Professional Documents
Culture Documents
For Use in High Speed Ball & Roller Bearing Applications NLGI 2
Cat Extreme Application Grease 2 Cat Extreme Application Grease - Arctic Cat Utility Grease
NLGI 2 NLGI 0.5 NLGI 2
(-15 to 140ºC / +5 to 284ºF) (-50º to 130ºC / -58º to 266ºF) (-20 to 140ºC / -4 to 284ºF)
With 5% Moly With 5% Moly Without Moly
Working High Load & Med Load & Low Load & Low Load &
High Temp Low Temp
Environment High Speed Med Speed Low Speed High Speed
Typical Properties
Recommended Use
NLGI 2
Cat Ball Bearing Grease can be used for
Color Blue high-speed ball-, needle- and sealed-
Operating Temperature Range, °C -20 to +160 bearing applications such as:
Operating Temperature Range, °F -4 to +320 • electric motors • fan drives
• starters • alternators
Base Oil Type Mineral • generators
cSt @ 40°C 115 It can also be used in automotive and
Thickener Type Polyurea industrial applications, especially
where equipment is operated
ASTM D2265 Dropping point, °C 264 intermittently in severe conditions.
ASTM D217 Penetration, worked 60, mm/10 262
Health and Safety
ASTM D2266 4 Ball Wear, scar diameter, mm 0.49
For information on proper use for health,
ASTM D1743 Rust prevention Pass
safety and environment, please refer to
ASTM D4048 Copper corrosion 1A the Material Safety Data Sheet (MSDS).
The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Read and understand the MSDS before
Specifications are subject to change without notice.
using this product. Always observe good
hygiene measures. For a copy of the
MSDS, contact us or visit the web at
www.catmsds.com.
PEHJ0405
www.cat.com