You are on page 1of 1

C A B L E A S S E M B L Y I N S T R U C T I O N

Controller Model: Mitsubishi FX0, FX0N, FX0S, FX2N, FX1S, FX1N,


and FX2NC
Maple OIT Model: Silver Series
Communication Type: RS-422/ RS485 with Mini DIN 8 Pin Connector at PLC

Use the wiring diagram and illustration to assemble a communication cable for use with a
Mitsubishi FX0, FX0N, FX0S, FX2N, FX1S, FX1N or FX2NC PLC.

18 AWG Green wire


4-40 x 1/2 Retainer
To Chassis Ground
Screw, 2 places
DE9S Connector Mini-DIN 8-Pin
& DE9 Backshell Connector
A

3 Pair Twisted A
24 AWG Shielded cable
OIT END PLC END
NOTES:
1 Twist together 18 AWG green wire and shield wire. Solder
wires and insulate with heatshrink to avoid shorting.
2 Connect shield wire to metal housing of the mini-DIN 8-pin connector.

1
Green
To Chassis Ground
Shield
OIT 2 Mini PLC 1 2
9S DIN8
RXD- 1 4 TXD- 3 4 5
8
RXD+ 2 7 TXD+ 6 7
Return 5 3 Signal Ground
Pin Configuration
TXD- 3 1 RXD- Mini-DIN8
TXD+ 4 2 RXD+ View A-A
(Solder Side)
PLC[RS485]

1023-0024, Rev 03

You might also like