You are on page 1of 3

PEDAL DRIVE FORKLIFT

A REPORT SUBMITTED IN PARTIAL FULFILLMENT OF THE

REQUIREMENTS FOR THE DEGREE OF

BACHELOR OF TECHNOLOGY
In
Mechanical Engineering

By

NAME REGD NO

RAJESH KUMAR GIRI 1401216072


RAJESH NAYAK 1401216073
RONAK CHOUDHURY 1401216074
SAMIR RANJAN DHAL 1401216075
SATYA NARAYAN SAHU 1401216076
Of
8th Semester

Under the Supervision of

Prof. U.C.Palta Singh


Mech. Engg. Dept.

Department of Mechanical Engineering


Padmanava College of Engineering
Rourkela – 769002 (India)
March, 2018
PADMANAVA COLLEGE OF ENGINEERING, ROURKELA

CERTIFICATE

This is to certify that the work in this report entitled,” Pedal Drive Forklift” submitted by

Rajesh Kumar Giri (1401216072), Rajesh Nayak (1401216073), Ronak Choudhury

(1401216074), Samir Ranjan Dhal (1401216075), Satya Narayan Sahu (1401216076) was

carried out under my supervision in partial fulfillment for requirement of the award of degree of

Bachelor of Technology during session 2017-2018 in the Department of Mechanical

Engineering, Padmanava College of Engineering, Rourkela.

To the best of my knowledge, the matter embodied in this report has not been submitted to

any other university/ institute for the award of any degree or diploma.

Prof. U.C.Paltasingh Prof. S.Mohanty

Co-ordinator / Supervisor HOD


ACKNOWLEDGEMENT

I/We express my/our sincere gratitude and indebtedness to the project guide

Prof.U.C.Paltasingh (Co-ordinator/Supervisor), Mechanical Engineering Department for

his initiative in the field of research and his valuable guidance , encouragement and moral

support for the successful completion of this work. His sincere sympathies and kind attitude

always encouraged me/us to carry out the present work firmly.

My/Our special thanks to Prof. S. Mohanty, HOD Mechanical Engineering

Department for providing all kind of necessary facilities in the department to carry out the

Project work.

Rajesh Kumar Giri

Rajesh Nayak

Ronak Choudhury

Samir Ranjan Dhal

Satya Narayan Sahu

You might also like