-2E1-AL supports up to 8 alarms for remote
monitoring.

Product Specifications

E1 Interface
Framing Unframed (transparent)
Number of E1 interfaces 2
Standards Compliance ITU-T G.703, G.826
Timing Independent Tx and Rx timing
Line Code HD83 @ 2.048 Mbps
Latency 3 msec (typical at 20 MHz Channel Bandwidth)
Impedance 120, balanced
Connector RJ-45
Jitter & Wander According to ITU-T G.823, G.824
LAN Interface
Type 10/100BaseT Interface with Auto-negotiation (IEEE 802.3)
Number of Ethernet Ports 2
Framing/Coding IEEE 802.3/U
Line Impedance 100
VLAN Support Transparent
Connector RJ-45
Maximum Frame Size 1536 Bytes
Latency 3 msec (typical at 20 MHz Channel Bandwidth)
Management
Protocol SNMP based
Network Management SNMPc based
Dry Contact Alarms 4 Inputs + 4 Outputs (D-25 Type Connector); Configurable by the
Management application
Mechanics
Dimensions 17cm(L) x 22cm(W) x 4.4cm(H)
Weight 0.5 kg/1.1 lbs
Power and Mounting
Power Feeding 100-240 VAC; -20 to 60 VDC
Power Consumption 3W
Environmental
Operating Temperatures -5C - 45C / 23F - 113F
Humidity 90% non-condensing
Safety
UL 60950 (Third Edition)
EN 60950-1 (2001), IEC 60950-1 (2001)
CAN/CSA C22.2 No. 60950
EMC
FCC CFR47 Class B, Part15, Subpart B
EN 300 386 V1.3.2; 301 489-4 V1.3.1; 301 489-1 V1.4.1;
55022:1998; 61000-3-2:2000; 61000-3-3:1995; 55024:1998
CAN/CSA-CEI/IEC CISPR 22-02
AS/NZS CISPR 22, CISPR 22:2002, CISPR 22:1997

WL1000-IDU-2E1-AL January 2007


AT0056470

You might also like