Professional Documents
Culture Documents
Scaling Networks
Answers : Scaling Networks (Version 6.00) - ScaN EIGRP Practice Skills Assessment - PT
1. Do not use the browser Back button or close or reload any exam windows during the exam.
2. Do not close Packet Tracer when you are done. It will close automatically.
3. Click the Submit Assessment button in the browser window to submit your work.
Introduction
In this practice skills assessment, you will configure the Major City network with EIGRP routing and
enhanced switching. The network is configured with both IPv4 and IPv6 on all devices. This will allow
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 1 of 9
CCNA 1 Chapter 1 Exam Answers
you to implement routing in both EIGRP for IPv4 and EIGRP for IPv6. Your goal is to achieve full
connectivity between all LAN hosts and the remote Town Server in both IPv4 and IPv6. For a full list of
tasks, see below.
All IOS device configurations should be completed from a direct terminal connection to the
device console.
Router Primary-1:
Router Primary-2:
Router High_School:
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 2 of 9
CCNA 1 Chapter 1 Exam Answers
Router ID
Interface bandwidth
EIGRP for IPv4 passive interfaces
Switch Dist-1:
RPVST+ activation
RPVST primary root bridge priority
EtherChannel channel groups
Static trunking with native VLAN
DTP
VTP
Switch Acc-1:
RPVST+ activation
PortFast
BPDU Guard
EtherChannel channel groups
Static trunking with native VLAN
DTP
VTP
Switch Acc-2:
RPVST+ activation
RPVST secondary root bridge priority
EtherChannel channel groups
Static trunking with native VLAN
DTP
VTP
PC PC-A:
Default gateway
PC PC-M:
Default gateway
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 3 of 9
CCNA 1 Chapter 1 Exam Answers
Addressing Table
Use the following addresses to configure the network. Some addresses are
preconfigured on devices that you are not required to configure, and are provided
for reference purposes only.
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 4 of 9
CCNA 1 Chapter 1 Exam Answers
192.168.100.22/30
S0/0/1 2001:DB8:1B::2/64
FE80::3 link local
S0/1/0 2001:DB8:E::2/64
10.10.0.1/24
G0/0.10 2001:DB8:3:10::1/64
FE80::3 link local
10.15.0.1/24
G0/0.15 2001:DB8:3:15::1/64
FE80::3 link local
10.20.0.1/24
G0/0.20 2001:DB8:3:20::1/64
FE80::3 link local
Instructions
1. Configure IPv4 and IPv6 default static routes on the Ed_Dept router to the Town Cloud. Use the
outgoing interface value in your configuration.
2. Configure the Primary-2 router with an IPv4 default route to the Town Cloud using the outgoing
interface value.
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 5 of 9
CCNA 1 Chapter 1 Exam Answers
Important: Your EIGRP for IPv6 configuration can only be checked for this
assessment indirectly. After you have completed your configuration, in order to get
credit for EIGRP for IPv6 routing, you must do the following:
1. On host PC-B, go to the Desktop tab and open the Command Prompt.
2. Enter telnet 2001:DB8:E::1
3. If your EIGRP for IPv6 configuration is correct, you should be able to reach
the External router with the address above. Authenticate your Telnet session
with the password cisco.
4. Move to privileged EXEC mode using the password admin.
5. Activate the G0/0 interface of the router.
6. Exit the Telnet session.
In your score report, for EIGRP for IPv6 interface activation, you will see an item for
activation of the router External G0/0 interface. If you got this item correct, you have
correctly activated EIGRPv6 on the required routers.
1. Set the interface bandwidth for the two EIGRP interfaces on router Ed_Dept to match the
interface clock speed.
2. Set the interface bandwidth for the serial interfaces on routers Primary-1 and High_School to
match the bandwidth of the interfaces on router Ed_Dept.
3. Configure all LAN interfaces, both physical and virtual, so that EIGRP messages are not sent
into the LANs.
4. Configure Ed_Dept so that the static default route is automatically shared with
the other EIGRP routers.
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 6 of 9
CCNA 1 Chapter 1 Exam Answers
Requirements:
Port
Device Interfaces
Channel
Fa0/3
Dist-1
Fa0/4
1
Fa0/3
Acc-1
Fa0/4
Fa0/5
Dist-1
Fa0/6
2
Fa0/5
Acc-2
Fa0/6
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 7 of 9
CCNA 1 Chapter 1 Exam Answers
Fa0/1
Acc-1
Fa0/2
3
Fa0/1
Acc-2
Fa0/2
1. Configure EtherChannels with the LACP protocol using the information in the table.
2. Both sides of the channel should ask if the other side is willing to participate in the channel.
Step 2-2: Configure Trunking.
Configure trunking as follows:
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 8 of 9
CCNA 1 Chapter 1 Exam Answers
1. Configure all of the access ports that are assigned to VLANs with BPDU
Guard.
2. Configure the same ports with PortFast.
If EIGRP is configured properly, full adjacencies should be formed between all routers in the EIGRP
AS. The hosts on the LANs should be able to communicate with the hosts on all other LANs and the
Town Server using both IPv4 and IPv6.
CCNA 6 | CCNAv6 - Free CCNA Exam Answers 2017 - Study CCNA for free! Page 9 of 9