Professional Documents
Culture Documents
This topic describes the checks that need to be performed before you install the U2000 LCT.
Procedure
Step 1 Log in to the OS as an administrator.
Step 2 Check that a Windows OS and related patches have been installed.
Checking Hardware and Software Configurations.
NOTE:
As Windows XP Professional SP3 for example, to check whether a patch has been installed,
right-click My Computer and choose Properties from the shortcut menu. If Service Pack x is
displayed in the System area on the General tab page, the Service Pack x patch has been
installed.
Step 3 Check whether the U2000 has been installed.
NOTE:
The U2000 LCT and U2000 cannot be installed on the same OS. If so, the U2000 LCT fails to
be used properly.
1. Check whether the U2000 Client, U2000 System Monitor, U2000 Server, U2000 NMS
Maintenance Suite, and NE Software Management shortcut icons are displayed on the Windows
desktop.
2. Check whether the U2000 server installation path, for example, D:\oss, exists.
To check whether data in the SQL Server 2000 or MSDE 2000A is sorted in binary mode.
perform the following steps:
1. Choose Start > Run. In the Run dialog box, enter the cmd command and click OK to start the
CLI.
2. Run the following command: C:\> isql -Usa -Psa_password -Sdatabase_name 1>
sp_helpsort 2> go
NOTE:
If the command output contains binary sort, data in the database is sorted in binary mode.
Step 5 Check that the available space on either disk C or disk which LCT will be installed is
larger than 10 GB.
Step 6 Check that current language for non-Unicode programs is English (United States).
----End
Context
The name of all software installation directories can contain only letters, numbers, and
underscores. The installation fails if a name contains spaces, parentheses, or Chinese characters.
Do not change the system time during installation. Otherwise, the installation fails.
Ensure that the database is running if the database is already installed.
Ensure that the U2000 is not installed on the OS. For details, see Step 3.
Procedure
Step 1 Log in to Windows OS as the administrator.
Step 2 Run the install.bat file to start U2000 LCT installation, as follows:
NOTE:
When you run a .bat file on Windows 7, a user account control dialog box may be displayed. In
this case,click Yes to allow the program to make changes to the computer.
Step 4 Click I accept these terms and click Next. The Select Language dialog box will be
displayed.
Step 5 Select English and click Next. The Select Component dialog box will be displayed.
Step 6 Select relevant components and click Next. The Configure Server dialog box will be
displayed.
NOTE:
It is recommended that you select all components.
Step 7 Click Next. The Select Version Style dialog box will be displayed.
NOTE:
If the d:\oss path does not exist, a confirmation dialog box is displayed. Click Yes. The system
creates the d:\oss path automatically.
If the d:\oss path exists and contains files or directories, an error is displayed. In this case, clear
this directory manually first.
The installation path can contain only letters, numbers, and underscores.
Step 8 Select the style as required, such as Default Style. Then, click Next.
NOTE:
An example of the differences between the two styles: For default style, alarms come in the
following four levels in descending order of severity: Critical, Major, Minor andWarning.
For North America style, alarms come in the following five levels in descending order of
severity: Critical, Major, Minor, Not Alarmed and Not Reported.
Step 9 Select the timeslot mode as required, for example Sequential mode (ITU-T G.707).
Then, click Next. The Configure Database dialog box will be displayed.
NOTE:
The Sequential mode is the international standard mode and is recommended.
Step 10 Set database parameters and click Next.
If the OS is Windows 7 Professional 64-bit or Windows 7 Professional 32bit, the Microsoft
SQL Server 2008 database needs to be installed. For detailed settings of the NMS database user
and database server, see next table.
Step 12 Confirm installation information and click Next. An installation progress dialog box is
displayed.
Wait patiently.
NOTE:
By default, the U2000 LCT can automatically expand the database based on growth parameters
that are set during database creation. Ensure that the available disk space is greater than the
maximum size that the database can grow before installation. If the available disk space is
smaller than the maximum size that the database can grow, a message in red fonts indicating
insufficient available disk space is displayed.
During installation, do not leave the PC idle for a long time. Otherwise, the PC enters the
hibernation state and the installation fails.
Step 13 Click Finish.
----End