Professional Documents
Culture Documents
9. The high frequency vibrations are in the range of_____CPM and above.
a-1000 b-3000 c-2000 d-500
11. which procedure is used to check that all blades are travelling within the same tip path plane?
a-rolling b-tracking c-both d-none
12. If a blade is out of track, the helicopter will have a_____ vertical vibration.
a-1:2 b-1:3 c-1:4 d-1:1
14. the ground track is most often adjusted by changing the angle of attack of the individual blade
through the_____.
a-pitch change rod b-connecting rod c-none
16. Incase of track check of 3 bladed tail rotor , where the reflective tape is placed
1. At 65 degree angle 2. At 45 degree angle 3. At 90 degree angle
4. None
18. Blades equipped with BIS inspection system , flashing red light indicates
1. satisfactory condition 2. Blade crack 3. Tracking required 4. None
19. Blades equipped with BIS inspection system , steady red light indicates
1. satisfactory condition 2. Blade crack 3. Tracking required 4. None
20. Blades equipped with BIM inspection system , yellow or white color indiactes
1. Normal pressure 2. High pressure 3. Low peressure 4. None
21. Blades equipped with BIM inspection system , Red or black color indiactes
1. Normal pressure 2. High pressure 3. Low peressure 4. None
26. Phosphate ester base hydraulic fluid is very susceptible to contamination from
A- Teflon seal material.
B- Water in the atmosphere.
C- Ethylene- propylene elastomers.
Subjectives