You are on page 1of 2

2. Technical SDecification of vacuum Annealing Furnace.

A. Description: This unit will be used for annealing roll of wound CRGO core steel strips

for Transformers, to release inner stress and decrease iron loss.


a. Technical Data;

SI No. Description Guaranteed Data

01 Supply Source AC 400V, 3 phase, 50Hz

02 Maximum load capacity max. 5 tons in many small roll

I
shape

03 Max. heating temperature 950OC

04 Working temperature 780-82ooc

05 Heating power To be specified

06 Temperature control method PLC

07 Temperature control precision 2OC


08 Temperature evenness inside 5C (in the later stage of

temperature keeping)

09 Furnace surface temperature rise 35C + ambient temperature

10 Cooling fan motor power To be specified

11 Ultimate vacuity I 20Pa

12 Working vacuity 400Pa

13 Vacuuning speed S30 min (from atmosphere to


vacuity 3 00~900Pa)

14 Vacuum leakage speed Less than 50Path

15 Cooling water consumption To be specified.

16 High purity Nitrogen Gas (For cooling) More than 99.999%

17 Inside effective size (L x W x H) To be specified

18 Overall dimension (L x W x ID To be specified

19 Total weight of the unit To be specified

Features : I
a. Boxtype.
b, Must have facilities for filling up with nitrogen gas.
c. Total time per charge should be more than 26 hrs.
diha::idal:eprovidedwitheasychargingandrfeargingtheabovewe]ght

coara^alt qul7sO page \o2 o \\g


Tender Document for Wound Core Machinery

-
e. Should be provided with ccmtrol panel.
Spare parts:
I. All kinds of spare parts should be provided for two years.

Documents:
I. Training on ruining and Maintenance
2. 03 sets Operating and Maintenance manual in English.
3. Single Line Diagram/Lay out plan.

dr

page 103 of ll9

You might also like