You are on page 1of 1

TWI S.E.

Asia
NDT TRAINING
Marking Scheme

Magnetic Particle Testing

Students results are compared with the marking master:


100 % Full marks

Mark will be deducted by the followings:

Attributes Particulars Marks Deducted Remarks


Defect detection Misses a MAJOR defect 30
(deliberately intended defects)
Misses a Minor defect 5
(small inclusions, gas pores)
Reporting 20
NON_EXISTENT defect
Positioning Distance taken from 5 for each defect
wrong datum
Distance from Datum 4 for every 5 mm
error
Defect on Wrong side of 5
weld/component
Length Longitudinal or 2 for every 5 mm
transverse error
Area of group defect No length of area 4
No width of area 2
Diameter of Not recorded 2
volumetric defect
Defect Type Wrong type 5
Similar type of defect 2
reported

Standard of reporting Poor Presentation/ no


neatness 5
No dimensions of 5
plate/pipe/component
reported
Wrong /no mention of 5
Information of
equipment, settings,
consumables
*This is a guideline only, marks may also be deducted subject to opinion of the marker.

You might also like