Professional Documents
Culture Documents
3. Dr.M.KARTHIKEYAN (Member)
4. Dr.A.S.RAMKUMAR (Member)
The Comments given by the Indian and Foreign examiners have been reviewed by the
Doctoral Committee and ascertained that the corrections were carried out by the scholar.
*Title of the thesis / Title of the thesis modified as per the suggestion of Indian / Foreign
examiners.“INVESTIGATIONS ON THE DETERMINATION OF FATIGUE CURVE PARAMETERS
USING MATHEMATICAL FUNCTIONS.”
The Doctoral Committee further recommends a panel of experts for constituting oral
examination board.
Member Member
(Signature with Name with date) (Signature with Name and date)
Forwarded
Member Member
(Signature with Name with date) (Signature with Name and date)
Supervisor Joint Supervisor
(Signature with Name, date and seal) (Signature with Name, date and seal)
(if applicable)
Name :Dr.M.DURAISELVAM
Designation : Associate Professor & Head
Department : Production Engineering, National Institute of Technology,
Tiruchirappalli .
13.S. Rajesh, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam, “Statistical Analysis of
Dry Sliding Wear of Graphite Reinforced Aluminium MMCs”, Procedia Materials Science ,
2014,pp 1110-1120.
16.M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, Harshad Natu,
V.Muthupandi, K.Sivaprasad, K.R. Rajith, “Tribological studies on laser surface melted Hastelloy
C-276”, Surface Engineering 2013.2013, pp 314-322.
17.M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, Harshad Natu,
“Improvement of wear resistance of Hastelloy C-276 through laser surface melting”, Materials
and Design , 2013 ,pp 546-551.
20.Rajesh Siriyala, Gopala Krishna Alluru, Rama Murthy Raju Penmetsa, Muthukannan
Duraiselvam, “Application of grey-taguchi method for optimization of dry sliding wear
properties of aluminum MMCs”, Frontiers in Mechanical Engineering , 2012, pp 279-287.
Name :Dr.V.SELLADURAI
Designation : Professor & Principal
Department : Mechanical Engineering, Coimbatore Institute of Technology. Coimbatore
11. S Vairam, V Selladurai ,”Parallel Machine Shop Scheduling Using Memetic algorithm”,
Applied Mechanics and Materials 573, 2014,pp 362-367.
12. P Manimaran, V Selladurai, “Efficient heuristics for cost optimisation in multi stage supply
chain network with a fixed transportation charge”, International Journal of Services and
Operations Management , 2014, pp115-124.
13. S Vairam, V Selladurai, “Permutation genetic algorithm based encoding method for parallel
machine scheduling and balancing”, Applied Mechanics & Materials, 2014, pp125-132.
17. P Manimaran, V Selladurai, “Glowworm swarm optimisation algorithm for nonlinear fixed
charge transportation problem in a single stage supply chain network”, International Journal of
Logistics Economics and Globalisation , 2014, pp 42-55.
18. P Manimaran, V Selladurai , “Particle swarm optimisation for multi stage supply chain
network associated with fixed charges”, International Journal of Operational Research , 2014,
pp 100-122.
19 P Manimaran, V Selladurai,”Cat swarm optimization for single stage supply chain distribution
system with fixed charges”. ICTACT Journal on Soft Computing, 2014,pp 88-95.
22. K Sivasami, V Selladurai, SR Devadasan, K Rajan, “Reduction of NOx and Smoke Emission
with the effect of Biodiesel-Water Emulsion Mixture Fuel in a Diesel Engine “,International
Journal of Engineering and Technology ,2013,pp 242-249.
24. S Sundararaj, V Selladurai, “Flow and Mixing Pattern of Transverse Turbulent Jet in Venturi-
Jet Mixer”, Arabian Journal for Science & Engineering , 2013, pp 45-52.
25. P Ilamathi, V Selladurai, K Balamurugan, “A novel approach for modelling of NOx emission
reduction in a tangentially fired coal boiler”, International Journal of Oil, Gas and Coal
Technology, 2013, pp 449-461.
26. G Kannan, DV Selladurai, S Karthi ,”Swaging process for productivity improvement in the
manufacture of spindles”, NISCAIR-CSIR, India2013.
31. S Sundararaj, V Selladurai, ”The effects of arbitrary injection angle and flow conditions on
venturi-jet mixer”, Thermal Science , 2012 ,pp207-221.
9.C.Sabarinathan, Md. Naushad Ali and S.Muthu, “Wear and Friction Behavior of Epoxy /
MWCNTs Nanocomposites Under Dry Sliding Conditions” Current Nanoscience, 2013, 9,
pp.766-772.
15.C.Sabarinathan, S.Muthu and Md. Naushad Ali, “Experimental Study On Tensite Behavior Of
Multi Wall Carbon Nanotube Reinforced Epoxy Composites” Journal of Applied Sciences
Research, 8(7): 3253-3259, 2012.
17.K.Srinivasan, S.Muthu, C.Sugumaran, R.Sathyavanan and R.Satish Kumar " Bench Marking
study of Maintenance Performance Monitoring Practices in SMEs” European Journal of
Scientific Research Vol.79, No.3, 2012, pp.437 -448.