You are on page 1of 92

DP001/2-5 2011.

qxd:new A4 price prod (Q4) 18/04/2011 19:06 Page 1

DP001/2
DIMENSIONS/PRICE LIST
GPS
PE PIPE SYSTEMS
Innovation in polyethylene pipe systems for water, gas and other applications

May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:06 Page 2

GPS
PE PIPE SYSTEMS
Introduction Market Oriented Customer Focus
GPS PE Pipe Systems is a member of the GPS PE Pipe Systems products have a The key to our success lies in the
international Aliaxis Group of Companies broad range of applications in the commitment we pledge to provide the
who manufacture and sell pipe systems industrial and utilities markets on a highest quality service and support to
and related products for residential and worldwide basis. The utilities of water our customers and industry end-users.
commercial construction, industrial and and gas distribution are important We are a team of highly motivated and
public utilities. sectors for high integrity products experienced individuals who are
We specialise in the research, where the maintenance of water dedicated to helping our customers
development and manufacture of quality and the safe transport of achieve their goals.
polyethylene and multi-layer pipe gaseous fuels are of paramount We place the utmost importance in
systems including fittings for gas and importance. Industrial applications meeting the needs of our customers,
water transportation in the utilities, include: alternative energy installations constantly evolving our extensive
offshore and industrial markets. in landfill gas systems; effluent product portfolio to meet the ever
transportation and mineral slurries. changing demands of the water and gas
Resulting from the amalgamation of
two market leading companies, GPS PE Many of the brands in the GPS utilities, industrial and offshore markets.
Pipe Systems brings together over one portfolio have a long record of Quality
hundred years of experience and innovation in meeting the needs of the
Designed, manufactured and supplied
knowledge in plastic pipe systems water and gas utilities. One of the
under a BS EN ISO 9001:2008
foremost pioneers in polyethylene pipe
accredited Quality Management System,
The Environment systems, GPS is continually improving
GPS products comply with relevant
We actively and consistently strive to and updating its offering to meet the
national, European and international
reduce our impact on the environment. ever growing needs of the distribution
product standards to ensure peace of
We have measured our performance engineer, ensuring they stay at the
mind for our customers.
against various environmental indicators forefront of world gas and water
since 1997 and operated an environmental distribution/treatment systems.
management system accredited to ISO Manufactured in the UK, our products are
14001 since 1999. We are currently sold to more than 60 countries worldwide.
working towards an independent Certificate No. FM 34819 Certificate No. E 51385

verification of our carbon footprint under


the Certified Emissions Measurement
And Reduction Scheme (CEMARS).

World leaders in the design, manufacture, marketing and sales of high


performance, high integrity plastic and composite piping systems.
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:06 Page 1

GPS
PE PIPE SYSTEMS

Contents
Approvals / Materials 2 DuraFuse Fittings 35-46
Couplers 35-36
Operating Pressures 2
Excess Flow Limiters 36
Standards 3-4 Reducers 37
Excel (PE100) 5-11 Tapping Tees 38-39
Straight Lengths 5-9 Top Loading Branch Saddles 40
Coils 10 Under Clamp Branching Saddles 40
Excel3c and Geothermal Coils 11 Purge Saddles 41
Elbows 42
PE80 Pipe 12-15 Equal Tees 43
Straight Lengths 12-13 Flanged Branch Tees 43
Coils 14-15 End Caps 44
Secura-Line 16-19 Electrofusion Wipes 44
Straight Lengths 16 Duck Foot Bends 44
Fittings 17-19 Transition Couplers 45
SlimFlange Assemblies 17 Transition Elbows 45-46
Mitred Elbows 17-18 Frialen Fittings 47-51
Pupped Reducers 18 Couplers 47
Pupped Equal Tees 19 Reducers 47
Pupped Reduced Branch Tees 19 End Caps 48
Pupped End Caps 19 Top Loading Tees 48
Protecta-Line 20-33 Branch Saddles 48-49
Coils 20 Repair Saddles 49
Straight Lengths 21 Spigot Saddles 49
Mechanical Compression Fittings 22-24 Elbows 50
Couplers 22 Equal Tees 50
Equal Tees 23-24 Reinforcing Saddles 50
90 Elbows 23 Ball Valves 51
Connectors 23 Full Faced Flanges 51
90 Elbows PE x Female Iron 24 Frialoc - PE Shut Off Valves 51
Reducing Sets 24 Tapping Ball Valve 51
Stop Cocks 24 Long Spigot Fittings 52-67
Ductile Iron Ferrule 24 Reducers 52-53
Ferrule Off-Takes 25 Elbows 54-55
25mm and 32mm Ferrule Off-Takes 25 Equal Tees 56
63mm Ferrule Off-Takes 25 Stub Flanges 57
90 Gunmetal Elbows 25 Stub Flange Assemblies 58
Drill/Liner Heads 25 Stub Flange Adaptor Kits 59
Drill/Liner Head O-Ring Kit 25 Reduced Branch Tees 60-61
Fluid Compression Fittings 26-30 Flanged Branch Tees 62
Couplers and Reducers 26 All Flanged Equal Tees 63
Elbows 28 End Caps 63
Equal Tees 28 Formed Bends 64-67
Flanged Branch Tees 29
Repair Couplers 29 Pupped Fittings 68-83
Stub Flanges 30 Reducers 68-69
Duck Foot Bends 30 Elbows 70-71
Accessories 30 Equal Tees 72
Electrofusion Fittings 31-33 Large Diameter Equal Tee 73
Couplers 31 Large Diameter Reduced Branch Tee 74
Reducers 31 Reduced Branch Tees 75
Elbows 31-32 Stub Flange Assemblies 76
Equal Tees 32 Flanged Short Branch Tees 77
Flanged Tees 33 SlimFlange Assemblies 78
Flanged Adaptors 33 End Caps 79
Mitred Elbows 80-83
Push-Fast 34
Pipe 34 Accessories 84-88
Elbows 34 Galvanised Backing Rings for Water 84-86
Bends 34 Galvanised Backing Rings for Gas 87
Couplers 34 Gaskets 88
Tees 34
Sockets 34

1
website: www.gpsuk.com email: enquiries@gpsuk.com
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 2

GPS
PE PIPE SYSTEMS

Approvals Materials
The GPS range of polyethylene pipes, DuraFuse electrofusion fittings and GPS manufactures polyethylene systems in both PE80 and
long spigot fittings are approved for use in many countries. Examples of Excel (PE100). The numbers relate to the MRS (Minimum Required
where second/third party certification has been achieved are given below: Strength) values of the material.
PE80 This is the term used to denote the polyethylene material which
UK National Grid has been widely used for gas, water and industrial applications for many
BSI Kitemark years. The terms MDPE and HDPE were commonly used to describe this
Water Regulations Advisory Scheme (WRAS) material, although MDPE PE80, as historically supplied by GPS, has a
Approved by the Secretary of State much higher long term stress crack resistance than traditional HDPE
Argentina Argentinian Gas Institute PE80.
Austria VGW/N/FI/TGM
Australia WSAA PE100 This is a term used to denote high performance polyethylene,
SAI and PE100 pipes are sold by GPS under the brand name of Excel. PE100
Belgium Becetel is a higher performance material than PE80 and demonstrates exceptional
Eandis resistance to rapid crack propagation as well as to long-term stress
Czech Republic TSU cracking.
Denmark DS Moreover, the higher strength of PE100 permits thinner pipe walls than
France GDF PE80 for the same operating pressure. PE100 uses less polymer and
Germany DVGW provides for a larger bore and increased flow capacity for a given nominal
Greece DEPA pipe size. This can result in significant cost savings at certain sizes and
Hungary Hungarian Mining Office pressure ratings.
Italy IIP-UNI (PE100 (Excel)) PE80 and Excel (PE100) are not recommended for continuous pressure
AEM operation at temperatures above 60C for liquids, including sewerage and
Malaysia Sijil Barabgan Piawai Yang Terjadual industrial effluents, or 30C for gaseous fluids. Excel (PE100) has
Perbadanan Air Meluka advantages over PE80 at low temperatures, since it is extremely crack
Perakuan Keluluson Gregason Gas resistant down to -30C. When considering applications which exceed the
Perkakas Gas limits stated above, please contact our Technical Support Department for
Kelengapem Gas further information.
Moldova Centrul de Expertiza Technica
Poland IGNIG The current U.K. pressure ratings and preferred sizes for polyethylene
Romania Central Laboratory pipes are as shown below:
Russia Hygiene Approval
Spain Gas Natural
Sweden Tumab
Switzerland SVGW (PE100 (Excel), Push-Fast)
Ukraine UKSEPRO

Please contact our Technical Support Department for further information

MAXIMUM CONTINUOUS OPERATING PRESSURES AT 20C FOR STANDARD PE PIPES.


SDR17.6(GAS) /
PIPE OD SDR11 SDR13.6 SDR17 SDR21 SDR26
* PIPES SPECIFICALLY SIZED
SDR17 (WATER)
FOR INSERTION LINING PE80 Excel (PE100)

PE80 PE80 Excel (PE100)

Excel (PE100)

Excel (PE100)
APPLICATIONS
GAS WATER GAS WATER GAS GAS WATER WATER WATER WATER
20mm 5.5 12.5
25mm 5.5 12.5
32mm 5.5 12.5
50mm 5.5 12.5
63mm 5.5 12.5 7.0 16.0 4.0 3.0 8.0
75mm 4.0
90mm 5.5 12.5 7.0 16.0 3.0 8.0 10.0
110mm 12.5 16.0 3.0 8.0 10.0
125mm 5.1 12.5 7.0 16.0 3.0 8.0 10.0
160mm 5.1 12.5 16.0 3.0 8.0 10.0 8.0 6.0
180mm 4.1 12.5 7.0 16.0 3.0 8.0 10.0 8.0 6.0
213mm*
225mm 12.5 16.0 3.0 8.0 10.0 8.0 6.0
250mm 4.0 12.5 7.0 16.0 3.0 8.0 10.0 8.0 6.0
268mm*
280mm 12.5 16.0 3.0 8.0 10.0 8.0 6.0
315mm 3.4 12.5 7.0 16.0 2.7 8.0 10.0 8.0 6.0
355mm 3.1 12.5 7.0 16.0 2.5 8.0 10.0 8.0 6.0
400mm 12.5 7.0 16.0 2.3 8.0 10.0 8.0 6.0
450mm 12.5 7.0 16.0 2.2 8.0 10.0 8.0 6.0
469mm*
500mm 12.5 7.0 16.0 2.1 8.0 10.0 8.0 6.0
560mm 7.0 16.0 2.0 10.0 8.0 6.0
630mm 7.0 16.0 1.8 10.0 8.0 6.0
710mm 16.0 10.0 8.0 6.0
800mm - 1200mm 10.0 8.0 6.0

- GPS CAN USUALLY OFFER SDRs OTHER THAN THOSE SHOWN IN THE TABLE, E.G. FOR CLOSE FIT LINING APPLICATIONS
- UK GAS OPERATING PRESSURES HAVE HISTORICALLY BEEN LIMITED TO 7 BAR FOR PE100 PIPE - THIS IS THE RESULT OF THE UK RATING SYSTEM FOR CHARGES ON PIPELINES AT HIGHER PRESSURE
- IN LINE WITH UK WATER INDUSTRY RECOMMENDATIONS, GPS DE-RATE MITRED BENDS BY 0.8 X THE RATING OF THE PIPE FROM WHICH IT WAS MADE - PLEASE CONTACT OUR TECHNICAL SUPPORT DEPARTMENT FOR
FURTHER INFORMATION
- PE80 (MDPE) WATER PIPELINES 355MM AND GREATER IN DIAMETER SHOULD BE DERATED IF SIGNIFICANT AMOUNTS OF AIR ARE PRESENT - SEE THE UK WATER INDUSTRY'S IGN 4-32-18 MARCH 2003
- PE80 (MDPE) GAS PIPE PRESSURES MUST BE FURTHER DERATED FOR TEMPERATURES BELOW 0C.
- THE VALUES IN THE ABOVE TABLE DO NOT ADDRESS ANY OTHER SAFETY-RELATED ISSUES ASSOCIATED WITH PIPELINE DESIGN.

2
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 3

GPS
PE PIPE SYSTEMS
GPS polyethylene range is designed to comply with the requirements of one or more of the standards shown on this page.

General Standards
Standard Title Applicable to GPS Products
ISO 161-1:1996 Thermoplastic pipes - nominal outside diameters and nominal pressures All pipes and fittings
ISO 4065:1996 Thermoplastic pipes - universal wall thickness tables All pipes
BS ISO 11922-1:1997 Thermoplastic pipes for the conveyance of fluids dimensions and tolerances metric series All pipes
BS EN 1092-1:2007 Flanges and their joints - circular flanges for pipes, valves, fittings and accessories, PN designated All flange backing ring drillings, PN16 and PN10

Water Standards
Standard/Approval Title Applicable to GPS Products
Regulation 31(England & The Water Supply (Water Quality) Regulations 2000 All pipes
Wales), Regulation 27
(Scotland), Regulation 30 (NI)
The (Water) Regulators The (Water) Regulators Specification & The Water Supply (Water Fittings) Regulations 1999 All pipe materials. All fitting materials. All PE100
Specification & The Water fittings and matching pipes. All Protecta-Line
Supply (Water Fittings) fittings and matching Protecta-Line pipes
Regulations 1999
BS 6920 Part 1:2000 Suitability of non-metallic products for use in contact with water intended for human All pipe materials. All fitting materials. All PE100
consumption with regard to their effect on water - Part 1: Specification fittings and matching pipes. All Protecta-Line
fittings and matching Protecta-Line pipes
BS 6920 Part 2:2008 Suitability of non-metallic products for use in contact with water intended for human All pipe materials. All fitting materials. All PE100
consumption with regard to their effect on water - Part 2: Methods of test fittings and matching pipes. All Protecta-Line
fittings and matching Protecta-Line pipes
ISO 4427:2007 PE pipes for water supply Blue and black PE80 and PE100 pipes and
fittings
BS EN 15494:2003 Specifications for polyethylene components and systems Blue and black PE80 and PE100 pipes and
fittings up to 1600 mm
BS EN 12201:2003 Plastic piping systems for water supply polyethylene Blue and black PE80 and PE100 pipes and
fittings in sizes up to 1600 mm
BS EN 805:2000 Water supply requirements for systems and components outside buildings External water supply installations
BS EN 681-2:2000 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage Seals and flange gaskets
applications. Thermoplastic elastomers.
BS 5306:1990 - Part 2 Fire extinguishing installations and equipment on premises Blue and black PE80 and PE100 for external
buried fire mains
BS 6572:1985 Specification for blue polyethylene pipes up to nominal size 63mm for below ground use for Blue PE80 pipes up to and including 63 mm
potable water
WIS 4-08-02:1994 Specification for bedding and sidefill materials for buried pipelines Backfill materials specification
WIS 4-22-02 Specification for ferrules and ferrule straps for underground use Protecta-Line ferrules
WIS 4-24-01:1998 Specification for mechanical fittings and joints including flanges for polyethylene pipes for the Stub flanges, Slimflange and fluid compression
conveyance of cold potable water for the size range 90 to 1000 including those made of metal fittings in sizes 90 to 1000 mm
or plastics or a combination of both
WIS 4-32-08:2002 Specification for the fusion jointing of polyethylene pressure pipeline systems using PE80 and Butt fusion and electrofusion jointing of blue and
PE100 materials black PE80 and PE100 pipes and fittings
WIS 4-32-16:1998 Specification for butt fusion jointing machines Automatic, semi automatic and manual butt
fusion machines
WIS 4-32-17:2001- Issue 2 Polyethylene pressure pipes for pressurised water supply and sewerage duties Blue and black PE80 and PE100 pipes including
Securaline in sizes up to and including 1600 mm
WIS 4-32-19:2007 Polyethylene pressure pipe systems with an aluminium barrier layer for potable water supply in 25mm to 630mm Protecta-Line pipe
contaminated land sizes and fittings
IGN 4-08-01:1994 Bedding and sidefill materials for buried pipelines Backfill materials selection
IGN 4-32-18:2003 The choice of pressure ratings for polyethylene pipe systems for water supply Blue and black PE80 and PE100 pipe systems
and sewerage duties
IGN 4-37-02:1999 Design against surge and fatigue conditions for thermoplastic pipes blue and black PE80 and PE100 pipe systems
IGN 9-04-03:2002 The selection of materials for water supply pipes in contaminated land Protecta-Line pipes and fittings
DIN 8074:1999 Pipes of high density polyethylene (HDPE) type 2 dimensions Black PE80 and PE100 pipes in
sizes up to and including 1600 mm
DIN 8075:1999 Pipes of high density polyethylene (HDPE) type 2 testing Black PE80 and PE100 pipes in
sizes up to and including 1600 mm
DIN 16963:1980 Part 1 High density polyethylene (HDPE) fittings dimensions, type 2 Black PE80 and PE100 spigot and electrofusion
fittings up to and including 1200 mm

3
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 4

GPS
PE PIPE SYSTEMS

Gas Standards
Standard Title Applicable to GPS Products
ISO 4437:2007 Buried pipes for the supply of gaseous fuels All yellow and black pipes and electrofusion and
spigot fittings
BS ISO 8085-1 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels All yellow and black electrofusion fittings up to
and including 630 mm
BS ISO 8085-2 Spigot fittings for butt fusion or socket fusion using heated tools and for the use with All yellow and black spigot fittings up to
electrofusion fittings and including 630 mm
BS ISO 8085-3 Electrofusion fittings All yellow and black electrofusion fittings up to
and including 630 mm
BS EN 682:2002 Elastomeric seals materials for seals used in pipes and fittings carrying gas and Seals and flange gaskets
hydrocarbon fluids
BS EN 1555:2002 Plastic piping systems for supply of gaseous fuels All yellow PE80 and black PE100 pipes and
fittings up to and including 630mm
BS EN 12007-1:2000 Gas supply systems pipelines for maximum operating pressure up to and including 16 bar Pipeline recommendations
BS 2494G Specification for elastomeric materials used in the manufacture of seals for gas mains and Seals and flange gaskets
fittings up to 7 bar (BS EN 682)
GIS/PL2:2006 Specification for polyethylene pipe and fittings for natural gas and suitable manufactured gas. Yellow PE80 and Secura-Line pipes
up to 630 mm
Part 1 General and polyethylene compounds for use in polyethylene pipe and fittings Raw materials
Part 2 Pipes for use at pressures up to 5.5 bar Yellow PE80 and Secura-Line pipes
up to 630 mm
Part 4 Fusion fittings with integral heating elements Yellow PE80 and orange PE100 and
black PE100 electrofusion fittings
Part 6 Spigot end fittings for electrofusion and/or butt fusion purposes Yellow PE80 and orange PE100 and
black PE100 spigot fittings
Part 8 Pipes for use at pressures up to 7 bar Orange PE100 pipes up to 500 mm
GIS/PL3:2006 Specification for self anchoring mechanical fittings/joints for polyethylene(PE) pipe for natural Stub flanges and Slimflange
gas and suitable manufactured gas
GIS ECE1 Specification for electrofusion control units Electrofusion control boxes
GIS/EFV1:2000 Specification for flow limiters for PE services operating at pressures above 75 mbar and Excess flow limiters electrofusion
not exceeding 6m3/hr couplers and reducers
GIS/F2 Mains sealing plugs and service connection fittings for use at pressures not greater than 2 bar Purge Saddles

Product Codes
GPS product codes are generated by three elements - range code (determines material and
colour), shape code (determines product type) and size code which are set out in red in our
product pricing tables.

For example:
Range code Shape code Size code

40 100 311 = 40 100 311

Meaning PE100 Black Electrofusion Coupler 63mm

Minimum Order Values


GPS accept orders based on a minimum order value which varies across our product ranges.
Please contact the sales office for further information.

Returns Policy
GPS operate a policy where no products shall be returned without written permission from GPS.
Where any such written permission is granted a restocking charge may be applied.

4
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 5

EXCEL (PE100) PIPE


FOR PRESSURISED WATER SUPPLY AND SEWAGE DUTIES

Straight Lengths - SDR11

Size Black Black Blue Blue


Per Metre
(mm) 6M Code 12M Code 6M Code 12M Code

90 40 512 313 40 527 313 41 512 313 41 527 313 21.10


110 40 512 314 40 527 314 41 512 314 41 527 314 32.65
125 40 512 315 40 527 315 41 512 315 41 527 315 42.53
160 40 512 317 40 527 317 41 512 317 41 527 317 69.95
180 40 512 318 40 527 318 41 512 318 41 527 318 87.12
200 40 512 319 40 527 319 41 512 319 41 527 319 97.57
225 40 512 320 40 527 320 41 512 320 41 527 320 131.72
250 40 512 321 40 527 321 41 512 321 41 527 321 161.87
280 40 512 322 40 527 322 41 512 322 41 527 322 208.38
315 40 512 323 40 527 323 41 512 323 41 527 323 256.89
355 40 512 324 40 527 324 41 512 324 41 527 324 326.28
t 400 40 512 325 40 527 325 41 512 325 41 527 325 427.47
450 40 512 326 40 527 326 41 512 326 41 527 326 542.28
OD 500 40 512 327 40 527 327 41 512 327 41 527 327 668.72
560 40 512 328 40 527 328 41 512 328 41 527 328 836.22
630 40 512 329 40 527 329 41 512 329 41 527 329 1,058.58
710 40 512 330 40 527 330 41 512 330 41 527 330 1,346.88

Straight lengths up to 18m may be available to order - please contact our Sales Office for further information

Size Max OD Mean Bore Min t Max t Mean Weight


(mm) (mm) (mm) (mm) (mm) (kg/m)

90 90.6 73.0 8.2 9.2 2.1


110 110.7 89.0 10.0 11.1 3.1
125 125.8 101.0 11.4 12.7 4.0
160 161.0 130.0 14.6 16.2 6.6
180 181.1 146.0 16.4 18.2 8.3
200 201.2 162.0 18.2 20.2 10.3
225 226.4 183.0 20.5 22.7 13.0
250 251.5 203.0 22.7 25.1 16.0
280 281.7 227.0 25.4 28.1 20.0
315 316.9 256.0 28.6 31.6 25.4
355 357.2 288.0 32.2 35.6 32.3
400 402.4 325.0 36.3 40.1 41.0
450 452.7 365.0 40.9 45.1 51.9
500 503.0 406.0 45.4 50.1 64.0
560 563.4 455.0 50.8 56.0 80.2
630 633.8 512.0 57.2 63.1 101.6
710 716.4 578.0 64.5 71.2 129.3

GPS pipes, manufactured to BS EN 12201-2 standard, are capable of withstanding transient


surge pressures of up to twice the rated pressure of the pipe.

5
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 6

EXCEL (PE100) PIPE


FOR PRESSURISED WATER SUPPLY AND SEWAGE DUTIES

Straight Lengths - SDR17

Size Black Black Blue Blue


Per Metre
(mm) 6M Code 12M Code 6M Code 12M Code

90 40 506 313 40 507 313 41 506 313 41 507 313 14.20


110 40 506 314 40 507 314 41 506 314 41 507 314 21.28
125 40 506 315 40 507 315 41 506 315 41 507 315 27.62
160 40 506 317 40 507 317 41 506 317 41 507 317 44.58
180 40 506 318 40 507 318 41 506 318 41 507 318 56.42
200 40 506 319 40 507 319 41 506 319 41 507 319 97.57
225 40 506 320 40 507 320 41 506 320 41 507 320 88.30
250 40 506 321 40 507 321 41 506 321 41 507 321 108.65
280 40 506 322 40 507 322 41 506 322 41 507 322 141.88
315 40 506 323 40 507 323 41 506 323 41 507 323 172.42
355 40 506 324 40 507 324 41 506 324 41 507 324 217.83
t 400 40 506 325 40 507 325 41 506 325 41 507 325 289.03
450 40 506 326 40 507 326 41 506 326 41 507 326 366.25
OD 500 40 506 327 40 507 327 41 506 327 41 507 327 451.63
560 40 506 328 40 507 328 41 506 328 41 507 328 566.98
630 40 506 329 40 507 329 41 506 329 41 507 329 718.50
710 40 506 330 40 507 330 41 506 330 41 507 330 901.98
800 40 506 332 40 507 332 41 506 332 41 507 332 1,144.68
S
NEW LARGER SIZE 900 40 506 333 40 507 333 41 506 333 41 507 333 1,448.43
NOW AVALABLE 1000
1200
40 506 334
40 506 335
40 507 334
40 507 335
41 506 334
41 506 335
41 507 334
41 507 335
1,787.97
2,581.12

Straight lengths up to 18m may be available to order - please contact our Sales Office for further information

Size Max OD Mean Bore Min t Max t Mean Weight


(mm) (mm) (mm) (mm) (mm) (kg/m)

90 90.6 79.0 5.4 6.1 1.5


110 110.7 96.0 6.6 7.4 2.2
125 125.8 110.0 7.4 8.3 2.8
160 161.0 140.0 9.5 10.6 4.5
180 181.1 158.0 10.7 11.9 5.7
200 201.2 176.0 11.9 13.2 7.0
225 226.4 200.0 13.4 14.9 8.9
250 251.5 220.0 14.8 16.4 10.9
280 281.7 246.0 16.6 18.4 13.6
315 316.9 277.0 18.7 20.7 17.3
355 357.2 312.0 21.1 23.4 22.0
400 402.4 351.0 23.7 26.2 27.8
450 452.7 395.0 26.7 29.5 35.1
500 503.0 439.0 29.7 32.8 43.4
560 563.4 492.0 33.2 36.7 54.4
630 633.8 553.0 37.4 41.3 68.9
710 716.4 625.0 42.1 46.5 87.5
800 807.2 704.0 47.4 52.3 111.0
900 908.1 792.0 53.3 58.8 140.4
1000 1009.0 880.0 59.3 65.4 173.5
1200 1210.8 1056.0 71.1 78.5 251.1

GPS pipes, manufactured to BS EN 12201-2 standard, are capable of withstanding transient


surge pressures of up to twice the rated pressure of the pipe.

6
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 7

EXCEL (PE100) PIPE


FOR PRESSURISED WATER SUPPLY AND SEWAGE DUTIES

Straight Lengths - SDR21

Size Black Black Blue Blue


Per Metre
(mm) 6M Code 12M Code 6M Code 12M Code

160 40 519 317 40 539 317 41 519 317 41 539 317 36.67
180 40 519 318 40 539 318 41 519 318 41 539 318 45.77
225 40 519 320 40 539 320 41 519 320 41 539 320 70.85
250 40 519 321 40 539 321 41 519 321 41 539 321 88.80
280 40 519 322 40 539 322 41 519 322 41 539 322 115.92
315 40 519 323 40 539 323 41 519 323 41 539 323 140.53
355 40 519 324 40 539 324 41 519 324 41 539 324 177.68
400 40 519 325 40 539 325 41 519 325 41 539 325 236.00
450 40 519 326 40 539 326 41 519 326 41 539 326 298.58
500 40 519 327 40 539 327 41 519 327 41 539 327 368.49
560 40 519 328 40 539 328 41 519 328 41 539 328 461.90
t 630 40 519 329 40 539 329 41 519 329 41 539 329 584.43
710 40 519 330 40 539 330 41 519 330 41 539 330 659.38
OD 800 40 519 332 40 539 332 41 519 332 41 539 332 938.87
900 40 519 333 40 539 333 41 519 333 41 539 333 1,187.70
1000 40 519 334 40 539 334 41 519 334 41 539 334 1,465.95
1200 40 519 335 40 539 335 41 519 335 41 539 335 2,113.51
S
NEW LARGER SIZE Straight lengths up to 18m may be available to order - please contact our Sales Office for further information
NOW AVALABLE

Size Max OD Mean Bore Min t Max t Mean Weight


(mm) (mm) (mm) (mm) (mm) (kg/m)

160 161.0 144.0 7.7 8.7 3.7


180 181.1 162.0 8.6 9.8 4.7
225 226.4 203.0 10.8 12.0 7.3
250 251.5 225.0 11.9 13.2 9.0
280 281.7 253.0 13.4 14.9 11.2
315 316.9 284.0 15.0 16.6 14.2
355 357.2 320.0 16.9 18.7 17.9
400 402.4 361.0 19.1 21.2 22.8
450 452.7 406.0 21.5 23.8 28.9
500 503.0 451.0 23.9 26.4 35.6
560 563.4 506.0 26.7 29.5 44.6
630 633.8 569.0 30.0 33.1 56.4
710 716.4 641.0 33.9 37.4 71.5
800 807.2 722.0 38.1 42.1 90.6
900 908.1 812.0 42.9 47.3 114.7
1000 1009.0 902.0 47.7 52.6 141.7
1200 1210.8 1085.0 57.2 63.1 204.5

GPS pipes, manufactured to BS EN 12201-2 standard, are capable of withstanding transient


surge pressures of up to twice the rated pressure of the pipe.

7
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 8

EXCEL (PE100) PIPE


FOR PRESSURISED WATER SUPPLY AND SEWAGE DUTIES

Straight Lengths - SDR26

Size Black Black Blue Blue


Per Metre
(mm) 6M Code 12M Code 6M Code 12M Code

160 40 518 317 40 528 317 41 518 317 41 528 317 29.63
180 40 518 318 40 528 318 41 518 318 41 528 318 37.43
225 40 518 320 40 528 320 41 518 320 41 528 320 57.92
250 40 518 321 40 528 321 41 518 321 41 528 321 72.42
280 40 518 322 40 528 322 41 518 322 41 528 322 94.75
315 40 518 323 40 528 323 41 518 323 41 528 323 115.00
355 40 518 324 40 528 324 41 518 324 41 528 324 145.17
400 40 518 325 40 528 325 41 518 325 41 528 325 192.93
450 40 518 326 40 528 326 41 518 326 41 528 326 243.80
500 40 518 327 40 528 327 41 518 327 41 528 327 300.85
560 40 518 328 40 528 328 41 518 328 41 528 328 377.33
t 630 40 518 329 40 528 329 41 518 329 41 528 329 477.25
710 40 518 330 40 528 330 41 518 330 41 528 330 603.87
OD 800 40 518 332 40 528 332 41 518 332 41 528 332 766.28
900 40 518 333 40 528 333 41 518 333 41 528 333 969.53
1000 40 518 334 40 528 334 41 518 334 41 528 334 1,196.83
1200 40 518 335 40 528 335 41 518 335 41 528 335 1,734.20
S
NEW LARGER SIZE Straight lengths up to 18m may be available to order - please contact our Sales Office for further information
NOW AVALABLE
Note: SDR26 pipe can be suitable for low or zero pressure applications in favourable ground conditions. Please contact our
Technical Support Department for further information

Size Max OD Mean Bore Min t Max t Mean Weight


(mm) (mm) (mm) (mm) (mm) (kg/m)

160 161.0 147.0 6.2 7.0 3.0


180 181.1 166.0 6.9 7.7 3.8
225 226.4 208.0 8.6 9.6 5.9
250 251.5 230.0 9.6 10.7 7.3
280 281.7 258.0 10.7 11.9 9.0
315 316.9 290.0 12.1 13.5 11.5
355 357.2 327.0 13.6 15.1 14.5
400 402.4 369.0 15.3 17.0 18.4
450 452.7 415.0 17.2 19.1 23.2
500 503.0 461.0 19.1 21.1 28.7
560 563.4 517.0 21.4 23.7 35.9
630 633.8 581.0 24.1 26.7 45.5
710 716.4 655.0 27.2 30.1 57.8
800 807.2 738.0 30.6 33.8 73.2
900 908.1 830.0 34.4 38.3 93.0
1000 1009.0 922.0 38.2 42.3 114.2
1200 1210.8 1109.0 45.9 50.6 165.0

GPS pipes, manufactured to BS EN 12201-2 standard, are capable of withstanding transient


surge pressures of up to twice the rated pressure of the pipe.

Black PE100 pipe for electric cable ducting applications and PE100 pipe manufactured to DIN 8074/8075 standards are available to order.
Please contact our Sales Office for further information.

8
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 9

EXCEL (PE100) PIPE


FOR PRESSURISED WATER SUPPLY AND SEWAGE DUTIES

Lengths & Bundles


Approx. Weight
Width Size Length No / Width Height
SDR11 SDR17 SDR21 SDR26
(mm) m Bundle (mm) (mm)
(kg) (kg) (kg) (kg)
Height

6 100 1188 795 1306 901 - -


90
12 100 1188 795 2604 1795 - -
6 67 1238 795 1302 896 - -
110
12 67 1238 795 2597 1782 - -
6 50 1238 750 1256 854 716 -
125
12 50 1238 750 2504 1697 1410 -
6 33 1238 795 1360 925 - 630
160
12 33 1238 795 2712 1843 - 1251
6 22 1188 730 1144 782 634 524
180
12 22 1188 730 2281 1556 1276 1041
6 18 1238 845 1156 797 - -
200
12 18 1238 845 2305 1586 - -
6 18 1238 897 1462 999 811 669
225
12 18 1238 897 2868 1989 1631 1331
6 11 1112 770 1099 748 614 505
250
12 11 1112 770 2191 1490 1234 1003
6 11 1238 845 1375 940 774 632
280
12 11 1238 845 2741 1872 1540 1255
6 8 1060 947 1264 862 706 580
315 12 8 1060 947 - 1718 1386 1153
12 3 945 440 889 - - -
6 8 1188 1049 1608 1099 896 734
355 12 8 1188 1049 - 2152 1797 1460
12 3 1065 480 1171 - - -
6 3 1200 510 763 519 424 347
400
12 3 1200 510 1521 1032 843 863
6 3 1350 560 965 655 534 436
450
12 3 1350 560 1926 1306 1065 917
6 2 1000 610 793 539 440 359
500
12 2 1000 610 1584 1075 1096 892
6 2 1120 670 990 655 549 449
560
12 2 1120 670 1977 1307 1096 894
6 2 1260 740 1245 840 695 565
630
12 2 1260 740 2487 1678 1733 1127
6 2 1420 820 - 1064 880 716
710
12 2 1420 820 - 2124 1757 1434
6 1 800 800 - 670 549 447
800
12 1 800 800 - 1339 1104 894
6 1 900 900 - 846 699 572
900
12 1 900 900 - 1692 1398 1143
6 1 1000 1000 - 1063 863 704
1000
12 1 1000 1000 - 2125 1726 1408
6 1 1200 1200 - - 1225 993
1200
12 1 1200 1200 - - 2451 1986

Straight lengths up to 18m may be available to order - please contact our Sales Office for
further information

Note: SDR26 pipe can be suitable for low or zero pressure applications in favourable ground
conditions. Please contact our Technical Support Department for further information

9
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 10

EXCEL (PE100) PIPE


FOR PRESSURISED WATER SUPPLY AND SEWAGE DUTIES

Coils - SDR11

Size
Length (m) Black Code Blue Code Per Metre
(mm)

50 40 559 312 41 559 312 14.69


75
100 40 560 312 41 560 312 14.69
50 40 559 313 41 559 313 21.10
90
100 40 560 313 41 560 313 21.10
50 40 559 314 41 559 314 32.65
110
100 40 560 314 41 560 314 32.65
50 40 559 315 41 559 315 42.53
125
d 100 40 560 315 41 560 315 42.53
50 40 559 317 41 559 317 69.95
160
100 40 560 317 41 560 317 69.95
50 40 559 318 41 559 318 87.12
180
100 40 560 318 41 560 318 87.12

Mean
Size Length d D W Approx.
D W Bore
(mm) (m) (mm) (mm) (mm) Weight (kg)
(mm)
50 61.0 1500 1900 310 73.0
75
100 61.0 1500 2300 310 145.0
50 72.9 1800 2360 360 106.0
90
100 72.9 1800 2540 450 212.0
50 89.1 2500 2700 450 160.0
110
100 89.1 2500 2900 570 318.0
50 101.3 2500 3000 500 204.0
125
100 101.3 2500 3250 560 408.0
50 129.8 3000 3900 490 337.0
160
100 129.8 3000 3900 650 670.0
50 146.0 3000 3720 550 422.5
180
100 146.0 3000 3720 900 845.0

Coils - SDR17

Size
Length (m) Black Code Blue Code Per Metre
(mm)

50 40 548 312 41 548 312 9.72


75
100 40 549 312 41 549 312 9.72
50 40 548 313 41 548 313 14.20
90
100 40 549 313 41 549 313 14.20
50 40 548 314 41 548 314 21.28
110
100 40 549 314 41 549 314 21.28
50 40 548 315 41 548 315 27.62
d 125
100 40 549 315 41 549 315 27.62
50 40 548 317 41 548 317 44.58
160
100 40 549 317 41 549 317 44.58
50 40 548 318 41 548 318 56.42
180
100 40 549 318 41 549 318 56.42

Mean
D W Size Length d D W Approx.
Bore
(mm) (m) (mm) (mm) (mm) Weight (kg)
(mm)
GPS pipes, manufactured to BS EN 50 66.0 1800 2200 390 51.0
75
12201-2 standard, are capable of 100 66.0 1800 2500 390 102.0
withstanding transient surge 50 78.7 2500 3100 270 69.5
90
pressures of up to twice the rated 100 78.7 2500 3300 360 139.0
pressure of the pipe. 50 96.3 2500 2800 450 104.0
110
100 96.3 2500 3100 570 206.0
50 109.5 2500 3500 400 133.0
125
100 109.5 2500 3750 500 266.0
50 140.3 3000 3900 490 220.0
160
100 140.3 3000 3900 650 438.0
50 158.0 3000 3720 550 274.5
180
100 158.0 3000 3720 900 549.0

10
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 11

EXCEL (PE100) PIPE


FOR PRESSURISED WATER SUPPLY AND SEWAGE DUTIES

EXCEL 3c Coils - SDR11

Mean
Size Length Per d D W Approx.
Blue Code Bore
(mm) (m) Metre (mm) (mm) (mm) Weight (kg)
(mm)
50 41 845 313 25.35 72.9 1800 2360 360 106.0
90 75 41 862 313 25.35 72.9 1800 3080 380 157.0
100 41 860 313 25.35 72.9 1800 2540 450 212.0
50 41 845 314 35.95 89.1 2500 2700 450 160.0
110 75 41 862 314 35.95 89.1 2500 2900 450 235.0
100 41 860 314 35.95 89.1 2500 2900 570 318.0
50 41 845 315 45.02 101.3 2500 3000 500 204.0
d
125 75 41 862 315 45.02 101.3 2500 3200 450 302.0
100 41 860 315 45.02 101.3 2500 3250 560 408.0
50 41 845 317 70.17 129.8 3000 3900 490 337.0
160 75 41 862 317 70.17 129.8 3000 3900 600 497.0
100 41 860 317 70.17 129.8 3000 3900 650 679.0
50 41 845 318 85.92 146.0 3000 3720 550 422.5
D W 180 75 41 862 318 85.92 146.0 3000 3700 790 626.0
100 41 860 318 85.92 146.0 3000 3720 900 845.0

Excel 3c factory clean pipe is a unique solution to negate the need for the lengthy pipe pre-chlorination process
prior to installation of potable water pipes. The DWI recognised methodology allows post-installation sterilisation
for 30 minutes contact only.
Available to order - for further information, please contact our Sales Office.

EXCEL 3c Coils - SDR17

Mean
Size Length Per d D W Approx.
Blue Code Bore
(mm) (m) Metre (mm) (mm) (mm) Weight (kg)
(mm)
50 41 846 313 19.02 78.7 2500 3100 270 69.5
90 75 41 847 313 19.02 78.7 2500 3080 380 108.0
100 41 849 313 19.02 78.7 2500 3300 360 139.0
50 41 846 314 25.52 96.3 2500 2800 450 104.0
110 75 41 847 314 25.52 96.3 2500 3200 500 162.0
100 41 849 314 25.52 96.3 2500 3100 570 206.0
d
50 41 846 315 31.33 109.5 2500 3500 400 133.0
125 75 41 847 315 31.33 109.5 2500 3200 450 204.0
100 41 849 315 31.33 109.5 2500 3750 500 266.0
50 41 846 317 46.90 140.3 3000 3900 490 220.0
160 75 41 847 317 46.90 140.3 3000 3900 600 337.0
100 41 849 317 46.90 140.3 3000 3900 650 438.0
50 41 846 318 57.75 158.0 3000 3720 550 274.5
D W
180 75 41 847 318 57.75 158.0 3000 3700 790 423.0
100 41 849 318 57.75 158.0 3000 3720 900 549.0

Geothermal Coils - SDR11


Mean
Size Length Per d D W Approx.
Black Code Bore
(mm) (m) Metre (mm) (mm) (mm) Weight (kg)
(mm)
50 GE 559 308 P.O.A. 26 700 1020 150 13.8
32 100 GE 560 308 P.O.A. 26 700 1090 220 27.5
150 GE 561 308 P.O.A. 26 700 1090 310 41.0
200 GE 567 308 P.O.A. 26 700 1090 400 55.0
50 GE 559 309 P.O.A. 32 1300 1500 220 21.5
40 100 GE 560 309 P.O.A. 32 1300 1700 220 43.0
d
150 GE 561 309 P.O.A. 32 1300 1800 300 64.5

GPS pipes, manufactured to BS EN 12201-2 standard, are capable of withstanding transient surge pressures of up
to twice the rated pressure of the pipe.

D W
NEW PRODUCT

11
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 12

PE80 PIPE
FOR PRESSURISED GAS SUPPLY (and water or sewage duties at 63mm size only)

Straight Lengths - SDR11

Size Black Blue Per Metre Yellow Yellow Per Metre


(mm) 6M Code 6M Code Black/Blue 6M Code 12M Code Yellow

63 50 513 311 51 513 311 9.20 - - -


90 - - - 52 512 313 52 527 313 24.73
125 - - - 52 512 315 52 527 315 45.40
180 - - - 52 512 318 52 527 318 93.93
250 - - - 52 512 321 52 527 321 181.13
315 - - - 52 512 323 52 527 323 286.87
355 - - - 52 512 324 52 527 324 363.88

Straight lengths up to 18m may be available to order - please contact our


Sales Office for further information

t
Size Max OD Mean Bore Min t Max t Mean Weight
OD (mm) (mm) (mm) (mm) (mm) (kg/m)

63 63.4 51.0 5.8 6.5 1.0


90 90.6 73.0 8.2 9.2 2.1
125 125.8 101.0 11.4 12.7 4.0
180 181.1 146.0 16.4 18.2 8.2
250 251.5 203.0 22.7 25.1 15.8
315 316.9 256.0 28.6 31.6 25.0
355 357.2 288.0 32.2 35.6 31.9

Straight Lengths - SDR13.6

Size Yellow Max OD Mean Bore Min t Max t Mean Weight


Per Metre
(mm) 6M Code (mm) (mm) (mm) (mm) (kg/m)

63 52 576 311 11.13 63.4 53.2 4.7 5.3 0.85


75 52 576 312 12.18 75.5 63.4 5.6 6.3 1.20

OD

12
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 13

PE80 PIPE
FOR PRESSURISED GAS SUPPLY

Straight Lengths - SDR17.6 (available in Yellow only)

Size Yellow Yellow Max OD Mean Bore Min t Max t Mean Weight
Per Metre
(mm) 6M Code 12M Code (mm) (mm) (mm) (mm) (kg/m)

90 52 511 313 52 526 313 16.08 90.6 79.0 5.2 5.9 1.4
125 52 511 315 52 526 315 31.02 125.8 110.0 7.1 8.0 2.6
140 52 511 316 52 526 316 38.78 140.9 124.0 8.0 8.9 3.2
180 52 511 318 52 526 318 63.85 181.1 159.0 10.3 11.5 5.4
250 52 511 321 52 526 321 117.73 251.5 221.0 14.2 15.8 10.3
315 52 511 323 52 526 323 184.77 316.9 278.0 17.9 19.8 16.3
355 52 511 324 52 526 324 235.45 357.2 314.0 20.2 22.4 20.7
400 52 511 325 52 526 325 300.12 402.4 353.0 22.8 25.2 26.3
450 52 511 326 52 526 326 377.85 452.7 397.0 25.6 28.3 33.3
500 52 511 327 52 526 327 467.25 503.0 442.0 28.4 31.4 41.0
560 52 511 328 52 526 328 577.07 563.4 495.0 31.9 35.2 51.5

OD

Lengths & Bundles


Approx. Weight
Width Size Length No / Width Height SDR11 SDR13.6 SDR17/17.6
(mm) (m) Bundle (mm) (mm) (kg) (kg) * (kg)
Height

6 210 1238 750 1334 1099 -


63
12 210 1238 750 2659 - -
6 160 959 750 - 1221 -
75
12 - - - - - -
6 100 1188 795 1290 - 848
90
12 100 1188 795 2571 - 1688
6 50 1238 750 1251 - 811
125
12 50 1238 750 2493 - 1613
6 45 1238 717 - - 890
140
12 45 1238 717 - - 1755
6 22 1188 730 1130 - 741
180
12 22 1188 730 2253 - 1476
6 11 1112 770 1075 - 708
250
12 11 1112 770 2143 - 1409
6 8 1060 947 1237 - 812
315
12 8 1060 947 2468 - 1617
6 8 1188 1049 1576 - 1035
355
12 8 1188 1049 3144 - 2062
6 3 1200 510 748 - 491
400
12 3 1200 510 1490 - 976
6 3 1350 560 943 - 617
450
12 3 1350 560 1857 - 1232
6 2 1000 610 387 - 507
500
12 2 1000 610 777 - 1012
6 2 1120 670 968 - 636
560
12 2 1120 670 1936 - 1269

Straight lengths up to 18m may be available to order - please contact our


Sales Office for further information.

*SDR17.6 available in yellow only.

Note: due to continuous development, bundle sizes and weights may vary from that shown.

13
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 14

PE80 PIPE
FOR PRESSURISED GAS SUPPLY

Coils - SDR17.6 (available in Yellow only)

Size Length Yellow Per d D W Approx.


(mm) (m) Code Metre (mm) (mm) (mm) Weight (kg)

50 52 569 313 16.08 2500 2960 270 71.0


90
100 52 570 313 16.08 2500 3040 360 142.0
50 52 569 315 31.02 3000 3500 375 136.0
125
100 52 570 315 31.02 3000 3700 500 272.0
50 52 569 316 38.78 3000 3300 500 162.0
140
100 52 570 316 38.78 3000 3300 550 324.0
d 50 52 569 318 63.85 3000 3720 540 281.0
180
100 52 570 318 63.85 3000 3720 900 563.0

D W

Coils - SDR13.6

Size Length Yellow Per d D W Approx.


(mm) (m) Code Metre (mm) (mm) (mm) Weight (kg)

50 52 577 311 11.13 1400 1765 230 42.4


63 100 52 578 311 11.13 1400 1940 330 84.7
150 52 579 311 11.13 1400 2075 400 127.1
50 52 577 312 11.85 1520 1800 410 60.0
75
100 52 578 312 11.85 1520 2050 410 120.0

D W

Black PE80 pipe manufactured to DIN 8074/8075 standards is available to order - please contact our Sales Office for further information.

14
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 15

PE80 PIPE
FOR PRESSURISED GAS SUPPLY (and water or sewage duties at 63mm and below)

Coils - SDR11

Size Length Black Blue Per Metre Yellow Per Metre


(mm) (m) Code Code Black/Blue Code Yellow

25 50 558 306 51 558 306 1.24 - -


50 50 559 306 51 559 306 1.24 52 559 306 1.50
20*
100 50 560 306 51 560 306 1.24 52 560 306 1.50
150 50 561 306 51 561 306 1.24 - -
25 50 558 307 51 558 307 1.45 - -
50 50 559 307 51 559 307 1.45 52 559 307 1.97
25
100 50 560 307 51 560 307 1.45 52 560 307 1.97
d 150 50 561 307 51 561 307 1.45 - -
25 50 558 308 51 558 308 2.42 - -
50 50 559 308 51 559 308 2.42 52 559 308 3.28
32
100 50 560 308 51 560 308 2.42 52 560 308 3.28
150 50 561 308 51 561 308 2.42 52 561 308 3.28
25 50 558 310 51 558 310 8.68 - -
50 50 559 310 51 559 310 8.68 - -
50
100 50 560 310 51 560 310 8.68 - -
D W
150 50 561 310 51 561 310 8.68 - -
25 50 558 311 51 558 311 9.20 - -
50 50 559 311 51 559 311 9.20 52 559 311 12.37
*SDR9 only. 63
100 50 560 311 51 560 311 9.20 52 560 311 12.37
150 50 561 311 51 561 311 9.20 - -
50 - - - 52 559 313 24.73
90
100 - - - 52 560 313 24.73
50 - - - 52 559 315 45.40
125
100 - - - 52 560 315 45.40
50 - - - 52 559 318 93.93
180
100 - - - 52 560 318 93.93

* SDR 9 only

Mean Min Max Approx.


Size Length d D W
Bore t t Weight
(mm) (m) (mm) (mm) (mm)
(mm) (mm) (mm) (kg)
25 15.2 600 750 120 2.3 2.7 3.3
50 15.2 600 790 140 2.3 2.7 6.5
20*
100 15.2 600 860 180 2.3 2.7 13.0
150 15.2 600 860 250 2.3 2.7 18.5
25 20.1 600 830 90 2.3 2.7 4.3
50 20.1 600 820 170 2.3 2.7 8.4
25
100 20.1 600 890 200 2.3 2.7 16.7
150 20.1 600 890 290 2.3 2.7 25.1
25 25.8 700 960 100 3.0 3.4 6.8
50 25.8 700 1020 150 3.0 3.4 13.9
32
100 25.8 700 1090 220 3.0 3.4 27.8
150 25.8 700 1090 310 3.0 3.4 41.7
25 40.4 1300 1500 150 4.6 5.2 16.2
50 40.4 1300 1410 150 4.6 5.2 32.5
50
100 40.4 1300 1560 220 4.6 5.2 66.6
150 40.4 1300 1690 220 4.6 5.2 99.9
25 50.9 1300 1600 190 5.8 6.5 25.8
50 50.9 1300 1780 190 5.8 6.5 52.7
63
100 50.9 1300 1960 280 5.8 6.5 105.3
150 50.9 1300 2130 280 5.8 6.5 158.0
50 72.9 1800 2360 360 8.2 9.2 105.0
90
100 72.9 1800 2540 450 8.2 9.2 210.0
50 101.3 2500 3000 500 11.4 12.7 201.0
125
100 101.3 2500 3250 560 11.4 12.7 403.0
50 146.0 3000 3720 540 16.4 18.2 417.0
180
100 146.0 3000 3720 900 16.4 18.2 834.0

15
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 16

SECURA-LINE
FOR PRESSURISED GAS SUPPLY - PEELABLE PE100 PIPE WITH OUTER POLYPROPYLENE SKIN

Straight Lengths - SDR21

Size Yellow 6m Yellow 12m


Per Metre
(mm) Code Code

250 59 519 321 59 539 321 107.57


280 59 519 322 59 539 322 140.47
315 59 519 323 59 539 323 170.68
355 59 519 324 59 539 324 215.65
400 59 519 325 59 539 325 274.60
450 59 519 326 59 539 326 347.93
500 59 519 327 59 539 327 429.05

Size Min OD Max OD Mean Bore Min t Max t Mean Weight


t (mm) (mm) (mm) (mm) (mm) (mm) (kg/m)
OD 250 251.2 254.5 225.0 12.5 14.7 9.7
280 281.2 282.9 252.0 13.4 15.0 12.3
315 316.2 319.9 284.0 15.6 18.1 15.1
355 356.2 360.0 320.0 17.5 20.2 19.1
400 401.2 405.4 361.0 19.6 22.5 24.0
450 451.2 455.7 406.0 22.0 25.2 30.3
500 501.2 506.0 451.0 24.5 27.8 37.3

Lengths & Bundles - SDR21

Size Length Width Height Weight


Width No/Bundle
(mm) (m) (mm) (mm) (Kg)
Height

250 6/12 4 1000 360 243/482


280 6/12 4 1020 390 307/610
315 6/12 3 945 425 282/560
355 6/12 3 1065 465 356/707
400 6/12 3 1200 510 445/886
450 6/12 3 1350 560 559/1114
500 6/12 2 1000 610 457/911

16
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 17

SECURA-LINE
FITTINGS PUPPED WITH PEELABLE PE100 PIPE WITH OUTER POLYPROPYLENE SKIN

SDR21 SlimFlange Assemblies


t
t SDR
Size Yellow L B
Each SDR21 Weight
(mm) Code (mm) (mm)
(mm) (kg)
250 x 200 PN16 59 487 321 378.30 500 610 27 7.0
315 x 250 PN16 59 487 323 535.00 500 610 30 10.0
355 x 300 PN16 59 487 324 880.80 500 610 35 17.0
L 400 x 350 PN16 59 487 325 1,182.70 500 610 38 26.0
B 450 x 400 PN16 59 487 326 1,588.20 1000 1110 42 31.0
500 x 450 PN16 59 487 327 1,760.40 1000 1110 45 37.0

The SlimFlange is a unique product and allows size-for-size connection of a PE pipeline to a metal flange
without loss of nominal bore. It is only sold as a complete assembly.
Secura-Line SlimFlange Assemblies comprise of SlimFlange, galvanised mild steel backing ring, full faced
gasket and bolt set.

L = Available leg length, standard = 0.5m for 90mm to 400mm sizes, 1.0m for 450mm to 800mm sizes.

SDR21 90 Mitred Elbows

L SDR
Size Yellow Z
Each Weight
(mm) Code (mm)
(kg)
250 59 248 321 469.40 825 15.0
280 59 248 322 716.90 864 19.0
Z 315 59 248 323 952.30 907 25.0
R 355 59 248 324 1,069.00 962 33.0
400 59 248 325 1,287.30 1020 47.0
450 59 248 326 1,436.00 1585 88.0
500 59 248 327 1,698.10 1650 113.0

L = Available leg length standard = 0.5m.


R = Radius of curvature = Approx 1.5 x D (the pipe size).
We can supply longer legs for some butt-fusion machines.

SDR21 45 Mitred Elbows

SDR
Size Yellow Z
Each Weight
L

(mm) Code (mm)


(kg)
250 59 247 321 424.30 606 12.0
280 59 247 322 582.10 618 15.0
315 59 247 323 764.00 632 19.0
Z R 355 59 247 324 987.20 650 25.0
400 59 247 325 1,193.10 669 31.0
450 59 247 326 1,363.20 1191 72.0
500 59 247 327 1,611.50 1211 91.0

L = Available leg length standard = 0.5m.


R = Radius of curvature = Approx 1.5 x D (the pipe size).
We can supply longer legs for some butt-fusion machines.

17
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 18

SECURA-LINE
FITTINGS PUPPED WITH PEELABLE PE100 PIPE WITH OUTER POLYPROPYLENE SKIN

SDR21 22.5 Mitred Elbows

SDR
Size Yellow Z
Each Weight
(mm) Code (mm)
(kg)
L

250 59 246 321 330.00 525 11.0


280 59 246 322 358.00 528 13.0
315 59 246 323 582.10 531 17.0
Z R 355 59 246 324 749.00 536 26.0
400 59 246 325 960.90 540 27.0
450 59 246 326 1,136.40 1045 64.0
500 59 246 327 1,344.00 1050 78.0

L = Available leg length standard = 0.5m.


R = Radius of curvature = Approx 1.5 x D (the pipe size).
We can supply longer legs for some butt-fusion machines.

SDR21 11.25 Mitred Elbows

SDR
Size Yellow Z
Each Weight
(mm) Code (mm)
L

(kg)
250 59 245 321 330.00 512 11.0
280 59 245 322 358.00 514 13.0
315 59 245 323 582.10 516 17.0
Z R
355 59 245 324 748.00 518 26.0
400 59 245 325 960.90 520 27.0
450 59 245 326 1,136.40 1022 64.0
500 59 245 327 1,342.90 1025 78.0

L = Available leg length standard = 0.5m.


R = Radius of curvature = Approx 1.5 x D (the pipe size).
We can supply longer legs for some butt-fusion machines.

SDR21 Pupped Reducers


B SDR21
Size Yellow B L
Each Weight
(mm) Code (mm) (mm)
(kg)
L L 250 x 180* 59 322 529 394.70 1290 500 10
315 x 180* 59 322 531 398.00 1655 500 20
315 x 250 59 322 543 570.00 1330 500 17
355 x 250 59 322 544 P.O.A. 1380 500 22
355 x 315 59 322 547 P.O.A. 1380 500 25
400 x 250 59 322 563 P.O.A. 1405 500 26
400 x 315 59 322 565 P.O.A. 1405 500 29
400 x 355 59 322 566 P.O.A. 1410 500 38
* 180mm Spigot End is SDR17.6 Yellow PE80.

18
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 19

SECURA-LINE
FITTINGS PUPPED WITH PEELABLE PE100 PIPE WITH OUTER POLYPROPYLENE SKIN

SDR21 Pupped Equal Tees

SDR21
Size Yellow L B Z
Each Weight
(mm) Code (mm) (mm) (mm)
(kg)
250 59 320 321 P.O.A. 500 1540 840 26.0
280 59 320 322 P.O.A. 500 1680 840 33.8
315 59 320 323 1,222.00 500 1820 910 43.9
355 59 320 324 1,859.00 500 1690 845 59.3
400 59 320 325 P.O.A. 500 1722 860 75.4
450 59 320 326 P.O.A. 1000 2670 1450 -
500 59 320 327 P.O.A. 1000 2720 1475 -
L
Z
L L

SDR21 Pupped Reduced Branch Tees

SDR21
Size Yellow L B Z
S
NEW LARGER SIZE
Each Weight
(mm) Code (mm) (mm) (mm)
(kg)
NOW AVALABLE 250 x 180* 59 358 321 P.O.A. 500 1430 1000 52
315 x 180* 59 358 323 1,195.00 500 1546 1388 43
315 x 250 59 336 323 P.O.A. 500 1455 880 60
355 x 250 59 336 324 3,282.80 500 1690 975 -
355 x 315 59 285 324 P.O.A. 500 1684 1228 70
400 x 250 59 336 325 P.O.A. 500 1465 925 90
400 x 315 59 285 325 P.O.A. 500 1535 925 -
L 400 x 355 59 810 325 P.O.A. 500 1725 1261 -
Z
L L * 180mm Spigot End is SDR17.6 Yellow PE80.

SDR21 Pupped End Caps

SDR21
Size Yellow L B Z
S Each Weight
NEW LARGER SIZE (mm) Code (mm) (mm) (mm)
(kg)
NOW AVALABLE 250 59 331 321 P.O.A. 250 500 200 10
280 59 331 322 P.O.A. 280 500 235 10
315 59 331 323 P.O.A. 315 500 260 14
355 59 331 324 P.O.A. 355 500 290 16
400 59 331 325 P.O.A. 400 500 310 21
450 59 331 326 P.O.A. 450 1000 70 46
Z 500 59 331 327 P.O.A. 500 1000 75 59

19
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 20

PROTECTA-LINE
BARRIER PIPE FOR SAFELY TRANSPORTING WATER THROUGH CONTAMINATED LAND

Coils

Coil Pressure Coil Pressure


Size Per Size Per
Length SDR Rating Material Blue Code Length SDR Rating Material Blue Code
(mm) Metre (mm) Metre
(m) (bar) (m) (bar)

25 25 11 12.5 PE80 (MDPE) 44 658 307 7.37 50 11 16 PE100 (Excel) 44 659 315 54.80
50 11 12.5 PE80 (MDPE) 44 659 307 7.37 100 11 16 PE100 (Excel) 44 660 315 54.80
125
25 11 12.5 PE80 (MDPE) 44 658 308 9.52 50 17 10 PE100 (Excel) 44 655 315 41.12
32
50 11 12.5 PE80 (MDPE) 44 659 308 9.52 100 17 10 PE100 (Excel) 44 656 315 41.12
25 11 12.5 PE80 (MDPE) 44 658 311 26.08 50 17 10 PE100 (Excel) 44 655 317 50.27
160
63 50 11 12.5 PE80 (MDPE) 44 659 311 26.08 100 17 10 PE100 (Excel) 44 656 317 50.27
100 11 12.5 PE80 (MDPE) 44 660 311 26.08 50 11 16 PE100 (Excel) 44 659 318 72.90
50 11 16 PE100 (Excel) 44 659 313 31.83 100 11 16 PE100 (Excel) 44 660 318 72.90
90 180
100 11 16 PE100 (Excel) 44 660 313 31.83 50 17 10 PE100 (Excel) 44 655 318 54.82
110 50 11 16 PE100 (Excel) 44 659 314 39.12 100 17 10 PE100 (Excel) 44 656 318 54.82
100 11 16 PE100 (Excel) 44 660 314 39.12

Min Max Max Mean Max Wall Approx


Size
SDR OD OD OD Bore Thickness Weight
(mm)
(mm) (mm) (mm) (mm) (mm) (kg/m)
25 11 26.3 27.5 20.0 3.0 3.7 0.3
32 11 33.3 34.5 26.0 3.7 4.4 0.4
63 11 64.3 65.6 51.0 6.5 7.6 13.0
t
90 11 92.2 93.5 73.0 9.3 10.7 26.0
OD 110 11 112.2 113.5 89.0 11.1 12.7 37.0
11 127.2 128.5 101.2 12.5 14.2 47.0
125
17 127.2 128.5 110.0 8.5 9.8 34.0
160 17 163.2 165.1 140.0 10.7 12.4 54.0
11 183.3 185.4 146.8 17.6 20.0 95.0
180
17 183.3 185.4 158.0 11.9 13.7 68.0

Coil Dimensions
d Coil Approx
Size d D W
Length Weight
(mm) (mm) (mm) (mm)
(m) (Kg)
25 50 1000 1200 200 13.0
32 50 1000 1200 200 20.0
25 1900 2200 200 32.0
63 50 1900 2300 200 63.0
D W
100 1900 2400 300 126.0
50 2500 3100 300 122.0
90
100 2500 3300 400 244.0
50 2500 2900 500 178.0
110
100 2500 3200 600 355.0
50 2500 3000 500 162.0
125
100 2500 3200 700 323.0
50 3000 3900 500 256.0
160
100 3000 3900 700 512.0
50 3000 4000 600 320.0
180
100 3000 4000 700 640.0

Other diameters, SDRs and lengths can be made to order subject to a


minimum order value.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

20
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 21

PROTECTA-LINE
BARRIER PIPE FOR SAFELY TRANSPORTING WATER THROUGH CONTAMINATED LAND

Straight Lengths

Coil Pressure
Size Blue 6M Blue 12M Per
Length SDR Rating Material
(mm) Code Code Metre
(m) (bar)
63 6 11 12.5 PE80 (MDPE) 44 512 311 - 26.10
90 6/12 11 16 PE100 (Excel) 44 512 313 44 527 313 31.83
t 110 6/12 11 16 PE100 (Excel) 44 512 314 44 527 314 39.12
125 6/12 11 16 PE100 (Excel) 44 512 315 44 652 315 54.59
OD
6/12 17 10 PE100 (Excel) 44 653 315 44 654 315 41.12
160 6/12 17 10 PE100 (Excel) 44 653 317 44 654 317 50.27
180 6/12 11 16 PE100 (Excel) 44 512 318 44 652 318 72.90
6/12 17 10 PE100 (Excel) 44 653 318 44 654 318 54.82
225 6/12 17 10 PE100 (Excel) 44 653 320 44 654 320 66.12
250 6/12 17 10 PE100 (Excel) 44 653 321 44 654 321 81.37
280 6/12 17 10 PE100 (Excel) 44 653 322 44 654 322 95.05
315 6/12 17 10 PE100 (Excel) 44 653 323 44 654 323 107.63
355 6/12 17 10 PE100 (Excel) 44 653 324 44 654 324 119.33

Min Max Mean Min Wall Max Wall Approx


Size
SDR OD OD Bore Thickness Thickness Weight
(mm)
(mm) (mm) (mm) (mm) (mm) (kg/m)
63 11 64.3 65.6 51.0 6.5 7.6 1.3
90 11 92.2 93.5 73.0 9.3 10.7 2.6
110 11 112.2 113.5 89.0 11.1 12.7 3.7
11 127.2 128.5 101.2 12.5 14.2 4.7
125
17 127.2 128.5 110.0 8.5 9.8 3.4
160 17 163.2 165.1 140.0 10.7 12.4 5.4
11 183.3 185.4 146.8 17.6 20.0 9.5
180
17 183.3 185.4 158.0 11.9 13.7 6.8
225 17 227.3 229.5 197.0 14.6 16.6 10.2
250 17 252.3 254.9 220.0 16.0 18.3 12.4
280 17 282.3 285.1 246.0 17.8 20.1 15.3
315 17 317.3 320.2 277.0 19.9 22.4 19.2
355 17 357.3 360.6 312.0 22.3 25.1 24.2

Lengths & Bundles

Width Size Length Width Height Weight


No/Bundle
(mm) (m) (mm) (mm) (Kg)
Height

63 6 210 1238 750 1616


90 6/12 100 1188 795 1558
110 6/12 67 1238 795 1451
125 6/12 50 1238 750 1032/2054
160 6/12 33 1238 795 1040/2069
180 6/12 22 1188 730 870/1812
225 6/12 5 1125 335 310/620
250 6/12 4 1000 360 301/602
280 6/12 4 1120 390 369/738
315 6/12 3 945 425 350/700
355 6/12 3 1065 465 440/880

Other diameters, SDRs and lengths can be made to order subject to a minimum order value.
Note: due to continuous development, bundle sizes and weights may vary from that shown.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

21
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 22

PROTECTA-LINE
FOR USE ON PROTECTA-LINE APPLICATIONS AND FOR CONNECTING TO STANDARD PE PIPE

PE to PE Couplers

Size Blue A L Weight


Each
(mm) Code (mm) (mm) (kg)

25 x 25 44 100 307 8.99 51 93 0.12


32 x 32 44 100 308 10.80 60 99 0.19
63 x 63 44 100 311 38.65 105 155 0.70

PE to PE Reducing Couplers

Size Blue A B L Weight


Each
(mm) Code (mm) (mm) (mm) (kg)

32 x 25 44 114 409 13.80 60 51 100 0.15


63 x 25 44 114 412 44.95 105 81 155 0.58
63 x 32 44 114 415 44.95 105 105 155 0.78

PE to Copper Couplers

Size Blue A L Weight


Each
(mm) Code (mm) (mm) (kg)

25 x 15 44 996 005 9.72 51 93 0.12


25 x 22 44 996 006 10.20 51 93 0.13
32 x 28 44 996 007 13.95 60 93 0.21

Equal Tees

Size Blue A C L Weight


Each
(mm) Code (mm) (mm) (mm) (kg)

25 x 25 44 122 307 12.35 51 64 134 0.18


32 x 32 44 122 308 14.56 60 68 146 0.30
63 x 63 44 122 311 50.60 105 100 216 1.25

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

22
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 23

MECHANICAL COMPRESSION FITTINGS


PROTECTA-LINE
FOR USE ON PROTECTA-LINE APPLICATIONS AND FOR CONNECTING TO STANDARD PE PIPE

90 Elbows

Size Blue A C L Weight


Each
(mm) Code (mm) (mm) (mm) (kg)

25 44 115 307 8.64 51 68 93 0.13


32 44 115 308 12.35 60 71 97 0.22
63 44 115 311 38.35 105 105 158 0.90

End Connectors - PE x Male Iron BSP Tapered

Size Blue A L Weight


Each
(mm x inch) Code (mm) (mm) (kg)

25 x 34 44 151 608 5.04 51 64 0.07


32 x 34 44 151 611 7.20 60 74 0.08
32 x 1 44 151 612 7.32 60 77 0.11
63 x 112 44 151 628 24.55 105 100 0.39
63 x 2 44 151 629 24.55 105 105 0.39

End Connectors - PE x Female Iron BSP Tapered

Size Blue A L Weight


Each
(mm x inch) Code (mm) (mm) (kg)

25 x 34 44 101 608 5.76 51 67 0.08


32 x 1 44 101 612 6.96 60 75 0.12
63 x 2 44 101 629 28.90 105 100 0.43

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

23
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 24

PROTECTA-LINE MECHANICAL COMPRESSION FITTINGS

FOR USE ON PROTECTA-LINE PIPES

90 Elbows - PE x Female Iron BSP Tapered

Size Blue A C L Weight


Each
(mm x inch) Code (mm) (mm) (mm) (kg)
C
25 x 34 44 396 608 7.77 51 35 73 0.08
A
32 x 1 44 396 612 12.91 60 39 80 0.18
63 x 2 44 396 629 32.34 105 62 145 0.57

NEW PRODUCT

Reducing Sets - to allow easy Protecta-Line diameter changes


L
Size Blue A L Weight
Each
(mm) Code (mm) (mm) (kg)

32 x 25 44 105 409 4.20 44 42 0.03


A
63 x 32 44 105 415 12.85 80 51 0.15

Stop Cocks - BS 5433 Type


L
Size Blue A L Weight
Each
(mm) Code (mm) (mm) (kg)

25* 44 142 307 62.10 140 135 0.90


A
32** 44 142 308 110.70 165 170 1.70

* 25mm stop cock now includes 22mm copper Type A insert


** 32mm stop cock now includes 28mm copper Type A insert

Ductile Iron Ferrule

Size
Blue A Weight
(inch x mm) Each
Code (mm) (kg)
d1 x d2
d2 D1 A
34 x 25 44 762 407 29.75 60 0.45

d1

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

24
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 25

FERRULE OFF-TAKES
PROTECTA-LINE
FOR USE ON PROTECTA-LINE PIPES

63mm Ferrule Off-Takes (for 90mm to 355mm Protecta-Line mains)


Size
Blue A Weight
(mm) Each
NEW PRODUCT d1 x d2
Code (mm) (kg)

90 x 63 44 762 459 298.60 155 3.38


110 x 63 44 762 460 302.90 155 3.77
125 x 63 44 762 461 322.10 155 3.79
160 x 63 44 762 463 330.70 155 3.73
180 x 63 44 762 464 340.30 155 3.88
225 x 63 44 762 466 367.10 155 5.01
250 x 63 44 762 467 378.80 155 5.12
Fitting includes 1 x 63mm PE x Male Iron
BSP Tapered End Connector 280 x 63 44 762 468 391.70 155 5.29
315 x 63 44 762 469 409.90 155 4.97
355 x 63 44 762 470 423.80 155 6.12

Accessories

Blue
Item Each
Code
* O-Ring Kit enables user Protecta-Line 2" Drill Head 44 794 003 125.00
to service one Drill Head Protecta-Line 2" Liner Head 44 794 004 125.00
or one Liner Head.
Protecta-Line Drill/Liner Head O-Ring Kit* 44 996 062 1.92

90 Gunmetal Elbows, FI/MI (for use with 63mm Ferrule Off-Takes)

Size Blue A C L Weight


Each
mm x inch Code (mm) (mm) (mm) (kg)
C
63 x 2 44 996 050 73.20 72 70 90 0.89
A

L
NEW PRODUCT

25mm and 32mm Self-Tapping Ferrule Off-Takes (for 63mm to 355m Protecta-Line mains)
Size
Blue A Weight
(mm) Each
Code (mm) (kg)
A
d1 x d2
d2 D1
63 x 25 44 762 412 85.60 95 0.92
90 x 25 44 762 393 88.00 95 1.07
110 x 25 44 762 394 89.70 95 1.10
125 x 25 44 762 395 93.60 95 1.19
d1 160 x 25 44 762 397 97.40 95 1.28
D
180 x 25 44 762 398 100.60 95 1.35
225 x 25 44 762 400 201.20 95 1.90
Fitting includes 1 x PE x Female Iron 250 x 25 44 762 401 222.60 95 2.30
BSP Tapered End Connector
280 x 25 44 762 402 236.50 95 2.50
315 x 25 44 762 403 248.30 95 3.20
355 x 25 44 762 404 265.40 95 3.30
63 x 32 44 762 415 99.30 100 1.24
Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of 90 x 32 44 762 417 103.00 100 1.31
110 x 32 44 762 418 104.30 100 1.37
alternative fittings will have the following effects on your Protecta-Line system:
125 x 32 44 762 419 105.60 100 1.42
Invalidation of WRAS approval and manufacturers system performance warranty.
160 x 32 44 762 421 107.70 100 1.52
Compromised permeation resistance (causing non-compliance
180 x 32 44 762 422 110.50 100 1.60
with WIS 4-32-19 and possible risks to health).
225 x 32 44 762 424 224.70 100 2.10
Danger of pipe-layer delamination, compromising system
250 x 32 44 762 425 250.40 100 2.50
performance integrity and risking pipe bursts.
WIS 4-32-19 280 x 32 44 762 426 263.30 100 2.70
It would be illegal to install non-WRAS approved fittings. KM 514626
315 x 32 44 762 427 276.10 100 3.40
355 x 32 44 762 428 306.10 100 3.50

25
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 26

PROTECTA-LINE FLUID COMPRESSION FITTINGS

Couplers

Size Blue
SDR Each
(mm) Code

63 11 44 110 311 76.60


90 11 44 100 313 107.90
110 11 44 100 314 158.80
125 17 44 109 315 241.90
160 17 44 109 317 323.90
180 17 44 109 318 338.60

Consists of 1 x liner and 1 x


standard full sized shell. Weight Size* A B C D E F G Weight
shown is for complete product. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

63 82 50 43 36 102 84 66 1.3
90 116 71 62 53 136 111 94 2.7
110 141 87 74 60 161 133 114 4.8
125 160 107 95 70 180 196 130 6.2
160 180 138 122 80 200 184 166 11.2
180 210 155 137 95 230 207 188 15.5

Consists of 1 x liner and 1 x standard full sized shell. Weight shown is for complete product.
Note: WIS 4-24-01 Type 1 approved fitting.
For full shell dimensions, refer to Table 1 on p 27

Reducers

Size Blue
SDR Each
(mm) Code

90 x 63 11 44 441 459 211.60


110 x 90 11 44 441 483 266.20
125 x 110* 17 44 440 493 324.30
160 x 125 17 44 440 504 531.50
180 x 125 17 44 440 505 671.20

Consists of 1 x reducing liner


and 2 x half sized shells. Weight Size* A B C D E F Weight
shown is for complete product. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

Please note that both ends of all 90 x 63 260 71 62 81 50 43 4.3


reducers are for the stated SDR. 110 x 90 290 87 75 100 71 62 7.3
125 x 110* 428 107 95 152 86 74 8.4
160 x 125 335 138 125 87 95 83 15.9
180 x 125 340 156 142 114 108 96 18.7

*125mm SDR17 reducing down to 110mm SDR11

For half shell dimensions, refer to Table 2 on p 27

NOTE: WIS 4-24-01 Type 1 Approved fitting.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

26
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 27

FLUID COMPRESSION FITTINGS


PROTECTA-LINE
Full Shell Dimensions Table 1

Size A B C
(mm) (mm) (mm) (mm)

63 102 79 66
90 136 110 94
110 161 133 114
125 180 196 130
160 200 184 166
180 230 207 188

Half Shell Dimensions Table 2

Size A B C
(mm) (mm) (mm) (mm)

90 111 110 94
110 125 133 114
125 125 196 130
160 150 184 166
180 172 207 188

Note: WIS 4-24-01 Type 1 approved fitting.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

27
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 28

PROTECTA-LINE FLUID COMPRESSION FITTINGS

90 Elbows

Size Blue A B C D Weight


SDR Each
(mm) Code (mm) (mm) (mm) (mm) (kg)

63 11 44 209 311 165.10 115 50 43 81 3.0


90 11 44 210 313 270.90 124 71 61 100 5.4
110 11 44 210 314 296.20 138 87 74 119 9.5
125 17 44 208 315 378.00 138 107 95 87 11.3
160 17 44 208 317 555.50 167 137 122 114 22.2
180 17 44 208 318 707.10 192 155 137 130 27.7

For half shell dimensions, refer to Table 2 on p 27

B C

A D Consists of 1 x elbow liner and 2 x half sized shells. Weight shown is for complete product.

45 Elbows

Size Blue A B C D Weight


SDR Each
(mm) Code (mm) (mm) (mm) (mm) (kg)

63 11 44 215 311 158.60 115 50 43 40 2.9


90 11 44 216 313 268.70 124 71 61 49 5.2
110 11 44 216 314 294.90 138 87 74 56 9.2
125 17 44 214 315 368.00 138 107 95 74 10.7
160 17 44 214 317 588.20 167 137 122 89 21.1
180 17 44 214 318 682.00 192 155 137 105 25.9

For half shell dimensions, refer to Table 2 on p 27

B C

A D Consists of 1 x elbow liner and 2 x half sized shells. Weight shown is for complete product.

Equal Tees

Size Blue A B C Weight


SDR Each
(mm) Code (mm) (mm) (mm) (kg)

63 11 44 221 311 256.50 362 50 43 5.3


90 11 44 222 313 329.90 404 71 61 9.5
110 11 44 222 314 442.40 452 87 74 15.9
125 17 44 220 315 591.50 500 107 95 19.6
160 17 44 220 317 906.90 596 137 122 36.7
180 17 44 220 318 1,094.20 634 155 137 47.2
A

For half shell dimensions, refer to Table 2 on p 27


B C

Consists of 1 x elbow liner and 3 x half sized shells. Weight shown is for complete product.

Note: WIS 4-24-01 Type 1 approved fitting.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

28
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 29

FLUID COMPRESSION FITTINGS


PROTECTA-LINE
Flanged Branch Tees
A

Size Blue
SDR Bolting Each
(mm x PN) Code
B C
90 x DN80 PN16 11 M16 X 8 44 351 313 428.60
110 x DN80 PN16 11 M16 X 8 44 351 314 576.10
125 x DN80 PN16 17 M16 X 8 44 363 315 667.30
160 x DN80 PN16 17 M16 X 8 44 363 317 821.40
180 x DN80 PN16 17 M16 X 8 44 363 318 907.10
D
90 x DN100 PN16 11 M16 X 8 44 352 313 344.30
110 x DN100 PN16 11 M16 X 8 44 352 314 600.60
125 x DN100 PN16 17 M16 X 8 44 364 315 667.30
Consists of 1 x flanged branch tee liner and 2 x half sized shells. 160 x DN100 PN16 17 M16 X 8 44 364 317 844.80
Weight shown is for complete product. Bolt set is not supplied. 180 x DN100 PN16 17 M16 X 8 44 364 318 1,101.40
160 x DN150 PN16 17 M20 X 8 44 365 317 884.70
180 x DN150 PN16 17 M20 X 8 44 365 318 1,126.50

Size Torque A B C D Weight


PCD
(mm x PN) (Nm+/- 10%) (mm) (mm) (mm) (mm) (kg)

90 x DN80 PN16 70 160 404 71 62 200 11.0


110 x DN80 PN16 70 160 448 86 74 200 -
125 x DN80 PN16 70 160 436 108 96 200 19.0
160 x DN80 PN16 70 160 590 138 121 200 -
180 x DN80 PN16 70 160 634 156 142 200 42.5
90 x DN100 PN16 80 180 404 71 62 220 11.9
110 x DN100 PN16 80 180 448 86 74 220 -
125 x DN100 PN16 80 180 500 108 96 220 19.9
160 x DN100 PN16 80 180 590 138 121 220 -
180 x DN100 PN16 80 180 634 156 142 220 41.5
160 x DN150 PN16 120 240 590 138 121 285 -
180 x DN150 PN16 120 240 634 156 142 285 43.9

For half shell dimensions, refer to Table 2 on p 27

Repair Couplers

Size Blue A B C Weight


SDR Each
(mm) Code (mm) (mm) (mm) (kg)

63 11 44 246 311 186.10 126 50 43 1.7


90 11 44 246 313 209.40 177 71 61 3.5
110 11 44 246 314 272.20 203 86 74 6.0
125 17 44 245 315 323.10 236 107 95 7.7
160 17 44 245 317 554.20 269 122 122 12.5
180 17 44 245 318 713.40 319 155 137 20.4
For half shell dimensions, refer to Table 2 on p 27
A

C B

Consists of 1 x repair coupler liner and 2 x


repair coupler sized shells.

NOTE: WIS 4-24-01 Type 1 Approved fitting.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

29
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 30

PROTECTA-LINE FLUID COMPRESSION FITTINGS

Stub Flange Adaptors


A
Size Blue
SDR Bolting Each
(mm x PN) Code

63 x DN50 PN16 11 M16 X 4 44 227 311 119.20


63 x DN80 PN16 11 M16 X 8 44 228 311 154.00
B C 90 x DN80 PN16 11 M16 X 8 44 228 313 156.90
110 x DN100 PN16 11 M16 X 8 44 228 314 174.30
125 x DN100 PN16 17 M16 X 8 44 226 315 244.20
160 x DN150 PN16 17 M20 X 8 44 226 317 305.20
180 x DN150 PN16 17 M20 X 8 44 226 318 370.60

Consists of 1 x stub flange liner, 1 x half Torque A B C Weight *


sized shell, backing ring and gasket. Bolt Size (mm x mm) PCD
(Nm+/- 10%) (mm) (mm) (mm) (kg)
set is not supplied.The information given
for bolting torque values are for metal to 63 x DN50 PN16 60 125 115 50 43 3.1
metal connections. 63 x DN80 PN16 60 125 115 50 43 3.4
90 x DN80 PN16 70 160 124 71 62 6.0
* Weight is inclusive of liner, 1 x half 110 x DN100 PN16 80 180 138 87 75 8.9
sized shell, backing ring and gasket. 125 x DN100 PN16 80 180 138 108 96 10.9
160 x DN150 PN16 120 240 167 138 125 17.9
Drilled to BS EN 1092-1:2007 Table 13. 180 x DN150 PN16 120 240 192 156 142 21.9
For half shell dimensions, refer to Table 2 on p 27

Duck Foot Bends

E Size Blue
SDR Bolting Each
(mm x PN) Code

A D 63 x DN80 PN16 11 M16 x 8 44 384 459 293.20


90 x DN80 PN16 11 M16 x 8 44 384 313 301.20
G B C G
110 x DN80 PN16 11 M16 x 8 44 384 483 338.30
F
125 x DN80 PN16 17 M16 x 8 44 385 484 362.00
160 x DN80 PN16 17 M16 x 8 44 385 486 474.10
180 x DN80 PN16 17 M16 x 8 44 385 487 553.20

Torque Total Fitting A B C D E F G


Size (mm x mm) PCD
(Nm+/- 10%) Weight (kg)* (mm) (mm) (mm) (mm) (mm) (mm) (mm)

63 x DN80 PN16 70 160 9 115 50 43 89 320 135 300


90 x DN80 PN16 70 160 9 124 71 62 89 320 135 300
110 x DN80 PN16 70 160 9.5 138 87 75 - 240 135 300
125 x DN80 PN16 70 160 13.5 138 108 96 - 245 135 300
160 x DN80 PN16 70 160 - 167 138 125 102 370 135 300
180 x DN80 PN16 70 160 16.5 192 156 142 127 420 135 300

Consists of 1 x flanged bend, 1 x half sized shell and gasket. Bolt set is not supplied. The information given for bolting torque values are for metal to metal connections.
Drilled to BS EN 1092-1:2007 Table 13. For half shell dimensions, refer to Table 2 on p 28

Accessories

Weight Code Each


(kg)
Aluminium Wrapping Tape 0.5 44 996 008 19.65 Hydraulic pump available for hire through
the following outlets: MCA Hire Services
Hydraulic Pump 12.0 44 996 009 863.40
(www.mcahire.com) and Plant & Site
Protecta-Line hydraulic fluid (5 litres) 5.0 44 996 010 64.50 Services Ltd (www.psshire.com)

Note: WIS 4-24-01 Type 1 approved fitting.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

30
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 31

ELECTROFUSION FITTINGS
PROTECTA-LINE
Couplers - 39.5 Volt

Cooling
Size A C h Z Weight Fusion
Code Each Time
(mm) (mm) (mm) (mm) (mm) (kg) Time (sec)
(mins)
90 PL 100 313 22.80 119 127 74 3 0.60 120 8
110 PL 100 314 36.65 141.5 135 82 3 0.80 160 10
125 PL 100 315 41.35 158.5 147 92 3 1.10 180 12
160 PL 100 317 65.80 198 164 113 3 1.60 300 14
180 PL 100 318 77.30 221 167 123 3 2.10 400 16
225 PL 100 320 123.50 278 220 145 8 3.90 500 18
250 PL 100 321 180.90 310 224 155 8 5.10 600 20
280 PL 100 322 281.10 341 256 175 8 7.10 700 28
315 PL 100 323 298.30 389 291 192 8 9.50 980 30
355 PL 100 324* 515.70 405 295 218 4 9.00 980 28

*SDR17 only

Reducers - 39.5 Volt

Size Fusion Cooling


A C L1 Weight h Z
(mm) Code Each Time Time
(mm) (mm) (mm) (kg) (mm) (mm)
d x d1 (sec) (mins)
110 x 90 PL 402 483 43.75 136 189 72 85.00 83 32 0.9 200
125 x 90 PL 402 484 63.60 155 210 67 90.00 91 53 1.2 180
125 x 110 PL 402 493 70.00 156 201 73.5 95.00 93 32.5 1.3 240
160 x 110 PL 402 495 107.60 195 254 72 101.00 114 81 2.2 300
180 x 125 PL 402 505 116.90 214 276 83 110.00 124 83 2.6 300

h
d1 d A

L1 L2

45 Elbows - 39.5 Volt

Fusion Cooling
Size A C Z Weight
Code Each Time Time
(mm) (mm) (mm) (mm) (kg)
(sec) (mins)
90 PL 105 313 61.30 115 89 20 0.80 120 10
110 PL 105 314 89.90 136 97 27 1.00 160 10
125 PL 105 315 100.40 156 105 30 1.40 180 12
160 PL 105 317 186.10 198 120 36 2.60 300 16
180 PL 105 318 228.30 223 128 40 3.40 400 18

C
Z

A
When made in accordance with GPS PE Pipe Systems' recommended procedures, butt-fusion and
electrofusion joints of the Protecta-Line system have been independently shown to meet the
requirements of WIS 4-32-19 without any need for subsequent wrapping. This does not exempt
installers from local regulations and the local Water Company preferences must be adhered to.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

31
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 32

PROTECTA-LINE ELECTROFUSION FITTINGS

90 Elbows - 39.5 Volt

Fusion Cooling
Size A C Z Weight
Code Each Time Time
(mm) (mm) (mm) (mm) (kg)
(sec) (mins)
90 PL 104 313 61.20 114.5 118 49 0.90 120 10
110 PL 104 314 89.90 137 130 60 1.30 160 10
125 PL 104 315 100.40 155.5 143 67 1.80 180 12
160 PL 104 317 186.10 199 171 87 2.60 300 16
180 PL 104 317 228.30 222 185 98 4.40 400 18

C
Z

Equal Tees - 39.5 Volt

Fusion Cooling
Size B Z1 Weight
Code Each Time Time
(mm) (mm) (mm) (kg)
(sec) (mins)
90 PL 408 313 160.40 211 83.5 150 120 10
110 PL 408 314 202.90 240 108 171 160 10
125 PL 408 315 233.90 280 119 177 240 12
160 PL 408 317 322.30 314 150 227 260 14
180 PL 408 318 335.90 365 161 225 440 20

Supplied factory-wrapped to ensure complete barrier performance.

Z2

Z1
B

When made in accordance with GPS PE Pipe Systems' recommended procedures, butt-fusion and electrofusion joints of the Protecta-Line
system have been independently shown to meet the requirements of WIS 4-32-19 without any need for subsequent wrapping.
This does not exempt installers from local regulations and the local Water Company preferences must be adhered to.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

32
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 33

ELECTROFUSION FITTINGS
PROTECTA-LINE
Flanged Tees - 39.5 Volt

Fusion Cooling
Size B Z Weight
Code Each Time Time
(mm x PN) (mm) (mm) (kg)
(sec) (mins)
90 x 80 PN16 PL 301 313 238.10 211 296 2.60 12 10
110 x 80 PN16 PL 301 314 364.10 240 515 3.90 160 10
125 x 80 PN16 PL 301 315 395.10 280 532 4.70 240 12
160 x 80 PN16 PL 301 317 520.20 314 615 6.70 260 14
180 x 80 PN16 PL 301 318 623.90 365 834 7.90 440 20
90 x 100 PN16 PL 302 313 342.40 211 534 3.20 100 10
110 x 100 PN16 PL 302 314 296.70 240 310 3.90 160 10
125 x 100 PN16 PL 302 315 336.30 280 301 4.30 240 12
160 x 100 PN16 PL 302 317 550.80 314 650 7.60 260 14
Z
180 x 100 PN16 PL 302 318 585.50 365 671 9.20 440 20
160 x 150 PN16 PL 303 317 490.10 314 410 8.50 260 14
180 x 150 PN16 PL 303 318 544.20 365 415 5.20 440 20

Supplied factory-wrapped to ensure complete barrier performance.


B

Flange Adaptor Kits


Adaptor Kit comprises of:-
1 x Stub Flange Size Fusion Time Cooling Time
SDR Code Each
1 X Coupler (mm x PN) (sec) (mins)
1 x Gasket (representation) 90 x 80 PN16 11 PL 251 313 86.30 120 8
1 x Backing Ring 110 x 100 PN16 11 PL 251 314 91.50 160 10
125 x 100 PN16 17 PL 250 315 101.70 180 12
160 x 150 PN16 17 PL 250 317 155.00 300 14
180 x 150 PN16 17 PL 250 318 180.80 400 16
225 x 200 PN16 17 PL 250 320 270.60 500 18
250 x 200 PN16 17 PL 250 534 P.O.A. 600 20
250 x 250 PN16 17 PL 250 321 451.60 600 20
280 x 250 PN16 17 PL 250 542 530.90 700 28
315 x 250 PN16 17 PL 250 543 P.O.A. 980 30
315 x 300 PN16 17 PL 250 323 630.30 980 30
355 x 300 PN16 17 PL 250 547 P.O.A. 980 28
355 x 350 PN16 17 PL 250 324 1,539.70 980 28

When made in accordance with GPS PE Pipe Systems' recommended procedures, butt-fusion and electrofusion joints of the Protecta-Line
system have been independently shown to meet the requirements of WIS 4-32-19 without any need for subsequent wrapping.
This does not exempt installers from local regulations and the local Water Company preferences must be adhered to.

Only Protecta-Line fittings shall be used with Protecta-Line pipe. The use of alternative fittings will have the following effects on your Protecta-Line system:
Invalidation of WRAS approval and manufacturers system performance warranty.
Compromised permeation resistance (causing non-compliance with WIS 4-32-19 and possible risks to health).
Danger of pipe-layer delamination, compromising system performance integrity and risking pipe bursts.
It would be illegal to install non-WRAS approved fittings. WIS 4-32-19
KM 514626

33
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 34

PUSH-FAST
A SPIGOT AND SOCKET JOINTING SYSTEM WITH PROVEN END LOAD PERFORMANCE

PE100 SDR11 PN16 PE100 SDR11 PN10 PE100 SDR17 PN10


Product/Shape
90mm 110mm 125mm 160mm 180mm 225mm 250mm 90mm 110mm 125mm 160mm 180mm 225mm 250mm
Pipe (Spigot & Socket)
90 Elbow (Spigot & Socket)
90 Elbow (Double Socket)
45 Elbow (Spigot & Socket)
45 Elbow (Double Socket)
22.5 Elbow (Spigot & Socket)
22.5 Elbow (Double Socket)
90 Bend (Spigot & Socket)
90 Bend (Double Socket)
45 Bend (Spigot & Socket)
45 Bend (Double Socket)
22.5 Bend (Spigot & Socket)
22.5 Bend (Double Socket)
Coupler (Double Socket)
Repair Slip Coupler
Equal Tee (Triple Socket)
End Cap
X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90
X 110 X 110 X 110 X 110 X 110 X 110 X 110 X 110 X 110 X 110
Reducer X125 X 125 X125 X125 X125 X 125 X125 X125
X 160 X 160 X 160 X 160 X 160 X 160
X 180 X 180 X 180 X 180
X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90 X 90 X9
X 110 X 110 X 110 X 110 X 110 X 110 X 110 X 110 X 110 X 110
Reduced Tee X125 X 125 X125 X125 X125 X 125 X125 X125
X 160 X 160 X 160 X 160 X 160 X 160
X 180 X 180 X 180 X 180
X 225 X 225
X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80
X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100
Flanged Branch Tee X 125 X 125 X 125 X 125 X 125 X 125 X 125 X 125 X 125 X 125
X 150 X 150 X 150 X 150 X 150 X 150 X 150 X 150
X 200 X 200 X 200 X 200
X 250 X 250 X 250 X 250
X 80 X 100 X 100 X 150 X 150 X 200 X 250 X 80 X 100 X 100 X 150 X 150 X 200 X 250
Flanged Socket (Flanged End & Socket)
X 125 X 125
90 Elbow (Flanged End & Socket) X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80
X 100 X 100 X 100 X 100
X 150 X 150
Spare Seal and Grip Ring Kit
Lubricant*:
400 gm Spray
500 gm Gel

* Safety data sheets are available on request. Please contact our Sales Office for pricing information.

* Safety data sheets are available upon request. Please contact our Sales Office for pricing information.

34
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 35

ELECTROFUSION FITTINGS
DURAFUSE
Couplers - 39.5 Volt

Size Black Yellow


SDR Each
(mm) Code Code

20 11 40 100 306 58 100 306 8.35


25 11 40 100 307 58 100 307 8.35
32 11 40 100 308 58 100 308 8.35
40 11 40 100 309 58 100 309 12.35
20-63mm
50 11 40 100 310 - 11.90
63 11 40 100 311 58 100 311 15.50
75 11 40 100 312 58 100 312 23.45
90 11 40 100 313 58 100 313 22.80
110 11 40 100 314 58 100 314 36.65
125 11 40 100 315 58 100 315 41.35
140 11 40 100 316 58 100 316 60.10
160 11 40 100 317 58 100 317 65.80
75-200mm 180 11 40 100 318 58 100 318 77.30
200 11 40 100 319 58 100 319 108.90
225 11 40 100 320 58 100 320 123.50
250 11 40 100 321 58 100 321 180.90
280 11 40 100 322 58 100 322 281.10
315 11 40 100 323 58 100 323 298.30
355* 17/17.6 40 100 324 - 515.70
400* 17/17.6 40 100 325 - 605.00
225-400mm * Not available as 16 Bar - SDR17/17.6 only

25-63mm PE80 yellow coupler dimensions may differ from those detailed below.

Black Yellow
Size A B h Z
SDR Total (kg) Fusion Time Cooling Time Fusion Time Cooling Time
(mm) (mm) (mm) (mm) (mm)
(Sec) (mins) (Sec) (mins)
20 11 30 61 33.0 2 0.04 25 5 25 5
25 11 37 78 36.0 2 0.06 30 7 26 6
32 11 44 81 39.0 2 0.07 26 7 39 6
40 11 52.6 88 43.0 2 0.09 46 7 47 10
50 11 65.3 98 49.5 2 0.14 42 7 65 9
63 11 81.5 110 57.5 2 0.23 50 7 84 8
75 11 95.5 118 66.5 3 0.34 75 6 75 6
90 11 119 127 74.0 3 0.60 120 8 120 8
110 11 141.5 135 82.0 3 0.80 160 10 160 10
125 11 158.5 147 92.0 3 1.10 180 12 180 12
140 11 175 154 103.0 3 1.30 240 12 240 12
160 11 198 164 113.0 3 1.60 300 14 300 14
180 11 221 167 123.0 3 2.10 400 16 400 16
200 11 246 175 137.0 3 2.70 460 18 460 18
225 11 278 220 145.0 8 3.90 500 18 500 18
250 11 310 224 155.0 8 5.10 600 20 600 20
280 11 341 256 175.0 8 7.10 700 28 700 28
315 11 389 291 192.0 8 9.50 980 30 980 30
355* 17/17.6 405 295 218.0 4 9.00 980 28 980 28
400* 17/17.6 458 335 239.0 4 12.08 980 28 980 28

35
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 36

DURAFUSE ELECTROFUSION FITTINGS

Couplers - 79 Volt

Size Black Yellow


SDR Each
(mm) Code Code

315 11 - 58 101 323 298.30


355* 17/17.6 40 101 324 58 101 324 515.70
400* 17/17.6 40 101 325 58 101 325 605.00
450* 17/17.6 40 101 326 - 1,497.50
500* 17/17.6 40 101 327 - 1,632.40

SDR11 Fusion Cooling


Size A B h Z
SDR Weight Time Time
(mm) (mm) (mm) (mm) (mm) (kg) (Sec) (mins)
315 11 389 291 192 8 10.1 460 20
355* 17/17.6 405 295 218 4 9.00 500 22
400* 17/17.6 458 335 239 4 12.08 600 22
450* 17/17.6 519 355 280 4 15.00 700 22
500* 17/17.6 576 355 308 4 18.00 900 30

* Not available as 16 Bar - SDR17/17.6 only

Couplers with Excess Flow Limiters - 39.5 Volt (gas applications only)

h Fusion Cooling
Size SDR 11 A B h Weight
Each Time Time
A (mm) Yellow Code (mm) (mm) (mm) (kg)
(sec) (mins)
32 58 102 308 65.80 44 81 0.086 0.073 39 6
B
PE80 Yellow only.

Couplers with Excess Flow Limiters - 39.5 Volt (gas applications only)

h Fusion Cooling
Size SDR 11 A B h Weight
d1 d A Each Time Time
(mm) Yellow Code (mm) (mm) (mm) (kg)
(sec) (mins)
B
32 x 25 58 102 409 64.10 44.5 83.5 38 0.073 24 6
PE80 Yellow only.

36
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 37

ELECTROFUSION FITTINGS
DURAFUSE
Reducers - 39.5 Volt
Size SDR11 SDR11
(mm) Black Yellow Each
d x d1 Code Code
25 x 20 40 402 404 58 402 404 8.35
32 x 20 40 402 405 58 402 405 8.35
32 x 25 40 402 409 58 402 409 8.35
40 x 32 40 402 413 - 17.10
63 x 32 40 402 415 58 402 415 21.45
63 x 40 40 402 430 - 21.45
63 x 50 40 402 444 58 402 444 25.10
B 75 x 63* - 58 402 445 30.10
90 x 63 40 402 459 58 402 459 31.75
110 x 90 40 402 483 58 402 483 43.75
125 x 63* 40 402 461 - 87.20
h
125 x 90 40 402 484 58 402 484 63.60
d1 d A
125 x 110 40 402 493 58 402 493 70.00
160 x 110 40 402 495 58 402 495 107.60
L1 L2 180 x 125 40 402 505 58 402 505 116.90

Z
Size Fusion Cooling
A B L1 L2 h Z Weight
(mm) Time Time
(mm) (mm) (mm) (mm) (mm) (mm) (kg)
d x d1 (Sec) (mins)
25 x 20 37 80 35.5 37 36 7.5 0.05 26 4
32 x 20 44.5 83 36.5 40.5 39 5.5 0.05 22 4
32 x 25 44.5 84 38 41 38 4.5 0.07 24 6
40 x 32 56 112 47 53 46 11.5 0.12 36 4
63 x 32 81 121 41 59 56 19 0.18 60 6
63 x 40 81 129 48 59 56 21.5 0.21 65 6
63 x 50 79 131 52 61 59.5 18 0.22 70 6
75 x 63* 95 119 39 47.5 62 32 0.40 - -
90 x 63 113 175 54.5 80 73.5 40.5 0.60 100 10
110 x 90 136 189 72 85 83 32 0.90 200 12
125 x 63* 155 191 39 78 87 58 1.0 - -
125 x 90 155 210 67 90 91 53 1.2 180 14
125 x 110 156 201 73.5 95 93 32.5 1.3 240 14
160 x 110 195 254 72 101 114 81 2.2 300 14
180 x 125 214 276 83 110 124 83 2.6 300 16
* Product is kit format comprising of 2 x Electrofusion couplers and 1 x Long Spigot reducer.

37
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:07 Page 38

DURAFUSE ELECTROFUSION FITTINGS

32mm Top Loading Tapping Tees - 39.5 Volt

Size SDR11
(mm) Black Each
d x d1 Code
A
63 x 32 40 411 415 37.95
d1 75 x 32 40 411 416 37.95
Z2 90 x 32 40 411 417 37.95
d
110 x 32 40 411 418 37.95
Z1 125 x 32 40 411 419 37.95
B
140 x 32 40 411 420 37.95
Product supplied may vary in 160 x 32 40 411 421 37.95
design to that shown above. 180 x 32 40 411 422 37.95
Supplied complete with
12mm hexagon drive cutter. 200 x 32 40 411 423 37.95
225-315 x 32 40 411 427 37.95

Size Fusion Cooling


A B Z1 Z2 Weight
(mm) Time Time
(mm) (mm) (mm) (mm) (kg)
d x d1 (Sec) (mins)
63 x 32 98 109 79 60 0.29 70 4
75 x 32 98 109 79 66 0.29 70 4
90 x 32 98 109 79 72 0.30 70 4
110 x 32 98 109 79 84 0.30 70 4
125 x 32 98 109 79 91 0.30 70 4
140 x 32 98 109 79 99 0.30 70 4
160 x 32 98 109 79 109 0.30 70 4
180 x 32 98 109 79 119 0.31 70 4
200 x 32 138 109 94 129 0.45 102 10
225-315 x 32 138 109 94 141-186 0.45 125 10

PE80 32mm Top Loading Ranged Tapping Tees - 39.5 Volt (gas applications only)
Size SDR11
(mm) Yellow Each
d x d1 Code
A 63/2" x 32 58 411 415 37.95
90/3" x 32 58 411 417 37.95
110-140/4" x 32 58 411 419 37.95
160213/6''-8'' x 32 58 411 422 37.95
B 225-315 x 32 58 411 427 37.95

Supplied complete with


12mm hexagon drive cutter. Size Fusion Cooling
A B Z1 Z2 Weight
(mm) Time Time
(mm) (mm) (mm) (mm) (kg)
d x d1 (Sec) (mins)
63/2" x 32 98 109 79 58 0.28 70 4
d1 90/3" x 32 98 109 79 71 0.29 70 4
Z2
d 110-140/4" x 32 98 109 79 81-96 0.29 70 4
160-213/6''-8'' x 32 98 109 79 106-133 0.31 70 4
Z1
225-315 x 32 138 109 96 141-186 0.47 70 4

38
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 39

ELECTROFUSION FITTINGS
DURAFUSE
Inno 3 Under Clamp Tapping Tees - 39.5 Volt
Size SDR11
(mm) Black Each
d x d2 Code
90 x 32 40 433 417 57.70
125 x 32 40 433 419 57.70
180 x 32 40 433 422 57.70

Size Fusion Cooling


A B Z1 Z2 Weight Clamp
(mm) Time Time
(mm) (mm) (mm) (mm) (kg) Type
d x d1 (Sec) (mins)
90 x 32 140 108 125 65 0.59 B 70 10
125 x 32 140 108 135 83 0.61 B 70 10
180 x 32 140 108 135 110 0.64 B 70 10
Strap
under
clamp

TYPE B
Strap Clamp

Supplied complete with 10mm


hexagon drive cutter.

NOTE: These fittings have 4mm terminal pins, 4mm-4.7mm adaptors are required - order code 53EW0002

PE80 63mm Top Loading Tapping Tees - 39.5 Volt

Size SDR11 SDR11


(mm) Black Yellow Each
d x d1 Code Code
A
90 x 63 50 404 459 58 404 459 90.50
d1 110 x 63 50 404 460 58 404 460 90.50
Z2
d 125 x 63 50 404 461 58 404 461 90.50
160 x 63 50 404 463 - 90.50
B Z1
180 x 63 50 404 464 58 404 464 90.50
200 x 63 50 404 465 - 90.50
Supplied complete with 12mm
hexagon drive cutter. 225 x 63 50 404 466 - 90.50
250 x 63 50 404 467 58 404 467 90.50
315 x 63 50 404 469 58 404 469 90.50

Size Fusion Cooling


A B Z1 Z1 Weight
(mm) Time Time
(mm) (mm) (mm) (mm) (kg)
d x d1 (Sec) (mins)
90 x 63 184 160 116 102 1.25 46 6
110 x 63 184 160 116 112 1.25 46 6
125 x 63 184 160 116 120 1.25 46 6
160 x 63 184 160 116 137 1.25 46 6
180 x 63 184 160 116 147 1.25 46 6
200 x 63 184 160 116 157 1.25 46 6
225 x 63 184 160 116 170 1.25 46 6
250 x 63 184 160 116 182 1.27 46 6
315 x 63 184 160 116 218 1.28 46 6

39
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 40

DURAFUSE ELECTROFUSION FITTINGS

PE80 63mm Top Loading Branching Saddles - 39.5 Volt

Fusion Cooling
Size (mm) SDR 11 A B Z Weight
Each Time Time
d1 x d2 Black Code (mm) (mm) (mm) (kg)
(sec) (mins)
63 x 63 50 406 311 91.80 93 138 125 0.3 46 3
90 x 63 50 406 459 91.80 98 160 143 0.3 46 3
110 x 63 50 406 460 91.80 97 160 152 0.3 46 3

d1

Z
B
d

PE100 Under Clamp Branching Saddles - 39.5 Volt

Fusion Cooling
Size (mm) SDR 11 L1 Weight Clamp
Each Time Time
d1 x d2 Black Code (mm) (kg) Type
(sec) (mins)
40 x 20 40 415 377 91.80 50 0.16 A 26 5
50 x 32 40 415 414 91.80 59 0.23 A 66 5
63 x 32 40 416 415 91.80 60 0.25 B 66 5
63 x 40 40 416 430 91.80 59 0.23 B 66 5
D2
75 x 40 40 416 431 91.80 64 0.26 B 97 6
75 x 50 40 416 445 91.80 64 0.27 B 97 6
90 x 32 40 416 417 91.80 64 0.28 B 99 8
L1 90 x 40 40 416 432 91.80 64 0.30 B 99 8
Strap
90 x 50 40 416 446 91.80 64 0.31 B 99 8
under
clamp 90 x 63 40 416 459 91.80 85 0.37 B 99 8
110 x 32 40 416 418 91.80 64 0.30 B 99 8
D1 110 x 40 40 416 433 91.80 64 0.32 B 99 8
PE Underclamp 110 x 50 40 416 447 91.80 64 0.34 B 99 8
110 x 63 40 416 460 91.80 85 0.4 B 99 8
TYPE A
Moulded Clamp
TYPE B 125 x 32 40 416 419 91.80 64 0.31 B 99 8
Strap Clamp
125 x 40 40 416 434 91.80 64 0.33 B 99 8
125 x 50 40 416 448 91.80 64 0.35 B 99 8
125 x 63 40 416 461 91.80 85 0.41 B 99 8
160 x 32 40 416 421 91.80 64 0.32 B 99 8
160 x 50 40 416 450 91.80 64 0.36 B 99 8
160 x 63 40 416 463 91.80 85 0.42 B 99 8
180 x 63 40 416 464 91.80 70 0.45 B 99 8
200 x 32 40 416 423 91.80 64 0.33 B 99 8
200 x 40 40 416 438 91.80 64 0.35 B 99 8
200 x 63 40 416 465 91.80 85 0.43 B 99 8

40
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 41

ELECTROFUSION FITTINGS
DURAFUSE
PE80 Top Loading Purge Saddles - 39.5 Volt

Fusion Cooling
Size SDR11 A B Weight
Each Time Time
(mm) Yellow Code (mm) (mm) (kg)
(sec) (mins)
A
63 58 417 311 56.30 100 118 0.27 46 3
90 58 417 313 56.30 100 118 0.29 46 3
125 58 417 315 56.30 100 118 0.29 46 3
180 58 417 318 56.30 100 118 0.31 46 3
B

Available in PE80 Yellow only.

PE80 Top Loading High Velocity Purge Saddles - 39.5 Volt

Fusion Cooling
Size SDR 11 SDR 17.6 A B Weight
Each Time Time
(mm) Yellow Code Yellow Code (mm) (mm) (kg)
(sec) (mins)
180 58 422 318 - 187.40 102 159 2.75 46 3
250 - 58 422 321 187.40 102 159 2.75 46 3
315 - 58 422 323 187.40 102 159 2.75 46 3
355 - 58 422 324 187.40 100 158 2.75 46 3
400 - 58 422 325 187.40 100 158 2.75 46 3

Available in PE80 Yellow only.


A

41
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 42

DURAFUSE ELECTROFUSION FITTINGS

90 Elbows - 39.5 Volt

C SDR11 SDR11
Size
Z Black Yellow Each
(mm)
Code Code
25 40 104 307 58 104 307 18.30
A 32 40 104 308 58 104 308 18.30
40 40 104 309 - 27.15
50 40 104 310 - 36.65
63 40 104 311 58 104 311 39.90
75 40 104 312 - 57.70
90 40 104 313 58 104 313 61.20
110 40 104 314 58 104 314 89.90
125 40 104 315 58 104 315 100.40
160 40 104 317 - 186.10
180 40 104 318 58 104 318 228.30
25-63mm PE80 yellow coupler dimensions may differ
from those detailed below.

Black Yellow
Size A C Z Weight
Fusion Time Cooling Time Fusion Time Cooling Time
(mm) (mm) (mm) (mm) (kg)
(Sec) (mins) (Sec) (mins)
25 36 53.5 16 0.06 33 7 26 6
32 43 58.2 19 0.08 34 7 39 5
40 53 68.9 23 0.13 50 7 - -
50 65.3 74.5 27 0.20 42 7 60 9
63 81.5 88 35 0.35 50 7 65 7
75 96 95 40 0.50 100 8 100 8
90 114.5 118 49 0.90 120 10 120 10
110 137 130 60 1.30 160 10 160 10
125 155.5 143 67 1.80 180 12 180 12
160 199 171 87 2.60 300 16 300 16
180 222 185 98 4.40 400 18 400 18

45 Elbows - 39.5 Volt

C SDR11 SDR11
Size
Z
Black Yellow Each
(mm)
Code Code
25 40 105 307 58 105 307 18.30
32 40 105 308 58 105 308 18.30
A
40 40 105 309 - 27.15
50 40 105 310 - 32.70
63 40 105 311 58 105 311 39.60
75 40 105 312 - 53.70
90 40 105 313 58 105 313 61.30
110 40 105 314 - 89.90
125 40 105 315 58 105 315 100.40
160 40 105 317 - 186.10
180 40 105 318 58 105 318 228.30

Size A C Z Weight Fusion Time Cooling Time


(mm) (mm) (mm) (mm) (kg) (Sec) (mins)

25 35 45 7 0.05 26 5
32 42 48 8 0.06 38 7
40 53 55 10 0.11 46 9
50 66 57 12 0.17 55 7
63 81 65 15 0.24 60 9
75 96 73 18 0.50 100 8
90 114.5 89 20 0.80 120 10
110 136 97 27 1.00 160 10
125 156 105 30 1.40 180 12
160 198 120 36 2.60 300 16
180 223 128 40 3.40 400 18

42
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 43

ELECTROFUSION FITTINGS
DURAFUSE
Equal Tees - 39.5 Volt

SDR11 SDR11
Size
Black Yellow Each
(mm)
Z2
Code Code
20 - 58 408 306 16.50
25 40 408 307 58 408 307 16.50
32 40 408 308 58 408 308 16.50
40 40 408 309 - 27.50
Z1 50 40 408 310 - 35.80
63 40 408 311 58 408 311 39.05
B
75 40 408 312 58 408 312 59.10
90 40 408 313 58 408 313 71.30
110 40 408 314 - 106.30
125 40 408 315 58 408 315 137.30
160 40 408 317 - 225.70
180 40 408 318 58 408 318 230.90

Size B Z1 Z1 Weight Fusion Time Cooling Time


(mm) (mm) (mm) (mm) (kg) (Sec) (mins)

20 75 15 62 0.04 25 4
25 99 22 68 0.07 39 5
32 110 30 77 0.09 49 6
40 118 32 89 0.16 47 7
50 137 43 102 0.22 60 9
63 169 58 118 0.39 70 10
75 171 61 124 1.00 80 8
90 211 83.5 150 1.10 120 10
110 240 107.5 171 1.70 160 10
125 280 118.5 177 2.30 240 12
160 314 150 227 4.40 260 14
180 365 161 225 5.80 440 20

Flanged Branch Tees - 39.5 Volt

Fusion Cooling
Size SDR 11 SDR 11 B Z Weight
Each Time Time
(mm) Black Code Yellow Code (mm) (mm) (kg)
(sec) (mins)
90 x 80 PN16 40 301 313 58 301 313 162.40 219 296 2.6 120 10
125 x 80 PN16 40 301 315 58 301 315 310.00 264 532 4.7 240 12
180 x 80 PN16 40 301 318 58 301 318 411.60 383 834 7.9 440 20
90 x 100 PN16 40 302 313 58 302 313 211.05 219 534 3.2 100 10
125 x 100 PN16 40 302 315 58 302 315 298.25 264 301 4.3 240 12
180 x 100 PN16 40 302 318 58 302 318 411.60 383 671 9.2 440 20
180 x 150 PN16 40 303 318 58 303 318 404.20 383 415 5.2 440 20

Z Dimension Z is an approximate value, based on the dimensions of the component parts. The nature of
the fabrication process is such that the final dimension may be slightly less than the Z value quoted.
Drilled to BS EN 1092-1:2007 Table 13.

43
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 44

DURAFUSE ELECTROFUSION FITTINGS

End Caps
Black Yellow
Size SDR 11 SDR 11 Z L Weight
Each Fusion Cooling Fusion Cooling
(mm) Black Code Yellow Code (mm) (mm) (kg)
Time (sec) Time (mins) Time (sec) Time (mins)
20 - 58 403 306 15.90 89 28 0.05 25 5 25 5
25 40 403 307 58 403 307 15.90 104 28 0.06 30 7 26 6
32 40 403 308 58 403 308 16.85 96 15 0.10 26 7 39 6
50 40 403 310 58 403 310 24.55 140 42 0.19 42 7 65 9
63 40 403 311 58 403 311 28.15 142 31 0.31 50 7 84 8
L
90 40 403 313 58 403 313 46.45 189 62 0.90 120 8 120 8
125 40 403 315 58 403 315 74.60 230 83 1.80 180 12 180 12
160 40 403 317 58 403 317 86.20 262 98 2.90 300 14 300 14
180 40 403 318 58 403 318 142.60 285 118 3.92 400 16 400 16
250 - 58 403 321 341.80 330 195 5.25 600 20 600 20
315 - 58 403 323 472.30 507 216 18.20 980 30 980 30

Duck Foot Bends

SDR
Size (mm) SDR 11 A B C x C1 D x D1
Each Weight
d1 x d2 Black Code (mm) (mm) (mm) (mm)
(kg)
63 x 80 PN16 40 384 459 341.80 230 270 200 x 230 160 x 180 4.07
90 x 80 PN16 40 384 313 344.30 200 270 200 x 230 160 x 180 3.98
125 x 80 PN16 40 384 484 347.00 250 270 200 x 230 160 x 180 4.74
180 x 80 PN16 40 384 487 481.50 490 270 200 x 230 160 x 180 8.12

Kit comprises of:- Example of 63 x 80 PN16


1 x Base
1 x Electrofusion Tee
1 x Pupped Full Faced Stub Flange
assembly (0.5m pup approx.)
1 x Reducer/expander to suit input size
Bolts NOT included
Example of 180 x 80 PN16 Base dimensions
Other sizes made to order upon request subject to
minimum order values/quantities.
Available in kit form only.
D C

D1

C1

Electrofusion Wipes
Code per tub

Electrofusion Iso-Propyl Alcohol Wipes (100%) (100 per tub) 53 996 603 24.45

Complies with WIS 4-32-08

Safety data sheet available upon request

44
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 45

ELECTROFUSION TRANSITION FITTINGS


DURAFUSE
Transition Couplers Black PE/Brass Female BSP taper - 39.5 Volt

Fusion Cooling
Size SDR 11 B C Weight
Each Time Time
(mm x inch) Black Code (mm) (mm) (kg)
(sec) (mins)
25 x 3 4 40 394 307 35.10 98 34 0.16 28 5
32 x 1 40 394 308 52.40 106 41 0.25 36 3
40 x 11 4 40 394 309 55.70 114 50 0.38 40 5
50 x 112 40 394 310 56.70 128 57 0.84 55 7
63 x 112 40 394 628 84.00 141 67 1.10 76 5
63 x 2 40 394 311 92.40 141 67 0.90 76 5

Available in PE100 Black only


C

Transition Couplers Black PE/Brass Male BSP taper - 39.5 Volt

Fusion Cooling
Size SDR 11 B C Weight
Each Time Time
(mm x inch) Black Code (mm) (mm) (kg)
(sec) (mins)
25 x 3 4 40 395 307 35.10 98 34 0.28 28 5
32 x 1 40 395 308 43.10 106 41 0.26 36 3
40 x 11 4 40 395 309 56.40 118 50 0.40 40 5
50 x 112 40 395 310 56.70 128 67 1.07 55 7
63 x 112 40 395 628 79.90 141 67 0.88 76 5
63 x 2 40 395 311 83.20 150 67 1.03 76 5

Available in PE100 Black only


C

90 Transition Elbows Black PE/Brass Female Taper - 39.5 Volt

Fusion Cooling
Size SDR 11 B C Weight
Each Time Time
(mm x inch) Black Code (mm) (mm) (kg)
(sec) (mins)
25 x 3 4 40 396 307 40.90 77 34 0.19 26 4
32 x 1 40 396 308 46.80 84 41 0.27 34 4
40 x 11 4 40 396 309 63.80 99 50 0.42 50 6
50 x 112 40 396 310 66.80 109 57 0.90 60 5
63 x 112 40 396 628 52.40 121 67 1.24 90 6
63 x 2 40 396 311 63.60 130 67 1.04 90 6

Available in PE100 Black only


C

NOTE: Not approved for gas use

45
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 46

DURAFUSE ELECTROFUSION TRANSITION FITTINGS

90 Transition Elbows Black PE/Brass Male Taper - 39.5 Volt

Fusion Cooling
Size SDR 11 B C Weight
Each Time Time
(mm x inch) Black Code (mm) (mm) (kg)
(sec) (mins)
25 x 3 4 40 397 307 40.90 85 34 0.31 26 4
32 x 1 40 397 308 46.80 88 41 0.38 34 4
40 x 11 4 40 397 309 63.80 107 50 0.44 50 6
50 x 112 40 397 310 66.80 114 67 1.13 60 5
63 x 112 40 397 628 85.30 126 67 1.12 90 6
63 x 2 40 397 311 91.20 130 67 1.17 90 6

C Available in PE100 Black only

45 Transition Elbows Black PE/Brass Female Taper - 39.5 Volt

Fusion Cooling
Size SDR 11 B C Weight
Each Time Time
(mm x inch) Black Code (mm) (mm) (kg)
(sec) (mins)
25 x 3 4 40 398 307 35.90 63 34 0.18 26 4
32 x 1 40 398 308 36.20 73 41 0.27 34 4
40 x 11 4 40 398 309 60.90 82 50 0.42 50 6
50 x 112 40 398 310 69.50 92 57 0.90 60 5
63 x 112 40 398 628 87.80 100 67 1.05 90 6
63 x 2 40 398 311 85.80 100 67 0.85 90 6

Available in PE100 Black only


C

45 Transition Elbows Black PE/Brass Male Taper - 39.5 Volt

Fusion Cooling
Size SDR 11 B C Weight
Each Time Time
(mm x inch) Black Code (mm) (mm) (kg)
(sec) (mins)
25 x 3 4 40 399 307 35.90 76 34 0.30 26 4
32 x 1 40 399 308 36.20 77 41 0.26 34 4
40 x 11 4 40 399 309 60.90 90 50 0.41 50 6
50 x 112 40 399 310 69.50 97 67 1.10 60 5
63 x 112 40 399 628 87.80 105 67 0.93 90 6
63 x 2 40 399 311 85.80 109 67 0.98 90 6

Available in PE100 Black only


C

NOTE: Not approved for gas use

46
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 47

ELECTROFUSION FITTINGS
FRIALEN
Large Diameter Electrofusion Couplers
Fusion and
Size Black A B C Weight
SDR Each cooling times
(mm) Code (mm) (mm) (mm) (kg)
(secs)
355 11 FL 615 074 1,002.80 450 300 225 16.70 use bar code
400 11 FL 615 075 1,227.40 500 320 250 20.80 use bar code
450 11 FL 615 076 1,657.90 560 340 280 30.00 use bar code
500 11 FL 615 124 1,786.60 630 360 315 39.80 use bar code
560 11 FL 616 312 3,727.80 715 380 358 56.40 use bar code
630 11 FL 616 269 4,010.20 810 420 405 80.60 use bar code
560 17 FL 615 706 1,971.90 630 380 315 24.80 use bar code
C 630 17 FL 615 726 2,298.90 710 420 355 36.80 use bar code
710 17 FL 615 994 2,823.10 800 460 400 48.60 use bar code
A 800 17 FL 616 290 5,983.10 900 500 450 65.90 use bar code

Black only - 4.0mm Terminal Pins


Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)
B

Electrofusion Reducers
Fusion and
Size (mm) SDR 11 A B D1 t1 t2 Weight
Each cooling times
AxD Black Code (mm) (mm) (mm) (mm) (mm) (kg)
(secs)
40 x 20 FL 615 387 22.70 54 98 32 30 43 0.08 use bar code
50 x 20 FL 612 069 24.45 68 110 32 37 49 0.13 use bar code
50 x 32 FL 612 070 24.75 68 110 45 39 49 0.14 use bar code
50 x 40 FL 612 071 28.25 68 110 54 43 49 0.14 use bar code
90 x 50 FL 615 391 49.85 117 160 68 49 69 0.49 use bar code
110 x 63 FL 615 393 79.90 142 160 83 55 79 0.73 use bar code
B Black only - 4.0mm Terminal Pins
Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

D1 D A A1

t1 t2

Some Frialen fittings can only be installed using specialist Electrofusion equipment and procedures.
Please contact our Technical Support Department for further information.

NOTE: All Frialen elecrofusion fittings have 4mm terminal pins, 4mm-4.7mm adaptors are required - order code 53EW0002.
Adaptors are available from your usual equipment supplier.

47
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 48

FRIALEN ELECTROFUSION FITTINGS

Electrofusion End Caps


Fusion and
Size SDR 11 A1 B T1 Weight
Each cooling times
A (mm) Black Code (mm) (mm) (mm) (kg)
(secs)
20 FL 612 025 14.30 35 72 33.0 0.04 use bar code
25 FL 612 026 15.25 40 80 36.5 0.06 use bar code
32 FL 612 027 17.55 49 91 42.0 0.09 use bar code
40 FL 612 028 25.65 58 98 45.5 0.13 use bar code
50 FL 612 029 28.90 70 114 53.0 0.19 use bar code
63 FL 612 030 32.85 84 117 55.0 0.27 use bar code
75 FL 612 031 58.90 98 133 61.0 0.39 use bar code
B
90 FL 612 032 66.00 117 155 71.5 0.66 use bar code
110 FL 612 033 85.30 142 181 83.0 1.13 use bar code
125 FL 612 034 103.70 158 186 85.0 1.38 use bar code
A1 A
160 FL 612 035 146.50 206 262 119.5 2.98 use bar code

t1
Black only - 4.0mm Terminal Pins
Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

Electrofusion Top Loading Tees


D2 Fusion and
Size SDR 11 D1 D2 Weight
Each cooling times
D x D1 (mm) Black Code (mm) (mm) (kg)
(secs)
250-315 x 63 FL 615 339 339.10 63 50 1.45 use bar code

Black only - 4.0mm Terminal Pins


D1
Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

Some Frialen fittings can only be installed using specialist Electrofusion equipment and procedures.
Please contact our Technical Support Department for further information

Electrofusion Top Loading Branch Saddles

D1 Fusion and
Size SDR 11 B Weight
Each cooling times
D x D1 (mm) Black Code (mm) (kg)
(secs)
250-630 x 32 FL 615 465 447.30 109 0.62 use bar code
B
250-630 x 63 FL 615 466 447.30 109 0.68 use bar code
250-630 x 90 FL 615 850 447.30 111 0.77 use bar code

Black only - 4.0mm Terminal Pins


D Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

The Friatop clamping unit is required for installation of Frialen Top Loading Branch
Saddles. Please contact Technical Support for further information.

NOTE: These fittings require special instructions when used at 630mm - please contact our Technical Support Department.

48
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 49

ELECTROFUSION FITTINGS
FRIALEN
Electrofusion Under Clamped Branch Saddles
D1
Fusion and
Size SDR 11 B Weight
Each cooling times
D x D1 (mm) Black Code (mm) (kg)
(secs)
B
63 x 32 FL 615 091 120.20 78 0.39 use bar code
90 x 32 FL 615 092 167.70 89 0.78 use bar code
110 x 32 FL 615 093 171.50 109 0.92 use bar code
D 125 x 32 FL 615 094 184.70 109 1.07 use bar code
160 x 32 FL 615 095 257.30 109 1.27 use bar code

Black only - 4.0mm Terminal Pins


Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

NOTE: All Frialen elecrofusion fittings have 4mm terminal pins, 4mm-4.7mm adaptors are required - order code 53EW0002.
Adaptors are available from your usual equipment supplier.

Electrofusion Top Loading Repair Saddle

Fusion and
Size SDR 11 d3 Weight
Each cooling times
d (mm) Black Code (mm) (kg)
(secs)
250-560 FL 615 397 369.30 50 0.6 use bar code

NEW PRODUCT

Electrofusion Under Clamped Spigot Saddles


D1
Fusion and
Size SDR 11 B Weight
Each cooling times
D x D1 (mm) Black Code (mm) (kg)
B (secs)
63 x 50 FL 612 759 141.30 78 0.32 use bar code
75 x 50 FL 615 020 143.90 80 0.43 use bar code
D
125 x 63 FL 612 761 126.10 109 1.05 use bar code
125 x 90 FL 615 412 183.50 116 1.14 use bar code
160 x 110 FL 615 739 381.30 136 1.63 use bar code
180 x 63 FL 612 763 199.30 109 1.25 use bar code
180 x 90 FL 615 414 216.40 116 1.82 use bar code
180 x 110 FL 615 948 406.40 136 1.96 use bar code
180 x 125 FL 615 740 329.80 141 2.09 use bar code
225 x 63 FL 612 765 236.30 109 1.21 use bar code
225 x 90 FL 615 415 240.20 116 1.95 use bar code
225 x 110 FL 616 044 476.15 136 2.07 use bar code
225 x 125 FL 616 045 349.20 141 2.24 use bar code
225 x 160 FL 616 046 380.00 157 2.62 use bar code

Black only - 4.0mm Terminal Pins


Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

49
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 50

FRIALEN ELECTROFUSION FITTINGS

Electrofusion 30 Elbows

Fusion and
30 Size SDR 11 B Z T1 Weight
Z
t1 Each cooling times
D (mm) Black Code (mm) (mm) (mm) (kg)
(secs)
D 90 FL 615 272 75.50 205 23.5 71.5 0.77 use bar code
110 FL 615 273 110.90 240 27 83 1.26 use bar code
125 FL 615 274 150.50 252 29.5 85 1.64 use bar code
160 FL 615 340 289.00 302 40 96 3.87 use bar code
B

Black only - 4.0mm Terminal Pins


Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

Electrofusion Equal Tees

Fusion and
Size SDR 11 A B D1 Weight
Each cooling times
D (mm) Black Code (mm) (mm) (mm) (kg)
(secs)
A
75 FL 612 165 103.70 151 205 98 0.80 use bar code
D1 D
90 FL 612 166 114.90 211 305 117 1.13 use bar code
110 FL 612 167 178.20 248 355 142 2.16 use bar code
B
125 FL 612 168 211.10 272 384 158 2.72 use bar code
160 FL 615 277 428.70 315 430 199 4.89 use bar code
180 FL 615 691 530.30 354 480 228 7.80 use bar code
225 FL 615 692 607.20 432 580 283 13.89 use bar code

Black only - 4.0mm Terminal Pins


Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

Electrofusion Reinforcing Saddles

Fusion and
Size SDR 11 A Weight
Each cooling times
D (mm) Black Code (mm) (kg)
(secs)
63 FL 612 519 134.70 106 0.26 use bar code
D A
Black only - 4.0mm Terminal Pins
Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

Electrofusion Repair & Reinforcing Saddles

Fusion and
Size SDR 11 A D1 Weight
Each cooling times
D (mm) Black Code (mm) (mm) (kg)
(secs)
D1 90 FL 615 164 192.80 148 50 0.92 use bar code
D A
110 FL 615 165 200.60 168 50 1.19 use bar code
125 FL 615 166 212.50 183 50 1.36 use bar code
160 FL 615 168 242.80 218 50 1.66 use bar code
180 FL 615 169 246.80 238 50 1.81 use bar code
200 FL 615 170 347.00 258 50 1.82 use bar code
225 FL 615 171 369.30 283 50 1.87 use bar code

Black only - 4.0mm Terminal Pins


Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

NOTE: All Frialen elecrofusion fittings have 4mm terminal pins, 4mm-4.7mm adaptors are required - order code 53EW0002.
Adaptors are available from your usual equipment supplier.

50
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 51

SPIGOT VALVES
FRIALEN
Full Faced Flanges (Long Spigot Fitting)

D Size SDR 11 A B T1 D1 Weight


Each
D (mm) Black Code (mm) (mm) (mm) (mm) (kg)
t1
A 63/50 PN10/16 FL 615 417 133.40 105 169 53 16.5 1.50
90/80 PN10/16 FL 615 418 175.50 130 204 71 16.5 2.54
D1 110/100 PN10/16 FL 615 419 347.00 150 224 83 16.5 3.20
B 125/100 PN10/16 FL 615 605 356.20 160 224 85 16.5 3.28
160/150 PN10/16 FL 615 421 485.50 190 288 120 20.5 6.14
180/150 PN10/16 FL 615 927 682.40 200 288 120 20.5 6.66
225/200 PN10 FL 615 607 714.90 225 343 120 20.5 9.10

Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)
Drilled to EN 1092-1:2007 Table 13

Reduced Port Ball Valves

Size SDR 11 A B T1 Weight


Each
D (mm) Black Code (mm) (mm) (mm) (kg)
t1
A
32 FL 612 490 308.70 129 310 107 0.54
D
63 FL 612 494 646.40 195 417 125 2.33
90 FL 612 495 1,691.70 245 545 178 4.70
B
125 FL 612 496 1,691.70 245 545 178 5.20
180 FL 615 309 4,281.60 329 544 154 14.20

Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

FRIALOC - PE Shut-Off Valves

Size SDR 11 H L t Weight


Each
D (mm) Black Code (mm) (mm) (mm) (kg)
t
90 FL 616 293 1,735.00 450 720 158 14.20
d 110 FL 616 294 2,040.00 450 720 164 14.50
125 FL 616 295 2,565.00 450 720 174 14.80
L 160 FL 616 296 3,280.00 603 1010 196 37.90
180 FL 616 297 4,189.00 603 1030 210 38.80

Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

Tapping Ball Valve

Size d2 SDR 11 D1 Weight


(mm) Black Code Each (mm) (kg)

63 FL 615 525 1,976.00 250-450 (560) 2,830


90 FL 615 526 2,393.00 250-450 (560) 4,500

Maximum Operating Pressure - 16 bar water (EN 12201-3) and 10 bar gas (EN 1555-3)

NEW PRODUCT Some Frialen fittings can only be installed using specialist Electrofusion equipment and procedures.
Please contact our Technical Support Department for further information

51
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 52

LONG SPIGOT FITTINGS

Reducers

SDR
Size (mm) SDR 11** Each Each Each Each
17/17.6**
d1 x d2 Code 40 Black 58 Yellow 40 Black 58 Yellow
Code
32 x 25 40 441 409 7.94 - - - -
40 x 25 40 441 393 8.99 - - - -
40 x 32 40 441 413 8.99 - 40 440 413 7.75 -
50 x 25 40 441 394 10.20 - 40 440 394 8.80 -
50 x 32 40 441 414 10.20 - 40 440 414 8.80 -
50 x 40 40 441 429 10.20 - 40 440 429 8.80 -
63 x 25 40 441 395 12.75 - 40 440 395 11.00 -
** Replace XX with material/colour required: 63 x 32 XX 441 415 12.75 15.90 40 440 415 11.00 -
58 = PE80 Yellow 63 x 40 40 441 430 12.75 - 40 440 430 11.00 -
40 = PE100 Black 63 x 50 XX 441 444 12.75 12.75 40 440 444 16.45 -
75 x 32 40 441 416 19.25 - 40 440 416 16.45 -
75 x 40 40 441 431 19.25 - 40 440 431 16.45 -
SDR17.6 available in Yellow only. 75 x 50 40 441 445 19.25 - - - -
75 x 63 XX 441 458 19.25 13.55 40 440 458 16.45 -
90 x 50 40 441 446 32.75 - 40 440 446 27.75 -
90 x 63 XX 441 459 32.75 27.50 40 440 459 27.75 -
90 x 75 XX 441 471 32.75 27.50 40 440 471 27.75 -
110 x 50 40 441 447 51.30 - 40 440 447 43.55 -
110 x 63 40 441 460 51.30 - 40 440 460 43.55 -
110 x 75 40 441 472 51.30 - 40 440 472 43.55 -
110 x 90 XX 441 483 51.30 - XX 440 483 43.55 -
125 x 63 40 441 461 51.30 - 40 440 461 43.55 -
125 x 75 XX 441 473 51.30 48.50 40 440 473 43.55 -
125 x 90 XX 441 484 51.30 51.30 XX 440 484 43.55 44.20
125 x 110 XX 441 493 51.30 - 40 440 493 43.55 -
140 x 90 40 441 485 57.40 - 40 440 485 48.80 -
140 x 110 40 441 494 57.40 - 40 440 494 48.80 -
140 x 125 40 441 503 57.40 - 40 440 503 48.80 -
160 x 90 XX 441 486 81.50 - 40 440 486 69.50 -
160 x 110 XX 441 495 81.50 - XX 440 495 69.50 -
160 x 125 XX 441 504 81.50 - 40 440 504 69.50 -
160 x 140 40 441 512 81.45 - 40 440 512 69.50 -
180 x 125 XX 441 505 112.10 105.70 40 440 505 96.80 96.80
180 x 140 40 441 513 112.05 - 40 440 513 96.80 -
180 x 160 40 441 520 112.10 - 40 440 520 96.80 -
200 x 140 40 441 514 113.40 - 40 440 514 96.80 -
200 x 160 40 441 521 113.40 - 40 440 521 96.80 -
200 x 180 40 441 527 113.40 - 40 440 527 96.80 -
225 x 160 XX 441 522 187.10 - 40 440 522 159.10 -
225 x 180 40 441 528 187.10 - 40 440 528 159.10 -
225 x 200 40 441 533 187.10 - 40 440 533 159.10 -
250 x 180 XX 441 529 143.80 128.60 XX 440 529 159.10 128.60
250 x 200 40 441 534 166.60 - 40 440 534 156.50 -
250 x 225 40 441 538 166.60 - 40 440 538 156.50 -
280 x 200 40 441 535 351.00 - 40 440 535 298.90 -
280 x 225 40 441 539 351.00 - 40 440 539 298.90 -
280 x 250 40 441 542 351.00 - 40 440 542 298.90 -
315 x 225 40 441 540 267.10 - 40 440 540 250.60 -
315 x 250 XX 441 543 165.40 143.80 XX 440 543 250.60 134.30
355 x 250 40 441 544 291.30 - - - -
355 x 280 40 441 546 291.30 - - - -
355 x 315 40 441 547 291.30 - - - -
400 x 280 40 441 564 386.60 - - - -
400 x 315 40 441 565 386.60 - - - -
400 x 355 40 441 566 386.60 - - - -

52
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 53

LONG SPIGOT FITTINGS

Reducers

Size (mm) L1 L1 Z SDR11 SDR17/17.6


d1 x d2 (mm) (mm) (mm) Weight (kg) Weight (kg)

32 x 25 50 45 97 0.03 -
40 x 25 49 41 115 0.05 -
40 x 32 50 45 117 0.05 0.03
50 x 25 56 42 130 0.06 0.05
50 x 32 55 47 110 0.07 0.08
50 x 40 55 50 110 0.07 0.08
63 x 25 64 42 137 0.11 0.09
63 x 32 63 51 141 0.12 0.09
63 x 40 63 55 145 0.12 0.10
63 x 50 65 55 149 0.14 0.12
75 x 32 74 50 150 0.18 0.14
75 x 40 74 50 142 0.18 0.15
75 x 50 74 55 145 0.25 -
75 x 63 70 63 165 0.21 0.15
90 x 50 83 55 157 0.28 0.20
90 x 63 84 63 170 0.30 0.23
90 x 75 84 75 192 0.35 0.24
110 x 50 90 55 178 0.44 0.30
110 x 63 94 68 207 0.45 0.31
110 x 75 90 73 187 0.49 0.35
110 x 90 89 83 202 0.55 0.37
125 x 63 102 70 230 0.63 0.40
125 x 75 90 75 188 0.70 0.40
125 x 90 94 82 206 0.78 0.46
125 x 110 102 83 217 0.81 0.51
140 x 90 95 84 207 0.90 0.66
140 x 110 95 90 207 0.92 0.71
140 x 125 98 95 207 0.97 0.76
160 x 90 108 95 248 1.10 0.90
160 x 110 102 92 250 1.30 0.93
160 x 125 111 96 240 1.30 0.96
160 x 140 105 95 220 1.59 1.06
180 x 125 112 94 251 1.60 1.12
180 x 140 100 83 218 1.98 1.34
180 x 160 105 103 220 2.12 1.45
200 x 140 110 100 240 2.31 2.10
200 x 160 110 93 246 2.20 1.65
200 x 180 140 125 277 2.64 1.82
225 x 160 135 118 308 3.20 2.18
225 x 180 120 118 263 3.32 2.24
225 x 200 116 116 397 5.00 2.50
250 x 180 130 111 303 3.70 3.10
250 x 200 138 130 300 3.26 3.54
250 x 225 138 135 288 4.85 3.72
280 x 200 140 112 333 5.85 3.80
280 x 225 140 120 335 6.09 4.10
280 x 250 140 130 340 6.54 4.72
315 x 225 150 120 356 7.90 5.29
315 x 250 150 125 340 7.00 5.54
355 x 250 165 130 390 9.10 -
355 x 280 165 139 390 9.50 -
355 x 315 165 150 390 9.89 -
400 x 280 180 139 415 10.42 -
400 x 315 180 150 415 11.13 -
400 x 355 180 165 420 11.58 -

53
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 54

LONG SPIGOT FITTINGS

90 Elbows

SDR
Size SDR 11** Each Each Each Each
17/17.6**
(mm) Code 40 Black 58 Yellow 40 Black 58 Yellow
Code
25 XX 209 307 5.73 7.40 - - -
32 XX 209 308 6.07 7.71 - - -
50 40 209 310 12.65 - - - -
63 XX 209 311 17.65 16.60 - - -
75 40 210 312 25.30 - - - -
90 XX 210 313 29.65 27.85 XX 208 313 25.30 25.30
110 XX 210 314 36.20 - XX 208 314 31.50 -
125 XX 210 315 42.10 39.60 XX 208 315 36.10 36.10
140 40 210 316 96.75 - XX 208 316 91.10 -
160 XX 210 317 101.30 - XX 208 317 89.10 -
180 XX 210 318 122.80 116.50 XX 208 318 105.00 105.00
200 XX 210 319 159.10 - XX 208 319 115.80 -
Z
L 225 XX 210 320 187.10 - XX 208 320 160.30 -
250 XX 210 321 312.90 296.30 XX 208 321 276.00 276.00
280 XX 210 322 461.60 - XX 208 322 415.90 -
315 XX 210 323 614.20 580.00 XX 208 323 540.40 540.40

** Replace XX with material/colour required: SDR17.6 is available in Yellow only.


40 = PE100 Black Note: 250 and 315mm sizes have sections of pipe butt-fused to the moulding. On these sizes L =
58 = PE80 Yellow minimum length of pipe added.

Size L Z SDR11 SDR17/17.6


(mm) (mm) (mm) Weight (kg) Weight (kg)

25 48 65 0.02 -
32 51 65 0.02 -
50 55 95 0.14 -
63 63 100 0.27 -
75 69 111 0.31 -
90 80 135 0.60 0.60
110 110 166 1.10 0.80
125 92 160 1.50 1.00
140 95 195 1.92 1.43
160 120 220 2.90 2.30
180 120 220 3.60 2.50
200 122 242 5.00 3.80
225 130 268 6.40 5.00
250 150 400 11.50 8.00
280 140 340 15.74 9.00
315 150 420 19.00 12.50

54
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 55

LONG SPIGOT FITTINGS

45 Elbows

SDR
Size SDR 11** Each Each Each Each
17/17.6**
(mm) Code 40 Black 58 Yellow 40 Black 58 Yellow
Code
25 XX 215 307 7.00 7.00 - - -
32 XX 215 308 7.00 7.00 - - -
50 40 215 310 12.65 - - - -
63 XX 215 311 16.70 16.70 - - -
90 XX 216 313 23.65 23.65 XX 214 313 20.10 20.10
110 XX 216 314 31.90 - XX 214 314 27.85 -
125 XX 216 315 38.55 38.55 XX 214 315 33.20 33.20
140 40 216 316 76.30 - XX 214 316 69.50 -
160 40 216 317 95.00 - XX 214 317 80.90 -
180 XX 216 318 107.60 107.60 XX 214 318 91.60 91.60
200 XX 216 319 131.10 - XX 214 319 111.70 -
225 XX 216 320 169.20 - XX 214 320 147.60 -
250 XX 216 321 204.70 204.70 XX 214 321 178.10 178.10
Z
L 280 XX 216 322 461.60 - XX 214 322 415.90 -
315 XX 216 323 357.30 335.80 XX 214 323 307.80 307.80

SDR17.6 is available in Yellow only.


** Replace XX with material/colour required: Note: 250 and 315mm sizes have sections of pipe butt-fused to the moulding. On these sizes L =
40 = PE100 Black minimum length of pipe added.
58 = PE80 Yellow

Size L Z SDR11 SDR17/17.6


(mm) (mm) (mm) Weight (kg) Weight (kg)

25 35 41 0.03 -
32 57 75 0.05 -
50 65 75 0.09 -
63 63 84 0.24 -
90 79 95 0.50 0.32
110 87 107 0.90 0.60
125 94 116 1.20 0.90
140 98 190 1.60 1.10
160 103 135 2.30 1.60
180 120 157 2.60 2.00
200 122 172 3.70 2.40
225 130 185 5.10 4.10
250 130 246 9.70 6.30
280 140 246 10.60 8.10
315 150 293 16.50 12.50

55
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 56

LONG SPIGOT FITTINGS

90 Equal Tees

SDR
Size SDR 11** Each Each Each Each
17/17.6**
(mm) Code 40 Black 58 Yellow 40 Black 58 Yellow
Code
63 XX 221 311 17.75 16.80 - - -
75 XX 222 312 55.50 - - - -
90 XX 222 313 40.35 37.90 XX 220 313 34.50 34.60
110 XX 222 314 55.50 - XX 220 314 47.95 -
125 XX 222 315 81.50 76.30 XX 220 315 69.50 69.50
140 40 222 316 122.75 - XX 220 316 114.50 -
160 XX 222 317 137.50 - XX 220 317 119.70 -
180 XX 222 318 194.70 183.20 XX 220 318 169.20 169.20
200 XX 222 319 212.40 - XX 220 319 198.50 -
225 XX 222 320 274.70 - XX 220 320 254.40 -
250 XX 222 321 379.00 357.30 XX 220 321 329.50 329.50
280 XX 222 322 935.85 - XX 220 322 875.30 -
B 315 XX 222 323 944.90 893.50 - -

SDR17.6 is available in Yellow only.


Note: 250 and 315mm sizes have sections of pipe butt-fused to the moulding. On these sizes L =
minimum length of pipe added.
L

** Replace XX with material/colour required:


40 = PE100 Black Size L B Z SDR11 SDR17/17.6
58 = PE80 Yellow (mm) (mm) (mm) (mm) Weight (kg) Weight (kg)

63 67 240 123 0.35 -


75 70 260 143 0.66 -
90 79 310 165 1.20 1.00
110 87 326 175 1.70 1.40
125 92 375 197 2.42 2.00
140 90 390 193 3.20 2.12
160 103 419 208 4.50 3.00
180 120 509 270 7.10 5.50
200 122 500 270 8.00 6.40
225 130 550 275 11.12 9.00
250 130 687 344 18.70 12.16
280 140 692 346 18.67 12.65
315 150 830 413 37.60 -

56
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 57

LONG SPIGOT FITTINGS

Stub Flanges

SDR
Size SDR 11** Each Each Each Each
17/17.6**
(mm) Code 40 Black 58 Yellow 40 Black 58 Yellow
Code
32* XX 227 308 8.76 - - - -
40* XX 227 309 10.20 - - - -
50* XX 227 310 12.50 - - - -
63 XX 227 311 19.40 19.15 - - -
75 XX 228 312 23.55 - XX 226 312 19.95 -
90 XX 228 313 26.90 26.55 XX 226 313 24.65 24.55
t 110 XX 228 314 33.40 - XX 226 314 30.40 -
125 XX 228 315 41.75 41.00 XX 226 315 38.00 38.00
140 XX 228 316 50.10 - XX 226 316 42.60 -
160 XX 228 317 59.60 - XX 226 317 54.40 -
180 XX 228 318 96.10 94.20 XX 226 318 87.30 87.30
A 200 XX 228 319 136.30 134.85 XX 226 319 124.80 124.80
225 XX 228 320 152.60 - XX 226 320 138.80 -
250 XX 228 321 263.40 - XX 226 321 239.20 138.80
L 280 XX 228 322 291.30 - XX 226 322 263.40 -
315 XX 228 323 326.90 - XX 226 323 297.60 234.10
B 355 XX 228 324 395.50 - XX 226 324 335.80 -
400 XX 228 325 431.15 - XX 226 325 367.60 542.50
SDR17.6 is available in Yellow only.
Note: 250 and 315mm sizes have sections of pipe butt-fused to the moulding. On these sizes L =
minimum length of pipe added.

** Replace XX with material/colour required:


40 = PE100 Black A B L t SDR11 SDR17/17.6
58 = PE80 Yellow (mm) (mm) (mm) (mm) Weight (kg) Weight (kg)

32 88 60 10 0.06 -
78 100 60 12 0.09 -
87 100 65 13 0.13 -
102 117 63 14 0.22 -
122 127 85 16 0.30 0.24
138 136 79 17 0.46 0.37
158 136 82 18 0.65 0.52
158 179 92 25 1.00 0.70
188 288 103 25 1.45 1.20
212 179 98 25 1.55 1.33
212 175 106 30 1.80 1.40
268 179 115 32 2.50 2.10
268 179 125 32 2.80 2.10
320 284 180 32 3.70 4.40
320 245 156 35 8.40 6.00
370 270 185 35 8.50 6.00
430 272 194 30 10.50 7.40
482 304 219 33 9.60 6.80

57
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 58

LONG SPIGOT FITTINGS

Stub Flange Assemblies

SDR
Size (mm) SDR 11** Each Each Each Each
17/17.6**
d1 x d2 Code 40 Black 58 Yellow 40 Black 58 Yellow
Code
63 x 50 XX 329 311 47.75 46.90 - - -
90 x 80 XX 329 313 57.30 54.70 XX 328 313 54.10 57.10
110 x 100 XX 329 314 69.50 - XX 328 314 64.90 -
125 x 100 XX 329 315 78.50 75.90 XX 328 315 73.30 78.50
160 x 150 XX 329 317 133.60 - XX 328 317 112.90 -
180 x 150 XX 329 318 178.90 169.80 XX 328 318 146.40 177.60
225 x 200 XX 329 320 226.80 - XX 328 320 149.10 -
** Replace XX with material/colour required:
250 x 250 XX 329 321 475.50 466.40 XX 328 321 414.50 421.00
40 = PE100 Black 315 x 300 XX 329 323 590.80 527.30 XX 328 323 485.80 583.20
58 = PE80 Yellow
Stub Flange Assemblies include the appropriate backing ring and gasket. Bolt set not supplied.
Drilled to BS EN 1092-1:2007 Table 13.

A range of SlimFlange fittings are also available as pupped fittings only - see pupped section on page 78.

SDR11 SDR11 SDR17/17.6 SDR17/17.6


Size (mm)
Black Yellow Black Yellow
d1 x d2
Weight (kg) Weight (kg) Weight (kg) Weight (kg)
63 x 50 1.70 1.20 - -
90 x 80 2.90 1.70 1.40 1.60
110 x 100 3.40 - 2.10 -
125 x 100 3.70 2.50 2.30 2.20
160 x 150 7.30 - 4.20 -
180 x 150 7.20 4.60 4.20 4.20
225 x 200 9.60 - 5.70 -
250 x 250 15.20 10.70 10.90 11.40
315 x 300 23.40 17.50 16.60 15.00

58
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 59

LONG SPIGOT FITTINGS

Stub Flange Adaptor Kits SDR17/17.6


Adaptor Kit comprises of:-
1 x Stub Flange Size (mm) Yellow Each
d1 x d2 Code 58 Yellow
1 X Coupler
1 x Gasket (representation) 63 x 50 58 250 311 75.90
1 x backing Ring
90 x 80 58 250 313 103.20
125 x 100 58 250 315 128.50
1 x Bolt set
90 x 100 58 250 484 115.50
180 x 150 58 250 318 278.50
250 x 250 58 250 321 511.60
250 x 200 58 250 534 662.80
315 x 300 58 250 323 683.50

Drilled to BS EN 1092-1:2007 Table 13.


Note: Sizes 250 and 315mm have sections of pipe butt-fused to the moulding.

59
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 60

LONG SPIGOT FITTINGS

Reduced Branch Tees

Size (mm) SDR 11 SDR17


Each Each
d1 x d2 Black Code Black Code

63 x 32 40 378 415 21.95 40 377 415 17.90


63 x 40 40 378 430 21.95 40 377 430 17.90
63 x 50 40 378 444 21.95 40 377 444 17.90
75 x 32 40 378 416 38.85 40 377 416 33.00
75 x 40 40 378 431 38.85 40 377 431 33.00
75 x 50 40 378 445 38.85 40 377 445 33.00
75 x 63 40 378 458 38.85 40 377 458 33.00
90 x 32 40 378 417 47.65 40 377 417 40.45
90 x 50 40 378 446 47.65 40 377 446 40.45
90 x 63 40 378 459 47.65 40 377 459 40.45
90 x 75 40 378 471 47.65 40 377 471 40.45
110 x 32 40 378 418 63.70 40 377 418 59.50
110 x 50 40 378 447 63.70 40 377 447 59.50
B 110 x 63 40 378 460 63.70 40 377 460 59.50
110 x 75 40 378 472 63.70 40 377 472 59.50
110 x 90 40 378 483 63.70 40 377 483 59.50
125 x 63 40 378 461 96.75 40 377 461 90.40
125 x 75 40 378 473 96.75 40 377 473 90.40
L
125 x 90 40 378 484 96.75 40 377 484 90.40
125 x 110 40 378 493 96.75 40 377 493 90.40
140 x 63 40 378 462 141.60 40 377 462 132.40
140 x 75 40 378 474 141.60 40 377 474 132.40
Available in Black PE100 (Excel) only. 140 x 90 40 378 485 141.60 40 377 485 132.40
PE80 Yellow made to order only. 140 x 110 40 378 494 141.60 40 377 494 132.40
Note: 140 x 125 40 378 503 141.60 40 377 503 132.40
160 x 63 40 378 463 179.40 40 377 463 167.90
some fittings will be produced from short
160 x 75 40 378 475 179.40 40 377 475 167.90
spigots and pupped.
160 x 90 40 378 486 179.40 40 377 486 167.90
160 x 110 40 378 495 179.40 40 377 495 167.90
160 x 125 40 378 504 179.40 40 377 504 167.90
160 x 140 40 378 512 179.40 40 377 512 167.90
180 x 63 40 378 464 240.50 40 377 464 225.20
180 x 90 40 378 487 240.50 40 377 487 225.20
180 x 110 40 378 496 240.50 40 377 496 225.20
180 x 125 40 378 505 240.50 40 377 505 225.20
180 x 140 40 378 513 240.50 40 377 513 225.20
180 x 160 40 378 520 240.50 40 377 520 225.20
200 x 63 40 378 465 353.60 40 377 465 330.70
200 x 90 40 378 488 353.60 40 377 488 330.70
200 x 110 40 378 497 353.60 40 377 497 330.70
200 x 125 40 378 506 353.60 40 377 506 330.70
200 x 140 40 378 514 353.60 40 377 514 330.70
200 x 160 40 378 521 353.60 40 377 521 330.70
200 x 180 40 378 527 353.60 40 377 527 330.70
225 x 75 40 378 478 426.00 40 377 478 398.10
225 x 90 40 378 489 426.00 40 377 489 398.10
225 x 110 40 378 498 426.00 40 377 498 398.10
225 x 125 40 378 507 426.00 40 377 507 398.10
225 x 140 40 378 515 426.00 40 377 515 398.10
225 x 160 40 378 522 426.00 40 377 522 398.10
225 x 180 40 378 528 426.00 40 377 528 398.10
225 x 200 40 378 533 426.00 40 377 533 398.10
250 x 110 40 378 499 695.50 40 377 499 651.70
250 x 140 40 378 516 695.50 40 377 516 651.70
250 x 160 40 378 523 695.50 40 377 523 651.70
250 x 180 40 378 529 695.50 40 377 529 651.70
315 x 90 40 378 492 1,104.30 40 377 492 1,033.70
315 x 110 40 378 501 1,104.30 40 377 501 1,033.70
315 x 160 40 378 525 1,104.30 40 377 525 1,033.70
315 x 180 40 378 531 1,104.30 40 377 531 1,033.70
315 x 200 40 378 536 1,104.30 40 377 536 1,033.70
315 x 225 40 378 540 1,104.30 40 377 540 1,033.70
315 x 250 40 378 543 1,104.30 40 377 543 1,033.70

60
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 61

LONG SPIGOT FITTINGS

Size (mm) B L SDR11 SDR17/17.6


d1 x d2 (mm) (mm) Weight (kg) Weight (kg)

63 x 32 228 46 0.30 0.22


63 x 40 232 53 0.30 0.22
63 x 50 215 56 0.30 0.22
75 x 32 260 50 0.49 0.40
75 x 40 260 50 0.53 0.40
75 x 50 260 55 0.53 0.41
75 x 63 255 63 0.76 0.44
90 x 32 303 50 0.56 0.44
90 x 50 303 60 0.60 0.63
90 x 63 303 65 0.85 0.66
90 x 75 272 68 0.78 1.02
110 x 32 320 50 0.94 0.55
110 x 50 320 55 0.94 0.70
110 x 63 316 62 1.45 1.10
110 x 75 309 70 1.16 0.89
110 x 90 320 78 1.52 1.07
125 x 63 320 68 1.40 1.04
125 x 75 357 72 1.60 1.05
125 x 90 320 82 1.60 1.05
125 x 110 341 83 1.84 1.24
140 x 63 386 77 1.88 1.26
140 x 75 386 78 1.34 1.32
140 x 90 388 87 1.92 1.36
140 x 110 388 95 2.24 2.20
140 x 125 390 94 3.37 2.20
160 x 63 424 72 3.30 1.98
160 x 75 424 73 2.66 1.91
160 x 90 424 84 2.90 2.62
160 x 110 425 93 2.90 2.68
160 x 125 425 91 2.98 3.01
160 x 140 427 95 4.60 3.01
180 x 63 450 68 3.34 2.30
180 x 90 460 85 3.50 2.45
180 x 110 460 95 3.30 2.50
180 x 125 430 100 3.38 2.50
180 x 140 460 104 3.60 2.55
180 x 160 460 110 6.06 3.07
200 x 63 500 70 4.70 2.80
200 x 90 500 82 6.50 2.90
200 x 110 500 91 6.50 3.30
200 x 125 500 100 6.58 3.40
200 x 140 500 100 6.50 3.50
200 x 160 500 104 4.88 3.62
200 x 180 500 130 4.88 5.10
225 x 75 555 70 8.47 4.64
225 x 90 535 82 8.47 6.49
225 x 110 522 92 8.28 6.49
225 x 125 522 93 6.58 4.52
225 x 140 535 105 7.89 4.60
225 x 160 522 109 6.85 7.30
225 x 180 560 105 8.00 7.18
225 x 200 535 105 10.40 6.80
250 x 110 600 91 8.00 6.14
250 x 140 535 105 7.80 6.25
250 x 160 600 104 7.89 6.36
250 x 180 600 105 18.20 11.90
315 x 90 700 82 8.62 5.70
315 x 110 700 90 8.63 5.73
315 x 160 700 106 12.38 10.00
315 x 180 700 107 14.53 7.92
315 x 200 700 120 15.50 8.27
315 x 225 700 120 16.90 8.71
315 x 250 695 130 18.30 9.86

61
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 62

LONG SPIGOT FITTINGS

Flanged Branch Tees

Size (mm) SDR 11 SDR17


Each Each
d1 x d2 Black Code Black Code

63 x 50 PN16 40 350 311 58.10 - -


63 x 80 PN16 - - 40 363 311 90.20
90 x 80 PN16 40 351 313 141.40 40 363 313 122.60
110 x 80 PN16 40 351 314 255.30 40 363 314 212.50
125 x 80 PN16 40 351 315 291.50 40 363 315 247.50
160 x 80 PN16 40 351 317 313.50 40 363 317 358.90
180 x 80 PN16 40 351 318 348.50 40 363 318 296.70
225 x 80 PN16 40 351 320 899.30 40 363 320 899.30
250 x 80 PN16 40 351 321 893.80 40 363 321 762.00
Z 315 x 80 PN16 40 351 323 1,792.00 40 363 323 1,529.30
L
90 x 100 PN16 40 352 313 207.50 40 364 313 177.60
110 x 100 PN16 40 352 314 243.70 40 364 314 225.50
125 x 100 PN16 40 352 315 275.90 40 364 315 234.50
160 x 100 PN16 40 352 317 329.10 40 364 317 318.80
B 180 x 100 PN16 40 352 318 348.50 40 364 318 296.70
225 x 100 PN16 40 352 320 668.40 40 364 320 569.90
250 x 100 PN16 40 352 321 838.30 40 364 321 712.90
Drilled to BS EN 1092-1:2007 Table 13. 315 x 100 PN16 40 352 323 1,661.20 40 364 323 1,417.00
180 x 150 PN16 40 353 318 347.20 40 365 318 296.70
Note: 225 x 150 PN16 40 353 320 610.40 40 365 320 523.40
Sizes 250 and 315mm have sections of 250 x 150 PN16 40 353 321 788.10 40 365 321 669.30
315 x 150 PN16 40 353 323 1,691.70 40 365 323 1,442.10
pipe butt-fused to the moulding.

Size (mm) B L Z SDR11 SDR17/17.6


d1 x d2 (mm) (mm) (mm) Weight (kg) Weight (kg)

63 x 50 PN16 240 67 200 1.50 -


63 x 80 PN16 240 67 240 - 2.40
90 x 80 PN16 310 79 165 1.70 1.20
110 x 80 PN16 326 87 289 3.00 2.10
125 x 80 PN16 375 92 260 2.40 1.70
160 x 80 PN16 419 103 330 4.90 3.40
180 x 80 PN16 509 120 335 9.60 6.70
225 x 80 PN16 550 130 492 13.80 9.70
250 x 80 PN16 687 130 580 20.73 14.50
315 x 80 PN16 870 150 740 37.10 26.00
90 x 100 PN16 310 79 240 1.70 1.20
110 x 100 PN16 326 87 175 3.00 2.10
125 x 100 PN16 372 92 215 3.90 1.70
160 x 100 PN16 419 103 332 6.50 4.60
180 x 100 PN16 509 110 290 9.60 6.70
225 x 100 PN16 550 130 494 14.00 9.70
250 x 100 PN16 687 130 520 20.73 14.50
315 x 100 PN16 830 150 680 42.10 29.50
180 x 150 PN16 509 110 230 9.60 6.70
225 x 150 PN16 550 130 363 15.80 11.10
250 x 150 PN16 687 130 410 21.73 15.20
315 x 150 PN16 870 150 570 43.10 30.20

62
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 63

LONG SPIGOT FITTINGS

PE100 All Flanged Equal Tees

Size (mm) SDR 11 SDR17 B Z* SDR11 SDR17


Each Each
d1 x d2 Black Code Black Code (mm) (mm) Weight (kg) Weight (kg)

63 x 50 PN16** 50 354 311 149.10 - - 474 240 4.03 -


90 x 80 PN16* 40 354 313 188.00 - - 582 301 6.22 5.91
110 x 100 PN16 40 354 314 265.70 - - 598 311 8.05 7.46
125 x 100 PN16* 40 354 315 260.50 - - 733 376 9.70 8.60
180 x 150 PN16* 40 354 318 471.60 - - 859 445 19.70 17.30
250 x 250 PN16 40 354 321 1,898.80 40 368 321 1,898.80 1255 628 48.70 36.00
315 x 300 PN16 40 354 323 2,026.40 - - 1370 683 94.30 -

* Dimension Z, and dimension B are approximate and are calculated by adding together the lengths of the component parts. The nature of the
Z
fabrication process is such that the final dimension may be slightly less than the sum of the individual component parts.
** PE80 not PE100
Drilled to BS EN 1092-1:2007 Table 13.
B

End Caps

SDR
Size SDR 11** Each Each Each Each
17/17.6**
(mm) Code 40 Black 58 Yellow 40 Black 58 Yellow
Code
20 XX 233 306 5.14 4.77 - - -
25 XX 233 307 5.14 4.45 - - -
32 40 233 308 8.29 - - - -
40 40 233 309 7.24 - - - -
50 40 233 310 11.80 - - - -
63 XX 233 311 12.75 12.15 - - -
L 75 40 234 312 16.25 - - - -
90 XX 234 313 21.85 23.05 40 232 313 18.35 -
110 40 234 314 29.00 - 40 232 314 23.35 -
125 XX 234 315 34.25 32.10 40 232 315 26.55 -
140 40 234 316 54.30 - 40 232 316 48.50 -
160 40 234 317 57.00 - 40 232 317 45.60 -
180 XX 234 318 67.60 64.40 XX 232 318 51.60 69.50
250 XX 234 321 165.40 157.80 XX 232 321 128.40 114.50
Z 280 40 234 322 178.10 - 40 232 322 167.90 -
315 XX 234 323 312.90 296.30 XX 232 323 239.20 241.70
** Replace XX with material/colour required: 355 40 234 324 418.40 - 40 232 324 357.40 -
40 = PE100 Black 400 40 234 325 605.70 - 40 232 325 542.50 -
58 = PE80 Yellow
SDR 17.6 is available in Yellow only.

Size L Z SDR11 SDR17/17.6


(mm) (mm) (mm) Weight (kg) Weight (kg)

20 57 58 0.01 -
25 45 65 0.01 -
32 50 55 0.03 -
40 60 76 0.03 -
50 65 90 0.05 -
63 64 85 0.10 -
75 80 86 0.15 0.11
90 72 124 0.30 0.17
110 82 138 0.33 0.30
125 92 155 0.70 0.63
140 100 116 0.74 0.50
160 108 179 1.30 0.80
180 120 200 1.82 1.66
250 195 330 5.00 4.50
280 112 117 5.00 3.35
315 195 358 8.70 6.50
355 115 120 9.78 6.51
400 290 310 13.37 9.33

63
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 64

LONG SPIGOT FITTINGS

90 Formed Bend

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 XX 371 313 116.10 116.10 127.50 XX 370 313 101.20 101.20 111.20
110 XX 371 314 161.00 161.00 - XX 370 314 141.10 141.10 -
125 XX 371 315 200.80 200.80 220.70 XX 370 315 170.80 170.80 187.90
160 XX 371 317 355.80 355.80 - XX 370 317 288.90 288.90 -
180 XX 371 318 435.50 435.50 478.20 XX 370 318 407.10 407.10 447.00
200 XX 371 319 526.60 526.60 - XX 370 319 434.10 434.10 -
225 XX 371 320 696.60 696.60 - XX 370 320 542.50 542.50 -
250 XX 371 321 818.60 818.60 901.00 XX 370 321 662.40 662.40 728.70
280 XX 371 322 1,058.30 1,058.30 - XX 370 322 831.40 831.40 -
315 XX 371 323 1,298.00 1,298.00 1,428.50 XX 370 323 1,043.30 1,043.30 1,149.20
355 XX 371 324 1,470.20 1,470.20 1,615.70 XX 370 324 1,279.80 1,279.80 1,406.00
400 XX 371 325 1,967.80 1,967.80 2,164.70 XX 370 325 1,662.80 1,662.80 1,826.50
450 XX 371 326 2,637.60 2,637.60 2,901.90 XX 370 326 2,078.00 2,078.00 2,284.50
L1 R 500 XX 371 327 3,111.60 3,111.60 3,420.80 XX 370 327 2,596.90 2,596.90 2,855.90
560 XX 371 328 P.O.A. P.O.A. P.O.A. XX 370 328 P.O.A. P.O.A. P.O.A.
L 630 XX 371 329 P.O.A. P.O.A. P.O.A. XX 370 329 P.O.A. P.O.A. P.O.A.
710 XX 371 330 P.O.A. P.O.A. - XX 370 330 P.O.A. P.O.A. -
800 - - - - XX 370 332 P.O.A. P.O.A. -
** Replace XX with 900 - - - - XX 370 333 P.O.A. P.O.A. -
material/colour required: 1000 - - - - XX 370 334 P.O.A. P.O.A. -
40 = PE100 Black 1200 - - - - XX 370 335 P.O.A. P.O.A. -
58 = PE80 Yellow
Note: the pressure rating of SDR 17/17.6 bends above 250mm may be reduced from that of the standard pipe
Note: the pressure rating of SDR 11 bends above 140mm may be reduced from that of the standard pipe

SDR 17.6 is available in Yellow only.

Size Min L Min L1 SDR11 SDR17/17.6


R/D
(mm) (mm) (mm) Weight (kg) Weight (kg)

90 705 300 4.5 2.6 1.7


110 795 300 4.5 4.4 2.9
125 862 300 4.5 6.1 4.0
160 1120 400 4.5 12.8 7.0
180 1210 400 4.5 17.4 11.3
200 1310 400 4.5 23.9 15.6
225 1412 400 4.5 33.7 21.8
250 1625 500 4.5 47.3 30.8
280 1760 500 4.5 63.0 43.9
315 1918 500 4.5 88.1 57.4
355 2148 550 4.5 125.2 81.5
400 2400 600 4.5 177.4 115.4
450 2675 650 4.5 250.0 162.6
500 2950 700 4.5 340.0 221.2

64
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 65

LONG SPIGOT FITTINGS

45 Formed Bend

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 XX 376 313 101.90 101.90 113.30 XX 375 313 89.20 89.20 87.30
110 XX 376 314 141.10 141.10 - XX 375 314 123.20 123.20 -
125 XX 376 315 166.60 166.60 183.80 XX 375 315 143.90 143.90 142.50
160 XX 376 317 298.90 298.90 - XX 375 317 246.30 246.30 -
180 XX 376 318 354.50 354.50 390.10 XX 375 318 343.00 343.00 337.10
200 XX 376 319 445.50 445.50 - XX 375 319 375.80 375.80 -
225 XX 376 320 559.70 559.70 - XX 375 320 469.70 469.70 -
L
250 XX 376 321 670.90 670.90 739.40 XX 375 321 563.90 563.90 619.60
280 XX 376 322 868.90 868.90 - XX 375 322 709.50 709.50 -
315 XX 376 323 1,055.10 1,055.10 1,159.90 XX 375 323 887.10 887.10 873.20
355 XX 376 324 1,171.70 1,171.70 1,289.40 XX 375 324 998.40 998.40 981.20
400 XX 376 325 1,563.30 1,563.30 1,719.50 XX 375 325 1,288.30 1,288.30 1,417.80
R 450 XX 376 326 1,980.60 1,980.60 2,177.50 XX 375 326 1,642.50 1,642.50 1,806.20
L1
500 XX 376 327 2,347.60 2,347.60 2,582.00 XX 375 327 2,043.70 2,043.70 2,247.00
560 XX 376 328 3,831.70 3,831.70 4,210.50 XX 375 328 3,419.80 3,419.80 3,760.00
** Replace XX with 630 XX 376 329 5,788.70 5,788.70 6,367.60 XX 375 329 4,811.80 4,811.80 5,291.20
material/colour required: 710 XX 376 330 P.O.A. P.O.A. - XX 375 330 P.O.A. P.O.A. -
40 = PE100 Black 800 - - - - XX 375 332 P.O.A. P.O.A. -
58 = PE80 Yellow 900 - - - - XX 375 333 P.O.A. P.O.A. -
1000 - - - - XX 375 334 P.O.A. P.O.A. -
1200 - - - - XX 375 335 P.O.A. P.O.A. -

Note: the pressure rating of SDR 17/17.6 bends above 250mm may be reduced from that of the standard pipe
Note: the pressure rating of SDR 11 bends above 140mm may be reduced from that of the standard pipe

SDR 17.6 is available in Yellow only.

Size Min L Min L1 SDR11 SDR17/17.6


R/D
(mm) (mm) (mm) Weight (kg) Weight (kg)

90 455 300 4.5 1.9 1.3


110 489 300 4.5 3.1 2.1
125 515 300 4.5 4.3 2.8
160 676 400 4.5 9.1 5.9
180 710 400 4.5 12 7.8
200 750 400 4.5 16.3 10.6
225 787 400 4.5 22.2 14.4
250 831 500 4.5 31.7 20.7
280 982 500 4.5 42.5 27.7
315 1042 500 4.5 56.9 37.1
355 1161 550 4.5 80.4 52.3
400 1289 600 4.5 113.6 73.9
450 1425 650 4.5 158.8 103.3
500 1561 700 4.5 214.7 137.5
560 1664 700 4.5 292.7 192.8
630 1885 800 4.5 418.2 282.9

65
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 66

LONG SPIGOT FITTINGS

2212 Formed Bend

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 XX 381 313 92.00 92.00 100.50 XX 380 313 79.90 79.90 88.30
110 XX 381 314 125.50 125.50 - XX 380 314 109.70 109.70 -
125 XX 381 315 146.70 146.70 162.40 XX 380 315 126.80 126.80 139.70
160 XX 381 317 260.50 260.50 - XX 380 317 227.70 227.70 -
180 XX 381 318 313.10 313.10 343.00 XX 380 318 310.30 310.30 342.40
200 XX 381 319 372.90 372.90 - XX 380 319 331.60 331.60 -
225 XX 381 320 499.50 499.50 - XX 380 320 410.00 410.00 -
L
250 XX 381 321 601.40 601.40 662.40 XX 380 321 492.50 492.50 542.50
280 XX 381 322 753.30 753.30 - XX 380 322 605.70 605.70 -
315 XX 381 323 916.00 916.00 1,006.90 XX 380 323 779.00 779.00 856.00
355 XX 381 324 1,058.30 1,058.30 1,058.30 XX 380 324 864.60 864.60 951.30
400 XX 381 325 1,339.70 1,339.70 1,473.40 XX 380 325 1,075.40 1,075.40 1,181.30
L1 R 450 XX 381 326 1,667.10 1,667.10 1,833.00 XX 380 326 1,334.30 1,334.30 1,468.10
500 XX 381 327 1,927.10 1,927.10 2,121.90 XX 380 327 1,617.90 1,617.90 1,779.50
560 XX 381 328 3,314.90 3,314.90 3,645.50 XX 380 328 2,858.00 2,858.00 3,143.70
630 XX 381 329 4,725.20 4,725.20 5,196.00 XX 380 329 3,973.00 3,973.00 4,369.90
710 XX 381 330 P.O.A. P.O.A. - XX 380 330 P.O.A. P.O.A. -
** Replace XX with 800 - - - - XX 380 332 P.O.A. P.O.A. -
material/colour required:
900 - - - - XX 380 333 P.O.A. P.O.A. -
40 = PE100 Black 1000 - - - - XX 380 334 P.O.A. P.O.A. -
58 = PE80 Yellow
1200 - - - - XX 380 335 P.O.A. P.O.A. -

Note: the pressure rating of SDR 17/17.6 bends above 250mm may be reduced from that of the standard pipe
Note: the pressure rating of SDR 11 bends above 140mm may be reduced from that of the standard pipe

SDR 17.6 is available in Yellow only.

Size Min L Min L1 SDR11 SDR17/17.6


R/D
(mm) (mm) (mm) Weight (kg) Weight (kg)

90 381 300 4.5 1.6 1.1


110 398 300 4.5 2.5 1.7
125 412 300 4.5 3.4 2.2
160 543 400 4.5 7.2 4.7
180 561 400 4.5 9.4 6.1
200 580 400 4.5 12.5 8.2
225 601 400 4.5 16.9 11
250 724 500 4.5 24 15.6
280 751 500 4.5 32.6 21.2
315 782 500 4.5 41.1 26.8
355 868 550 4.5 58.1 37.8
400 958 600 4.5 81.5 53
450 1053 650 4.5 113.5 73.9
500 1148 700 4.5 152.3 99.1
560 1201 700 4.5 202.4 133
630 1364 800 4.5 290.8 196.9

66
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 67

LONG SPIGOT FITTINGS

1114 Formed Bend

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 XX 373 313 88.30 88.30 97.60 XX 372 313 77.70 77.70 84.80
110 XX 373 314 121.80 121.80 - XX 372 314 107.60 107.60 -
125 XX 373 315 141.10 141.10 155.30 XX 372 315 123.20 123.20 135.30
160 XX 373 317 260.10 260.10 - XX 372 317 219.30 219.30 -
180 XX 373 318 313.10 313.10 343.00 XX 372 318 310.30 310.30 341.60
200 XX 373 319 372.90 372.90 - XX 372 319 331.60 331.60 -
225 XX 373 320 503.60 503.60 - XX 372 320 410.00 410.00 -
L
250 XX 373 321 601.40 601.40 662.40 XX 372 321 492.50 492.50 542.50
280 XX 373 322 753.30 753.30 - XX 372 322 605.70 605.70 -
315 XX 373 323 916.00 916.00 1,006.90 XX 372 323 779.00 779.00 856.00
355 XX 373 324 1,058.30 1,058.30 1,163.10 XX 372 324 864.60 864.60 951.30
400 XX 373 325 1,339.70 1,339.70 1,473.40 XX 372 325 1,075.40 1,075.40 1,181.30
L1 R 450 XX 373 326 1,667.10 1,667.10 1,833.00 XX 372 326 1,334.30 1,334.30 1,468.10
500 XX 373 327 1,927.10 1,927.10 2,121.90 XX 372 327 1,617.90 1,617.90 1,779.50
560 XX 373 328 3,273.20 3,273.20 3,600.60 XX 372 328 2,824.80 2,824.80 3,108.40
630 XX 373 329 4,643.80 4,643.80 5,108.20 XX 372 329 3,528.90 3,528.90 3,880.90
710 XX 373 330 P.O.A. P.O.A. - XX 372 330 P.O.A. P.O.A. -
** Replace XX with 800 - - - - XX 372 332 P.O.A. P.O.A. -
material/colour required:
900 - - - - XX 372 333 P.O.A. P.O.A. -
40 = PE100 Black 1000 - - - - XX 372 334 P.O.A. P.O.A. -
58 = PE80 Yellow
1200 - - - - XX 372 335 P.O.A. P.O.A. -

Note: the pressure rating of SDR 17/17.6 bends above 250mm may be reduced from that of the standard pipe
Note: the pressure rating of SDR 11 bends above 140mm may be reduced from that of the standard pipe

SDR 17.6 is available in Yellow only.

Size Min L Min L1 SDR11 SDR17/17.6


R/D
(mm) (mm) (mm) Weight (kg) Weight (kg)

90 340 300 4.5 1.4 0.9


110 349 300 4.5 2.2 1.4
125 356 300 4.5 2.9 1.9
160 471 400 4.5 6.2 4.1
180 480 400 4.5 8.0 5.2
200 490 400 4.5 10.6 6.9
225 500 400 4.5 13.9 9.1
250 611 500 4.5 20.1 13.1
280 624 500 4.5 26.7 17.4
315 640 500 4.5 35.8 23.3
355 707 550 4.5 47.0 30.6
400 777 600 4.5 65.4 42.6
450 849 650 4.5 90.6 59.0
500 922 700 4.5 121.5 79.0
560 948 700 4.5 158.0 103.9
630 1079 800 4.5 227.5 154.1

67
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 68

PUPPED FITTINGS
Reducers

Size (mm) SDR 11** Each Each Each SDR 17/17.6** Each Each Each
d1 x d2 Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 x 63 XX 323 459 57.20 57.20 52.70 XX 322 459 55.20 55.20 50.00
110 x 90 XX 323 483 64.40 64.40 - XX 322 483 60.70 60.70 -
125 x 63 XX 323 461 84.70 84.70 75.80 XX 322 461 82.20 82.20 73.20
125 x 90 XX 323 484 86.60 86.60 75.80 XX 322 484 81.50 81.50 73.20
160 x 90 XX 323 486 103.80 103.80 - XX 322 486 98.70 98.70 -
160 x 110 XX 323 495 158.90 159.10 - XX 322 495 150.20 150.20 -
B 160 x 125 XX 323 504 164.20 164.20 - XX 322 504 156.50 156.50 -
180 x 90 XX 323 487 202.40 202.40 171.80 XX 322 487 189.70 189.70 166.60
180 x 125 XX 323 505 161.60 161.60 136.30 XX 322 505 152.60 152.60 133.70
200 x 160 XX 323 506 156.00 156.00 153.00 XX 322 506 143.87 143.87 139.87
L L
225 x 160 XX 323 507 180.30 180.30 176.51 XX 322 507 169.58 169.58 165.47
250 x 125 XX 323 508 268.30 268.30 263.40 XX 322 508 254.40 254.40 220.00
** Replace XX with material/ 250 x 180 XX 323 529 376.50 376.50 227.70 XX 322 529 356.00 356.00 227.70
colour required: 315 x 250 XX 323 543 415.90 415.90 317.90 XX 322 543 376.50 376.50 306.50
40 = PE100 Black 315 x 280 XX 323 545 647.50 647.50 - XX 322 545 514.90 514.90 -
41 = PE100 Blue 355 x 125 XX 323 571 P.O.A. P.O.A. P.O.A. XX 322 571 P.O.A. P.O.A. P.O.A.
58 = PE80 Yellow
355 x 180 XX 323 532 989.50 989.50 P.O.A. XX 322 532 P.O.A. P.O.A. P.O.A.
355 x 225 XX 323 541 1,597.00 1,597.00 - XX 322 541 1,404.00 1,404.00 -
355 x 250 XX 323 544 1,559.00 1,559.00 1,058.00 XX 322 544 1,366.00 1,366.00 988.70
355 x 280 XX 323 546 1,533.00 1,533.00 - XX 322 546 1,307.00 1,307.00 -
355 x 315 XX 323 547 1,472.00 1,472.00 1,461.00 XX 322 547 1,230.00 1,230.00 585.30
400 x 180 XX 323 560 P.O.A. P.O.A. P.O.A. XX 322 560 653.80 653.80 P.O.A.
400 x 250 XX 323 563 2222.67 2222.67 2,383.00 XX 322 563 2,154.00 2,154.00 268.80
400 x 280 XX 323 564 2,290.00 2,290.00 - XX 322 564 993.00 993.00 -
400 x 315 XX 323 565 2,204.00 2,204.00 2,202.00 XX 322 565 1,787.00 1,787.00 629.20
400 x 355 XX 323 566 1,745.00 1,747.00 1,754.00 XX 322 566 1,436.00 1,436.00 737.30
450 x 250 XX 323 573 P.O.A. P.O.A. P.O.A. XX 322 573 P.O.A. P.O.A. P.O.A.
450 x 280 XX 323 584 2,541.00 2,541.00 - XX 322 584 2,250.00 2,250.00 -
450 x 315 XX 323 574 2,332.00 2,332.00 2,403.00 XX 322 574 2,165.00 2,165.00 2,156.00
450 x 355 XX 323 575 2,369.00 2,369.00 2,291.00 XX 322 575 2,023.00 2,023.00 2,018.00
450 x 400 XX 323 576 2,235.00 2,235.00 2,167.00 XX 322 576 1,905.00 1,905.00 1,899.00
500 x 355 XX 323 579 3,231.00 3,231.00 3,132.89 XX 322 579 2,965.00 2,965.00 2,962.00
500 x 400 XX 323 580 3,006.00 3,006.00 2,915.90 XX 322 580 2,583.00 2,583.00 2,579.00
500 x 450 XX 323 581 2,644.00 2,644.00 2,564.00 XX 322 581 2,149.00 2,149.00 2,151.00
560 x 450 XX 323 586 3,812.00 3,812.00 - XX 322 586 2,727.00 2,727.00 2,717.00
560 x 500 XX 323 594 2,956.00 2,956.00 - XX 322 589 2,469.00 2,469.00 2,732.80
630 x 500 XX 323 599 4,655.00 4,655.00 - XX 322 594 3,333.00 3,333.00 4,500.50
630 x 560 XX 323 595 4,264.00 4,264.00 - XX 322 595 3,049.00 3,050.00 3,404.80
710 x 630 XX 323 597 P.O.A. P.O.A. - XX 322 597 P.O.A. 2,161.90 -
SDR 17.6 is available in Yellow only.

Blue pupped fittings may include black moulding component, pupped with blue pipe.

68
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 69

PUPPED FITTINGS
Reducers

Size B L SDR11 SDR17/17.6


(mm) (mm) (mm) Weight (kg) Weight (kg)

90 x 63 1160 500 1.9 1.3


110 x 90 1190 500 3.1 2.1
125 x 63 1220 500 3.2 2.2
125 x 90 1200 500 3.8 2.6
160 x 90 1240 500 5.5 3.9
160 x 110 1240 500 6.2 4.2
160 x 125 1230 500 6.7 4.6
180 x 90 1440 500 6.1 4.2
180 x 125 1240 500 7.9 5.4
200 x 160 1235 500 10.8 7.4
225 x 160 1298 500 13.0 8.9
250 x 125 1530 500 13.5 9.3
250 x 180 1290 500 16.0 11.5
315 x 250 1330 500 28.0 20.0
315 x 280 1222 500 28.2 19.1
355 x 125 1563 500 25.9 19.2
355 x 180 1420 500 27.2 19.9
355 x 225 1245 500 27.4 20.2
355 x 250 1245 500 28.6 20.9
355 x 280 1245 500 30.3 21.9
355 x 315 1245 500 32.6 23.4
400 x 180 1435 500 33.6 22.8
400 x 250 1260 500 35.0 23.8
400 x 280 1260 500 36.7 25.1
400 x 315 1260 500 38.5 26.1
400 x 355 1260 500 41.5 28.2
450 x 250 2460 1000 81.2 55.0
450 x 280 2230 1000 80.9 55.0
450 x 315 2230 1000 85.3 57.8
450 x 355 2230 1000 91.6 62.1
450 x 400 2230 1000 99.5 67.3
500 x 355 2230 1000 107.1 72.7
500 x 400 2230 1000 115.0 78.3
500 x 450 2200 1000 124.2 84.0
560 x 450 2200 1000 145.0 98.1
560 x 500 2200 1000 155.6 105.4
630 x 500 2200 1000 183.4 124.3
630 x 560 2200 1000 196.6 133.1
710 x 630 2230 1000 - 170.1

Note: Dimensions of pupped fittings should be used subject to a +/ 5mm tolerance due to the nature of the fabrication process.
Note: Additional bespoke large diameter fabricated fittings are available to order - please contact our Sales Office for further information.

69
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 70

PUPPED FITTINGS
90 Elbows

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 XX 309 313 75.80 75.80 75.80 XX 308 313 62.00 62.00 62.00
110 XX 309 314 87.90 87.90 - XX 308 314 72.00 72.00 -
125 XX 309 315 124.80 124.80 124.80 XX 308 315 101.80 101.80 101.80
160 XX 309 317 124.80 124.80 - XX 308 317 178.10 178.10 -
180 XX 309 318 335.80 335.80 335.80 XX 308 318 274.70 274.70 274.70
200 XX 309 319 335.80 335.80 - XX 308 319 295.00 295.00 -
225 XX 309 320 418.40 418.40 - XX 308 320 347.20 347.20 -
250 XX 309 321 492.10 492.10 492.10 XX 308 321 405.80 405.80 405.80
280 XX 309 322 643.40 643.40 - XX 308 322 557.50 557.50 -
315 XX 309 323 1,006.90 1,006.90 1,006.90 XX 308 323 822.90 822.90 822.90
355 XX 309 324 1,328.70 1,328.70 1,328.70 XX 308 324 1,208.10 1,208.10 1,208.10

SDR 17.6 is available in Yellow only.


L

Z Size L Z SDR11 SDR17/17.6


(mm) (mm) (mm) Weight (kg) Weight (kg)

** Replace XX with material/ 90 500 629 2.6 1.9


colour required: 110 500 670 4.3 2.9
40 = PE100 Black 125 500 660 5.4 3.8
41 = PE100 Blue 160 500 720 9.2 6.5
58 = PE80 Yellow 180 500 720 12.1 8.2
200 500 741 15.4 10.5
225 500 768 19.4 14.0
250 500 900 22.4 15.6
280 500 840 30.3 20.2
315 500 920 39.2 25.9
355 500 880 53.5 35.0

Blue pupped fittings may include black moulding component, pupped with blue pipe.

70
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 71

PUPPED FITTINGS
45 Elbows

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 XX 315 313 73.90 73.90 73.90 XX 314 313 59.20 59.20 59.20
110 XX 315 314 96.10 96.10 - XX 314 314 75.80 75.80 -
125 XX 315 315 106.30 106.30 106.30 XX 314 315 91.10 91.10 91.10
160 XX 315 317 181.90 181.90 - XX 314 317 159.10 159.10 -
180 XX 315 318 242.90 242.90 242.90 XX 314 318 211.20 211.20 211.20
200 XX 315 319 276.00 276.00 - XX 314 319 242.90 242.90 -
225 XX 315 320 314.20 314.20 - XX 314 320 273.40 273.40 -
250 XX 315 321 387.90 387.90 387.90 XX 314 321 335.80 335.80 335.80
280 XX 315 322 585.00 585.00 - XX 314 322 459.10 459.10 -
L 315 XX 315 323 580.00 580.00 580.00 XX 314 323 605.70 605.70 605.70
355 XX 315 324 1,862.90 1,862.90 1,862.90 XX 314 324 776.90 776.90 776.90
Z
SDR 17.6 is available in Yellow only.

** Replace XX with material/


colour required: Size L Z SDR11 SDR17/17.6
40 = PE100 Black (mm) (mm) (mm) Weight (kg) Weight (kg)
41 = PE100 Blue
58 = PE80 Yellow 90 500 595 2.5 1.7
110 500 607 3.9 2.7
125 500 616 5.1 3.7
160 500 635 8.6 6.0
180 500 660 11.1 7.7
200 500 672 13.8 9.3
225 500 685 17.8 12.1
250 500 750 24.3 16.8
280 500 750 31.6 22.1
315 500 795 39.1 28.2
355 500 620 105.1 69.6

Note: Dimensions of pupped fittings should be used subject to a +/ 5mm tolerance due to the nature of the fabrication process.
Note: Additional bespoke large diameter fabricated fittings are available to order - please contact our Sales Office for further information.

71
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 72

PUPPED FITTINGS
Equal Tee

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 XX 321 313 97.40 97.40 82.80 XX 320 313 80.20 80.20 82.80
110 XX 321 314 135.00 135.00 - XX 320 314 110.00 110.00 -
125 XX 321 315 179.40 179.40 156.50 XX 320 315 147.60 147.60 147.60
160 XX 321 317 270.90 270.90 - XX 320 317 263.40 263.40 -
180 XX 321 318 335.80 335.80 286.20 XX 320 318 281.00 281.00 282.30
200 XX 321 319 654.90 654.90 - XX 320 319 637.80 637.80 -
225 XX 321 320 975.90 975.90 - XX 320 320 922.40 922.40 -
L 250 XX 321 321 1,162.10 1,162.10 1,176.00 XX 320 321 1,120.30 1,120.30 1,123.50
Z 280 XX 321 322 1,593.30 1,593.30 - XX 320 322 1,518.40 1,518.40 -
L L 315 XX 321 323 1,889.70 1,889.70 2,028.80 XX 320 323 1,687.40 1,687.40 1,940.00
355 XX 321 324 2,300.50 2,300.50 2,105.40 XX 320 324 2,206.40 2,206.40 2,021.30
400 XX 321 325 2,659.00 2,659.00 2,509.20 XX 320 325 2,521.00 2,521.00 2,407.50
B
SDR 17.6 is available in Yellow only.

** Replace XX with material/


colour required: Size L B Z SDR11 SDR17/17.6
40 = PE100 Black (mm) (mm) (mm) (mm) Weight (kg) Weight (kg)
58 = PE80 Yellow
90 500 1310 656 4.1 3.0
110 500 1326 670 6.4 4.6
125 500 1372 687 8.4 6.2
160 500 1419 708 14.1 9.8
180 500 1509 765 19 13.6
200 500 1500 750 24.2 17.0
225 500 1550 775 30.7 22.5
250 500 1540 840 34.7 24.2
280 500 1680 840 47.8 31.8
315 500 1820 910 60.2 40.6
355 500 1690 845 81.1 54.9
400 500 1722 860 101.6 69.7

Blue pupped fittings may include black moulding component, pupped with blue pipe.

72
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 73

PUPPED FITTINGS
Large Diameter Equal Tee

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

450 XX 321 326 P.O.A. P.O.A. P.O.A. XX 320 326 P.O.A. P.O.A. P.O.A.
500 XX 321 327 - - - XX 320 327 P.O.A. P.O.A. P.O.A.
560 XX 321 328 P.O.A. P.O.A. P.O.A. XX 320 328 P.O.A. P.O.A. P.O.A.
630 XX 321 329 P.O.A. P.O.A. P.O.A. XX 320 329 P.O.A. P.O.A. P.O.A.
710 XX 321 330 P.O.A. P.O.A. P.O.A. XX 320 330 P.O.A. P.O.A. -
800 - - - - XX 320 332 P.O.A. P.O.A. -
900 - - - - XX 320 333 P.O.A. P.O.A. -
1000 - - - - XX 320 334 P.O.A. P.O.A. -
L1
Z2 1200 - - - - XX 320 335 P.O.A. P.O.A. -

L2 = Available leg length, standard = 1.0m for 450mm to 1200mm sizes.


Z1
Larger sizes and different SDRs and other configurations including flanged branches are available, please contact our Sales Office for further
information. Dimensions are approximate and given as a guide only.
L2
SDR 17.6 is available in Yellow only.

** Replace XX with material/


colour required: Size Z1 Z2 L1 SDR11 SDR17/17.6
40 = PE100 Black (mm) (mm) (mm) (mm) Weight (kg) Weight (kg)
41 = PE100 Blue
58 = PE80 Yellow 450 450 1450 1000 289 237
500 475 1475 1000 369 306
630 540 1540 1000 629 527

Note: Dimensions of pupped fittings should be used subject to a +/ 5mm tolerance due to the nature of the fabrication process.
Note: Additional bespoke large diameter fabricated fittings are available to order - please contact our Sales Office for further information.

73
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 74

PUPPED FITTINGS
Large Diameter Reduced Branch Tees

Size (mm) SDR 11** Each Each Each SDR 17/17.6** Each Each Each
d1 x d2 Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

450 x 180 XX 349 326 P.O.A. P.O.A. P.O.A. XX 358 326 P.O.A. P.O.A. P.O.A.
450 x 250 XX 335 326 P.O.A. P.O.A. P.O.A. XX 336 326 P.O.A. P.O.A. P.O.A.
450 x 315 - - - - XX 285 326 P.O.A. P.O.A. P.O.A.
500 x 180 XX 349 327 P.O.A. P.O.A. P.O.A. XX 358 327 P.O.A. P.O.A. P.O.A.
500 x 250 XX 335 327 P.O.A. P.O.A. P.O.A. XX 336 327 P.O.A. P.O.A. P.O.A.
500 x 315 - - - - XX 285 327 P.O.A. P.O.A. P.O.A.
d2 630 x 180 XX 349 329 P.O.A. P.O.A. P.O.A. XX 358 329 P.O.A. P.O.A. P.O.A.
630 x 250 XX 335 329 P.O.A. P.O.A. P.O.A. XX 336 329 P.O.A. P.O.A. P.O.A.
L1
Z2 630 x 315 - - - - XX 285 329 P.O.A. P.O.A. P.O.A.
Z1
d1 L2 = Available leg length, standard = 1.0m for 450mm to 800mm sizes.
Larger sizes and different SDRs and other configurations including flanged branches are available, please contact our Sales Office for further
L2 information. Dimensions are approximate and given as a guide only.
SDR 17.6 is available in Yellow only.

** Replace XX with material/


colour required: Size (mm) Z1 Z2 L1 SDR11 SDR17/17.6
40 = PE100 Black d1 x d2 (mm) (mm) (mm) Weight (kg) Weight (kg)
41 = PE100 Blue
58 = PE80 Yellow 450 x 180 450 950 500 149 113
450 x 250 450 950 500 170 133
450 x 315 450 950 500 197 158
500 x 180 475 975 500 180 136
500 x 250 475 975 500 201 156
500 x 315 475 975 500 229 183
630 x 180 540 1040 500 275 206
630 x 250 540 1040 500 300 230
630 x 315 540 1040 500 331 260

Blue pupped fittings may include black moulding component, pupped with blue pipe.

74
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 75

PUPPED FITTINGS
Reduced Branch Tees

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

110" XX 347 314 184.50 184.50 - XX 356 314 145.00 145.00 -


125 XX 347 315 184.50 184.50 225.20 XX 356 315 180.70 180.70 179.40
160 XX 347 317 283.60 283.60 - XX 356 317 316.80 316.80 -
180 XX 347 318 359.90 359.90 389.20 XX 356 318 351.00 351.00 351.00
Branch
90mm

200 XX 347 319 P.O.A. P.O.A. - XX 356 319 437.65 437.65 -


225 - - - - XX 356 320 679.50 679.50 -
250 XX 347 321 1,312.90 1,312.90 1,362.20 XX 356 321 1,195.20 1,195.20 1,303.30
L 280 XX 347 322 1,790.20 1,790.20 - XX 356 322 1,716.30 1,716.30 -
Z 315 XX 347 323 2,204.20 2,204.20 2,343.30 XX 356 323 2,004.20 2,004.20 2,243.80
L L
355 XX 347 324 P.O.A. P.O.A. - XX 356 324 3,700.10 3,700.10 2,744.60
180" XX 348 318 446.30 446.30 398.10 XX 357 318 358.60 358.60 358.60
200 XX 348 319 P.O.A. P.O.A. - XX 357 319 736.00 736.00 -
225 - - - - XX 357 320 774.70 774.70 805.80
B
125mm
Branch

250 XX 348 321 1,269.10 1,269.10 1,362.20 XX 357 321 1,136.40 1,136.40 1,139.60
280 XX 348 322 1,790.20 1,790.20 - XX 357 322 1,716.30 1,716.30 -
** Replace XX with material/colour 315 XX 348 323 2,021.30 2,021.30 2,343.30 XX 357 323 1,945.30 1,945.30 2,243.80
required: 355 XX 348 324 P.O.A. P.O.A. - XX 357 324 3,840.30 3,840.30 2,492.10
58 = PE80 Yellow 400 XX 348 325 P.O.A. P.O.A. - XX 357 325 P.O.A. P.O.A. P.O.A.
40 = PE100 Black 225 - - - - XX 358 320 774.70 774.70 805.80
41 = PE100 Blue 250 XX 349 321 1,248.70 1,248.70 1,278.70 XX 358 321 1,136.40 1,136.40 1,224.10
180mm
Branch

280 XX 349 322 1,790.20 1,790.20 - XX 358 322 1,716.30 1,716.30 -


315 XX 349 323 1,981.70 1,981.70 2,249.20 XX 358 323 1,836.20 1,836.20 2,152.90
355 XX 349 324 2,396.80 P.O.A. - XX 358 324 3,382.30 3,382.30 P.O.A.
400 XX 349 325 P.O.A. P.O.A. - XX 358 325 P.O.A. P.O.A. P.O.A.
315" XX 335 323 1,535.50 1,535.50 2,069.40 XX 336 323 1,318.30 1,318.30 1,731.30
250mm
Branch

355 XX 335 324 3,202.60 3,202.60 2,200.00 XX 336 324 3,001.40 3,001.40 2,249.20
400 XX 335 325 P.O.A. P.O.A. - XX 336 325 P.O.A. P.O.A. P.O.A.

SDR 17.6 is available in Yellow only.

Size L B Z SDR11 SDR17/17.6


(mm) (mm) (mm) (mm) Weight (kg) Weight (kg)

110 500 1326 850 10.5 4.7


125 500 1372 875 8.0 5.6
160 500 1419 1120 8.3 5.4
180 500 1509 1180 17.9 12.5
90mm Branch

200 500 1480 1232 16.7 22.6


225 500 1550 1550 21.2 13.7
250 500 1430 1440 33.8 21.7
280 500 1600 980 58.7 38.0
315 500 1530 1820 62.5 43.8
355 500 1690 1910 76.3 49.4
400 500 1895 2165 104 77.8
180 500 1509 990 18.3 12.8
200 500 1480 1262 17.7 24.5
125mm Branch

225 500 1450 1270 33.0 21.5


250 500 1430 1240 34.1 23.9
280 500 1600 1680 60.6 39.2
315 500 1530 1620 62.9 44.1
355 500 1690 1290 52.0 49.7
400 500 1895 2195 106.0 79.0
225 500 1550 960 35.9 23.2
180mm Branch

250 500 1430 1000 34.7 24.2


280 500 1600 1170 61.0 39.5
315 500 1530 1380 63.4 44.4
355 500 1690 1160 66.0 50.0
Note: Dimensions of pupped fittings should be 400 500 1895 1941 105.0 78.0
used subject to a +/ 5mm tolerance due to the 315 500 1530 1200 63.4 44.6
250mm

nature of the fabrication process. 355 500 1690 975 84.0 50.3
400 500 1895 1680 109.0 81.0
Note: Additional bespoke large diameter
fabricated fittings are available to order - please
contact our Sales Office for further information.

75
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 76

PUPPED FITTINGS
Stub Flange Assemblies

Size (mm) SDR 11** Each Each Each SDR 17/17.6** Each Each Each
d1 x d2 Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

63 x 50* XX 327 311 75.30 75.30 82.50 - - - -


90 x 80 XX 327 313 88.90 88.90 96.70 XX 326 313 90.70 90.70 93.40
110 x 100 XX 327 314 104.50 104.50 - XX 326 314 103.20 103.20 -
125 x 100 XX 327 315 117.30 117.30 126.40 XX 326 315 116.00 116.00 117.30
125 x 150 58 327 505 - - 305.90 - - - -
160 x 150 XX 327 317 163.30 163.30 - XX 326 317 164.60 164.60 -
t 180 x 150 XX 327 318 238.40 238.40 270.90 XX 326 318 211.20 211.20 238.40
200 x 200 XX 327 319 274.60 274.60 - XX 326 319 301.90 301.90 -
225 x 200 XX 327 320 297.90 297.90 - XX 326 320 342.10 342.10 -
250 x 250 XX 327 321 555.90 555.90 656.20 XX 326 321 480.50 480.50 506.50
280 x 250 XX 327 322 P.O.A. 663.90 - XX 326 322 594.10 594.10 -
315 x 300 XX 327 323 711.80 711.80 860.10 XX 326 323 631.20 631.20 704.20
L 355 x 350 XX 327 324 P.O.A. 1,118.40 - XX 326 324 990.90 990.90 816.50
400 x 400 XX 327 325 P.O.A. P.O.A. - XX 326 325 1,292.80 1,292.80 963.60
B
450 x 450 XX 327 326 P.O.A. P.O.A. - XX 326 326 1,472.60 1,472.60 -
500 x 500 XX 327 327 P.O.A. P.O.A. - XX 326 327 1,608.90 1,608.90 -
** Replace XX with material/ 560 x 600 XX 327 328 P.O.A. P.O.A. - XX 326 328 1,890.10 1,890.10 -
colour required: 630 x 600 XX 327 329 P.O.A. P.O.A. - XX 326 329 2,522.30 2,522.30 2,523.40
40 = PE100 Black 710 x 700 XX 327 330 P.O.A. P.O.A. - XX 326 330 P.O.A. P.O.A. -
41 = PE100 Blue
800 x 800 - - - - XX 326 332 P.O.A. P.O.A. -
58 = PE80 Yellow
900 x 900 - - - - XX 326 333 P.O.A. P.O.A. -
1000 x 1000 - - - - XX 326 334 P.O.A. P.O.A. -
1200 x 1200 - - - - XX 326 335 P.O.A. P.O.A. -

With backing ring drilled to BS EN 1092-1:2007 Table 13.


L = Available leg length, standard = 0.5m for 90mm to 400mm sizes, 1.0m for 450mm to 1200mm sizes.
SDR 17.6 is available in Yellow only.

All sizes of (58) Yellow supplied with a nitrile gasket.


Other lengths (B) and SDRs are available - please contact our Sales office for further information.

*PE80 only.

t t
Size (mm) B SDR11 SDR17/17.6
SDR11 SDR17/17.6
d1 x d2 (mm) Weight (kg) Weight (kg)
(mm) (mm)
63 x 50 575 14 - 1.4 -
90 x 80 630 17 17 2.7 1.9
110 x 100 630 18 18 3.7 2.6
125 x 100 675 25 25 4.5 3.2
125 x 150 675 25 25 6.5 3.4
160 x 150 675 25 25 7.9 5.5
180 x 150 675 30 30 8.8 6.2
200 x 200 675 32 32 11.4 8
225 x 200 675 32 32 12.9 9
250 x 250 675 35 35 18.5 13
280 x 250 602 35 29 20.7 14.1
315 x 300 575 35 35 25.5 18
355 x 350 610 41 30 32.6 26.6
400 x 400 610 47 34 41 34.2
450 x 450 1110 52 47 87.5 69.9
500 x 500 1110 61 47 105.6 84.7
560 x 600 1110 60 51 131.7 109.9
630 x 600 1110 61 51 144 129
710 x 700 1110 - 50 - 139
800 x 800 1110 - 52 - 182
900 x 900 1110 - 55 - 222
1000 x 1000 1130 - 60 - 280
1200 x 1200 1180 - 90 - 428

Blue pupped fittings may include black moulding component, pupped with blue pipe.

76
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 77

PUPPED FITTINGS
Flanged Short Branch Tees

Size (mm) SDR 11** Each Each Each SDR 17/17.6** Each Each Each
d1 x d2 Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 x 80 XX 341 313 177.60 177.60 151.7 XX 310 313 154.30 154.30 145.10
110 x 80 XX 341 314 225.50 225.50 - XX 310 314 184.00 184.00 -
125 x 80 XX 341 315 255.30 255.30 274.6 XX 310 315 213.80 209.90 273.30
160 x 80 XX 341 317 505.20 505.20 - XX 310 317 369.20 369.20 -
180 x 80 XX 341 318 423.60 423.60 461.2 XX 310 318 349.70 349.70 439.20
200 x 80 XX 341 319 780.78 780.78 - XX 310 319 759.80 759.80 -
225 x 80 XX 341 320 820.80 820.80 - XX 310 320 609.40 609.40 -
L L 250 x 80 XX 341 321 1,963.10 1,963.10 1247 XX 310 321 1,608.90 1,608.90 1,056.30
Z
280 x 80 XX 341 322 1,988.20 1,988.20 - XX 310 322 1,907.50 1,907.50 -
315 x 80 XX 341 323 P.O.A. P.O.A. 2207.3 XX 310 323 P.O.A. P.O.A. 2,155.00
90 x 100 XX 342 313 184.00 184.00 - XX 311 313 176.30 176.30 -
B
110 x 100 XX 342 314 225.50 225.50 - XX 311 314 212.50 212.50 -
125 x 100 XX 342 315 281.20 281.20 241 XX 311 315 236.30 232.00 232.00
** Replace XX with material/ 160 x 100 XX 342 317 382.20 382.20 - XX 311 317 313.50 313.50 -
colour required: 180 x 100 XX 342 318 581.00 581.00 481.8 XX 311 318 422.30 422.30 318.80
40 = PE100 Black 200 x 100 XX 342 319 640.37 640.37 - XX 311 319 593.30 593.30 -
41 = PE100 Blue 225 x 100 XX 342 320 669.30 669.30 - XX 311 320 589.70 589.70 -
58 = PE80 Yellow 250 x 100 XX 342 321 842.60 842.60 913.5 XX 311 321 635.50 635.50 945.10
280 x 100 XX 342 322 1,987.10 1,987.10 - XX 311 322 1,907.50 1,907.50 -
315 x 100 XX 342 323 1,834.50 1,834.50 2007.8 XX 311 323 1,510.80 1,510.80 2,065.60
355 x 100 XX 342 324 2,541.90 2,541.90 - XX 311 324 2,383.90 2,383.90 -
L = Available leg length, standard = 160 x 150 XX 343 317 436.60 436.60 - XX 312 317 406.80 406.80 -
0.5m for 90mm to 400mm sizes, 1.0m 180 x 150 XX 343 318 492.20 492.20 418.4 XX 312 318 404.20 404.20 459.90
for 450mm to 800mm sizes. 200 x 150 XX 343 319 698.77 698.77 - XX 312 319 576.58 576.58 -
225 x 150 XX 343 320 744.50 744.50 - XX 312 320 607.20 607.20 -
Flanged Branch PN16. SDR 17.6 is
250 x 150 XX 343 321 873.10 873.10 982.1 XX 312 321 712.90 712.90 928.70
available in Yellow only.
315 x 150 XX 343 323 1,866.10 1,866.10 2100.5 XX 312 323 1,532.60 1,532.60 2,048.20
Drilled to BS EN 1092-1:2007 Table 13. 355 x 150 XX 343 324 2,541.90 2,541.90 - XX 312 324 2,383.90 2,383.90 - -

Larger sizes and other SDRs may be


Size (mm) B Z SDR11 SDR17/17.6
available to order - please contact our
Sales Office for further information. d1 x d2 (mm) (mm) Weight (kg) Weight (kg)

90 x 80 1310 165 4.70 3.40


110 x 80 1326 289 5.10 3.70
125 x 80 1372 260 8.40 5.70
160 x 80 1419 330 9.20 6.20
180 x 80 1509 335 17.80 11.70
200 x 80 1480 858 24.5 18.70
225 x 80 1550 492 22.30 14.50
250 x 80 1430 580 32.00 20.60
280 x 80 1692 1140 47.00 30.00
315 x 80 1530 740 54.00 34.50
90 x 100 1310 240 5.50 3.30
110 x 100 1326 175 5.10 3.80
125 x 100 1372 215 8.40 5.80
160 x 100 1419 332 10.80 7.40
180 x 100 1509 290 17.80 11.80
200 x 100 1480 941 26.1 19.6
225 x 100 1550 494 22.50 14.70
250 x 100 1430 520 32.00 20.70
280 x 100 1692 1142 48.00 31.00
315 x 100 1530 680 64.50 37.70
355 x 100 1955 1515 73.00 43.00
160 x 150 1419 340 12.80 9.10
180 x 150 1509 230 18.60 12.70
200 x 150 1480 703 28.00 21.90
225 x 150 1550 363 24.30 16.30
250 x 150 1430 410 33.00 21.80
315 x 150 1530 570 65.00 38.80
355 x 150 1955 1058 74.00 44.00

Note: Dimensions of pupped fittings should be used subject to a +/ 5mm tolerance due to the nature of the fabrication process.
Note: Additional bespoke large diameter fabricated fittings are available to order - please contact our Sales Office for further information.

77
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 78

PUPPED FITTINGS
SlimFlange Assemblies

SDR
Size (mm) SDR 11** Each Each Each Each
17/17.6**
d1 x d2 Code 40 Black 41 Blue 41 Blue 58 Yellow
Code
250 x 200 XX 453 321 423.60 423.60 XX 452 321 378.30 378.30
315 x 250 XX 453 323 597.00 597.00 XX 452 323 535.00 535.00
355 x 300 XX 453 324 932.00 932.00 XX 452 324 880.80 880.80
400 x 350 XX 453 325 1,236.10 1,236.10 XX 452 325 1,182.70 1,182.70
450 x 400 XX 453 326 1,722.20 1,722.20 XX 452 326 1,588.20 1,588.20
500 x 450 XX 453 327 1,865.00 1,865.00 XX 452 327 1,760.40 1,760.40
t
560 x 500 XX 453 328 2,525.60 2,329.40 XX 452 328 2,255.30 2,255.30

SlimFlange Assemblies comprise of SlimFlange, galvanised mild steel backing ring and full faced gasket.
L = Available leg length, standard = 0.5m for 90mm to 400mm sizes, 1.0m for 450mm to 800mm sizes.
SDR17.6 available in Yellow only.

The SlimFlange is a unique product and allows size-for-size connection of a PE pipeline to a metal flange
L without loss of nominal bore. It is only sold as a complete assembly. Bolt kits are not supplied in the
B assembly. However, it is recommended that, to achieve the best performance, bolt kits with washers of type
form A (normal range) as per BS4320 are used.
** Replace XX with material/
colour required:
For other SDRs and drillings please contact our Sales Office for further information.
41 = PE100 Blue
Additional SlimFlanges for the UK gas market can be found on page 17.
58 = PE80 Yellow

t t SDR11 SDR17/17.6
Size (mm) L B
SDR11 SDR17/17.6 Weight Weight
d1 x d2 (mm) (mm)
(mm) (mm) (kg) (kg)
250 x 200 500 610 31 27 9.00 8.00
315 x 250 500 610 35 30 - 12.00
355 x 300 500 610 40 35 21.00 19.00
400 x 350 500 610 44 38 31.00 29.00
450 x 400 1000 1110 49 42 38.00 35.00
500 x 450 1000 1110 53 45 47.00 43.00
560 x 500 1000 1110 59 50 58.00 53.00

SlimFlange Backing Ring (For dimensional purpose only - not for sale individually)

Size (mm) A B C D PCD P No of Weight


SDR
d1 x d2 (mm) (mm) (mm) (mm) (mm) Holes (kg)

250 x 200 17.6/17/11 340 12.5 252 22 295 12 3.5


*315 x 250 17.6/17/11 405 15.0 317 22 359 12 5.2
355 x 300 17.6/17/11 460 20.0 358 26 410 12 9.0
400 x 350 17.6/17/11 520 24.5 403 26 470 16 14.6
450 x 400 17.6/17/11 580 24.5 453 30 525 16 17.1
500 x 450 17.6/17/11 640 24.5 504 30 585 20 20.2
560 x 500 17.6/17/11 715 24.5 564 33 650 20 25.1

The 315 x 250PN16 SlimFlange requires 20mm diameter bolts rather than the standard 24mm
1 The first size refers to the outside diameter of the PE pipe and the second to the nominal bore of
the ductile iron pipe or fitting.
C A P

Drilled to BS EN 1092-1:2007 Table 13


D

Blue pupped fittings may include black moulding component, pupped with blue pipe.

78
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 79

PUPPED FITTINGS
Special Flange Assemblies PN16

SDR
Size (mm) SDR 11** Each Each Each Each
17/17.6**
d1 x d2 Code 40 Black 41 Blue 40 Black 41 Blue
Code
630 x 500 XX 456 329 P.O.A. P.O.A. XX 455 329 P.O.A. P.O.A.
710 x 600 XX 456 330 P.O.A. P.O.A. XX 455 330 P.O.A. P.O.A.
800 x 700 - - - XX 455 332 P.O.A. P.O.A.
900 x 800 - - - XX 455 333 P.O.A. P.O.A.
1000 x 900 - - - XX 455 334 P.O.A. P.O.A.
1200 x 1000 - - - XX 455 335 P.O.A. P.O.A.

1
The first size refers to the outside diameter of the PE pipe and the second to the nominal bore of the ductile
iron pipe or fitting.

Drilled to BS EN 1092-1:2007 Table 13.

SDR11 SDR17/17.6
Size (mm) L Z hF
Weight Weight
d1 x d2 (mm) (mm) (mm)
(kg) (kg)
630 x 500 1000 1560 108 608 164
710 x 600 1000 1350 120 758 258
800 x 700 1000 1390 135 - 335
900 x 800 1000 1390 149 - 432
1000 x 900 1000 1400 164 - 519
1200 x 1000 1000 1440 180 - 666

End Caps

Size SDR 11** Each Each Each SDR 17/17.6** Each Each Each
(mm) Code 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue 58 Yellow

90 XX 332 313 34.35 34.35 34.35 XX 331 313 31.40 31.40 31.40
125 XX 332 315 68.90 68.90 68.90 XX 331 315 62.80 62.80 62.80
180 XX 332 318 113.40 113.40 113.40 XX 331 318 103.10 103.10 103.10
250 XX 332 321 212.40 212.40 212.40 XX 331 321 193.40 193.40 193.40
315 XX 332 323 424.70 424.70 424.70 XX 331 323 386.60 386.60 386.60
355 XX 332 324 504.90 504.90 504.90 XX 331 324 459.10 459.10 459.10
Z
L = Available leg length, standard = 0.5m for 90mm to 400mm sizes, 1.0m for 450mm to 800mm sizes. SDR17.6 available in Yellow only.

SDR11 SDR17/17.6
Size Z
L Weight Weight
(mm) (mm)
(kg) (kg)
90 110 2.4 1.6
125 130 4.7 3.2
180 160 9.9 6.7
250 200 20 13.4
315 260 33 22.0
355 290 43 29.0

Note: Dimensions of pupped fittings should be used subject to a +/ 5mm tolerance due to the nature of the fabrication process.
Note: Additional bespoke large diameter fabricated fittings are available to order - please contact our Sales Office for further information.

79
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 80

PUPPED FITTINGS
90 Mitred Elbow

SDR
Size SDR 11** Each Each Each Each Each Each SDR 21** Each Each
17/17.6**
(mm) Code 40 Black 41 Blue 58 Yellow 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue
Code
90 XX 244 313 85.40 85.40 89.70 XX 243 313 68.40 68.40 71.80 XX 248 313 - -
110 XX 244 314 96.10 96.10 101.00 XX 243 314 79.10 79.10 83.00 XX 248 314 - -
125 XX 244 315 136.70 136.70 143.50 XX 243 315 111.70 111.70 117.20 XX 248 315 - -
160 XX 244 317 214.90 214.90 225.70 XX 243 317 195.90 195.90 205.70 XX 248 317 170.50 170.50
180 XX 244 318 371.40 371.40 390.10 XX 243 318 302.80 302.80 317.80 XX 248 318 239.40 239.40
225 XX 244 320 438.30 438.30 460.30 XX 243 320 382.50 382.50 401.50 XX 248 320 313.60 313.60
L 250 XX 244 321 543.60 543.60 570.80 XX 243 321 447.00 447.00 469.40 XX 248 321 363.40 363.40
280 XX 244 322 819.70 819.70 861.40 XX 243 322 682.70 682.70 716.90 XX 248 322 554.30 554.30
315 XX 244 323 1,112.80 1,112.80 1,168.50 XX 243 323 907.40 907.40 952.30 XX 248 323 713.70 713.70
355 XX 244 324 1,170.60 1,170.60 1,229.50 XX 243 324 1,017.60 1,017.60 1,069.00 XX 248 324 820.70 820.70
400 XX 244 325 1,410.30 1,410.30 1,480.90 XX 243 325 1,226.30 1,226.30 1,287.30 XX 248 325 1,012.00 1,012.00
450 XX 244 326 1,572.90 1,572.90 1,651.10 XX 243 326 1,367.50 1,367.50 1,436.00 XX 248 326 1,078.00 1,078.00
Z
500 XX 244 327 1,860.80 1,860.80 1,952.80 XX 243 327 1,617.90 1,617.90 1,698.10 XX 248 327 1,353.00 1,353.00
R 560 XX 244 328 2,027.70 2,027.70 2,129.30 XX 243 328 1,762.30 1,762.30 1,851.10 XX 248 328 1,665.00 1,665.00
630 XX 244 329 2,346.60 2,346.60 2,463.20 XX 243 329 2,040.50 2,040.50 2,142.20 XX 248 329 3,474.00 1,777.00
710 XX 244 330 P.O.A. P.O.A. - XX 243 330 2,349.80 P.O.A. - XX 248 330 2,192.00 2,192.00
800 - - - - XX 243 332 P.O.A. P.O.A. - XX 248 332 P.O.A. P.O.A.
900 - - - - XX 243 333 P.O.A. P.O.A. - XX 248 333 P.O.A. P.O.A.
1000 - - - - XX 243 334 P.O.A. P.O.A. - XX 248 334 P.O.A. P.O.A.
1200 - - - - XX 243 335 P.O.A. P.O.A. - XX 248 335 P.O.A. P.O.A.

** Replace XX with material/ L = Available leg length, standard = 0.5m for 90mm to 400mm sizes, 1.0m for 450mm to 1200mm sizes. We can suppply longer legs for some
colour required: butt-fusion machines or shorter (long spigot) for electrofusion. R = Radius of curvature = approx 1.5 x D (the pipe size)
40 = PE100 Black
41 = PE100 Blue For water applications, GPS recommend to de-rate the pressure rating of large diameter mitred bends to 0.8 x the pipe rating from which it was made.
58 = PE80 Yellow
90 gas elbows have one less segment than shown.

Size (D) Z SDR11 SDR17/17.6 SDR21


(mm) (mm) Weight (kg) Weight (kg) Weight (kg)

90 617 2.4 1.6 -


110 643 3.9 2.7 -
125 663 5 4 -
160 708 9 6 5
180 734 12 8 7
225 793 20 14 11
250 825 26 17 14
280 864 32 22 17
315 907 42 29 23
355 962 56 38 30
400 1020 75 51 39
450 1585 153 103 81
500 1650 195 132 102
560 1729 255 170 131
630 1820 335 230 177
710 1929 450 305 259
800 2041 - 405 344
900 2171 - 568 462
1000 2301 - 731 595
1200 - - 1152 940

Blue pupped fittings may include black moulding component, pupped with blue pipe.

80
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 81

PUPPED FITTINGS
45 Mitred Elbow

SDR
Size SDR 11** Each Each Each Each Each Each SDR 21** Each Each
17/17.6**
(mm) Code 40 Black 41 Blue 58 Yellow 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue
Code
90 XX 242 313 78.40 78.40 82.20 XX 241 313 71.40 71.40 75.10 XX 247 313 - -
110 XX 242 314 106.10 106.10 111.40 XX 241 314 86.90 86.90 91.30 XX 247 314 - -
125 XX 242 315 117.50 117.50 123.30 XX 241 315 105.60 105.60 110.80 XX 247 315 - -
160 XX 242 317 199.30 199.30 209.20 XX 241 317 189.30 189.30 198.70 XX 247 317 166.60 166.60
180 XX 242 318 267.50 267.50 281.00 XX 241 318 253.60 253.60 266.40 XX 247 318 202.80 202.80
225 XX 242 320 345.10 345.10 362.40 XX 241 320 328.10 328.10 344.50 XX 247 320 272.20 272.20
250 XX 242 321 426.20 426.20 447.50 XX 241 321 404.10 404.10 424.30 XX 247 321 329.10 329.10
280 XX 242 322 646.30 646.30 678.40 XX 241 322 554.30 554.30 582.10 XX 247 322 465.70 465.70
L

315 XX 242 323 746.90 746.90 777.90 XX 241 323 727.60 727.60 764.00 XX 247 323 592.40 592.40
355 XX 242 324 1,226.30 1,226.30 1,287.30 XX 241 324 935.20 935.20 981.20 XX 247 324 752.30 752.30
400 XX 242 325 1,300.10 1,300.10 1,365.40 XX 241 325 1,136.40 1,136.40 1,193.10 XX 247 325 938.00 938.00
450 XX 242 326 1,455.20 1,455.20 1,528.00 XX 241 326 1,298.00 1,298.00 1,363.20 XX 247 326 1,142.20 1,019.00
Z 500 XX 242 327 1,617.90 1,617.90 1,698.10 XX 241 327 1,534.40 1,534.40 1,611.50 XX 247 327 1,268.00 1,268.00
R
560 XX 242 328 1,762.30 1,762.30 1,851.10 XX 241 328 1,671.40 1,671.40 1,754.80 XX 247 328 1,452.00 1,452.00
630 XX 242 329 2,040.50 2,040.50 2,142.20 XX 241 329 1,933.50 1,933.50 2,030.90 XX 247 329 1,722.00 1,722.00
710 XX 242 330 P.O.A. P.O.A. - XX 241 330 P.O.A. P.O.A. - XX 247 330 2,068.00 2,068.00
800 - - - - XX 241 332 3,280.30 P.O.A. - XX 247 332 P.O.A. P.O.A.
900 - - - - XX 241 333 P.O.A. P.O.A. - XX 247 333 P.O.A. P.O.A.
1000 - - - - XX 241 334 P.O.A. P.O.A. - XX 247 334 P.O.A. P.O.A.
1200 - - - - XX 241 335 P.O.A. P.O.A. - XX 247 335 P.O.A. P.O.A.

** Replace XX with material/ L = Available leg length, standard = 0.5m for 90mm to 400mm sizes, 1.0m for 450mm to 1200mm sizes. We can suppply longer legs for some
colour required:
butt-fusion machines or shorter (long spigot) for electrofusion. R = Radius of curvature = approx 1.5 x D (the pipe size)
40 = PE100 Black
41 = PE100 Blue For water applications, GPS recommend to de-rate the pressure rating of large diameter mitred bends to 0.8 x the pipe rating from which it was made.
58 = PE80 Yellow
.

Size (D) Z SDR11 SDR17/17.6 SDR21


(mm) (mm) Weight (kg) Weight (kg) Weight (kg)

90 538 2.3 1.6 -


110 546 3.5 2.4 -
125 553 5 3 -
160 568 8 6 5
180 576 10 7 6
225 595 17 12 9
250 606 20 14 12
280 618 25 17 15
315 632 33 22 19
355 650 42 29 25
400 669 55 37 33
450 1191 124 84 42
500 1211 156 106 89
560 1237 200 131 114
630 1266 260 175 147
710 1300 340 230 191
800 1296 - 300 249
900 1350 - 400 325
1000 1500 - 506 412
1200 - - 769 628

Note: Dimensions of pupped fittings should be used subject to a +/ 5mm tolerance due to the nature of the fabrication process.
Note: Additional bespoke large diameter fabricated fittings are available to order - please contact our Sales Office for further information.

81
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 82

PUPPED FITTINGS
2212 Mitred Elbow

SDR
Size SDR 11** Each Each Each Each Each Each SDR 21** Each Each
17/17.6**
(mm) Code 40 Black 41 Blue 58 Yellow 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue
Code
90 XX 317 313 56.30 56.30 59.10 XX 316 313 52.80 52.80 55.40 XX 246 313 - -
110 XX 317 314 78.40 78.40 82.30 XX 316 314 68.40 68.40 71.80 XX 246 314 - -
125 XX 317 315 86.20 86.20 90.50 XX 316 315 81.90 81.90 86.00 XX 246 315 - -
160 XX 317 317 175.90 175.90 184.60 XX 316 317 138.80 138.80 145.80 XX 246 317 115.90 115.90
180 XX 317 318 219.20 219.20 230.20 XX 316 318 207.80 207.80 218.20 XX 246 318 166.30 166.30
225 XX 317 320 329.50 329.50 346.00 XX 316 320 251.30 251.30 263.80 XX 246 320 204.20 204.20
250 XX 317 321 333.80 333.80 350.50 XX 316 321 314.50 314.50 330.30 XX 246 321 259.70 259.70
280 XX 317 322 453.30 453.30 476.00 XX 316 322 340.80 340.80 358.00 XX 246 322 277.50 277.50
L

315 XX 317 323 585.70 585.70 614.90 XX 316 323 554.30 554.30 582.00 XX 246 323 444.10 444.10
355 XX 317 324 819.70 819.70 861.40 XX 316 324 713.70 713.70 749.00 XX 246 324 578.90 578.90
400 XX 317 325 1,051.90 1,051.90 1,104.30 XX 316 325 914.90 914.90 960.90 XX 246 325 756.50 756.50
450 XX 317 326 1,244.50 1,244.50 1,307.60 XX 316 326 1,082.90 1,082.90 1,136.40 XX 246 326 952.90 952.90
Z R 500 XX 317 327 1,471.30 1,471.30 1,545.10 XX 316 327 1,279.80 1,279.80 1,344.00 XX 246 327 1,057.00 1,057.00
560 XX 317 328 1,602.90 1,602.90 1,683.20 XX 316 328 1,393.20 1,393.20 1,462.70 XX 246 328 1,175.00 1,175.00
630 XX 317 329 1,855.40 1,855.40 1,948.50 XX 316 329 1,613.60 1,613.60 1,693.90 XX 246 329 1,464.00 1,464.00
710 XX 317 330 P.O.A. P.O.A. - XX 316 330 P.O.A. P.O.A. - XX 246 330 1,904.00 1,904.00
800 - - - - XX 316 332 P.O.A. P.O.A. - XX 246 332 P.O.A. P.O.A.
900 - - - - XX 316 333 P.O.A. P.O.A. - XX 246 333 P.O.A. P.O.A.
1000 - - - - XX 316 334 P.O.A. P.O.A. - XX 246 334 P.O.A. P.O.A.
1200 - - - - XX 316 335 P.O.A. P.O.A. - XX 246 335 P.O.A. P.O.A.

** Replace XX with material/ L = Available leg length, standard = 0.5m for 90mm to 400mm sizes, 1.0m for 450mm to 1200mm sizes. We can suppply longer legs for some
colour required:
butt-fusion machines or shorter (long spigot) for electrofusion. R = Radius of curvature = approx 1.5 x D (the pipe size)
40 = PE100 Black
41 = PE100 Blue For water applications, GPS recommend to de-rate the pressure rating of large diameter mitred bends to 0.8 x the pipe rating from which it was made.
58 = PE80 Yellow

Size (D) Z SDR11 SDR17/17.6 SDR21


(mm) (mm) Weight (kg) Weight (kg) Weight (kg)

90 509 2.2 1.5 -


110 511 3.2 2.2 -
125 513 4.2 2.8 -
160 516 7 5 4
180 518 9 6 5
225 523 15 10 8
250 525 18 12 10
280 528 28 19 12
315 531 29 20 16
355 536 35 30 20
400 540 45 31 26
450 1045 110 75 62
500 1050 136 92 77
560 1055 172 113 97
630 1063 220 150 123
710 1068 285 190 157
800 1080 - 245 201
900 1090 - 316 257
1000 1099 - 393 320
1200 1199 - 576 470

Blue pupped fittings may include black moulding component, pupped with blue pipe.

82
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 83

PUPPED FITTINGS
1114 Mitred Elbow

SDR
Size SDR 11** Each Each Each Each Each Each SDR 21** Each Each
17/17.6**
(mm) Code 40 Black 41 Blue 58 Yellow 40 Black 41 Blue 58 Yellow Code 40 Black 41 Blue
Code
90 XX 298 313 56.30 56.30 59.10 XX 297 313 52.80 52.80 55.40 XX 245 313 - -
110 XX 298 314 78.40 78.40 82.30 XX 297 314 68.40 68.40 71.20 XX 245 314 - -
125 XX 298 315 86.20 86.20 90.50 XX 297 315 81.50 81.50 85.50 XX 245 315 - -
160 XX 298 317 175.90 175.90 184.60 XX 297 317 138.80 138.80 145.80 XX 245 317 115.90 115.90
180 XX 298 318 219.20 219.20 230.20 XX 297 318 207.40 207.40 217.80 XX 245 318 166.30 166.30
225 XX 298 320 329.50 329.50 346.00 XX 297 320 251.00 251.00 263.50 XX 245 320 204.20 204.20
250 XX 298 321 333.80 333.80 350.50 XX 297 321 314.30 314.30 330.00 XX 245 321 259.70 259.70
280 XX 298 322 453.30 453.30 476.00 XX 297 322 340.80 340.80 358.00 XX 245 322 277.50 277.50
L

315 XX 298 323 586.40 586.40 615.30 XX 297 323 554.30 554.30 582.10 XX 245 323 444.10 444.10
355 XX 298 324 819.70 819.70 861.40 XX 297 324 712.70 712.70 748.00 XX 245 324 652.70 379.90
400 XX 298 325 1,051.90 1,051.90 1,104.30 XX 297 325 914.90 914.90 960.90 XX 245 325 757.00 757.00
R 450 XX 298 326 1,244.50 1,244.50 1,307.60 XX 297 326 1,081.80 1,081.80 1,136.40 XX 245 326 952.00 958.00
Z 500 XX 298 327 1,471.30 1,471.30 1,545.10 XX 297 327 1,279.80 1,279.80 1,342.90 XX 245 327 1,057.00 1,057.00
560 XX 298 328 1,602.90 1,602.90 1,683.20 XX 297 328 1,393.20 1,393.20 1,462.70 XX 245 328 959.80 1,175.00
630 XX 298 329 1,855.40 1,855.40 1,948.50 XX 297 329 1,612.50 1,612.50 1,693.90 XX 245 329 1,464.00 1,464.00
710 XX 298 330 P.O.A. P.O.A. - XX 297 330 P.O.A. P.O.A. - XX 245 330 3,039.90 1,904.00
800 - - - - XX 297 332 P.O.A. P.O.A. - XX 245 332 P.O.A. P.O.A.
900 - - - - XX 297 333 P.O.A. P.O.A. - XX 245 333 4,881.40 P.O.A.
1000 - - - - XX 297 334 P.O.A. P.O.A. - XX 245 334 P.O.A. P.O.A.
1200 - - - - XX 297 335 P.O.A. P.O.A. - XX 245 335 P.O.A. P.O.A.

** Replace XX with material/ L = Available leg length, standard = 0.5m for 90mm to 400mm sizes, 1.0m for 450mm to 1200mm sizes. We can suppply longer legs for some
colour required:
butt-fusion machines or shorter (long spigot) for electrofusion. R = Radius of curvature = approx 1.5 x D (the pipe size)
40 = PE100 Black
41 = PE100 Blue For water applications, GPS recommend to de-rate the pressure rating of large diameter mitred bends to 0.8 x the pipe rating from which it was made.
58 = PE80 Yellow

Size (D) Z SDR11 SDR17/17.6 SDR21


(mm) (mm) Weight (kg) Weight (kg) Weight (kg)

90 505 2.1 1.5 -


110 506 3.2 2.2 -
125 506 4.1 2.8 -
160 508 7 5 4
180 509 9 6 5
225 511 14 10 8
250 512 17 12 10
280 514 21 15 12
315 516 21 15 16
355 518 34 29 20
400 520 44 30 25
450 1022 110 75 61
500 1025 133 90 75
560 1026 168 110 94
630 1031 215 145 120
710 1035 275 185 152
800 1039 - 235 194
900 1040 - 301 245
1000 1058 - 379 308
1200 1059 - 546 445

Note: Dimensions of pupped fittings should be used subject to a +/ 5mm tolerance due to the nature of the fabrication process.
Note: Additional bespoke large diameter fabricated fittings are available to order - please contact our Sales Office for further information.

83
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 84

ACCESSORIES
Blue Rilsan Backing Rings for Water for use with PE80 SDR17/11 & PE100 SDR17

Size 1
Blue Code Each
(mm)

50 x 40 PN10/16 53 475 310 13.85


63 x 50 PN10/16 53 475 311 20.00
C A P 75 x 65 PN10/16 53 475 312 24.00
90 x 80 PN10/16 53 475 313 27.10
110 x 100 PN10/16 53 475 314 30.90
125 x 100 PN10/16 53 475 315 29.10
D 160 x 150 PN10/16 53 475 317 44.10
180 x 150 PN10/16 53 475 318 44.10
200 x 200 PN16* 53 473 320 84.50
B 225 x 200 PN10* 53 475 320 86.50
225 x 200 PN16* 53 473 320 84.50
250 x 250 PN10 53 475 321 104.90
250 x 250 PN16 53 473 321 104.90
280 x 250 PN16 53 473 322 129.90
315 x 300 PN10 53 475 323 139.90
315 x 300 PN16 53 473 323 139.90

* 225 x 200 backing ring is also used on 200 x 200 PN16 flange.
** 6mm backing rings are rated at 12.5 bar.

Blue Rilsan coated backing rings are for use with the
following systems:
Black/Blue PE80 - MDPE SDR17 & SDR 11
Black/Blue PE100 (Excel) SDR17
Drilled to BS EN 1092-1:2007 Table 13

1
The first size refers to the outside diameter of the PE pipe and
the second to the nominal bore of the ductile iron pipe or fitting.

Size 1 A B C D PCD P No of Weight


(mm) (mm) (mm) (mm) (mm) (mm) Holes (kg)

50 x 40 PN10/16 150 6** 62 18 110 4 0.6


63 x 50 PN10/16 165 8 77 18 125 4 1.0
75 x 65 PN10/16 185 8 91 18 145 4 1.2
90 x 80 PN10/16 200 8 107 18 160 8 1.3
110 x 100 PN10/16 220 8 127 18 180 8 1.5
125 x 100 PN10/16 220 9 134 18 180 8 1.5
160 x 150 PN10/16 285 10 177 22 240 8 2.8
180 x 150 PN10/16 285 10 185 22 240 8 2.7
200 x 200 PN16* 340 10 237 22 295 12 4.0
225 x 200 PN10* 340 10 237 22 295 8 4.0
225 x 200 PN16* 340 10 237 22 295 12 3.4
250 x 250 PN10 395 15 287 22 350 12 6.8
250 x 250 PN16 405 15 294 26 355 12 7.0
280 x 250 PN16 405 20 294 26 355 12 12.0
315 x 300 PN10 445 20 329 22 400 12 12.0
315 x 300 PN16 460 20 338 26 410 12 12.0

84
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 85

ACCESSORIES
Black Rilsan Backing Rings for Water for use with PE100 SDR11

Size 1
Black Code Each
(mm)

63 x 50 PN10/16 58 475 311 26.00


75 x 65 PN10/16 58 475 312 26.65
C A P 90 x 80 PN10/16 58 475 313 27.55
110 x 100 PN10/16 58 475 314 33.20
125 x 100 PN10/16 58 475 315 33.20
160 x 150 PN10/16 58 475 317 73.30
D 180 x 150 PN10/16 58 475 318 73.30
225 x 200 PN16 58 473 320 124.40
250 x 250 PN16 58 473 321 187.00
B 280 x 250 PN16 58 473 322 203.40
315 x 300 PN16 58 473 323 234.50

Black Rilsan coated backing rings are for use with the following
systems: Blue PE100 (Excel) SDR11

Drilled to BS EN 1092-1:2007 Table 13


1
The first size refers to the outside diameter of the PE pipe and
the second to the nominal bore of the ductile iron pipe or fitting.

Size 1 A B C D PCD P No of Weight


(mm) (mm) (mm) (mm) (mm) (mm) Holes (kg)

63 x 50 PN10/16 165 12.5 77 18 125 4 1.5


75 x 65 PN10/16 185 12.5 91 18 145 4 1.9
90 x 80 PN10/16 200 15 107 18 160 8 2.4
110 x 100 PN10/16 220 15 127 18 180 8 2.7
125 x 100 PN10/16 220 15 134 18 180 8 2.6
160 x 150 PN10/16 285 20 177 22 240 8 5.7
180 x 150 PN10/16 285 20 185 22 240 8 5.3
225 x 200 PN16 340 20 237 22 295 12 6.6
250 x 250 PN16 405 25 287 26 355 12 11.3
280 x 250 PN16 405 25 294 26 355 12 11.0
315 x 300 PN16 460 25 338 26 410 12 14.7

85
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 86

ACCESSORIES
Galvanised Backing Rings for Water for use with PE80 SDR17/11 and PE100 SDR17 (Not PE100 SDR11)

Size 1
Black Code Each
(mm)

355 x 350 PN16 53 474 324 348.10


400 x 400 PN16 53 474 325 476.00
C A P 450 x 450 PN16 53 474 326 677.10
500 x 500 PN16 24 996 118 844.80
560 x 600 PN16 53 474 328 1,323.20
630 x 600 PN16 53 996 605 1,491.90
D 710 x 700 PN16 53 996 621 2,221.20

Galvanised Mild Steel backing rings are for use with the following
B systems: Black/Blue PE80 - MDPE SDR17, SDR 17.6 & SDR11 -
product no longer standard offer

Black/Blue PE100 (Excel) SDR17 & SDR17.6


Drilled to BS EN 1092-1:2007 Table 13
1
The first size refers to the outside diameter of the PE pipe and
the second to the nominal bore of the ductile iron pipe or fitting.

Size 1 A B C D PCD P No of Weight


(mm) (mm) (mm) (mm) (mm) (mm) Holes (kg)

355 x 350 PN16 520 20 376 26 470 16 14.6


400 x 400 PN16 580 25 430 30 525 16 21.1
450 x 450 PN16 640 25 465 30 585 20 27.0
500 x 500 PN16 715 30 533 33 650 20 38.0
560 x 600 PN16 840 42 618 36 770 20 77.1
630 x 600 PN16 840 44 645 36 770 20 71.5
710 x 700 PN16 910 50 740 36 840 24 76.9

86
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 87

ACCESSORIES
Galvanised Backing Rings for Gas for use with PE80 SDR17.6

Size 1
Yellow Code Each
(mm)

63 x 50 PN10/16 53 457 311 26.00


90 x 80 PN10/16 53 457 313 27.60
C A P 90 x 100 PN10/16 53 457 484 27.90
125 x 100 PN10/16 53 457 315 33.20
180 x 150 PN10/16 53 457 318 73.30
250 x 250 PN10 53 457 321 97.70
D 315 x 300 PN10 53 457 323 130.70
225 x 200 PN16 53 457 320 80.00
250 x 250 PN16 53 458 321 104.90
B 280 x 250 PN16 53 457 322 112.15
315 x 300 PN16 53 458 323 139.90
355 x 350 PN16 53 458 324 342.90
400 x 400 PN16 53 458 325 473.50
450 x 450 PN16 53 458 326 662.70
500 x 500 PN16 53 458 327 1,104.50

Galvanised Mild Steel backing rings are for use with the following
systems: Yellow PE80 MDPE SDR17.6
Drilled to BS EN 1092-1:2007 Table 13
1
The first size refers to the outside diameter of the PE pipe and
the second to the nominal bore of the ductile iron pipe or fitting.

Size 1 A B C D PCD P No of Weight


(mm) (mm) (mm) (mm) (mm) (mm) Holes (kg)

63 x 50 PN10/16 165 12 77 18 125 4 1.0


90 x 80 PN10/16 200 12 107 18 160 8 1.2
90 x 100 PN10/16 220 10 107 18 180 8 1.0
125 x 100 PN10/16 220 12 134 18 180 8 1.4
180 x 150 PN10/16 285 12 185 22 240 8 2.7
250 x 250 PN10 395 15 287 22 350 12 6.8
315 x 300 PN10 445 15 338 22 400 12 8.8
225 x 200 PN16 340 12 237 22 295 12 3.4
250 x 250 PN16 405 15 287 26 355 12 6.8
280 x 250 PN16 405 15 287 26 355 12 6.7
315 x 300 PN16 460 15 329 26 410 12 8.8
355 x 350 PN16 520 35 359 26 470 16 15.0
400 x 400 PN16 580 40 404 30 525 16 39.0
450 x 450 PN16 640 40 455 30 585 20 47.0
500 x 500 PN16 715 45 506 33 650 20 68.0

87
Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 88

ACCESSORIES
Gaskets

Size 1 EPDM for Nitrile for Per A B C Weight


(mm) Water Gas Metre (mm) (mm) (mm) (kg)

63 x 50 PN16 53 488 311 53 490 311 1.33 102 4 53 0.01


75 x 65 PN16 53 488 312 - 1.69 122 4 60 0.02
C A 90 x 80 PN16 53 488 313 53 490 313 1.80 138 4 75 0.03
110 x 100 PN16 53 488 314 - 2.17 158 4 98 0.04
125 x 100 PN16 53 488 315 53 490 315 2.52 158 4 104 0.05
160 x 150 PN16 53 488 317 - 5.29 212 4 160 0.07
180 x 150 PN16 53 488 318 53 490 318 5.64 212 4 160 0.08
200 x 200 PN16 53 488 319 - 7.69 268 4 205 0.12
B 225 x 200 PN16 53 488 320 - 8.40 268 4 205 0.17
250 x 250 PN16 53 488 321 53 490 321 11.65 320 4 206 0.19
315 x 300 PN16 53 488 323 53 490 323 13.80 370 4 275 0.21

EPDM for Water or Nitrile for Gas.


The first size refers to the outside diameter of the PE pipe and the second to the nominal bore of the ductile iron
pipe or fitting.

In some sizes, gaskets may be supplied as inside bolt circle rather than full faced.

Steel Reinforced Gaskets

Flange Size 1 SDR 13.6-26 SDR 11


Each Each
(mm) For water Water

250 x 200 PN16 53 592 319 P.O.A. 53 591 319 P.O.A.


250 x 250 PN16 53 592 321 P.O.A. 53 591 321 P.O.A.
C A 315 x 250 PN16 - - 53 591 321 P.O.A.
315 x 300 PN16 53 592 323 P.O.A. 53 591 323 P.O.A.
355 x 300 PN16 53 592 323 P.O.A. 53 591 323 P.O.A.
355 x 350 PN16 53 592 324 P.O.A. 53 591 324 P.O.A.
400 x 350 PN16 53 592 324 P.O.A. 53 591 324 P.O.A.
400 x 400 PN16 53 592 325 P.O.A. 53 591 325 P.O.A.
EPDM for Water.
B 450 x 400 PN16 53 592 325 P.O.A. 53 591 325 P.O.A.
For more critical applications at 450 x 450 PN16 - - 53 591 326 P.O.A.
above 10 bar, GPS recommends the 500 x 450 PN16 - - 53 591 326 P.O.A.
use of steel reinforced gaskets
500 x 500 PN16 53 592 327 P.O.A. 53 591 327 P.O.A.
The first size refers to the outside 560 x 500 PN16 53 592 327 P.O.A. 53 591 327 P.O.A.
diameter of the PE pipe and the 560 x 600 PN16 53 592 328 P.O.A. 53 591 328 P.O.A.
second to the nominal bore of the
630 x 600 PN16 - - 53 591 328 P.O.A.
ductile iron pipe or fitting.
710 x 700 PN16 53 592 330 P.O.A. 53 591 330 P.O.A.
800 x 800 PN16 - - 53 591 332 P.O.A.
900 x 900 PN16 - - 53 591 333 P.O.A.
1000 x 1000 PN16 - - 53 591 334 P.O.A.
1200 x 1200 PN16 - - 53 591 335 P.O.A..

Suitable for SDR13.6-26 (Flat Gaskets) Suitable for SDRs up to 11 (Profiled Gaskets)
Size 1 A B C A B C
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
DN200 PN16 273 6 220 273 6 220
DN250 PN16 329 6 273 329 6 273
DN300 PN16 384 6 324 384 6 324
DN350 PN16 445 7 368 445 7 368
DN400 PN16 497 7 420 497 7 420
DN450 PN16 - - - 557 7 470
DN500 PN16 618 7 520 618 7 520
DN600 PN16 735 7 620 735 7 620
DN700 PN16 - - - 805 8 720
DN800 PN16 - - - 910 8 820
DN900 PN16 - - - 1010 8 920
DN1000 PN16 - - - 1125 8 1020
DN1200 PN16 - - - 1342 8 1220

SDR 17.6 is available in Yellow only.

88
Tel: +44 (0)1480 52121 Fax: +44 (0)1480 458829 Technical Support: +44 (0)1480 442620
DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 89

TERMS & CONDITIONS OF SALE


GPS
PE PIPE SYSTEMS

1. DEFINITIONS: 9. SHORTAGES AND DEFECTS APPARENT ON DELIVERY:


"Seller" shall mean Glynwed Pipe Systems Limited, Registered in England under number a) It shall be the responsibility of the Buyer to inspect or arrange for an inspection of the
1698059. "Buyer" shall mean any company, organisation or individual to whom a quotation goods on delivery whether the goods are delivered to the Buyer's premises or to the
is offered, or whose order is accepted by the Seller. premises of the Buyer's customer or to a works site. If no such inspection is made the
Buyer shall be deemed to have accepted the goods.
2. CONDITIONS: b) The Buyer shall have no claim for shortages or defects apparent on inspection unless:
All offers, quotations, estimates, acceptances and contracts are subject to these Conditions of i) a written complaint is made to the Seller within three days of receipt of the goods
Business and any terms or conditions which any other person shall seek to impose or make specifying the shortage or defect; and
part of any contract shall, so far as is inconsistent with these Conditions of Business, not ii) the Seller is within seven days of receipt of the complaint given an opportunity to
apply unless expressly agreed by the Seller in writing. The headings in these conditions are inspect the goods and investigate the complaint before any use is made of the goods.
for convenience only and shall not affect their interpretation. c) If a complaint is not made to the Seller as herein provided then in respect of such
shortages or defects the goods shall be deemed to be in all respects in accordance with
3. QUOTATIONS AND PRICE VARIATION: the contract and the Buyer shall be bound to pay for the same accordingly.
a) Any quotation given by the Seller is an invitation to the Buyer to make an offer only and
no order of the Buyer placed with the Seller in pursuance of a quotation or otherwise shall 10. CLAIMS FOR DEFECTS NOT APPARENT ON INSPECTION:
be binding on the Seller unless and until it is accepted in writing by the Seller. a) The Buyer shall have no claim for defects not apparent on inspection unless the Seller is
b) Unless stated otherwise, all quotations and published price lists are ex works, exclusive of notified of defective workmanship or materials within twelve months from delivery of the
VAT and shall remain valid for 30 days or such a period as may be quoted but goods. Provided that the goods have been installed and applied in accordance with any
nevertheless the Seller may amend or withdraw any quotation by written or oral notice. relevant recommendations made by the Seller, the Seller will at its option replace the
Quotations may be varied if the Buyer makes variations in his specifications. goods or refund the net invoiced price in respect of the goods which have been shown to
be defective. If the Seller does so supply substitute goods the Buyer shall be bound to
4. STATEMENTS OR REPRESENTATIONS TO THE BUYER: accept such substituted goods in full satisfaction of the obligations of the Seller under the
If any statement or representation has been made to the Buyer upon which the Buyer relies contract.
other than in the documents enclosed with the Seller's quotation, the Buyer must set out that b) The Buyer shall in any event have no claim or set-off in respect of defects unless a written
statement or representation in a document to be attached to or endorsed on the order in complaint is sent to the Seller as soon as the defect is noticed and no use is made of the
which case the Seller may submit a new quotation. goods thereafter or alteration made thereto by the Buyer before the Seller is given an
opportunity to inspect the goods.
5. DELIVERY - TIME: c) The Buyer is responsible for ensuring that the goods are fit for any particular purpose, and
a) Any period for delivery given at any time and in any manner by the Seller is an estimate no warranty or condition of fitness for any particular purpose is to be implied into the
only and is not binding on the Seller. Delivery periods are normally calculated from the contract.
later of:
i) acceptance of order; or 11. LIABILITY:
ii) where applicable, the receipt by the Seller of a detailed specification or drawings. Save as stated in Conditions 9 and 10 (and save in respect of death or personal injury
b) Time shall not be deemed to be of the essence of the contract. Failure by the Seller to resulting from the negligence of the Seller its servants or agents) the Seller shall not be liable
meet any quoted delivery period for any part or the whole of the order shall not entitle the for any claim or claims for direct or indirect consequential or incidental injury loss or damage
Buyer to rescind the contract or to claim damages of any nature. made by the Buyer against the Seller whether in contract or in tort (including negligence on
c) The Seller will endeavour to comply with reasonable requests by the Buyer for the part of the Seller its servants or agents) arising out of or in connection with any defect in
postponement of delivery but shall be under no obligation to do so. Where delivery is the goods or their fitness or otherwise for any particular purpose or any act omission neglect
postponed otherwise than due to default by the Seller the Buyer shall pay all costs and or default of the Seller its servants or agents in the performance of the contract.
expenses including a reasonable charge for storage and transportation occasioned thereby
and an extra charge for split delivery if applicable. 12. FORCE MAJEURE:
d) The Buyer will receive delivery of any consignment between the hours of 8.0am and Notwithstanding anything herein contained neither the Buyer nor the Seller is to be held
4.0pm Monday to Friday inclusive, unless otherwise agreed in writing. Cost incurred by liable for any delay or failure to carry out the contract due wholly or in part to an act of God
the Seller arising from the Buyer's refusal to accept consignments within the agreed hours action by any Government whether British or foreign civil war strikes and/or lockouts
shall be borne by the Buyer. wheresoever occurring fire trade disputes floods or unfavourable weather or any material
becoming unavailable or irreplaceable (whether at all or at commercially acceptable prices) or
6. DELIVERY AND RISK: any other circumstances beyond the control of the Seller.
a) Except where stated to the contrary in the contract, delivery shall be made as follows:
i) where the Buyer provides the transport, delivery shall be made ex the Seller's works; 13. SUB-CONTRACTING:
ii) where the Seller provides the transport, delivery shall be made to the premises of the The Seller reserves the right to sub-contract the fulfilment of any order or any part thereof.
Buyer, or the premises of the Buyer's customer or works site if the Buyer has requested
delivery to be so made but where the Buyer has made such a request the Seller will 14. INSOLVENCY AND BREACH OF CONTRACT:
make a first delivery to the Buyer's customer or works site as so much of the goods as In the event that:
is available for that delivery but subsequent deliveries will be made to the premises of a) the Buyer commits any breach of the contract and fails to remedy such breach (if capable
the Buyer. of remedy) within a period of thirty days from receipt of a notice in writing from the Seller
b) The Seller may at its discretion make partial delivery of orders and invoice the same. requesting such remedy; or
c) Risk in the goods shall pass on delivery. b) any distress or execution is levied upon any of the goods or property of the Buyer; or
d) Where goods are sent FOB the Seller's responsibility shall cease when the goods are c) the Buyer offers to make any arrangements with or for the benefit of its creditors or (if an
placed on board ship or aircraft without the need for the Seller to give notice to the Buyer individual) becomes subject to a petition for a bankruptcy order or (being a limited
and the provisions of Section 32(3) of the Sale of Goods Act 1979 shall not apply. company) has a receiver appointed of the whole or any part of its undertaking property or
assets; or
7. OWNERSHIP OF GOODS: d) an order is made or a resolution is passed or analogous proceedings are taken for the
a) The goods shall remain the sole and absolute property of the Seller as legal and equitable winding up of the Buyer (save for the purpose of reconstruction or amalgamation with
owner until such time as the Buyer shall have paid to the Seller the contract price together insolvency and previously approved in writing by the Seller) the Seller shall thereupon be
with the full price of any other goods the subject of any contract between the Seller and entitled without prejudice to its other rights hereunder forthwith to suspend all further
the Buyer. deliveries until the default has been made good or to determine the contract and any
b) The Buyer acknowledges that until such time as the property in the goods passes to the unfulfilled part thereof or at the Seller's option to make partial deliveries. Notwithstanding
Buyer he is in possession of the goods as a bailee and fiduciary agent for the Seller and any such termination the Buyer shall pay to the Seller at the contract rate for all the
the Purchaser shall store the goods in such a manner that they are clearly identifiable as goods delivered up to and including the date of termination.
the property of the Seller.
c) Until payment due under all contracts between the Buyer and the Seller had been made in 15. INDUSTRIAL PROPERTY RIGHTS:
full, in the event of sale of the goods by the Buyer: If goods supplied by the Seller to the Buyer's design or specifications infringe or are alleged to
i) the Seller shall be entitled to trace all proceeds of sale received by the Buyer through infringe any patent or registered design right or copyright the Buyer will indemnify the Seller
any bank or other account maintained by the Buyer; and against all damages, costs and expenses incurred by the Seller as a result of the infringement
ii) the Buyer shall if requested by the Seller in writing to so assign its rights to recover the or allegation. The Buyer will give the Seller all possible help in meeting any infringement
selling price of the goods from the third parties concerned. Such monies to be held claim brought against the Seller.
separately by the Buyer as agent on behalf of the Seller.
d) The Seller may for the purpose of recovery of its goods enter upon any premises where 16. BUYER'S ERROR IN ORDERING:
they are stored or where they are reasonably thought to be stored and may repossess the In the event the Buyer orders incorrectly the Seller will be under no obligation to the Buyer to
same. rectify or assist in rectifying the error.

8. TERMS OF PAYMENT: 17. LAW AND JURISDICTION:


In the event of default in payment according to the agreed payment terms between the Seller The contract shall be subject in all respects to English Law and to the jurisdiction of the
and the Buyer ie: by the end of the month following the month of despatch of the goods English Courts.
the Seller shall be entitled without prejudice to any other right or remedy to suspend all
further deliveries and to charge interest on any amount outstanding at the rate of 2% per
month until payment in full is made (a part of a month being treated as a full month for the
purpose of calculating interest).

Website: www.gpsuk.com Email: enquiries@gpsuk.com DP001/2 May 2011


DP001/2-5 2011.qxd:new A4 price prod (Q4) 18/04/2011 19:08 Page 90

GPS PE Pipe Systems reserve the right to modify products without prior notice, as part of its programme of continuous improvement. The content of this publication is for
general information only and it remains the users responsibility to determine the suitability of any product contained therein for the intended application. Whilst every effort is
taken to ensure the accuracy of the information contained within the brochure, the details are offered in good faith and GPS PE Pipe Systems accepts no liability for matters
arising as a result of errors and/or omissions. The product range displayed in this catalogue does not automatically indicate stock availability.
Please contact our Sales Office for specific details.
A PDF version of this brochure is available from our website at www.gpsuk.com. Reproduction of this publication, or any part, is not permitted without the written consent of
GPS PE Pipe Systems. Please contact our Marketing Communications Department via enquiries@gpsuk.com or Tel:+44 (0)1480 442623 for further information.
GPS PE Pipe Systems is a trading name of Glynwed Pipe Systems Ltd. Company Number 1698059.

GPS
St Peters Road, Huntingdon, PE29 7DA Distributor
Tel: +44 (0)1480 52121
Fax: +44 (0)1480 458829
Web: www.gpsuk.com

PE PIPE SYSTEMS
Email: enquiries@gpsuk.com
Twitter: GPS_PE_Pipes

DP001/2 May 2011

You might also like