You are on page 1of 14

Type Series Booklet

Nº A2744.0.1E/1 KSB Megabloc

General service centrifugal pump

Line : Mega
Version : Bloc

1. Application 3. Designation

The KSB Megabloc pumps are suitable for pumping KSB MEGABLOC 32-125 + 2 . 2
clean or turbid liquids and mainly used in the following
applications: Trade Mark

- Water supplies for industries Model / Type


- Irrigation
- Circulation of condensate Nom Discharge nozzle diameter (mm)
- Building Trade Centers
- Air conditioning Nominal Impeller diameter (mm)
- Cooling services
Motor Out Put (HP)

Number of poles
2. Design
4. Operating data
Horizontal, single stage, end suction with top centerline
discharge, close coupled to electric motor. Size - 1” to 6” (DN 25 to 150)

Flow - to 2200 GPM (500 m3/h)

Head - to 426 ft (130m)

Maximum temperature - 194ºF (90ºC)

Maximum suction pressure - 43 psi (3 bar)

Maximum discharge pressure - 190 psi (13 bar)

Speed - to 3600 rpm


Megabloc

5. Selection Charts 60 Hz

Fig 1

2
Megabloc

Figure 2

3
Megabloc

6. Technical data
6.1. Casing
Single stage casing with standard vertical discharge. Suction and discharge are flanged (ANSI B16. 1 125 # FF). See note 1).
The casing is fixed to the discharge cover / adapter in such a way to assure their perfect alignment.
Radial split casing, “back-pull-out” design that allows the disassembly of the pump without dismantling the suction and
discharge pipelines.
Standard material: Cast iron
Optional material: Stainless steel

6.2. Impeller
Single suction closed, radial flow impeller directly driven by the motor shaft. Impeller is just one piece casting, keyed and
bolted to motor shaft. Its diameter must be selected through the performance curves (see item 10).
Standard material: Cast iron
Optional material: Stainless steel

6.3. Adapter / Discharge cover


It assures the alignment of the pump casing to motor flange.
Standard material: Cast iron
Optional material: Stainless steel

6.4. Rotation direction


Clockwise, seen from motor end.

6.5. Mechanical seal


Standard for water up to 194ºF (90ºC) as well as for most hydrocarbons. For others temperatures and liquids, please consult
KSB.
Standard materials: carbon / stainless steel or ceramic / stainless steel
Optional material: tungsten carbide / tungsten carbide

6.6. Shaft protecting sleeve


Extended, covering the shaft sealing area, preventing the contact of the pumped liquid with the shaft.
Standard material: Stainless steel
Optional material: AISI 316

6.7. Electric motor


Supplied as part of the assembly.
Nema MG 1Motors with JM shaft end. (See note 2). Motor efficiencies according to Epact. Ball bearings are dimensioned to
support the axial and radial loads acting on the motors.
Motor pump set is supported by motor feet.

Remark: In case of altitude higher than 3,280 ft (1000 m) and / or temperature over 104ºF (40ºC), please consult KSB.

Protection system: TEFC/ IP55


Insulation glass: F
Service factor: 1.25
Speed: 3600 rpm, 1800 rpm
Phases / frequency: 3/60 HZ
Voltage: 208 - 230 / 460 V (also available in 575V for Canada)

1) ANSI B16.1 250 # FF for sizes 40-250; 50-250; 50-315; 65-250; 80-250.
2) JP shaft end for sizes 125-200 and 150-200 (25 and 30 Hp). 4
Megabloc

7. Section drawing / Part list


7.1 KSB Megabloc – Flanged – 2 pole motors up to 15 HP, and 4 pole motors up
to 60 HP

Fig. 3

5
Megabloc

7.2. KSB Megabloc - Flanged – 2 pole motors above 15 HP

Fig. 4

6
Megabloc

7.3. Parts and Materials list

Designation Part nº Qty. Material


Volute Casing 102 1 A48 CL30
2)
Adapter 145 1 A48 CL30
Discharge Cover 163 1 A48 CL30
Impeller 230 1 A48 CL30
Flat Gasket 400.1 1 Hydraulic Gasket
Flat Gasket 400.2 1 Hydraulic Gasket
Flat Gasket 400.3 1 Hydraulic Gasket
Mechanical Seal 433 1 Steel / Carbon
Casing Wear Ring 502.1 1 A48 CL30
Shaft Protecting Sleeve 524 1 AISI 316
Washer 554 6 SAE 1020
1)
Flanged Motor 801 1 -
Hexagon Head Bolt 901.1 6 SAE 1020 / 5.6
Hexagon Head Bolt 901.2 4 SAE 1020 / 5.6
Threaded Plug 916 4 A197
Impeller Screw 906 1 SAE1045/8.8
Key 940 1 SAE 1045
Nameplate 970 1 AISI 304

Table 1

Notes:

1) Standard NEMA motors with JM / JP shaft end.

2) For KSB Megabloc with motors above 15 HP II poles only.

7
Megabloc

8. Dimensions chart
8.1. 2 pole motors / 60 Hz
II poles [inches]

7.5 4 1/2 17 6 15/16 1 15/16 8 11/16 1 7/8 5 1/2 7 1/2 7 1/16 4 3/8 7
10 3/8
32-200 2" 1 1/4" 7 1/16 6 5/16 3 1/8 5 1/4 20 3/16 8 7/8 2 3/16 9 3/4 2 7 8 1/2 8 1/16 5 5/16 7 3/4 7 1/2 1 15/16 9 7/16 1 3/8 9/16 5 5/16 4 15/16
15
20 6 1/4 26 1/16 10 2 9/16 12 1/8 2 11/16 8 1/4 10 1/2 9 3/4 6 1/8 9 1/2
15 5 1/4 20 3/16 8 7/8 2 3/16 9 3/4 2 7 8 1/2 3/8 8 1/16 5 5/16 7 3/4
32-250.1 20 10 8 1/4
2" 1 1/4" 8 7/8 7 1/16 3 15/16 6 1/4 26 1/16 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8 9 1/2 9 13/16 2 9/16 12 5/8 ###### 9/16 6 11/16 6 5/16
(1) 25 11 3/4 10
30 7 18 11/16 13 1/16 2 15/16 13 3/4 3 1/8 11 11 1/2 10 9/16 7 1/16 10
20 10 8 1/4
6 1/4 26 1/16 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8 9 1/2
32-250 25 11 3/4 10
2" 1 1/4" 8 7/8 7 1/16 3 15/16 9 13/16 2 9/16 12 5/8 ###### 9/16 6 13/16 6 3/8
(1) 30 7 18 11/16 2 15/16 13 3/4 3 1/8 11 11 1/2 10 9/16 7 1/16 10
13 1/16
40 8 28 1/8 3 3/8 15 11/16 3 1/4 10 1/2 12 1/2 11/16 11 5/8 7 13/16 10 1/2
5
4 1/2 17 6 15/16 1 15/16 8 11/16 1 7/8 5 1/2 7 1/2 7 1/16 4 3/8 7
40-125 7.5 2 1/2" 1 1/2" 5 1/2 4 7/16 3 1/8 3/8 6 5/16 1 15/16 8 1/4 1 3/8 9/16 4 5/16 3 11/16
10 5 1/4 20 3/16 8 7/8 2 3/16 9 3/4 2 7 8 1/2 8 1/16 5 5/16 7 3/4
10
40-160 2 1/2" 1 1/2" 6 5/16 5 3/16 3 1/8 5 1/4 20 3/16 8 7/8 2 3/16 9 3/4 2 7 8 1/2 3/8 8 1/16 5 5/16 7 3/4 7 1/2 1 15/16 9 7/16 1 3/8 9/16 5 4 7/16
15
20 10 8 1/4
6 1/4 26 1/16 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8 9 1/2
40-200 25 2 1/2" 1 1/2" 7 1/16 6 5/16 3 15/16 11 3/4 10 8 3/8 1 15/16 10 7/16 1 3/8 9/16 5 13/16 5 1/4
30 7 28 11/16 13 1/16 2 15/16 13 3/4 3 1/8 11 11 1/2 10 9/16 7 1/16 10
25 6 1/4 26 1/8 11 3/4 2 9/16 12 1/8 2 11/16 10 10 1/2 9 3/4 6 1/8 9 1/2
40-250 30 7 28 3/16 2 15/16 13 3/4 3 1/8 11 11 1/2 10 9/16 7 1/16 10
2 1/2" 1 1/2" 8 7/8 7 1/16 3 15/16 13 1/16 9 13/16 2 9/16 12 5/8 ###### 9/16 6 3/4 6 5/16
(1) 40 28 1/8 10 1/2
8 3 3/8 15 11/16 3 1/4 12 1/2 11/16 11 5/8 7 13/16 10 1/2
50 29 5/8 14 9/16 12
10
50-125 3" 2" 6 5/16 5 3/16 3 15/16 5 1/4 20 3/16 8 7/8 2 3/16 9 3/4 2 7 8 1/2 3/8 8 1/16 5 5/16 7 3/4 7 1/2 1 15/16 9 7/16 1 3/8 9/16 4 13/16 4 7/16
15
15 5 1/4 20 15/16 8 7/8 2 3/16 9 3/4 2 7 8 1/2 3/8 8 1/16 5 5/16 7 3/4
50-160 20 3" 2" 7 1/16 6 5/16 3 15/16 10 8 1/4 8 3/8 1 15/16 10 7/16 1 3/8 9/16 5 5/8 4 13/16
6 1/4 26 1/16 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8 9 1/2
25 11 3/4 10
25 6 1/4 26 1/8 11 3/4 2 9/16 12 1/8 2 11/16 10 10 1/2 9 3/4 6 1/8 9 1/2
50-200 30 3" 2" 7 7/8 6 5/16 3 15/16 7 28 3/16 2 15/16 13 3/4 3 1/8 11 11 1/2 10 9/16 7 1/16 10 8 3/8 1 15/16 10 7/16 1 3/8 9/16 6 5/16 5 9/16
13 1/16
40 8 28 1/8 3 3/8 15 11/16 3 1/4 10 1/2 12 1/2 11/16 11 5/8 7 13/16 10 1/2
15 5 1/4 22 7/8 8 7/8 2 3/16 9 3/4 2 7 8 1/2 3/8 8 1/16 5 5/16 7 3/4
65-125 4" 2 1/2" 7 1/16 6 5/16 3 15/16 8 3/8 2 9/16 11 ###### 9/16 5 11/16 4 1/4
20 6 1/4 26 1/16 10 2 9/16 12 1/8 2 11/16 8 1/4 10 1/2 9 3/4 6 1/8 9 1/2
20 10 8 1/4
6 1/4 26 1/8 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8 9 1/2
25 11 3/4 10
65-160 4" 2 1/2" 7 7/8 6 5/16 3 15/16 8 3/8 2 9/16 11 ###### 9/16 6 1/16 4 15/16
30 7 27 3/4 2 15/16 13 3/4 3 1/8 11 11 1/2 10 9/16 7 1/16 10
13 1/16
40 8 28 1/8 3 3/8 15 11/16 3 1/4 10 1/2 12 1/2 11/16 11 5/8 7 13/16 10 1/2
30 7 28 3/16 2 15/16 13 3/4 3 1/8 11 11 1/2 10 9/16 7 1/16 9 1/2
13 1/16
65-200 40 4" 2 1/2" 8 7/8 7 1/16 3 15/16 28 1/8 10 1/2 9 13/16 2 9/16 12 5/8 ###### 9/16 6 13/16 5 7/8
8 3 3/8 15 11/16 3 1/4 12 1/2 11/16 11 5/8 7 13/16 10 1/2
50 29 5/8 14 9/16 12

8
Megabloc

8.2. 4 pole motors / 60 Hz


IV poles [ inches ]

Pump Size Motor (HP) Connections Approximate dimensions

Suction Discharge
a1 b c h l m1 m2 n1 n2 q r1 s1 t1 t2 w r2 n3 n4 x s2 t4 t3
DN1 DN2
1 13 13/16 5 1/4 4
32-200.1 2" 1 1/4" 7 1/16 6 5/16 3 1/8 3 1/2 1 5/8 6 7/16 1 1/2 5 1/2 5/16 5 7/8 3 1/2 6 1/2 7 1/2 1 15/16 9 7/16 1 3/8 9/16 5 3/16 4 13/16
1.5 14 13/16 6 1/4 5
1.5
3 1/2 14 13/16 6 1/4 1 5/8 6 7/16 1 1/2 5 5 1/2 5/16 5 15/16 3 1/2 6 1/2
32-200 2 2" 1 1/4" 7 1/16 6 5/16 3 1/8 7 1/2 1 15/16 9 7/16 1 3/8 9/16 5 5/16 4 15/16
3 4 1/2 16 5 15/16 1 15/16 8 11/16 1 7/8 4 1/2 7 1/2 3/8 7 1/16 4 3/8 7
32-250.1(1) 3 2" 1 1/4" 8 7/8 7 1/16 3 15/16 4 1/2 16 5 15/16 1 15/16 8 11/16 1 7/8 4 1/2 7 1/2 3/8 7 1/16 4 3/8 7 9 13/16 2 9/16 12 5/8 1 7/8 9/16 6 11/16 6 5/16
3 16 5 15/16 4 1/2
32-250 (1) 2" 1 1/4" 8 7/8 7 1/16 3 15/16 4 1/2 1 15/16 8 11/16 1 7/8 7 1/2 3/8 7 1/16 4 3/8 7 9 13/16 2 9/16 12 5/8 1 7/8 9/16 6 13/16 6 3/8
5 17 6 15/16 5 1/2
1.5
40-160 2 1/2" 1 1/2" 6 5/16 5 3/16 3 1/8 3 1/2 14 13/16 6 1/4 1 5/8 6 7/16 1 1/2 5 5 1/2 5/16 5 15/16 3 1/2 6 1/2 7 1/2 1 15/16 9 7/16 1 3/8 9/16 5 4 7/16
2
2 3 1/2 6 1/4 1 5/8 6 7/16 1 1/2 5 5 1/2 5/16 5 15/16 3 1/2
14 13/16
40-200 3 2 1/2" 1 1/2" 7 1/16 6 5/16 3 15/16 5 15/16 4 1/2 6 1/2 8 3/8 1 15/16 10 7/16 1 3/8 9/16 5 13/16 5 4/16
4 1/2 1 15/16 8 11/16 1 7/8 7 1/2 3/8 7 1/16 4 3/8
5 15 13/16 6 15/16 5 1/2
3 16 5 15/16 4 1/2
4 1/2 1 15/16 8 11/16 1 7/8 7 1/2 7 1/16 4 3/8
40-250 (1) 5 2 1/2" 1 1/2" 8 7/8 7 1/16 3 15/16 17 6 15/16 3/8 7 9 13/16 2 9/16 12 5/8 1 7/8 9/16 6 3/4 6 5/16
5 1/2
7.5 5 1/4 17 15/16 7 3/8 2 3/16 9 3/4 2 8 1/2 8 1/16 5 5/16
1 13 13/16
50-125 3" 2" 6 5/16 5 3/16 3 15/16 3 1/2 5 1/4 1 5/8 6 7/16 1 1/2 4 5 1/2 5/16 5 7/8 3 1/2 6 1/2 7 1/2 1 15/16 9 7/16 1 3/8 9/16 4 13/16 4 7/16
1.5 14 13/16
3 16 5 15/16
50-160 3" 2" 7 1/16 6 5/16 3 15/16 4 1/2 1 15/16 8 11/16 1 7/8 4 1/2 7 1/2 3/8 7 1/16 4 3/8 7 8 3/8 1 15/16 10 7/16 1 3/8 9/16 5 5/8 4 13/16
5 17 6 15/16
5 4 1/2 17 6 15/16 1 15/16 8 11/16 1 7/8 7 1/2 7 1/16 4 3/8
50-200 3" 2" 7 7/8 6 5/16 3 15/16 5 1/2 3/8 7 8 3/8 1 15/16 10 7/16 1 3/8 9/16 6 5/16 5 9/16
7.5 5 1/4 17 15/16 7 3/8 2 3/16 9 3/4 2 8 1/2 8 1/16 5 5/16
5 17 5/16 6 15/16 1 15/16 8 11/16 1 7/8 7 1/2 7 1/16 4 3/8 7 1/4
5 1/2
50-250 (1) 7.5 3" 2" 9 7 1/16 4 15/16 5 1/4 18 11/16 7 3/8 3/8 9 13/16 2 9/16 12 5/8 1 7/8 9/16 7 1/16 6 7/16
2 3/16 9 3/4 2 8 1/2 8 1/16 5 5/16 7 3/4
10 20 3/16 8 7/8 7
10 5 1/4 20 3/16 8 7/8 2 3/16 9 3/4 2 7 8 1/2 3/8 8 1/16 5 5/16 7 3/4
50-315 (1) 15 3" 2" 11 8 7/8 4 15/16 23 3/8 10 8 1/4 8 1/2 11 2 9/16 13 9/16 1 7/8 9/16 8 5/16 7 11/16
6 1/4 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8
20 26 1/16 11 3/4 10 9 1/2
65-125 2 4" 2 1/2" 7 1/16 6 5/16 3 15/16 3 1/2 14 13/16 6 1/4 1 5/8 6 7/16 1 1/2 5 5 1/2 5/16 5 15/16 3 1/2 6 1/2 8 3/8 2 9/16 11 1 7/8 9/16 5 11/16 4 1/4
65-160 5 4" 2 1/2" 7 7/8 6 5/16 3 15/16 4 1/2 17 6 15/16 1 15/16 8 11/16 1 7/8 5 1/2 7 1/2 3/8 7 1/16 4 3/8 7 8 3/8 2 9/16 11 1 7/8 9/16 6 1/16 4 15/16
5 4 1/2 17 6 15/16 1 15/16 8 11/16 1 7/8 5 1/2 7 1/2 3/8 7 1/16 4 3/8 7
65-200 7.5 4" 2 1/2" 8 7/8 7 1/16 3 15/16 18 11/16 7 3/8 5 1/2 9 13/16 2 9/16 12 5/8 1 7/8 9/16 6 13/16 5 7/8
5 1/4 2 3/16 9 3/4 2 8 1/2 3/8 8 1/16 5 5/16 7 3/4
10 20 3/16 8 7/8 7
7.5 18 11/16 7 3/8 5 1/2
65-250 (1) 4" 2 1/2" 9 13/16 7 7/8 4 15/16 5 1/4 2 3/16 9 3/4 2 8 1/2 3/8 8 1/16 5 5/16 7 3/4 11 3 1/8 14 3/16 2 3/8 11/16 7 11/16 6 15/16
10 20 3/16 8 7/8 7
15 23 3/8 10 8 1/4 8 1/2
6 1/4 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8
20 26 1/16 11 3/4 10 9 1/2
65-315 4" 2 1/2" 11 8 7/8 4 15/16 12 3/8 3 1/8 15 3/4 2 3/8 11/16 8 13/16 8
25 27 3/16 11 9/16 9 1/2
7 2 15/16 13 3/4 3 1/8 11 1/2 10 9/16 7 1/16 10
30 28 11/16 13 1/16 11
5 4 1/2 17 6 15/16 1 15/16 8 11/16 1 7/8 7 1/2 7 1/16 4 3/8 7
80-160 5" 3" 8 7/8 7 1/16 4 15/16 5 1/2 3/8 9 13/16 2 9/16 12 5/8 1 7/8 9/16 6 5/8 5 1/4
7.5 5 1/4 18 11/16 7 1/4 2 3/16 9 3/4 2 8 1/2 8 1/16 5 5/16 7 3/4
7.5 19 1/16 7 1/4 5 1/2
5 1/4 2 3/16 9 3/4 2 8 1/2 3/8 8 1/16 5 5/16 8 1/8
80-200 10 5" 3" 9 13/16 7 1/16 4 15/16 20 1/2 8 3/4 7 11 2 9/16 13 9/16 1 7/8 9/16 7 3/16 6
15 6 1/4 23 3/4 10 2 9/16 12 1/8 2 11/16 8 1/2 10 1/2 9 3/4 6 1/8 8 7/8
15 23 3/8 10 8 1/2 8 1/2
80-250 (1) 5" 3" 11 8 7/8 4 15/16 6 1/4 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8 12 3/8 3 1/8 15 3/4 2 3/8 11/16 8 1/16 7 1/16
20 26 1/16 11 3/4 10 9 1/2
20 6 1/4 26 1/16 11 3/4 2 9/16 12 1/8 2 11/16 10 10 1/2 9 3/4 6 1/8 9 1/2
25 27 3/16 11 9/16 9 1/2
7 2 15/16 13 3/4 3 1/8 11 1/2 10 9/16 7 1/16 10
80-315 30 5" 3" 12 3/8 9 13/16 4 15/16 28 11/16 11 12 3/8 3 1/8 15 3/4 2 3/8 11/16 9 7/16 8 7/16
13 1/16
40 28 1/8 10 1/2
8 3 3/8 15 11/16 3 1/4 12 1/2 11/16 11 5/8 7 13/16 10 1/2
50 37 1/4 14 9/16 12
15 23 1/8 10 8 1/4 8 1/4
100-200 5" 4" 11 7 7/8 4 15/16 6 1/4 2 9/16 12 1/8 2 11/16 10 1/2 9 3/4 6 1/8 11 3 1/8 14 3/16 2 3/8 11/16 8 1/8 6 9/16
20 25 3/4 11 3/4 10 9 3/16
20 6 1/4 26 1/16 11 3/4 2 9/16 12 1/8 2 11/16 10 10 1/2 9 3/4 6 1/8 9 1/2
100-250 25 5" 4" 11 8 7/8 5 1/2 26 3/4 11 9/16 9 1/2 12 3/8 3 1/8 15 3/4 2 3/8 11/16 8 7/16 7 3/16
7 2 15/16 13 3/4 3 1/8 11 1/2 10 9/16 7 1/16 9 9/16
30 28 1/4 13 1/16 11
40 28 1/8 13 1/16 10 1/2
8 3 3/8 15 11/16 3 1/4 12 1/2 11/16 11 5/8 7 13/16 10 1/2
100-315 50 5" 4" 12 3/8 9 13/16 5 1/2 29 5/8 14 9/16 12 12 3/8 3 1/8 15 3/4 2 3/8 11/16 9 7/8 8 11/16
60 9 37 3/4 15 3/8 4 1/8 17 3/16 3 1/8 11 1/4 14 3/4 16 1/2 9 1/2 10 13/16
20 6 1/4 25 5/8 11 3/4 2 9/16 12 1/8 2 11/16 10 10 1/2 9 3/4 6 1/8 9 1/16
125-200 25 6" 5" 12 3/8 9 13/16 5 1/2 29 5/8 11 9/16 9 1/2 12 3/8 3 1/8 15 3/4 2 3/8 11/16 9 1/8 7 5/16
7 2 15/16 13 3/4 3 1/8 11 1/2 10 9/16 7 1/16 12 7/16
30 31 1/8 13 1/16 11
25 27 5/8 11 9/16 9 1/2
7 2 15/16 13 3/4 3 1/8 11 1/2 10 9/16 7 1/16
125-250 30 6" 5" 13 3/16 9 13/16 5 1/2 29 3/16 13 1/16 11 10 1/2 12 3/8 3 1/8 15 3/4 2 3/8 11/16 11 7/16 8 3/4
40 8 28 1/8 13 1/16 3 3/8 15 11/16 3 1/4 10 1/2 12 1/2 11/16 11 5/8 7 13/16
20 6 1/4 25 5/8 11 3/4 2 9/16 12 1/8 2 11/16 10 10 1/2 9 3/4 6 1/8 9 1/16
150-200 25 8" 6" 15 3/4 11 6 5/16 29 5/8 11 9/16 9 1/2 17 11/16 3 15/16 21 5/8 2 15/16 7/8 12 3/16 9 3/16
7 2 15/16 13 3/4 3 1/8 11 1/2 10 9/16 7 1/16 12 7/16
30 31 1/8 13 1/16 11
40 27 11/16 13 1/16 10 1/2
8 3 3/8 15 11/16 3 1/4 12 1/2 11/16 11 5/8 7 13/16 10 1/16
150-250 50 8" 6" 14 3/4 11 6 5/16 29 3/16 14 9/16 12 15 3/4 3 15/16 19 11/16 2 15/16 7/8 11 9/16 8 3/4
60 9 37 1/2 15 3/8 4 1/8 17 3/16 3 1/8 11 1/4 14 3/4 16 1/2 9 1/2 10 5/8

Notes:
Suction and discharge connections are according to ANSI B16.1 125 # FF. The pump sizes marked (1) are according to ANSI
B16.1 250 # FF.
Guiding values change according to the motor manufacturer’s instruction.
Dimensions alteration without tolerance according to DIN EN 735.

9
Megabloc

9. Megabloc quick selection - 2 pole motors - 60 Hz - 3500 rpm


Altur (ft)
Vazão Head 49 66 82 98 115 131 148 164 180 197 213
3
Flow
(m /h) (m) 15 20 25 30 35 40 45 50 55 60 65
(GPM) (m3/h)
25-150 25-150 25-150 25-150 25-150 25-150 25-200 25-200 25-200 25-200 25-200
18 4
1 3.82 1 3.98 2 4.45 2 4.88 3 5.12 3 5.55 5 6.26 5 6.50 5 6.50 7.5 7.05 7.5 7.24
25-150 25-150 25-150 25-150 25-150 25-150 25-200 25-200 25-200 25-200 25-200
26 6
1 3.82 1.5 4.13 2 4.57 2 4.88 3 5.20 3 5.55 5 6.26 7.5 6.54 7.5 6.81 7.5 7.13 10 7.28
25-150 25-150 25-150 25-150 25-150 25-200 25-200 25-200 25-200 25-200 25-200
35 8
1 3.98 1.5 4.37 2 4.65 3 5.04 3 5.28 5 6.02 5 6.34 7.5 6.61 7.5 6.93 7.5 7.17 10 7.32
32-125.1 32-125.1 25-150 25-150 25-150 32-160.1 25-200 32-160.1 25-200 25-200 25-200
44 10
1.5 4.3/3.5 2 4.37 2 4.88 3 5.16 3 5.55 5 5.79 5 6.42 7.5 6.42 7.5 7.05 7.5 7.20 10 7.40
32-125.1 32-125.1 32-125.1 25-150 32-125.1 32-160.1 32-160.1 32-160.1 32-160.1 25-200 32-200.1
53 12
1.5 4.3/3.7 2 4.41 3 4.88 3 5.24 5 5.51 5 5.87 5 6.22 7.5 6.46 7.5 6.73 10 7.28 10 7.48
32-125.1 32-125.1 32-125.1 32-125.1 32-125.1 32-160.1 32-160.1 32-160.1 32-160.1 32-200.1 32-200.1
62 14
2 4.3/3.9 3 4.49 3 4.92 3 5.28 5 5.55 5 5.91 7.5 6.26 7.5 6.50 7.5 6.77 10 7.36 10 7.56
32-125.1 32-125.1 32-125.1 32-125.1 32-125.1 32-160.1 32-160.1 32-160.1 32-160.1 32-200.1 32-200.1
70 16
2 4.3/4.0 3 4.53 3 4.96 5 5.31 5 5.63 7.5 5.94 7.5 6.30 7.5 6.54 7.5 6.81 10 7.44 10 7.60
32-125.1 32-125.1 32-125.1 32-125.1 32-125.1 32-160.1 32-160.1 32-160.1 32-160.1 32-200.1 32-200
79 18
2 4.33 3 4.65 3 5.04 5 5.35 5 5.67 7.5 6.02 7.5 6.30 7.5 6.61 7.5 6.85 10 7.52 15 7.40
32-125.1 32-125.1 32-125.1 32-125 32-160.1 32-160.1 32-160.1 32-200 32-200 32-200
88 20
3 4.76 5 5.16 5 5.47 5 5.31 7.5 6.14 7.5 6.38 7.5 6.65 10 7.01 15 7.20 15 7.40
32-125 32-125 32-125 32-125 32-160.1 32-160.1 32-160 32-200 32-200 32-200
97 22
5 4.33 5 4.76 5 5.08 5 5.35 7.5 6.22 7.5 6.50 10 6.81 10 7.01 15 7.20 15 7.44
32-125 32-125 32-125 32-125 32-160.1 32-160.1 32-160 32-200 32-200 32-200
106 24
5 4.37 5 4.76 5 5.12 7.5 5.39 7.5 6.30 7.5 6.54 10 6.89 15 7.09 15 7.24 15 7.44
32-125 32-125 32-125 32-125 32-160 32-160 32-200 32-200 32-200 32-200
114 26
5 4.45 5 4.80 5 5.16 7.5 5.39 7.5 6.42 10 6.69 15 7.01 15 7.13 15 7.32 15 7.52
32-125 32-125 32-125 32-125 32-160 32-160 32-200 32-200 32-200 32-200
123 28
5 4.53 5 4.88 7.5 5.20 7.5 5.47 10 6.50 10 6.77 15 7.01 15 7.20 15 7.40 15 7.56
32-125 32-125 32-125 32-160 32-160 32-160 32-200 32-200 32-200 32-200
132 30
5 4.61 5 4.92 7.5 5.24 7.5 6.30 10 6.61 10 6.93 15 7.09 15 7.32 15 7.44 15 7.64
40-125 40-125 40-125 40-125 40-160 40-160 40-160 40-160 40-160 40-200
154 35
5 4.37 5 4.72 7.5 5.04 10 5.39 10 5.79 10 5.98 15 6.30 15 6.50 15 6.73 20 7.40
40-125 40-125 40-125 40-125 40-160 40-160 40-160 40-160 40-160 40-200
176 40
5 4.45 5 4.76 7.5 5.12 10 5.43 10 5.79 15 6.06 15 6.38 15 6.54 15 6.77 20 7.48
40-125 40-125 40-125 40-160 40-160 40-160 40-160 40-160 40-200 40-200
198 45
7.5 4.53 7.5 4.84 10 5.16 10 5.51 15 5.87 15 6.18 15 6.42 15 6.61 20 7.40 20 7.60
40-125 40-125 40-125 40-160 40-160 40-160 40-160 40-200 40-200 40-200
220 50
7.5 4.65 7.5 4.92 10 5.24 15 5.67 15 5.94 15 6.26 15 6.46 20 7.32 20 7.48 25 7.68
50-125 50-125 40-160 40-160 40-160 40-160 50-160 50-160 50-160 50-200
264 60
10 4.53 10 4.88 15 5.51 15 5.87 15 6.14 15 6.42 20 6.30 20 6.57 20 6.85 25 7.52
50-125 50-125 50-125 50-125 50-160 50-160 50-160 50-160 50-200 50-200
308 70
10 4.61 10 4.96 15 5.28 15 5.59 20 5.91 20 6.14 20 6.42 20 6.69 25 7.36 25 7.56
50-125 50-125 50-125 50-160 50-160 50-160 50-160 50-160 50-200 50-200
352 80
10 4.72 15 5.04 15 5.35 15 5.75 20 6.02 20 6.30 25 6.50 25 6.77 30 7.52 30 7.64
50-125 50-125 50-125 65-125 50-160 50-160 50-160 65-160 65-200 65-200
396 90
10 4.80 15 5.12 15 5.47 20 5.55 20 6.14 20 6.42 25 6.65 30 6.65 30 7.17 40 7.36
65-125 65-125 50-125 65-125 50-160 50-160 50-160 65-160 65-200 65-200
440 100
15 4.72 15 5.08 15 5.51 20 5.55 20 6.30 15 6.54 25 6.77 30 6.69 40 7.20 40 7.40
65-125 65-125 65-125 65-160 65-160 65-160 65-160 65-160 65-200 65-200
484 110
15 4.76 15 5.12 20 5.39 20 5.8/5.7 25 6.06 25 6.38 30 6.61 40 6.73 40 7.28 40 7.48
65-125 65-125 65-125 65-160 65-160 65-160 65-160 65-160 65-200 65-200
528 120
15 4.80 15 5.16 20 5.43 25 5.9/5.8 25 6.18 30 6.42 30 6.65 40 6.77 40 7.36 40 7.56
65-125 65-125 65-125 65-160 65-160 65-160 65-200 65-200
572 130
15 4.92 20 5.20 20 5.47 25 6.26 30 6.54 40 6.65 40 7.48 50 7.68
65-125 65-125 65-125 65-160 65-160 65-160 65-200
616 140
15 5.04 20 5.28 20 5.51 30 6.38 40 6.61 40 6.73 50 7.80
65-125 65-125 65-160
660 150
20 5.39 20 5.55 40 6.65

A A - Pump Size
B - Motor Power (HP)
B C C - Nominal Impeller Diameter (inch)

10
Megabloc

Megabloc quick selection - 2 pole motors - 60 Hz - 3500 rpm

Altur (ft)
Vazão Head 230 246 262 279 295 312 328 361 394 427
3
Flow
(m /h) (m) 70 75 80 85 90 95 100 110 120 130
(GPM) (m3/h)
25-200 25-200 25-200 25-200 25-200
18 4
7.5 7.48 10 7.68 10 7.80 10 7.95 10 8.07
25-200 25-200 25-200 25-200 25-200
26 6
10 7.44 10 7.68 10 7.83 10 7.95 10 8.07
25-200 25-200 25-200 32-200 25-200 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1
35 8
10 7.56 10 7.72 10 7.83 15 8.15 10 8.15 15 8.70 20 8.90 20 9.25 20 9.57 25 10.0
25-200 25-200 32-200.1 32-200 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1
44 10
10 7.68 10 7.80 10 7.99 15 8.15 15 8.50 20 8.74 20 8.94 20 9.25 20 9.61 25 10.0
25-200 32-200.1 32-200 32-200 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1
53 12
10 7.68 10 7.80 15 7.99 15 8.15 15 8.62 20 8.78 20 8.98 20 9.29 20 9.65 25 10.04
32-200.1 32-200 32-200 32-200 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1
62 14
10 7.72 15 7.76 15 7.99 15 8.15 20 8.66 20 8.82 20 9.02 20 9.33 25 9.72 25 10.08
32-200 32-200 32-200 32-200 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1
70 16
15 7.56 15 7.76 15 7.99 15 8.19 20 8.74 20 8.94 20 9.06 25 9.37 25 9.76 25 10.16
32-200 32-200 32-200 32-200 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1
79 18
15 7.56 15 7.80 15 8.03 15 8.23 20 8.82 20 9.02 25 9.13 25 9.49 25 9.84 30 10.24
32-200 32-200 32-200 32-200 32-250.1 32-250.1 32-250.1 32-250.1 32-250.1 32-250
88 20
15 7.56 15 7.91 15 8.07 15 8.23 20 8.94 25 9.09 25 9.25 25 9.57 30 9.96 30 10.04
32-200 32-200 32-200 32-200 32-250 32-250 32-250 32-250 32-250 32-250
97 22
15 7.64 15 7.91 15 8.07 15 8.23 20 8.66 20 8.86 25 9.06 25 9.37 30 9.72 40 10.12
32-200 32-200 32-200 32-200 32-250 32-250 32-250 32-250 32-250 32-250
106 24
15 7.72 15 7.91 15 8.07 20 8.23 20 8.70 25 8.90 25 9.06 25 9.37 30 9.80 40 10.12
32-200 32-200 32-200 40-200 32-250 32-250 32-250 32-250 32-250 32-250
114 26
15 7.72 15 7.95 20 8.11 20 8.15 25 8.74 25 8.94 25 9.09 30 9.49 30 9.80 40 10.20
32-200 32-200 32-200 40-200 32-250 32-250 32-250 32-250 32-250 32-250
123 28
15 7.80 20 8.03 20 8.15 20 8.15 25 8.82 25 9.06 25 9.17 30 9.53 30 9.88 40 10.24
32-200 32-200 32-200 40-200 32-250 32-250 32-250 32-250 32-250 40-250
132 30
20 7.83 20 8.07 20 8.15 20 8.15 25 8.94 25 9.09 25 9.25 30 9.61 40 9.92 40 10.24
32-200 32-200 40-200 40-200 40-250 40-250 40-250 40-250 40-250 40-250
154 35
20 8.07 20 8.15 25 7.95 20 8.15 25 8.78 30 8.98 30 9.25 40 9.61 40 9.96 40 10.24
40-200 40-200 40-200 40-200 40-250 40-250 40-250 40-250 40-250
176 40
20 7.68 20 7.76 25 7.99 25 8.23 30 8.94 30 9.17 40 9.37 40 9.69 40 10.0
40-200 40-200 40-200 50-200 40-250 40-250 40-250 40-250 40-250
198 45
25 7.72 25 7.87 25 8.07 30 8.27 30 9.02 40 9.25 40 9.45 40 9.84 50 10.08
40-200 40-200 40-200 50-200 40-250 40-250 40-250 40-250 40-250
220 50
25 7.80 25 7.99 25 8.15 30 8.31 40 9.21 40 9.41 40 9.61 40 9.92 50 10.20
50-200 50-200 50-200 50-200 40-250 40-250 40-250 40-250
264 60
25 7.64 30 7.87 30 8.19 40 8.39 40 9.53 40 9.65 50 9.88 50 10.0
50-200 50-200 50-200 50-200 50-200
308 70
30 7.68 40 8.03 40 8.27 40 8.46 40 8.62
50-200 50-200 50-200 50-200
352 80
30 7.87 40 8.15 40 8.31 40 8.54
65-200 50-200 50-200
396 90
40 7.60 40 8.27 40 8.46
65-200 50-200
440 100
40 7.64 40 8.39
65-200 65-200
484 110
40 7.68 50 7.87
65-200 65-200
528 120
50 7.80 50 7.99
65-200
572 130 Trimmed form of the Impeller size 32.125-1 Trimmed Form of the Impeller when
50 7.87 when indicated 2 diameters. (Trimm paralel up indicated 2 diameters for Pump of IV Poles
65-200 to diam. 115, under diam. 115, trimm and for size 65-160 of II Poles.
616 140 according to the fig.)
50 7.95
660 150

A A - Pump Size
B - Motor Power (HP)
B C C - Nominal Impeller diameter (inch)

11
Megabloc

9.1 Megabloc quick selection - 4 pole motors - 60 Hz - 1750 rpm


VazãoHeadAlt (ft) 16 33 49 66 82 98 115 131 148 164
3
(m
Flow/h) (m) 5 10 15 20 25 30 35 40 45 50
3
(GPM) (m /h)
32-200.1 32-200.1 32-250 32-250
22 5 1 7.01 1.5 7.99 3 8.90 3 9.61
32-200 32-200 32-250 32-250
44 10 1.5 7.17 2 7.99 3 9.06 3 9.65
40-160 32-200 32-200 32-250 32-250
66 15 1.5 5.71 2 7.44 3 8.15 5 9.37 5 9.96
40-160 40-160 40-200 40-250 40-250 50-315 50-315 50-315 50-315
88 20 1.5 5.83 2 6.85 3 8.07 5 9.25 5 10.0 10 10.63 10 11.30 10 11.89 10 12.36
50-125 40-160 40-200 40-200 40-250 40-250 50-315 50-315 50-315 50-315
110 25 1 4.49 2 5.94 3 7.48 5 8.19 5 9.49 7.5 10.12 10 10.63 10 11.34 10 11.89 15 12.40
50-125 40-160 50-200 50-200 40-250 50-250 50-315 50-315 50-315 50-315
132 30 1 4.53 2 6.18 5 7.17 5 8.15 7.5 9.76 7.5 9.72 10 10.63 10 11.42 15 11.93 15 12.44
50-125 50-160 50-200 50-200 50-250 50-250 50-315 50-315 50-315 50-315
154 35 1.5 4.61 3 6.14 5 7.28 5 8.23 7.5 9.17 7.5 9.84 10 10.71 15 11.46 15 12.01 15 12.44
50-125 50-160 50-200 50-200 50-250 50-250 50-315 50-315 50-315 50-315
176 40 1.5 4.72 3 6.26 5 7.52 5 8.35 7.5 9.33 10 9.96 10 10.87 15 11.54 15 12.05 15 12.52
65-125 50-160 65-200 65-200 50-250 50-250 50-315 50-315 50-315 50-315
198 45 2 4.65 5 6.50 5 7.20 7.5 8.07 10 9.45 10 10.16 15 11.22 15 11.77 15 12.20 25 12.52
65-125 50-160 65-200 65-200 65-250 65-250 50-315 50-315 50-315 65-315
220 50 2 4.69 5 6.50 5 7.20 7.5 8.07 10 9.45 10 10.16 15 11.22 15 11.77 15 12.20 25 12.52
65-125 50-160 65-200 65-200 65-250 65-250 65-315 50-315 50-315 65-315
242 55 2 4.69 5 6.61 5 7.28 7.5 8.11 10 9.53 15 10.24 15 10.91 15 11.93 20 12.36 25 12.60
65-125 65-160 65-200 65-200 65-250 65-250 65-315 65-315 65-315 65-315
264 60 2 4.72 5 6.26/5.94 5 7.40 7.5 8.19 10 9.61 15 10.24 15 10.98 20 11.57 20 12.13 25 12.60
65-125 65-160 65-200 65-200 65-250 80-250 65-315 65-315 65-315 65-315
286 65 2 4.88 5 6.34/6.14 7.5 7.52 7.5 8.23 10 9.69 15 9.96 15 11.02 20 11.69 25 12.13 25 12.60
65-125 65-160 80-200 65-200 65-250 80-250 65-315 65-315 65-315 80-315
308 70 2 4.96 5 6.46/6.22 7.5 7.05 7.5 8.31 15 9.80 15 10.0 20 11.10 20 11.69 25 12.17 30 12.24
65-160 80-200 65-200 65-250 80-250 65-315 65-315 65-315 80-315
330 75 5 6.50/6.42 7.5 7.13 10 8.43 15 9.92 15 10.04 20 11.18 25 11.77 25 12.24 30 12.24
80-160 80-200 80-200 65-250 80-250 65-315 65-315 65-315 80-315
352 80 5 6.38/5.47 7.5 7.20 10 8.03 15 10.0 15 10.12 20 11.26 25 11.85 25 12.28 30 12.28
80-160 80-200 80-200 80-250 80-250 65-315 65-315 65-315 80-315
374 85 5 6.38/5.47 7.5 7.24 10 8.11 15 9.37 15 10.12 20 11.34 25 11.89 25 12.36 30 12.28
80-160 80-200 80-200 80-250 80-250 65-315 65-315 65-315 80-315
396 90 5 6.46/5.55 7.5 7.28 10 8.15 15 9.41 20 10.20 25 11.50 25 11.97 30 12.44 30 12.32
80-160 80-200 80-200 80-250 80-250 65-315 65-315 65-315 80-315
418 95 7.5 6.50/5.63 7.5 7.36 10 8.19 15 9.45 20 10.31 25 11.57 30 12.05 30 12.44 30 12.36
80-160 80-200 80-200 80-250 80-250 80-315 80-315 80-315 80-315
440 100 7.5 6.50/5.51 10 7.44 15 8.23 15 9.53 20 10.35 25 10.67 30 11.30 30 11.85 30 12.40
80-160 80-200 80-200 80-250 80-250 80-315 80-315 80-315 80-315
484 110 7.5 6.53/5.87 10 7.56 15 8.31 20 9.65 20 10.47 25 10.79 30 11.38 30 11.93 40 12.44
80-160 100-200 80-200 100-250 80-315 80-315 80-315 80-315 80-315
528 120 7.5 6.61/6.02 15 7.28 15 8.46 20 9.41 20 10.20 30 10.87 30 11.54 40 12.01 40 12.52
80-160 100-200 80-200 100-250 80-315 80-315 80-315 80-315 80-315
572 130 7.5 6.65/6.22 15 7.44 15 8.62 20 9.49 25 10.39 30 11.06 30 11.61 40 12.13 40 12.64
100-200 100-200 100-250 80-315 80-315 80-315 80-315 80-315
616 140 15 7.48 15 8.35 20 9.57 30 10.51 30 11.14 40 11.73 40 12.24 40 12.72
100-200 100-200 100-250 80-315 80-315 80-315 80-315 80-315
660 150 15 7.56 20 8.43 20 9.65 30 10.59 30 11.30 40 11.85 40 12.36 50 12.83
100-200 100-200 100-250 100-250 80-315 80-315 80-315 80-315
704 160 15 7.64 20 8.50 25 9.72 25 10.28 30 11.42 40 12.01 40 12.52 50 12.91
100-200 100-200 100-250 100-250 100-315 80-315 80-315 80-315
749 170 15 7.76 20 8.62 25 9.80 25 10.35 40 11.02 40 12.13 40 12.60 50 12.99
125-200 125-200 100-250 100-250 100-315 100-315 100-315 80-315
793 180 20 8.39/6.42 20 8.58/8.11 25 9.92 30 10.43 40 11.02 40 11.65 50 12.24 50 12.99
125-200 125-200 100-250 100-315 100-315 100-315 100-315
837 190 20 8.39/6.50 25 8.58/8.19 25 10.08 40 11.10 40 11.77 50 12.32 60 12.80
125-200 125-200 100-250 100-315 100-315 100-315 100-315
881 200 20 8.39/6.65 25 8.58/8.23 25 10.12 40 11.22 50 11.93 50 12.44 60 12.95
125-200 125-200 100-315 100-315 100-315 100-315
925 210 20 8.39/6.81 25 8.58/8.35 40 11.30 50 11.93 50 12.52 60 12.91
125-200 125-200 100-315 100-315 100-315 100-315
969 220 20 8.39/6.89 25 8.58/8.46 40 11.42 50 12.05 50 12.60 60 12.99
125-200 125-200
1057 240 20 8.58/6.93 25 8.94
125-200 125-200 125-250
1145 260 20 8.58/7.01 30 9.06 40 9.80
125-200 125-250 125-250
1233 280 20 8.58/7.24 30 9.17 40 9.92
150-200 125-200 125-250 125-250
1321 300 20 8.58/6.02 25 8.58/7.56 30 9.33 40 10.0
150-200 125-200 125-250 125-250
1409 320 20 8.58/6.06 25 8.58/7.87 30 9.41 40 10.16
150-200 150-200 150-250 125-250
1497 340 20 8.58/6.50 30 8.58/8.35 40 8.90 40 10.24
150-200 150-200 150-250 150-250 Trimmed form of the Impeller size
1585 360 20 8.58/6.81 30 8.58/8.43 40 8.98 50 9.84 32.125-1 when indicated 2 diameters. Trimmed Form of the Impeller when
150-200 150-200 150-250 150-250 (Trimm paralel up to diam. 115, under indicated 2 diameters for Pump of
1673 380 20 8.58/7.01 30 8.58 40 9.09 50 9.92 diam. 115, trimm according to the IV Poles and for size 65-160 of II
150-200 150-250 150-250 fig.) Poles.
1761 400 25 8.58/7.40 40 9.17 60 9.96
150-200 150-250 150-250 150-250
1981 450 25 8.58/7.95 40 8.66 50 9.37 60 10.08
150-250 150-250 150-250
2202 500 40 8.94 50 9.65 60 10.28
A - Pump Size
A B - Motor Power (HP)
B C C - Nominal Impeller diameter (inches)

12
Megabloc

10. Characteristics curves


Please refer to the Performance Curves Booklet.

Note: KSB reserves the right to alter the information presented in this manual without prior notice.

13
Megabloc

11.09.2007
A2744.0.1E/1

KSB Bombas Hidráulicas SA


Rua José Rabello Portella, 400
Várzea Paulista SP 13220-540
Brazil http://www.ksb.com
phone.: 55 11 4596 8500 Fax: 55 11 4596 8580
SAK – KSB Customer Service
e-mail: gqualidade@ksb.com.br
Fax: 55 11 4596 8656
14

You might also like