You are on page 1of 1

Only models of calculators approved by NCEES are permitted in the exam room.

No other
models of calculators are permitted in the exam room. The following are the only calculators that
will be permitted in the exam room for the 2010 exam administrations

Casio: All fx-115 models. Any Casio calculator must contain


fx-115 in its model name.

Hewlett-Packard: The HP33s and HP 35s models, but no others

Texas Instruments: All TI-30X and TI-36X models. Any Texas


Instruments calculator must contain either TI-30X or
TI-36X in its model name.
Get a solar model.

Contact your licensing board regarding specific limitations or requirements:


http://www.ncees.org/licensure/licensing_boards/

General Subject Areas suggested references:

Cameron Hydraulic Data published by Flowserve ($39)


http://www.flowserve.com/eim/v/index.jsp?
vgnextoid=3378dc74f59aa010VgnVCM1000004f181eacRCRD&vgnextfmt=default

Design of Weldements by Blodgett ($15)(or design of Welded Structures by Blodgett($24))


https://ssl.lincolnelectric.com/foundation/item.asp?prodnum=DW&PID=16

Fundamentals of Engineering or Mechanical Engineers Reference by Lindenberg


Or
Mark’s Handbook for Mechanical Engineers ($150)

NCEES Reference Manual ($15 or Free Download at ncees.org)

Roark’s Handbook for Stress and Strain (if you can borrow a copy)

Your college Statics, Dynamic, Strengths, Fluids and Thermo texts.

Naval Arch references:

Applied Naval Architecture by Zubaly


Introduction to Naval Architecture by Gilmer

You might also like