Professional Documents
Culture Documents
Students Score 5 4 3 2 1
Completes required work, Completes required Completes required Partially Incomplete work
Initiative identifies and pursues work, but requires work as requested. completed work
opportunities to expand minimum supervision to as requested
knowledge, skills, and pursues opportunities to
abilities. expand knowledge,
skills, and abilities
Very independent and Independent and Independent in Fairly Too dependent on
Independence pursues substantial, pursues substantial, pursuing knowledge independent in others
additional knowledge additional knowledge pursuing
knowledge
Always reviews prior Moderately review Occasionally review Minimum review No review of
learning (past experiences prior learning ( past prior learning ( past prior learning prior learning
Reflection inside and outside of the experiences inside and experiences inside and
work environment) and outside of the work outside of the work
indicating broader environment) environment)
perspective.
Score: / 20
Comments:
Contents :
15/1/2017 (Sunday)
Get file > Scan through specific column and row > Identify row that has OOS word > Copy and
paste the row in order
To came out with this coding, the principle of LOOP and How To Get Data From Other
Workbook should be understand well.
LOOP
A loop statement allows us to execute a statement or group of statements multiple times.
Following is the general form of a loop statement in VBA
DETAIL REPORT WEEK NO: 1
Contents :
DETAIL REPORT WEEK NO: 1
CNY
29/1/2017 CNY
30/1/2017 Extract data from FLM Submission from each field into Masterlist
31/1/2017 Acoustic Emission test on MOV at Onshore Sludge Catcher
1/2/2017 Upload FLM photo into PMOnet
2/2/2017
Students Score 5 4 3 2 1
Completes required work, Completes required Completes required Partially Incomplete work
Initiative identifies and pursues work, but requires work as requested. completed work
opportunities to expand minimum supervision to as requested
knowledge, skills, and pursues opportunities to
abilities. expand knowledge,
skills, and abilities
Very independent and Independent and Independent in Fairly Too dependent on
Independence pursues substantial, pursues substantial, pursuing knowledge independent in others
additional knowledge additional knowledge pursuing
knowledge
Always reviews prior Moderately review Occasionally review Minimum review No review of
learning (past experiences prior learning ( past prior learning ( past prior learning prior learning
Reflection inside and outside of the experiences inside and experiences inside and
work environment) and outside of the work outside of the work
indicating broader environment) environment)
perspective.
Score: / 20
Comments:
Extract data from FLM Submission from each field into Masterlist
Contents :
31/1/17 (Tuesday)
1. Extract data from FLM Submission from each field into Masterlist
Through PETRONAS Sharing Folder, data on FLM can be synchronized between FLM
Secretariat
Every end of the month, each focal from each field will submit the task been done through
FLM initiative
FLM Secretariat will be responsible to compile all those activities, screening through FLM
Task List , Identify MOS , Calculate FLM Cost Saving and Upload FLM photo into PMOnet
As one of FLM Sectarian, Im responsible to compile all the task and upload all the FLM
photo from every location into FLM Website
1/2/2017 (Wednesday)
The Acoustic Emission waveform has several parameters that can be used for
characterization of the source defect or discontinuity.
On that day, the CBM teams were asked to carry out AE on MOV (Motorized Valve)
102,103,202,205 and additional 304,305. Before start any work in terminal-area,
Production Superintendence and Technical Superintendence should sign completed PTW.
Our work delayed due to certain problem on PTW. At 11.00 am we start bring the AE
equipment into the terminal area. We assisted by several PETRONAS Technician under
production team. Each and every action that involves the plant process needs to be tally
with the operation team task force at Centralized Control Room.
To test the pass rate of a valve, the valve should be 100% completely close. The pressure
difference between one to another side of the valve should be at least 1 Bar. Pressure
difference on both side will force the gas/liquid particle in the pipeline to struck on the
vertical wall of the closed valve. If there any leakage the other end (low pressure region)
should increase by time. The small leakage might present but it cant be detected by our
sixth sense. The AE equipment detects the high frequency of the sound created by the
pressure difference in db. From that data , using specific engineering equation the mass
flow rate (rate valve passing) can be calculated. We managed to do AE on 4 out of 6
valves at the end of the days. They decide to continue the work by tomorrow morning.
DETAIL REPORT WEEK NO: 3
Location
Date execution
Task
- Three Weibull parameters - beta (shape parameter), eta (life) and gamma (start
location).
- < 1 implies infant mortality. Electronic and mechanical components often have high
failure rates initially. Some components are purposely burnt in prior to use, while others
require careful commissioning after installation. The presence of infant mortality indicates
poor training, lack of procedures and poor quality control.
- = 1 implies random failures. These failures are independent of time where an old part is
as good as a new part. Maintenance overhauls are not appropriate for random failures.
Condition monitoring and inspection are strategies used to detect the onset of failure, and
reduce the consequences of failure. This zone is affected by random incidents and
accidents. It reflects poor operating procedures, poor risk management and poor
materials selection at design.
- 1< <4 implies early wear out. You would not expect this type of failure within the
design life. Failure mechanisms such as corrosion, erosion, low cycle fatigue and bearing
failures fall in this range. Maintenance often involves a periodic rework or life extension
task. The shape can be altered by better materials selection, by degradation management
and by good control of operating practices.
- > 4 are wear-out or end of life failures. They should not appear in the design life. Age
related failures include stress corrosion cracking, creep, high cycle fatigue, and erosion.
Appropriate maintenance is often renewal of the item with new
DETAIL REPORT WEEK NO: 4
8/2/17 (Wednesday)
OFFSHORE JDS
PLATFORM
RDS
Condensate to
HPL with x%
allowable rate Separate Solid -
Liquid
Separate liquid -
liquid
Separate liquid -
liquid
Sump 1 Sump 2
Failure
- Contradict to the
Function of function of the asset
the asset - Possible/assumptions Cause of failure
Notes:
There will be
primary and
secondary case
9/2/17 (Thursday)
- To construct Process Flow Diagram , I need to refer the process flow through PNID
diagram. From there I learn much on how to translate most of the data from PNID
LOG BOOK WEEK NO: 5-6
Students Score 5 4 3 2 1
Completes required work, Completes required Completes required Partially Incomplete work
Initiative identifies and pursues work, but requires work as requested. completed work
opportunities to expand minimum supervision to as requested
knowledge, skills, and pursues opportunities to
abilities. expand knowledge,
skills, and abilities
Very independent and Independent and Independent in Fairly Too dependent on
Independence pursues substantial, pursues substantial, pursuing knowledge independent in others
additional knowledge additional knowledge pursuing
knowledge
Always reviews prior Moderately review Occasionally review Minimum review No review of
learning (past experiences prior learning ( past prior learning ( past prior learning prior learning
Reflection inside and outside of the experiences inside and experiences inside and
work environment) and outside of the work outside of the work
indicating broader environment) environment)
perspective.
Score: / 20
Comments:
Contents :
12/2/17 (Sunday)
- Through separation process, product from the well were separated into condensate, water
and gas
- Separation process consist of two stage process where the feed we passing through 3
phase separator before going through 2 phase separator.
- Final separation of condensate is then pump through metering skid before completely
transfer into FSO.
- Gas from the 3-phase separation will be pass to Gas Compressor Module (GCM) and
Compressed Gas Capacity Enhancement (CGCE).
- GCM will accept high-pressure gas and CGCE accept high-pressure gas. Both systems
were design to operate at optimum temperature and pressure.
- Product from both systems will be used as gas lift and other will be pass to flare system.
- Water from the separation will undergo further treatment through Water Handling
System.
- Dulang platform also use water injection where the sea water where treated through
Water Injection Module (WIM) before projected into the well
- Waste heat energy from the turbine and other equipment were recycled back through TG
and WHRU system.
- Those heat energy also been used in hot oil circulation system
DETAIL REPORT WEEK NO: 5
13/2/17 (Monday)
1. Attached to Onshore Gas Terminal
- Under supervision Faris Shah (Operation Engineer), I learn on the Industrial Effluent
Treatment System
- Consists there stage which are : primary treatment , secondary treatment and tertiary
treatment . Additional solid handling system for sludge discharge from Sequential Batch
Reactor.
- Feeds enter primary treatment, passing through Homogenization process in EQ tank.
- Then pumped into PH adjustment Tank to control PH and produce mercury sulphide as
precipitate
- In Mercury coagulation tank, heavy metal (Mg 2+,Fe2+,Mn2+, Zn2+,) and Boron were remove
due to precipitation reaction.
- Then in Flocculation tank, Cationic type (polymer) added to agglomerate the microfloc to
bigger floc
- Next it passed to Dissolved Air Floatation Unit, a liquid-solid separation unit by introducing
fine dissolve air bubbles to float the particle to the liquid surface.
- Cyanide Reaction and Neutralization occur in Chemical tank
- Moving to next stage (Secondary Treatment) in Sequential Batch Reactor where biological
process takes place. Bacteria with sufficient nutrient to consume microorganism in the
activated sludge.
- Tertiary treatment is where excess suspended solids will be filtered through a sand filter
and excess COD and other soluble pollutants will be retained in the carbon filter , allowing
only clear and clean water to pass through the filters.
Contents :
14/2/17 (Tuesday)
1. Learn on the process in Sequential Batch Reactor (SBR)
- It a fill and draw system
Contents :
15/2/17 (Wednesday)
1. Optimization Sequential Batch Reactor
- The amount of feed for SBR varies for each cycle, but the amount of bacteria used
constant (1kg/cycle)
- Faris ask me to came out with a proper equation that relate on the amount of feed with
the amount of the bacteria used.
- Information gathered:
- Food/ micro ratio measure the proper number of the microorganism relatives to the food
available, which must be, maintained ay acceptable range.
F
85 MLVSS
Q= M
F
BOD MLVSS
M
- Certain variable were constant to make sure it achieve optimum process and reaction
Q = 30 m3
BOD = 0.3*COD
Aeration basin volume = 115 m3
=
1000
DETAIL REPORT WEEK NO: 5
Contents:
16/2/17 (Thursday)
Typical Jar Test apparatus, normally provided with a single speed control and indicator, and each
stirrer can be either disengaged or placed at different heights
DETAIL REPORT WEEK NO: 6
Farah/Aiman,
In order to be more effective in performing analysis and working with data extraction and
validation, it would be very useful to learn how to read and write VBA scripts in Excel. This is
a very valuable skill that will put you far ahead of your colleagues in terms of work
efficiency.
Your task for this week would be to teach yourselves this skill. Ive attached a tutorial PDF
for Excel VBA that will be your main reference. Complete chapters 1 to 7 for today.
Regards,
M Khairul Syahir A Hakim
Executive, Condition Based Monitoring
Reliability Management, Engineering
Technical Services Department
- Chapter 2 more emphasizes on the concept of variables , use of Option Explicit, Assigning
Values to the Variables, Arithmetic Operations
- Chapter 3 will expose on the Using Message box and Input box. The input box allows the
user to enter the data while the message box displays output to the user.
Contents :
20/2/17 (Monday)
- Assist him in his effort to came out with a proper excel template to calculate the
MTBF(Mean Time Before Failure) , MTTR(Mean Time To Repair) and availability of each
equipment
- In order to do that , he passes to me the list all equipment in Dulang Platform , from
there I need to extract each running hours for each equipment
- There will be 4 type of equipment status:
a) OOS (Out Of Service) - equipment under major criticality that has been
decommissioned from the flow of process
b) Standby - under monitoring, it been put under standby mode in order to be
maintain it performance
c) PPM (Maintenance) - under maintenance due to some problem occur or follow
maintenance plan
d) Running - Equipment in healthy mode and run normally
- All these info can be gather in DOR (Daily Operation Report)
- I need to contact the asset focal for Dulang platform to request the DOR for 1 years
period
- Challenges: 1 years time period has been selected. I need to go through all 365 DOR doc
in order to extract the complete data. Template of the DOR itself makes the task become
difficult. Only compressor and pump equipment been mentioned in the DOR and not the
tag ID of the equipment been not mentioned it specific location. The DOR file itself in
Microsoft Word . If its in Excel , the VBA macros features may come handy.
Contents :
21/2/17 (Tuesday)
- In addition to conditional operators, there are a few logical operators that offer added
power to the VBA programs.
- In chapter 5, looping be thought using two kinds of loops in VB, the For.......Next loop and
the Do...Loop
DETAIL REPORT WEEK NO: 6
Contents :
22/2/17 (Wednesday)
1.
DETAIL REPORT WEEK NO: 6
23/2/17 (Thursday)