You are on page 1of 2

5/25/2018 Instrument HOOK- UP drawing basics - Industrial Automation - Industrial Automation, PLC Programming, scada & Pid Control

Pid Control System

Home Blog Quiz

Instrument HOOK- UP drawing basics


May 23

sivaranjith  1d

What is hook-up drawing?


Hook up drawing provides a detailed description of the installation of the instruments in the correct way, from the tapping
1/1
point in the process line up to the sensing instrument.
May 24
The Hook-up drawing indicates the slopes of the tube, the position of the instrument in reference to the point of tapping of the
process, the breakage of the reach between the instrument and the pipe. It also provides information on the requirement of
bulk material for each installation.

There are two types of hook-up drawing:

Process Hook-up: which contains the installation of the instrument for process control.

Pneumatic Hook-up: This hook-up drawing contains typical installations for instruments that require air for instruments, such
as the control valve. 1d ago

Difference between Hook-up and P&ID drawing:


Piping and Instrumentation Diagram (P&ID) shows the instruments that are to be connected to a process line, the
Instrument Hook-up gives detail information about how that is to be done during actual installation.

Requirements for a Hook-up drawing:


Contract Requirement and Project Design Criteria
Piping and Instrument Diagrams (P&ID )
Instrument List (with Instrument Datasheet)
Piping Material Classification (PMC) or Piping Material Specification (PMS)
Instrument Rack grouping, elevation of tapping and rack
Control Valve List (for Instrument Air)
Tank and Heat Exchanger GA drawings

Example for a Hook-up drawing:

×
Process Hook-up:

https://automationforum.in/t/instrument-hook-up-drawing-basics/3678 1/2
5/25/2018 Instrument HOOK- UP drawing basics - Industrial Automation - Industrial Automation, PLC Programming, scada & Pid Control System

May 23

1/1
May 24

Hook- up for pressure transmitter:

1d ago

image.jpg · 1186×841 186 KB ·  download 2 of 3

Hook up drawings:  Hook Up Library.pdf (1.7 MB)

https://automationforum.in/t/instrument-hook-up-drawing-basics/3678 2/2

You might also like