You are on page 1of 8

RH120E

Hydraulic Mining Excavator

RH120E HYDRAULIC MINING EXCAVATOR


6,450 mm 6,390 mm
(21 ft 2 in) (23 ft 0 in)

6,310 mm 5,300 mm
(20 ft 8 in) (17 ft 5 in)

7,600 mm
(24 ft 11 in)
6,500 mm
(21 ft 4 in)
4,950 mm
(16 ft 3 in)

2,150 mm 1,940 mm
(7 ft 1 in) (6 ft 4 in)
880 mm
(2 ft 11 in)

6,000 mm 1,000 mm
(19 ft 8 in) (3 ft 3 in)

7,640 mm 5,800 mm
(25 ft 1 in) (19 ft 0 in)

General Data: Features


Operating Weight • TriPower shovel attachment

Face Shovel 287 t 316 sht • Independent oil cooling system

Backhoe 290 t 319 sht • Spacious walk-through machine house

Engine Output SAE J 1995 • 5-circuit hydraulic system

Caterpillar® C27 1,140 kW 1,530 HP • New on-board electronics system:


Control and Monitoring Platform (CAMP)
Cummins® QSK 19-C 1,008 kW 1,350 HP
• New Board Control System (BCS III)
Standard Bucket Capacity
• Torque control in closed-loop swing circuit
Face Shovel (SAE 2:1) 16.5 m3 21.6 yd3
• Automatic central lubrication system
Backhoe (SAE 1:1) 17.0 m3 22.2 yd3
• Xenon working lights

Product Specification Sheet


Operating Weight Diesel Engines
Shovel Version 1 - Caterpillar®
Standard track pads 1,000 mm (3 ft 3 in) Make and model 2 x Caterpillar C27
Operating weight 287,000 kg (632,720 lb) Total rated net power ISO 3046/1 1,140 kW (1,530 HP) 1,800 min-1
Ground Pressure 21.5 N/cm2 (31.1 psi) Total rated net power SAE J1349 1,140 kW (1,530 HP) 1,800 min-1
Further track pads on request Total rated gross power SAE J1995 1,140 kW (1,530 HP) 1,800 min-1

Backhoe No. of cylinders (each engine) 12

Standard track pads 1,000 mm (3 ft 3 in) Bore 137.7 mm (5.42 in)

Operating weight 289,700 kg (638,670 lb) Stroke 152.4 mm (6.0 in)

Ground Pressure 21.7 N/cm2 (31.4 psi) Displacement 27.0 I (1,648 in3)

Further track pads on request Aspiration Turbocharged and charge air-cooled


Max. altitude without deration 1,525 m (5,000 ft) a.s.l.
Emission certification US EPA Tier 2; Europe NRMM Tier 2
Electrical System (diesel drive)
Alternators 2 x 150 A
System voltage 24V
Fuel tank capacity 5,360 I (1,416 US gal)
Batteries (12V each) 4 x 244 Ah
in series / parallel installation 488 Ah - 24 V
Version 2 - Cummins®
Make and model 2 x Cummins QSK 19-C
Working spot lights 8 x high brightness Xenon lights
Total rated net power ISO 3046/1 1,008 kW (1,350 HP) 1,800 min-1
• Battery isolation relays
• Emergency stop switches accessible from ground level, in engine Total rated net power SAE J1349 1,008 kW (1,350 HP) 1,800 min-1
module and in operator’s cab Total rated gross power SAE J1995 1,008 kW (1,350 HP) 1,800 min-1
No. of cylinders (each engine) 6

Hydraulic Oil Cooling Bore 159 mm (6.25 in)

Oil flow of cooling pumps Stroke 159 mm (6.25 in)


Diesel version 2 x 467 l/min (2 x 123 US gal/min) Displacement 19 I (1,159 in3)
Electric version 2 x 459 l/min (2 x 121 US gal/min)
Aspiration Turbocharged and charge air cooled
Diameter of fans 2 x 1,220 mm (2 x 48’’)
Max. altitude without deration 1,500 m (4,900 ft) a.s.l.
• Cooling system is fully independent of all main circuits, i.e. controlled
Emission certification US EPA Tier 2; Europe NRMM Tier 2
cooling capacity is available whenever engine is running
• Gear-type cooling pumps supplying high-volume, low-pressure oil to Alternators 2 x 175 A
fans and aluminium coolers Fuel tank capacity 5,360 I (1,416 US gal)
• Variable axial piston pumps supplying low-volume, high-pressure oil
to fans
• Fan speed is thermostatically controlled Hydraulic System with PMS
• Extremely high cooling efficiency to ensure optimum oil temperature Main pumps (Diesel and electric version) 4 x variable swash plate pumps
Max. oil flow Diesel version 4 x 552 I/min (4 x 146 US gal/min)
Electric version 4 x 543 I/min (4 x 143 US gal/min)
Electric Motor (optional)
Max. pressure, attachment 31 MPa = 310 bar (4,495 psi)
Type Squirrel cage induction motor
Max. pressure, travel 37 MPa = 370 bar (5,365 psi)
Output 1,000 kW Swing pumps Diesel version 2 x reversible swash plate double pumps
Voltage 6.3 kV +/- 10% (other on request) Electric version 2 x reversible swash plate pumps
Rated Current IN 109 A (at 6.3 kV) Max. oil flow Diesel version 2 x 394 I/min (2 x 104 US gal/min)
Frequency 50 Hz (60 Hz optional) Electric version 2 x 426 I/min (2 x 113 US gal/min)

Revolutions 1,500 min-1 (1,800 min-1 optional) Max. pressure, swing circuit 35 MPa = 350 bar (5,080 psi)
Total volume of hydraulic oil Approx. 3,500 I (925 US gal)
Starting current 450% of IN (350% of IN optional)
Hydraulic tank capacity Approx. 2,500 I (660 US gal)
• Custom-made electric motor with increased gap between rotor and
• Pump Managing System (PMS) contains:
stator to withstand severe mining conditions
• Electronic load limit control
• Power limit control by Pump Management System
• Flow on demand from main pumps depending on joystick position
• Automatic regulation of main pumps to zero flow without demand
• Automatic rpm reduction of engine speed during working breaks
Diesel Engines • Reduced oil flow of main pumps at high hydraulic oil temperature or
Engine Features at high engine temperature
• Pressure cut-off for main pumps
• Hydraulically driven radiator fan with electronically controlled fan
• Cooling of pump transmission gear oil
speed
• Filters:
• Microprocessed engine management
• Full-flow high-pressure filters (100 µm) for the main pumps, installed
• Automatic rev. reduction
directly behind each pump
• Heavy-duty air filters
• High pressure filters (100 µm) for the closed swing circuit
• Two-stage fuel filter, incl. water separator
• Full-flow filters (10 µm) for the complete return circuit
• Additional high-capacity water separator
• Full-flow filters (10 µm) for the cooling return circuit
• Pre-lube starting system (Cummins engines only)
• Pressure filters (40 µm and 6 µm) for servo circuit
• Transmission oil filters (40 µm)
Undercarriage Attachments
Travel speed (2 stages) 1st stage Max. 1.4 km/h (0.87 mph) • Booms and sticks are torsion-resistant, welded box design of high-
2nd stage Max. 2.7 km/h (1.68 mph) tensile steel with solid steel castings at pivot areas
Max. tractive force 1,680 kN (171 t = 377,770 lb) • Welding procedures allow for internal counter-welding (double prep
weld) wherever possible
Gradability of travel drives Approx 72 % • Booms and sticks are stress-relieved after welding
Track pads (each side) 47 • Catwalks with rails at boom (FS and BH)
• Pressure-free lowering of boom (FS and BH) and stick (FS) by means
Bottom rollers (each side) 7
of a float valve
Support rollers (each side) 2 plus a skid plate in between • Shovel attachment with patented TriPower kinematics ensuring the
Travel drives (each side) 1 planetary transmission with following main features:
2 two-stage axial piston motors • Horizontal automatic constant-angle bucket guidance
• Vertical automatic constant-angle bucket guidance
Parking brakes Wet multiple disc brake,
• Automatic roll-back limiter to prevent material spillage
spring loaded / hydraulically released
• Kinematic assistance to hydraulic forces
• Cast double-grouser combined pad-links with bushings connected by • Constant boom momentum throughout the whole lift arc
hardened full floating pins • Crowd force assistance
• All running surfaces of sprockets, idlers, rollers and pad links as well • All buckets (FS and BH) are equipped with a universal wear package
as teeth contact areas of sprocket and pad links are hardened suitable for all standard applications, which consists of:
• Fully hydraulic self-adjusting track tensioning system with membrane • Special liner material covering main wear areas inside and outside of bucket
accumulator • Lip shrouds between teeth
• Automatic hydraulic retarder valve to prevent over-speed on downhill • Wing shrouds on side walls
travel • Heel shrouds at bottom edges
• Acoustic travel alarm • Special wear packages for highly abrasive materials on request

Operator’s Cab Automatic Lubrication System


Operator’s eye level approx. 6.5 m (21 ft in) Capacity of grease container 450 l (120 US gal)
Internal dimensions of cab Length 2,200 mm (7 ft 3 in) • Dual-circuit system with hydraulically driven heavy-duty pump and
Width 1,600 mm (5 ft 3 in) electronic time relay control to adjust the pause / lube times
Height 2,150 mm (7 ft 1 in) • Connected to the lubrication system are the swing roller bearing
• Pneumatically cushioned and multi-adjustable comfort seat with lumbar with internal gearing and all pivot points of attachment, bucket and
support, seat heating, safety belt, head and arm rests cylinders
• Switch in seat cushion to neutralize automatically the hydraulic controls • System failures displayed by Board Control System
when operator leaves the seat • Grease filters (200 μm) between service station and container as well
• Joystick controls integrated in independently adjustable seat consoles as directly behind grease pump
• Fold-away auxiliary seat with safety belt
• FOPS (rock guard; approved acc. to DIN ISO 3449) integrated into cab
structure Retractable Service Station
• All-round safety glass, armored windshield and sliding side window Retractable service station installed underneath the engine module
• Windshield with parallel intermittent wiper / washer and easily accessible from ground.
• Roller blind at windshield Equipped with:
• New Board Control System (BCS III): Electronic monitoring, data • Quick couplings for
logging and diagnostic system for vital signs and service data of • Diesel fuel
engines, hydraulic and lubrication system, featuring: • Engine coolant - left / right
• Robust instrument panel including large (12 in) colored touch • Pump transmission gear oil - left / right
screen forintuitive handling • Engine oil (oil pan) - left / right
• On-screen PDF documentation (e.g., operating instructions, • Engine oil (additional tank - optional) - left / right
technical handbook) • Hydraulic oil tank
• On-screen troubleshooting assistance • Grease container
• Graphic charts of logged data • CAT jump-start socket
• Fault memory with storage of related conditions • Indicator lights for fuel tanks left/right full and grease container full
• USB, Lan (TCP/IP) and CAN BUS interfaces for data export
• Machine access via retractable boarding ladder, hydraulically operated
• Emergency exit harness kit

Swing System
Swing Drives 2 compact planetary transmissions
with axial piston motors
Parking Brake Wet multiple-disc brake,
spring-loaded / hydraulically released
Max. swing speed Diesel Version 4.7 rpm
Electric Version 5.1 rpm
Swing ring Triple-race roller bearing
with sealed internal gearing
• Closed-loop swing circuit with torque control
• Hydraulic braking of the swing motion by counteracting control
• All raceways of swing ring as well as grease bath for internal gearing
supplied by automatic, central lubrication system
TriPower Face Shovel Attachment (FS)
Working Diagram - Boom 6.2 m (20 ft 4 in) - Stick 4.4 m (14 ft 5 in)

ft m
14
45
13

40 12

11
35
10

30 9

8
25
7

20 6

5
15
4

10 3

2
5
1

0 0

1
5
2

10 3
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m

50 45 40 35 30 25 20 15 10 5 0 ft

Working Range Digging Forces


Max. digging height 13.9 m 45 ft 7 in Max. crowd force 1,370 kN 307,880 lb
Max. digging reach 13.7 m 44 ft 11 in Max. crowd force at
1,210 kN 271,920 lb
Max. digging depth 2.5 m 8 ft 2 in ground level

Max. dumping height 10.7 m 35 ft 1 in Max. breakout force 920 kN 206,750 lb

Crowd distance on level 4.9 m 16 ft 1 in

Face Shovels
Type Iron ore shovel Iron ore shovel Heavy rock shovel Heavy rock shovel Standard rock shovel
Tooth system ESCO S 95 ESCO S 95 ESCO S 95 ESCO S 95 ESCO S 95
Capacity 11.6 m3 13.9 m3 15.4 m3 17.0 m3 19.0 m3
SAE/PCSA 1:1 (15.2 yd3) (18.2 yd3) (20.1 yd3) (22.2 yd3) (24.9 yd3)
Capacity 10.0 m³ 12.0 m³ 13.5 m³ 15.0 m³ 16.5 m³
SAE / CECE 2:1 (13.1 yd³) (15.7 yd³) (17.7 yd³) (19.6 yd³) (21.6 yd3)
Total width 3,620 mm (11 ft 11 in) 3,900 mm (12 ft 10 in) 3,900 mm (12 ft 10 in) 3,900 mm (12 ft 10 in) 3,900 mm (12 ft 10 in)
Inner width 3,220 mm (10 ft 7 in) 3,500 mm (11 ft 6 in) 3,500 mm (11 ft 6 in) 3,500 mm (11 ft 6 in) 3,500 mm (11 ft 6 in)
Opening width 1,680 mm (5 ft 6 in) 1,790 mm (5 ft 10 in) 1,790 mm (5 ft 10 in) 1,790 mm (5 ft 10 in) 1,790 mm (5 ft 10 in)
No. of teeth 5 6 6 6 6
Weight incl. 23,400 kg 26,700 kg 27,300 kg 27,500 kg 27,900 kg
universal wear kit (51,590 lb) (58,860 lb) (60,190 lb) (60,630 lb) (61,510 lb)
Max. material 3.2 t/m3 2.5 t/m3 2.2 t/m3 2.0 t/m3 1.8 t/m3
density (loose) (5,390 lb/yd3) (4,210 lb/yd3) (3,710 lb/yd3) (3,370 lb/yd3) (3,030 lb/yd3)
Backhoe Attachment (BH)
Working Diagram - Boom 8.5 m (27 ft 11 in) - Stick 4.0 m (13 ft 9 in)

m
ft 16
50
15

45 14

13
40
12

35 11

10
30
9

8
25
7
20 6

5
15
4
10 3

2
5
1

0 0

1
5
2

10 3

4
15
5

20 6

7
25
8
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m

60 55 50 45 40 35 30 25 20 15 10 5 0 ft

Working Range Backhoes


Max. digging depth 6.1 m 2 ft 0 in Type Iron ore bucket Heavy rock bucket Standard rock bucket
Max. digging reach 15.1 m 49 ft 6 in Tooth system ESCO V 81 ESCO V 81 ESCO V 81
Max. digging height 14.1 m 46 ft 3 in Capacity SAE 1:1 12.0 m3 (15.7 yd3) 15.0 m3 (19.6 yd3) 17.0 m3 (22.2 yd3)
Capacity CECE 2:1 10.9 m3 (14.3 yd3) 13.6 m3 (17.8 yd3) 15.3 m3 (20.0 yd3)
Digging Forces Capacity struck 9.6 m3 (12.6 yd3) 12.3 m3 (16.1 yd3) 13.5 m3 (17.7 yd3)
Max. crowd force 880 kN 197,760 lb Total width 3,450 mm (12 ft 2 in) 3,700 mm (12 ft 2 in) 4,080 mm (13 ft 5 in)
Max. breakout force 870 kN 195,520 lb Inner width 3,000 mm (9 ft 10 in) 3,310 mm (10 ft 10 in) 3,690 mm (12 ft 1 in)
No. of teeth 5 5 6
Weight incl. 16,400 kg 16,900 kg 18,000 kg
universal wear kit (36,160 lb) (37,260 lb) (39,680 lb)
Max. material 2.5 t/m3 2.0 t/m3 1.8 t/m3
density (loose) (4,210 lb/yd3) (3,030 lb/yd3) (3,030 lb/yd3)
General Packing List
Crawler side frame with track pads (2 units) Undercarriage center frame with swing roller bearing
Width 1,550 mm (5 ft 1 in) Gross weight 36,800 kg (81,130 lb) Width 3,800 mm (12 ft 6 in) Gross weight 25,000 kg (55,120 lb)

5 in)

in)ft 1 in)
(6’5’’)

in) (6’1’’)
in)ft
5ft(6’5’’)
ft 5(6’5’’)
mm5 (6

1ft(6’1’’)
ft 1(6’1’’)
1 (6
mm
in)
in)

in)
(6mm

(6mm
1,950

mm 1,850
mm
mm

mm
mm
ft

ft
1,950

1,850
mm (6

(6
mm(6

mm(6
1,950
1,9501,950

1,850
1,8501,850
mm

mm
1,950

1,850
7,700
7,700 mm mm
(25(25’3’’)
ft 3 in) 5,550mm
5,550 mm(18
(18’3’’)
ft 3 in)

1,950

1,850
7,700
7,700
7,700 mm
mm mm(25’3’’)
(25 (25’3’’)
ft 3 in) 5,550
5,550
5,550 mm
mmmm
(18’3’’)
(18(18’3’’)
ft 3 in)
7,700
7,700 mmmm(25(25
ft 3ftin)
3 in) 5,550
5,550 mmmm(18(18
ft 3ftin)
3 in)
Superstructure center frame Engine module with diesel engines
Width 3,120 mm (10 ft 3 in) Gross weight 37,300 kg (82,230 lb) Width 5,300 mm (17 ft 5 in) Gross weight C27 24,200 kg (53,350 lb)
Gross weight QSK 19 22,700 kg (50,040 lb)

in)ft 2 in)
in)ft 6 in)

2 in)(10’2’’)
in) (9’6’’)

2(10
(10’2’’)
(10 ft(10’2’’)
6 (9
(9’6’’)
ft 6(9’6’’)

2ftin)
mm

mm
in)

mm
(9mm
6ft

(10(10
mm 2,900

ft
mm3,100
mm
mm

mm
mm
ft

3,100
2,900
(9

mm
mm
2,900(9
2,9002,900

mm
3,100
3,100
mm

3,100
2,900

3,100
3,100
2,900
8,520
8,520 mmmm (27’11’’)
(27 ft 11 in) 3,700
3,700 mmmm
(12 (12’2’’)
ft 2 in)
8,520
8,5208,520
mm mmmm(27’11’’)
(27 ft(27’11’’)
11 in) 3,700
3,7003,700
mm
mm mm(12’2’’)
(12 ft(12’2’’)
2 in)
8,520
8,520 mm mm(27(27 ft 11
ft 11 in)in) 3,700
3,700 mmmm(12(12
ft 2ftin)
2 in)

Cab pedestal module Oil cooler module


Width 2,000 mm (6 ft 7 in) Gross weight 4,830 kg (10,650 lb) Width 1,550 mm (5 ft 1 in) Gross weight 4,600 kg (9,480 lb)

in)ft 6 in)
ft 6 in)
in)ft 4 in)
4 in)ft 4 in)

6 in)
ft 6(9
in)
6 (9
4in)

6mmin)
(10
4(10

(9mm ftin)
ft
4ftin)
4ftftin)

(9
(9 ft (9
6
mm
mm

mm2,900
mm
mm
(9 ft
(10
(10(10
(10(10
ft

2,900
ft

mm
3,150
3,150
mm
mm

mm
mm

2,900
2,900
mm

2,900
mm
3,150
3,150

2,900
3,150

2,900
3,150
3,150

3,640mm
mm(11
(11ftft11
11in)
in) 3,900 mm
3,900 (12(12
mm ft 10 in)in)
ft 10
3,640

3,640
3,640
mm mm
(11 3,900
3,900 mmmm(12(12 ft 10
ft 10 in)
in) in)
3,640 mm (11(11
ftft11
ft
1111
in)
in)in) 3,900
3,900 mm mm
(12(12 ft 10
ft 10 in)in)
3,640
3,640 mm mm(11(11 ft 11
ft 11 in)in)
Crate with cabin and FOPS Counterweight incl. radiators
Width 2,610 mm (8 ft 7 in) Gross weight 3,800 kg (8,380 lb) Width 5,300 mm (17 ft 5 in) Gross weight 33,500 kg (73,850 lb)
ft 10 in)
in)ft 1 in)

ft 10 in)
in) (10’1’’)

(9in)
(9in)
in)
1(10
(10’1’’)
mmft(10’1’’)

in)
in)
10
ft 10
mm

ft 10
1ftin)

(9mm
ftmm
10
mm

10
1

ft
(10

(9 (9
ft

(9
mm3,070

(9 ft
mm

3,000
3,000
(10
(10

mm
mm
3,070

mm
mm

mm
mm
3,070
3,0703,070
mm

3,000
3,000
3,070

3,000
3,000
3,070

3,500
3,500 mmmm
(11(11’6’’)
ft 6 in) 1,200 mm
mm (3
(3 ft
ft 11
11 in)
in)
1,200
3,500
3,500
3,500 mm
mm mm
(11’6’’)
(11 (11’6’’)
ft 6 in)
Crates 3,500 mm
1,200
1,200
1,200mmmm
mm (3(3ft(3ft11
ft11
11
in)in)
in)
3,500 mm (11(11
ft 6ftin)
6 in) 1,200
1,200 mm mm(3 (3 ft 11ft 11
in)in)
Content Length Width Height Gross Weight
Height

Grease container with pump 1,600 mm (5 ft 3 in) 1,100 mm (3 ft 7 in) 2,070 mm (6 ft 9 in) 930 kg (2,050 lb)
Barrels (hydraulic oil; grease; antifreeze) 2,700 mm (8 ft 10 in) 1,400 mm (4 ft 7 in) 1,120 mm (4 ft) 1,500 kg (3,310 lb)
Swing ring cover 2,200 mm (7 ft 3 in) 1,300 mm (4 ft 3 in) 1,020 mm (3 ft 4 in) 370 kg (820 lb)
Length
Retractable ladder 4,500 mm (14 ft 9 in) 1,200 mm (3 ft 11 in) 2,070 mm (6 ft 9 in) 1,140 kg (2,510 lb)

Above values are approximate. Details may vary depending on scope of supply and destination. Exact data subject to selected machine configuration and final packing list.
TriPower Shovel Attachment
Boom with main valve block, TriPower linkages and rods Stick
Width 2,600 mm (8 ft 6 in) Gross weight 26,400 kg (58,200 lb) Width 1,840 mm (6 ft) Gross weight 9,000 kg (19,840 lb)

2,850 mm (9’4’’)
ft 4 in)

1,900 mm (6’3’’)
in)(6 ft 3 in)
in)4(9in)

mm (6 ft 3 in)
ft 4 in)
ft 4 in)

1,900 mm (6 ft 3 in)
ft 3 in)
(9(9’4’’)
(9(9ftft4(94in)
(9mm
ft

1,900 mm (6’3’’)
(6(6ftft33in)
2,850 mm (9 ft 4 in)

(6mm
(6 ft 3 in)
mm
2,850
mm
2,850 mm (9 ft 4 in)

1,900
mm

1,900 mm (6 ft 3 in)
2,850 mm

1,900 mm
ft 4 in)
mm

ft 3 in)
(92,850
mm

mm
2,850

1,900mm
mm (61,900
2,850 mm 2,850

mm
2,850
2,850
6,7006,700 mmft(21’12’’)
mm (21 12 in) 4,950
4,950 mm (16mm
ft 3 (16’3’’)
in)

1,900
1,9001,900
6,700 mm (21 ft 12 in) 4,950 mm (16 ft 3 in)
6,7006,700
Face and shovel incl. pinmm
mm ft(21
for
(21 ftin)12 in)
12stick 4,9504,950
Crates with catwalks, mm mm ft(16
railings
(16 ft 3 in)and other parts
3 in)
6,7006,700
mm (21
(21
mmftft(21’12’’)
12 in)
in) 4,950 mm (16 ft 3 in)
4,950 4,950
mm mm3(16’3’’)
6,700
6,700 mmmm(21 ft 12 12
in) 4,950 mm (16(16
ft 3ftin)in)
Capacity (2:1) Width
6,700 mm (21 ft 12 in) Gross weight Length 4,950 mmWidth
(16 ft 3 in) Height Gross weight
6,700 mm (21 ft 12 in) 4,950 mm (16 ft 3 in)
15.0 m3 (19.6 yd3) 3,900 mm (12 ft 10 in) 28,200 kg (62,170 lb) 3,900 mm (12 ft 10 in) 1,600 mm (5 ft 3 in) 1,250 mm (4 ft 1 in) 1,300 kg (2,870 lb)
16.5 m3 (21.6 yd3) 3,900 mm (12 ft 10 in) 28,600 kg (63,050 lb) 4,500 mm (14 ft 9 in) 1,900 mm (6 ft 3 in) 1,740 mm (5 ft 9 in) 2,400 kg (5,290 lb)

ft 10 in)
ft 6 in)

mm (11’10’’)
ft 10(10’6’’)
in)in)
in)6 in)

in)
in)
ft 6 in)

Height
ft 6(10
10
16.5 m³ = 3,300 mm (11 ft 10 (11
in)
10ftin)

mm
in)

Height
ft
ft66in)
in)
6 in)
mm
15.0 m³ = 3,200 mm (10 ft 6 in)

Height
(11’10’’)
10 in)
(11ftmm
(10
ft10
(10’6’’)
in)

Height
(11

Height
ft10

(10
(10ftft10
ft(10

ft (11
= 3,200
3,300

Height
6
(10
3,200
mm

Height
3,300
mm
(10

mm ft

Height
Height
(11
= mm

mm

Height
mm (11
(11

mm(10
(11

Height
mm

mm
mm
mm
3,200

m³ =
mm
3,300
3,300 mm

3,200
mm

Length
= mm
3,200

3,300
16.5mm
=
3,200

3,200

15.0 m³ = 3,650 mm (12 ft) 3,300



Length
3,300
3,200

15.0
3,300
3,200
m³==3,200

3,300 LengthLength
=3,300

16.515.0
m³ =m³3,750
= 3,650
mmmm (12(12’)ft 4 in)
=
15.0
=
16.5
=

=
Length

15.0 m³15.0
= 3,650 =mm (12(12’4’’)
ft) (12 ft)

16.5 m³ =m³
3,750 mm
=m³=

3,650 mm
=
=m³ =

Length
m³=m³

15.0 m³ = 3,650 mm (12 ft)


m³==

Length Length
Length
m³m³

16.5 m³ = 3,750 mm (12 ft 4ft) in)


15.0

Length
16.5

15.0 m³
15.016.5 = 3,650
=m³ mm
= 15.0
3,750 (12
mm (12 ft 4 in)
15.0

16.5
15.0 m³==

m³ 3,650
3,750
3,650 mm
mm
mm m³(12
(12
(12 ft)
ftft)
= 3,650 4 in)
mm (12 ft)
15.0

16.5
16.5m³


16.5m³

15.0 m³ ===3,650 mm (12 ft) Length


15.0

16.5

16.5 m³ 3,750 mm (12 ft 4 in)


15.0

16.5 m³ 3,750 mm
16.5 m³(12= ft 4
3,750 in)mm (12 ft 4 in)
15.0

16.515.0
m³ m³ = 3,650
= 3,750 mm mm(12ft(12’)
4ftin)
4 in)
15.0

16.5
16.5

16.5 m³ = 3,750 mm (12


15.0
16.5

16.5 m³ = 3,750 mm
Bundle with 2 stick cylinders (12’4’’) Bundles with 2 bucket cylinders
ft 0 in)

ft 0 in)
Width 1,100mm (3 ft 7 in) Gross weight 3,800 kg (8,380 lb) Width 1,100 mm (3 ft 7 in) Gross weight 3,800 kg (8,380 lb)
in)0(2in)

in)0(2in)
600 mm (2 ft 0 in)

600 mm (2 ft 0 in)
ft 0 in)

ft 0 in)
600 mm (2 ft 0 in)

(2 ft(20 ftin)0 in)


600 mm (2 ft 0 in)

600 mm (2 ft 0 in)
(2(2ftft0(20in)

(2(2ftft0(20in)
(2mm

(2mm
ft

ft
600 mm (2’)
600 mm (2 ft 0 in)

600 mm (2’)
4,050 mm (13 ft 3 in)
mm

mm
3,950 mm (13 in)
mm600

mm600
600 mm
600 mm

600 mm
4,050 mm (13’3’’)
4,050 mm (13mmft 3(13
in) ft(13 3,950mm mm(13
(13’’)
mm

mm
3,950 in)
600600

600600
ft 3 in) 600 mm (2’)

600 mm
4,050 4,050
mm
4,050 (134,050
mm ft 3 in)
(13 3 in) 3 in)
ftmm 3,950 mm (13 in)3,950
3,950
3,950 mm mm
mm(13
(13 (13 in)
in)in) 600 mm (2’)
4,050 mm
4,050 mm (13 ftft 33 in)
in) 3,950 mm
mm (13
(13 in)
in)
mm (13(13 3,950
600

600
4,050 ft 3 in) 3,950 mm (13 in)
Backhoe Attachment
4,050 mm (13’3’’) 3,950 mm (13’’)
Monoboom without main valve block Stick with linkage and bucket cylinders
Width 2,700 mm (8 ft 10 in) Gross weight 32,700 kg (72,090 lb) Width 2,100 mm (6 ft 11 in) Gross weight 16,200 kg (35,710 lb)

ft 7 in)
in)ft 6 in)

7 in)(7 ft 7 in)
(126 ftin)6 in)

2,300 mm (7 ft 7 in)

in)7(7in)
3,800 mm (12 ft 6 in)

in)6 in)

ft 7 in)
ft 7 in)
3,800 mm (12’6’’)

(7(7’7’’)
ft 6(12

(7(7ftft7(77in)
(7mm
ft
ft66in)
ft
3,800 mm (12 ft 6 in)

(7 ftmm
mm
(12 ft
(12ft(12

mm
mm mm

2,300
mm
(12

mm
2,300 mm2,300
2,300 mm
3,800
mm

3,800 mm (12’6’’)
(12

2,300 mm (7’7’’)
3,8003,800

mm

2,300
3,800 mm

mm
2,300

2,300
mm
mm
3,800

2,300
6,000mmmm(19(19ft ft 8 in)

2,300
6,000 8 in)
3,800

6,000 mm (19 ft 8 in)


3,800

9,4009,400
mm 9,400
(30 ft(30’10’’)
10 in)
mm (30 ft 10 in) 6,000 mm
6,000(19 ft 8(19in) ft 8 in)
9,400 mm (30 mm
ft 10 in) 6,000
6,000 mmmm
mm (19 ft 8 in)
(19’8’’)
6,000 mm
6,000 mm (19(19 ft
ft 88 in)
in)
9,400
Backhoeincluding
bucket mm (30
including ft 10 in)
pins
ftin)10for sticklinkage
and linkage Crates with catwalks, railings and other parts
6,000 mm (19 ft 8 in)
Backhoe bucket
Backhoe bucket including9,400 pins
9,400
mm (30for
mm ft(30
10stick and
in)
CratesCrates with catwalks, railings and other parts
9,400 pins
9,400 mm (30
mm
for
(30 ft stick
ft in) and linkage
10 in)
10
with catwalks, railings and other parts
Backhoe bucket including
Backhoe bucket
9,400 mm pins
(30mm
9,400
including
ftfor
10 stick and linkage
in)
(30’10’’) Crates with with
catwalks, railings and
6,000 mm other
(19’8’’) parts
Backhoe bucket including pinspins
for for stick
stick andand linkage
linkage Crates
Crates catwalks,
with catwalks, railings
railings andand
other other parts
parts
Backhoe bucket
Backhoe
Backhoe bucket
bucketincluding pins for
incl. pins
including pins for stick
forstick
stickand linkage
and
and linkage
linkage Crates
Crates
Crates withwith
with catwalks, railingsrailings
catwalks,
catwalks, railings and other
and otherandpartsother parts
parts
Backhoe bucket including pins for stick and linkage Crates with catwalks, railings and other parts
Capacity (1:1) Width Gross weight Length Width Height Gross weight
15.0 m (19.6 yd )
3 3
3,700 mm (12 ft 2 in) 18,000 kg (39,680 lb) 4,950 mm (16 ft 3 in) 1,900 mm (6 ft 3 in) 1,900 mm (6 ft 3 in) 2,500 kg (7,050 lb)
in) (9 ft 6 in)

Height
2,900 mm (9 ft 6 in)

in)ft 6 in)

Height

HeightHeight

17.0 m3 (22.2 yd3) 4,100 mm (13 ft 5 in) 19,100 kg (42,110 lb) 3,000 mm (9 ft 10 in) 1,250 mm (4 ft 1 in) 1,350 mm (4 ft 5 in) 1,550 kg (3,420 lb)
ft 6(9’6’’)
in)6(9in)

ft 6mm

Height

Height
Height
(9(9ftft6(96in)
mm

2,900

Height
ft
(9mm
2,900 mm (9 ft 6 in)

HeightHeight
Height

Length
2,900 mm (9
(9’6’’)
2,900
mm

15 m³ = 3,650 mm (13 ft)


2,900

Length
mm

17mm
15 m³ = 3,650 m³ =(13
3,700
ft) mm (12 ft 2 in) Length
mm
mm
2,900

17 m³ = 3,700 mmmm
15 m³ = 3,650 (12 ft(13 ft)
mm

2 in)
2,900

LengthLength
2,900

17 m³ 15
= 3,700 mm (12
m³ = 3,650 mm ft (13’)
2 in) Length
Length
2,900
2,900

15 m³17=153,650
m³ =mm
= 3,700 (13mm
mm ft)
(12’2’’) Length
17 1515=m³
m³ =m³
3,700 3,650
mm
3,650
mm
(12 (13
ft 2
(13 ft)
ft)
in) Length
Length
17
15 m³

m³ =m³
17== 3,650
3,700
3,650 mmmm
= 3,700
mm
mm (13ftft)
(12
(13 ft)
(12 ft 2 in)
2 in)
15 m³
17 m³ =
m³ = 3,650
= 3,700 mm
3,700 mm (13
mm (12 ft)
(12 ftft 22 in)
in)
1717
m³ =15 m³ =mm3,650
(12mm ft 2 (13’) Length
610 mm (2 ft 0 in)

3,700 in)
17 m³ = 3,700 mm (12’2’’)
610 mm (2 ft 0 in)

Bundle with 2 stick cylinders


ft 0 in)
in)0(2in)

Width 1,200mm (3 ft 11 in) Gross weight Above values are approximate. Details may vary depending on scope
ft 11 in)6,350 kg (14,000 lb)
610 mm (2 ft 0 in)

4,250 mm (13
ft 0 in)

610 mm (2’) of supply and destination. Exact data subject to selected machine
(2(2ftft0(20in)
(2mm
ft

4,250 mm (13 ft 11 in) configuration and final packing list.


610 mm (2 ft 0 in)
mm
mm610

4,250 mm (13 ft 11 in)


610 mm

4,250 mm (13’11’’) 610 mm (2’)


mm
610610

4,250 mm (13 ft 11 in)


4,2504,250
mm mm(13 ft(13
11ftin)11 in)
4,250 mm
mm (13
(13 ft
ft 11
11 in)
in)
610

4,250
4,2504,250
mm (13mmft (13’11’’)
11 in)
Component accessibility on superstructure
1. Diesel Engines 4. Oil coolers 7. Rotary distributor 10. Operator’s seat

2. Gearboxes with hydraulic pumps 5. Hydraulic tank 8. Travel valves 11. BCS tower

3. Engine radiators with hydraulically driven fan 6. Swing drives 9. Batteries 12. Auxilliary seat

4 4 2 1
3

7
8 5
6 9

2 1 3

11

10 12
Anti-slip walking areas

Anti-slip catwalks

Optional Equipment
General Cab
• Export Crating • Various heating and air-conditioning systems
• Finishing as per end user´s corporate colors • Roller blinds at all windows
• Customizing of logos as per customer’s specification • Outside-mounted sun shields

Superstructure • Rear windscreeen wiper

• Mechanical service crane on superstructure • Additional instrumentation

• Hydraulic service crane on superstructure with auxilliary engine Undercarriage


• Oil change interval extension for engine oil up to 1000 hrs (Cummins engines only) • Track pad width 800 mm or 1,200 mm
• Engine oil burn system (Cummins engines only) • Automatic lubrication of rollers by central lube system
• Centrifuges for engine oil filtration (Cummins engines only) • Cover plate under carbody (belly plate)

• Folding access stairway, stairway angle approx. 45° Attachment


• Round container with a standard 200 l grease barrel (instead of 450 l grease container) • Guards for shovel cylinders of FS-attachment
• Lubricated pinion for greasing of internal gearing of swing ring • Xenon lighting on boom
• Various cold-weather packages • Special wear packages
Further optional equipment on request

Effective Date: February 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer
to appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result
in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Bucyrus makes no other warranty, express or implied.
Bucyrus is a registered trademark of Bucyrus International, Inc. in the USA and many other countries. Copyright 2010 Bucyrus International, Inc.

You might also like