You are on page 1of 5

THE ART OF CONNECTING-VAKKO Scarf

VI
Long scarf, a long thin rectangular folding to form two times. After
folding in the heart most. Scull placed. Open ends from the back of
the neck coil is passed from inside and the front end of the story is
released to.

V
Square scarves, in the form of mutual folding envelopes from both
ends. Facing a second storey within the folding is done. Two nodes
are placed on top of neck scarves and are discarded. One of the
front end and the other backwards to hang.
III
Long scarves, long thin rectangular folding to form three. Put an
end to the ring neck scarf is passed. After the ring to the other end
pleat is reviewed. Is the middle part and the shape is given Pliseli
bows.

I
Square scarf, triangle-shaped folding. Scarves, way up, folding the
edges are placed under the neck. Folding the two ends of the edge,
on the back of the neck combined node is discarded.
II
Square scarf, triangle-shaped folding. Scarf, folding up the edges are
placed back in the future format. Over the front shoulder toward the two
ends dangle from the first, in the middle of the ring is passed to the scarf.
Then the other end, again in the middle, will be the first to cross the ring
is passed.

VII
Square scarf, triangle-shaped folding. Scarves, kadana way back to
the edge of the future will be placed yukan. Forward over the
shoulders droop in one of the two ends of the ring is passed to the
scarf. Other end through the rings in this section pleat is made and
placed in the neck.
VIII
Square scarf, triangle-shaped folding. Scarves, way up, folding the
edges are placed under the neck. Kadana two ends of the side of the
neck behind the combined node is discarded. Front-end part of the
triangle in the middle of the ring, such as by subtracting from the
scarf is passed. Scarf neck wrap is pulled until the end.

IX
Long scarves, elongated to form a rectangle are doubled. Put an
end to the ring neck scarf is passed. After the ring to the other end
pleat is reviewed. Opens and the waves create Pleat on the side of
the shoulder is taken.
X
Long scarves, elongated to form a rectangle are doubled. Neck
nodes can be placed is discarded. Above the tip, the node is brought
forward from the back of the coil and placed.

XI
Square scarves, in the form of mutual folding envelopes from both
ends. Facing a second storey within the folding is done. Medium
facing a blank node will be dropped. Compressed facing node under
jaw, neck scarf is placed. From the back of the neck end of the front
coil is passed through the node, the second edge node from the other
side of the coil is passed through. Bow shape is given.

You might also like