Ventilation and Control Triple Overtemperature Protection
• natural convection • in case of overtemperature due to failure, the heating is switched off at approx. 10 °C above • continuous adjustment of pre-heated fresh air the set temperature (fixed value) admixture • independently working, digitally adjustable • vent connection with restrictor flap electronic overtemperature controller TWW • fuzzy-supported PID microprocessor protection class 3.1 controller with integrated autodiagnostic • resolution of display and setting accuracy: 0,5 system with fault indication °C below 99,9 °C, 1 °C above 100 °C • solid state switching unit • mechanical temperature limiter TB protection • 2 Pt100 sensors Class A in 4-wire-circuit, class 1 switching the heating off at approx. 10 mutually monitoring and taking over the °C above max. oven temperature performance at the same temperature value • digital 7-day-programme-timer with real time Textured Stainless Steel Casing clock, precise minute setting, for one set value or ramp operation in combination with: • w x h x d: 630 x 600 x 400 mm • fully insulated stainless steel door with double • integrated digital timer for tempering profile locking and 4-point adjustment with max. 4 segments, each segment adjustable from 1 min to 999 hours: • rear zinc-plated steel DELAYED ON HEATING UP Interior - Heating Concept HOLD or HOLD set-temperature-dependent with guaranteed holding time • w x h x d: 480 x 320 x 250 mm, 39 l COOLING DOWN • easy-to-clean interior, made of stainless steel, • "Loop" function to repeat profile 1-99 times or reinforced by deep drawn ribbing with endless integrated and protected large-area heating on four sides • digital display (LED) of all set parameters, such as temperature, weekdays, time, • 1 perforated stainless steel shelf, non-tipping programme status and set-up values • resolution of display for set value 0,5 °C; for Temperature Range actual value 0,1 °C below 99,9 °C, 0,5 °C • from +30 °C (however, at least 5 °C above above 100 °C ambient) up to +250 °C • long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 Voltage / Power Rating kB • 230 V (+/- 10%), 50/60 Hz • serial interface RS 232 including MEMMERT Software „Celsius 2007" for programming and • ca. 1.200 W (during heating) documentation • adaption of effective heating power • incl. works calibration certificate for +160 °C depending on the set temperature Packing Data • net weight approx. 32 kg Accessories • gross weight carton approx. 40 kg • Temperature range +300 °C for A0 • gross weight wooden case approx. 47 kg universal ovens (not available for • dimensions approx.: ovens with glass door) carton w x h x d: 75 x 70 x 54 cm • Perforated stainless steel shelf, non- E0(x) wooden case w x h x d: 79 x 69 x 51 cm tipping • the appliances must be transported upright • IQ check list with works test data for Q1 oven as support for validation by Customs Tariff Number customer • 8419 3990 • OQ check list including one free- Q2 selectable temperature distribution Country of Origin survey to DIN 12880 for 9 measuring points with works test data for oven • Federal Republic of Germany as support for validation by customer