Professional Documents
Culture Documents
What more do you need? • Designed to provide optimum adhesion for top coats
The combination of economics and
environmental responsibility makes
Intergard 475HS the ideal product
for use in fabrication shops
Test data
Hardness ASTM D3363 - "Film hardness by Pencil Test" 1 x 8 mils (200 μm) DFT applied directly Classification 4H
to Sa2.5 (SSPC-SP6) blasted steel
Impact ASTM D2794 - "Resistance to the Effects 1 x 8 mils (200 μm) DFTapplied directly Direct Impact Resistance - 3.2 Joules
of Rapid Deformation (Impact)" to Sa2.5 (SSPC-SP6) blasted steel
Adhesion ISO 4624 1 x 8 mils (200 μm) DFT applied directly over epoxy primer Not less than 1740 psi (12 MPa)
Salt spray ISO 7253 1 x 8 mils (200 μm) DFT applied over zinc rich epoxy primer No film defects and no rust creep
at the scribe after 4000 hours
The above performance data has been compiled based on present experience of in-service product performance and upon performance data obtained under laboratory test conditions.
Actual performance of the product will depend upon the conditions in which the product is used.
www.international-pc.com
pcmarketing.americas@akzonobel.com
G2_475HS_US
All trademarks mentioned in this publication are owned by the AkzoNobel group of companies. © Akzo Nobel 2014.
AkzoNobel has used its best endeavors to ensure that the information contained in this publication is correct at the time of printing.
09/14