Professional Documents
Culture Documents
GPON Terminal
Quick Start
EchoLife HG8240&HG8245&HG8247 GPON Terminal
V100R002C00&C01
Quick Start
Issue 04
Date 2011-02-15
Website: http://www.huawei.com
Email: support@huawei.com
and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of
their respective holders.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
the statements, information, and recommendations in this document do not constitute a
warranty of any kind, express or implied.
Basic Requirements
Keep the device dry during storage, transportation, and running of the device.
Prevent the device from colliding with other objects during storage,
transportation, and running of the device.
Install the device in strict compliance with the vendor requirements.
Do not uninstall the device without permission. Contact the specified service
center when a fault occurs on the device.
No enterprise or personnel should modify the structure, and security and
performance design of the device without authorization.
Abide by the local laws and regulations and respect the legal rights of others
when using the device.
Environmental Requirements
1
Precautions
2
Introduction
The appearance of GPON terminals HG8240, HG8245 and HG8247 is as follows:
Product Name Appearance
HG8240
HG8245
HG8247
The HG8240, HG8245 and HG8247 have slightly differ in appearance, ports, LEDs,
and technical specifications. For details, see "Connecting Cables", "Description of
LEDs", and "Technical Specifications"
127(
The figures shown in this document may differ from the actual GPON Terminal, but the
difference does not affect the functions of the GPON Terminal.
3
Installing the GPON Terminal
Installation List
Unpack the product and check carefully the items listed in the following table. If the actual items
do not match the items listed in the table, please contact the vendor.
Installation Procedure
The GPON Terminal can be placed on a horizontal workbench or mounted onto a wall
horizontally. The methods for mounting the GPON Terminal onto a wall are the same. The
procedure is as follows:
Step 1 Mark positions of two holes for fixing the GPON Terminal. For the distance
between holes, see the following table.
Step 2 Select a proper drill bit according to the outer diameter of the mounting
screws. Use a hammer drill to drill at the marked positions on the wall.
Step 3 Use a screwdriver to fasten the mounting screws at the positions of the holes
on the wall.
Step 4 Mount the GPON Terminal onto the mounting screws.
Horizontal Installation
4
Connecting Cables
Cable Connections Between the HG8240 and Other Devices
2
6
7
1
3 5
BBU RESET
5
Connecting Cables
Cable Connections Between the HG8245 and Other Devices
2 3 7
1 8
4
6
9 10
5 2 3 7
1 8
4
6
9 10
127(
The optical connector connected to the optical port is SC/APC, and the type of the
optical connector connected to the optical port in the wall is determined according to
actual conditions.
Step 2 Use a coaxial cable to connect the CATV port to the TV set or STB.
Step 3 Use a network cable to connect the LAN port to the Ethernet port of the
PC or IP STB.
Step 4 Use a telephone cable to connect the TEL port to the telephone set or fax
machine.
Step 5 Use a power cable to connect the POWER port to the power adapter or
backup battery unit.
127(
The preceding figure considers connecting of the power adapter as an example. When
the backup battery is used, it is recommended that you use a power monitoring cable
to connect the BBU port to the monitoring port of the backup battery. In this way,
the function of monitoring the backup battery on the GPON terminal is available. For
details on how to use the backup battery, see the backup battery usage guide.
Step 6 Use a USB data cable to connect the USB port to the USB storage device.
Step 7 Press the ON/OFF power button.
Step 8 Press the WLAN switch to enable the Wi-Fi access function. By default, this
function is enabled.
Step 9 Press the WPS switch to enable the WPS encryption function.
127(
Before enabling the WPS encryption function of the GPON Terminal by pressing the
WPS switch, make sure that the function is configured on the system software
beforehand.
8
Logging In to the Web Page
Please log in to the Web page of the GPON terminal as follows:
Step 1 Configure the IP address of the PC to be in the same subnet as the LAN IP
address of the GPON Terminal. For example:
- IP address: 192.168.100.100
- Subnet mask: 255.255.255.0
127(
Default settings of the LAN IP address and subnet mask of the GPON Terminal:
- IP address: 192.168.100.1
- Subnet mask: 255.255.255.0
Step 2 Enter the LAN IP address of the GPON Terminal in the address bar of the
Internet Explorer (IE), and then press Enter to display the login dialog box.
Step 3 On the login window diglog box, enter the user name root and default
password admin, select Web page language, and then click Login and wait.
After the password passes the authentication, the Web page of the GPON
Terminal is displayed.
9
Description of LEDs
LEDs of the HG8240
10
Description of LEDs
LEDs of the HG8247
11
Description of LEDs
Read the following description of LEDs by referring to the preceding figures of LEDs.
127(
In the preceding table, if the LED status is marked "Blinking" but the frequency is not specified, it
indicates that the blinking frequency of the LED is determined by the data traffic transmitted.
12
Description of LEDs
PON and LOS are GPON LEDs. The status of PON and LOS reflects the connection
between GPON terminal and the optical line terminal (OLT). The following table
describes the status of the PON and LOS LEDs.
Table 2 LED status indications 2
Status
No. Description
PON LOS
1 Off Off The ONT is disabled by the OLT.
2 Fast blinking Off The ONT tries to create a connection
to the OLT.
(Twice per second)
3 On Off A connection is created between the
ONT and the OLT.
4 Off Slow blinking The receive optical power of the ONT
is lower than the receiver sensitivity.
(Once two seconds)
5 Fast blinking Fast blinking The OLT detects that the device is a
rogue ONT.
(Twice per second) (Twice per second)
127(
When the LEDs are in the states as described in No. 5, that is, the OLT detects that the device is
a rogue ONT, rectify the fault in time and replace the rogue ONT.
13
FAQs
The POWER LED is off.
Check whether the ON/OFF button on the rear panel is pressed.
Check whether the power adapter matches the GPON Terminal.
Check whether the power connection is correct.
The LOS LED is blinking.
When the LOS LED blinks slowly, check whether the pigtail fiber is connected
normally and whether the optical connector is contaminated.
When the LOS LED blinks quickly, check whether the GPON Terminal transmits
optical signals normally.
The PON LED is off.
Check whether the optical fiber is properly connected to the OPTICAL port.
The GPON Terminal fails to register with the OLT. Contact the service provider for
help.
The CATV LED is off.
Contact the service provider to confirm that you have subscribed to the CATV
function or received the CATV signal..
The LAN LED is off.
Check whether the network cable delivered with the device is used.
Check whether the network cable is connected properly.
Check whether the LED of the network adapter is on.
Check whether the network adapter works normally.
The TEL LED is off.
Check whether a voice user is configured and enabled.
The WPS LED is off.
Check whether the WPS service is started.
The WLAN LED is off.
Check whether the WLAN service is started.
The USB LED is off.
Check whether the connection of the USB device is correct.
The phone does not ring when it receives a call, but the
communication is normal when the phone is in the offhook state.
The ONT provides a maximum ringing current voltage of 60 V AC. Please check
that the ringing current voltage of the phone does not exceed 60 V AC; otherwise,
change another phone.
How to reset the GPON Terminal?
Press the RESET button by using a sharp-ended object and then release the
button. Press the button to reset the device; press and hold the button (longer than
10s) to restore the device to the default settings and reset the device. If the LED is
off and then on again, it indicates that the system is reset successfully.
14
Technical Specifications
Item HG8240 HG8245 HG8247
Dimensions 195 mm x 155 mm 195 mm x 174 mm 268 mm x 213 mm
(L x W x H) x 34 mm x 34 mm x 34 mm
Weight (including the
About 500 g About 550 g About 800 g
power adapter)
Power supply 11 - 14 V DC, 1 A 11 - 14 V DC, 2 A 11 - 14V DC, 2 A
Power 100 - 240 V AC 100 - 240 V AC 100 - 240 V AC
adapter input 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz
maximum
12 W 17 W 19.5 W
consumption
Working
0 - 40 oC 0 - 40 oC 0 - 40 oC
temperature
5 - 95 % (non- 5 - 95 % (non- 5 - 95 % (non-
Working humidity
condensing) condensing) condensing)
15
Warranty Card
Thank you for choosing Huawei Technologies Co., Ltd. a leading telecom
solution provider. To get better services, please read this warranty card carefully,
fill in the required information, and preserve this card in good condition.
User Information
Address/Postal Code:____________________________________________________________
Telephone Number:______________________________________________________________
Email:_________________________________________________________________________
Product Type:___________________________________________________________________
Purchase Date:_________________________________________________________________
Invoice Number:________________________________________________________________
Dealer's Name:_________________________________________________________________
Dealer's Address:________________________________________________________________
Dealer's Telephone:______________________________________________________________
In any case that is not covered by this limited warranty or should the warranty
expire, Huawei shall charge for the service(s) claimed for the products if the product
is still remediable. Huawei preserves the right for interpretation of this limited
warranty.
www.huawei.com