You are on page 1of 13

LINK BUDGET CALCULATOR

PhilEx Corp. (AMALAYER) DOWNLINK


TARGET LOAD 0.7
DATA 384
Maximum Tx Power (W) 40
Maximum Tx Power (dBm) 46.02059991
TRANSMITTER CHARACTERISTICS Antenna Gain (dBi) 17
(Note: Tx(downlink)=Node b;
Tx(uplink)=UE Cable Loss (dB) 3.48
Body Loss (dB) 0
EIRP (dBm) 66.50059991

Thermal Noise Density (dBm/Hz) -174


Receiver Noise Figure 5
Receiver Noise Density -169
Receiver Noise Power -103.156688
Interference Margin 3
Processing Gain 10
Interference Power -100.156688
Receiver Interference Margin 3
Total Effective Noise + Interference (dBm) -98.3923391
RECEIVER CHARACTERISTICS AND Required Eb/No (dB) 4
MARGIN (Note: Rx(downlink)=UE;
Rx(uplink)=Node B Receiver Sensitivity (dBm) -104.392339
Antenna Gain (dBi) 0
Cable Loss (dB) 0
Fast-Fading Margin (dB) 6
Maximum Path Loss 164.892939
Coverage Pobability (%) 95
Log-normal Fading Constant (dB) 7
Propagation Model Exponent 3.52
Log-normal Fading Margin (dB) 7.3
Soft handover Gain (dB), multicall 1
In Car Loss or Indorr Loss (dB) 0
Allowed Propagation Loss for Cell Range (dB) 158.592939

RANGE (Okumura-Hata Path Loss Model)


Carrier Frequency (MHz) 944
Nobe B Antenna Ht. (m) 30
Parameter A 46.3
Parameter B 33.9
UE Ht. (m) 2
a(Hm) Medium 1.303982076
a(Hm) Large 1.045446665
Cell Range (Medium) 8.736905047
Cell Range (Large) 8.590492094
UPLINK
0.5

0.125
20.9691001
0
0
2
22.9691001

-131.9
17
3.48
3
165.3891
95
7
3.52
7.3
4
0
162.0891
LEGENDS:

899
30 CONSTANT
46.3
33.9 CALCULATION (Auto)
2
1.2904062 INPUT
1.04544667
11.4984516
11.3157982
LINK BUDGET CALCULATOR
PhilEx Corp. (AMALAYER) DOWNLINK
TARGET LOAD 0.7
DATA 384
Maximum Tx Power (W) 40
Maximum Tx Power (dBm) 46.02059991
TRANSMITTER CHARACTERISTICS Antenna Gain (dBi) 17
(Note: Tx(downlink)=Node b;
Tx(uplink)=UE Cable Loss (dB) 3.48
Body Loss (dB) 0
EIRP (dBm) 66.50059991

Thermal Noise Density (dBm/Hz) -174


Receiver Noise Figure 5
Receiver Noise Density -169
Receiver Noise Power -103.156688
Interference Margin 3
Processing Gain 10
Interference Power -100.156688
Receiver Interference Margin 3
Total Effective Noise + Interference (dBm) -98.3923391
RECEIVER CHARACTERISTICS AND Required Eb/No (dB) 4
MARGIN (Note: Rx(downlink)=UE;
Rx(uplink)=Node B Receiver Sensitivity (dBm) -104.392339
Antenna Gain (dBi) 0
Cable Loss (dB) 0
Fast-Fading Margin (dB) 6
Maximum Path Loss 164.892939
Coverage Pobability (%) 95
Log-normal Fading Constant (dB) 7
Propagation Model Exponent 3.52
Log-normal Fading Margin (dB) 7.3
Soft handover Gain (dB), multicall 1
In Car Loss or Indorr Loss (dB) 0
Allowed Propagation Loss for Cell Range (dB) 158.592939

RANGE (Okumura-Hata Path Loss Model)


Carrier Frequency (MHz) 2155
Nobe B Antenna Ht. (m) 30
Parameter A 46.3
Parameter B 33.9
UE Ht. (m) 2
a(Hm) Medium 1.533406256
a(Hm) Large 1.045446665
Cell Range (Medium) 4.00754329
Cell Range (Large) 3.881731714
UPLINK
0.5

0.125
20.9691001
0
0
2
22.9691001

-131.9
17
3.48
3
165.3891
95
7
3.52
7.3
4
0
162.0891
LEGENDS:

1965
30 CONSTANT
46.3
33.9 CALCULATION (Auto)
2
1.50775204 INPUT
1.04544667
5.49515155
5.33157185
PHILIPPINES: ITU Region 3
For Node B Tx and Rx
Frequency Bands: 1900-1920 MHz
2010-2025 MHz

TX to RX freq. Separation: 3,84 Mcps TDD Option

Channel Arrangement:
Channel Spacing;

Channel Raster:

Channel Number; The carrier frequency is designated by the UTRA absolute radio fre
the UARFCN in the IMT2000 band is defined in the general case as
Nt = 5 * F 0.0 </= F </= 3276.6 MHz
where F is the carrier frequency in MHz.
Additional channels applicable to operation in the frequency band
defined via the following UARFCN definition:
Nt = 5 * (F 2150.1 MHz) 2572.5 MHz </= F</
The 10 additional UARFCN for operations in frequency band define
2112, 2137, 2162, 2187, 2212, 2237, 2262, 2287, 2312, 2337.

Minimum DL power: 30 dB
Transmit OFF power: less than -79 dB

For UE Tx and Rx
UL and DL Transmission
UL and DL Transmission

No TX-RX frequency separation is required as Time Division Duplex (TDD) is employed. Each TDMA frame consists

of 15 timeslots where each timeslot can be allocated to either transmit or receive.


3,84 Mcps TDD Option-

The nominal channel spacing is 5 MHz, but this can be adjusted to optimise performance in a particular deployment

scenario.
200kHz

In addition a number of additional centre frequencies are specified according to table 5.1, which means that the centre

frequencies for these channels are shifted 100 kHz relative to the general raster.

gnated by the UTRA absolute radio frequency channel number (UARFCN). The value of
band is defined in the general case as follows:
0.0 </= F </= 3276.6 MHz
ncy in MHz.
le to operation in the frequency band defined in sub-clause 5.2(d) for 3.84 Mcps are
RFCN definition:
2572.5 MHz </= F</= 2617.5 MHz
r operations in frequency band defined in sub-clause 5.2(d) for 3.84 Mcps are hence:
2, 2237, 2262, 2287, 2312, 2337.
Allowed Propagation Loss
Downlink Range
Uplink Range
CELL RANGE

Allowed Propagation Loss


Downlink Range
Uplink Range
CELL RANGE
175.0829529 157.0521
11.90562346
4.26393155
5.26393155

160.103239 160.5891
4.535893863
4.26393155
4.26393155

You might also like