www.Inspection-for-Industry.

com
ITP No.:
INSPECTION GR.
FIELD INSPECTION REPORT REPORT NO.
Quality Control Form DATE

INSPECTION TYPE WORK No.

ITEM No.
INSTALLATION OF
CABLE TRAY/ CONDUIT/ TRUNKING LOCATION
SIGNATURE
INSPECTION NOTICE NO.: COMPANY CONTRACTOR SUBCONTRACTOR
COMPANY’S INSPECTOR: / / / / / /
CONTRACTOR INSPECTOR:
SUBCONTRACTOR INSPECTOR
INSPECTION RESULTS WITNESSED
APPROVED WITH COMMENT CONTRACTOR

RE-INSPECTION REQUIRED
NOT APPROVED
FOR INFORMATION ONLY

CHECKLIST FOR CABLE TRAY CHECK LIST FOR CONDUIT

Cable tray / size. Support and spacing as per specification and drawings.
Cable tray / routing. Support adjustment to terminal fittings.
Conduit clean, Stub-ups protected. Open ends plugged not
Cable tray, sharp edge, burr etc.
damaged during construction period.
Field bend radius correctper specification and code. Bends free
Tightening bolts & nuts.
of deformities.
Support type / size / welding / anchoring. Expansion joints as shown on drawings.
Support type / size / welding / anchoring. Installation neat and evently spaced.
Spacing between instrument and power conduit as per
Touch up paint (if applicable)
specification.
Cable tray cover installation. ?????????????
Earthing bonding between tray. Conduit permanently and effectively grounded.
Proper fitting installed with threads fully engaged, proper sealing
Grounding Installed and Connected. compound used, no wrench cuts, conduit ends have bushing and
cover installed.
No obstruction to pulling cable. Seal and drains installed per drawings.
Aluminum, PVC or PVC coated conduits installed where
All coversm Fire stopper and partion installed.
specified on drawings.
All braces and supports adequate to handle weight of tray and Flexible conduit with proper bending radius and whit standard
cable. fittings.
Metal junction boxes leveled and supported per drawings with
proper hubs, locknuts and bushing installed.
Seal poured.
REMARKS: Installation of main cable tray only as per attached cable tray layout drawing.

Legend NA: Not Applicable