You are on page 1of 2

DXX-1710-2690/1710-2690-65/65-18i/18

8i-M/M
Model: ADU451816v01

Electrical Properties
2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45 , -45
Electrical downtilt () 0 - 12 , continuously adjustable
0 6 12 0 6 12 0 6 12 0 6 12
Gain (dBi)
17.4 17.5 17.3 17.7 17.9 17.5 18.0 18.2 17.6 18.2 18.2 17.8
Side lobe suppression (Typ.) (dB) 0 6 12 0 6 12 0 6 12 0 6 12

-for first side lobe above main beam 18 17 16 18 17 16 18 17 16 18 17 16


-within 0 - 15 sector above horizon 15 16 16 16 17 16 18 16 16 16 17 16
Horizontal 3dB beam width () 66 64 62 60
Vertical 3dB beam width () 6.5 6.0 5.3 4.8
VSWR < 1.5
Isolation between ports (dB) 30
Front to back ratio, copolar (dB) Typ. 28
0 Typ. 20
Cross polar ratio (dB)
60 Typ. 10
Max. power per input (W) 250 (at 50 ambient temperature)
Intermodulation IM3 (dBc) -153 (2 x 43 dBm carrier)
Squint () Typ. 5.0
Tracking (dB) Typ. 3.0 (within 10dB HBW)
Impedance () 50
Grounding DC Ground

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1365 x 299 x 109
Packing dimensions (H x W x D) (mm) 1660 x 345 x 175
Antenna weight (kg) 12.6
Clamps weight (kg) 2.5 (2 units)
Antenna packing weight (kg) 20.4 (Included clamps)
Mast diameter supported (mm) 0 - 115
50
Radome material Fib
berglass
Radome colour Lig
ght grey
Operational temperature () 5 .. +65
-55
Frontal: 490 (at 150 km/h)
Wind load (N) Lateral: 100 (at 150 km/h)
Rear side: 565 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 4 x 7/16 DIN Female
Connector position B
Bottom

Accessories
Item Model Description Weigh
ht Units per antenna

Downtilt kit ASMDT0B01 Mechanical downtilt: 0 - 16 1.4 kg


g 1 (Separate packing)

1
DXX-1710-2690/1710-2690-65/65-18i/18
8i-M/M
Model: ADU451816v01

55 58

83 58
Unit: mm

1710 - 2690 1710 - 2690


X X

+45 +45
-45 -45

7/16 (F) 7/16 (F) 7/16 (F) 7/16 (F)

1710 - 2200 MHz 2200 - 2690 MHz

NOTE
Extraordinary operating conditions, such as heavy icing or
o storm wind, may result in the breakage of an antenna.
These facts must be considered during the site planning process.

The installation team must be properly qualified and also be familiar with the relevant national safety regulations.

Huawei Technologies Co., Ltd. Bantian, Longgang Dis


strict, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 2 Issue: 2013-09-17

You might also like