You are on page 1of 1

LAB TEST REQUEST

Job No. MFJO709 Date: 29.03.2018

PIPES (for 3.2 certification check test)

Sr. # Material Size Heat No. Manufacturer Size of Test Pcs Qty.

1 SA 106 Gr B Pipe 1/2" Sch 80 1160132 INTERPIPE 300 mm Length 1 No.

2 SA 106 Gr B Pipe 6" Sch 80 1632163V HENGYANG STEEL 300 mm Length 1 No.

3 SA 106 Gr B Pipe 3" Sch 160 117388 TUBOS 300 mm Length 1 No.

Required Test for Each Test Coupon:

A) Chemical Analysis shall be carried out and acceptance criteria will be as SA 106 Gr B & SA 530
along with below restriction.

Sr No Elements Maximum (%)

1 Carbon (C) 0.23

2 Mn 1.30

Carbon Equivalent (CE)


3 0.43
(Note a, b)

B) Tensile test shall be carried out as per requirement of SA 106 Gr B & SA 530

Additionally bend test shall be performed for pipe 2” & below


Flattening test shall be performed for pipe above 2”
C) Hardness Test shall be carried for 248 HV 10 max. And it shall be recorded in “HV 10” unit.
D) Macro test to confirm whether material is fully killed and normalized.

You might also like