Professional Documents
Culture Documents
Revision List
Printed initials in the approval boxes confirm that the document has been signed.
The Originals are held by Document Controller.
Page 1 of 11
LIST of RULES / CODES and STANDARDS
FPSO-Block 12W Development Project
Title: Document No Rev.
LIST of RULES / CODES and STANDARDS 815-00-LST-J-0094 B1
Section Change
Revision List
Printed initials in the approval boxes confirm that the document has been signed.
The Originals are held by Document Controller.
LIST of RULES / CODES and STANDARDS
FPSO-Block 12W Development Project
SECTION 1.8
List of Rules / Codes and Standards
Regulatory bodies
IALA International Association of Marine Aids to Navigation and Lighthouse Authorities
IMO Convention on the international Regulations for Preventing Collisions at sea, (COLREGS) 1972
(applicable to first tow only)
IMO International Convention for the prevention of Pollution from Ships (MARPOL 73/78) incl.
amendments and MEPC/Cir. 406
SOLAS International Convention for Safety of Life at Sea (SOLAS) 1974 incl. Amendments
ITC International Telecommunications Convention, 1973 and revisions
MODU Code for the Construction and Equipment of Mobile Offshore Drilling Units, 1989
Lloyds Rules and Regulations for the Classification of a Floating Offshore Installation at a Fixed Location –
May 1999.
API RP 2SK Recommended Practice for Design and Analysis of Sea-keeping Systems for Floating Structures.
ISO 19901-7, Part 7: Station-keeping systems for floating offshore structures and mobile offshore units, ISO 19901-
7:2005(E)
SOLAS – Part 1 Ch.II-1, Part B Subdivision and Stability.
MARPOL 73/78 Annex I, Ch. 4, Part A Subdivision and Stability.
Regulation 27 (Intact Stability) and Regulation
28
Industry Guidelines, Codes and Standards
SOLAS International Convention for Safety of Life at Sea (SOLAS 1974) incl. amendments
Classification Society Rules
ABS Guide for Building and Classing Floating Production Installations – April 2004.
ABS Rules for Building and Classing Single Point Moorings – 1996
ABS Guide for Certification of Offshore Mooring Chain – 1999
ABS ABS Guide for Building and Classing Floating Production Installations
ABS ABS Guide for Building and Classing Facilities on Offshore Installations
Corrosion Protection
ASTM D3182-89 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard
Compounds and Preparing Standard Vulcanized sheets
ASTM D3183-02 Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products
ISO 8501-1 British Standard Preparation of steel substrates before application of paint and related products
ISO 10474 / EN 10204 Steel and Steel Productions – Inspection Documentations
DNV RP B401 Cathodic Protection Design
SIS Pictorial Surface Preparation Standard on Painting Steel Surfaces (05-5900)
SSPC Preparation Manuals and Specification
Cranes
API 2C Specification for Offshore Cranes
API 2D Operation and Maintenance of Offshore Cranes
FEM 1.001 Rules for the Design of Hoisting Appliance
Electrical
API American Petroleum Institute – Applicable Standards and Regulations
CENELEC European Committee for Electrotechnical Standardization – Applicable standards
IEC International Electrotechnical Commission - Applicable Standards
ISO International Organization for Standardization – Applicable Standards
Vessels & Heat Exchangers
TEMA Standards of the Tubular Exchanger Manufacturers Association
ASME BPVC Boiler and Pressure Vessel Code
ASME Section VIII Boiler and Pressure Vessel Code, Pressure Vessels
ASME Section IX Boiler and Pressure Vessel Code, Welding and Brazing
ASTM E 165 Standard Test Method for Liquid Penetrant Examination
Instrumentation
API RP 14C Analysis, Design, Installation and Testing of Basic Surface Safety Systems on Offshore Production
Platforms
API RP 14F Design and Installation of Electrical System for Offshore Production Platform
API RP 520 Recommended Practice for the Design and Installation of Pressure Relieving Systems in Refineries
API RP 551/2/3/4/5 Manual for Installation of Refinery Instrument and Control Systems
IEC 60092 International Electrotechnical Commission - Electrical Installations in Ships
ISO International Organisation for Standardization – Applicable Standards
ISA-RP 7.1 Pneumatic Control Circuit Pressure Test
ISA-S5.1 Instrumentation Symbols and Identification
ISA-S18.1 Annunciator Sequences and Specifications
NFPA. 70 National Electrical Code
API RP 14F Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating
Offshore Petroleum Facilities
API RP 500 Recommended Practice for Classification of Locations for Electrical Installations on Petroleum
Facilities Classed as Class 1, Division 1 and Division 3
API RP 505 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum
Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2
API RP 520 Sizing, Selection and Installation of Pressure-Relieving Devices in Refineries
API RP 521 Guide for Pressure Relieving and Depressuring Systems
API 594 Wafer Check Valves
API 598 Valve Inspection and Test
API 600 Steel Gate Valves - Flanged & BW Ends
API 602 Compact Steel Gate Valves - Flanged, Threaded, Welding and Extended-body ends
API 603 Corrosion-Resistant, Bolted Bonnet Gate Valves-Flanged And Butt - Welding Ends
API 607 Fire Test For Soft-Seated Quarter-Turn Valves
API 608 Metal Ball Valves - Flanged, Threaded, And Welding End
API 609 Butterfly Valves. Lug and Wafer Type
API Spec 5L Specification for Steel Line Pipe
API Spec 6A Specification for Valves and Wellhead Equipment
API Spec 6D Specification for Pipeline Valves
API Std 526 Flanged Steel Safety-Relief Valves
API Std 527 Seat Tightness of Pressure Relief Valves
API Std 620 Welded Tanks for Low Pressure
API Std 650 Welded Tanks for Oil Storage
API Std 661 Air Cooled Heat Exchangers for Refinery Service
ASTM Applicable Material Specification
EEMUA 144 90/10 Copper Nickel Alloy Piping for Offshore Applications. Tubes
EEMUA 145 90/10 Copper Nickel Alloy Piping for Offshore Applications. Flanges
EEMUA 146 90/10 Copper Nickel Alloy Piping For Offshore Applications. Fittings
ISO 10474 (EN 10204) Steel And Steel Products - Inspection Documents
ISO 1461 Hot dip galvanised coatings on fabricated iron and steel articles.
ISO 3183 Petroleum and Natural Gas Industries – Steel pipes for Pipelines
ISO 13623 Petroleum and Natural Gas Industries - Pipeline transportation systems
ISO 4427 Polyethylene (PE) Pipes for Water Supply
ISO 13703 Petroleum And Natural Gas Industries - Design And Installation Of Piping Systems On Offshore
Production Platforms
ISO 14313 Petroleum and Natural Gas Industries – Pipeline Transportation Systems – Pipeline Valves
ISO 15590 Petroleum and Natural Gas Industries – Induction Bends, Fittings and Flanges for Pipeline
Transportation Systems
ISO 15649 Petroleum And Natural Gas Industries - Piping
NACE MR0175 (2003) Standard Material Requirements - sulphide stress cracking resistant metallic materials for oil field
equipment
Safety & Fire Protection
API RP 2A Recommended Practice for the Planning, Designing and Construction of Offshore Platforms
API RP 14C Analysis, Design, Installation, and Testing of Basic Surface Safety Systems on Offshore Production Platforms
API RP 2G Recommended Practice for Production Facilities on Offshore Structures
API RP 14G Recommended Practice for Fire Prevention and Control on Open Type Offshore Production
Platforms
IALA International Association of Light House Authorities
NFPA-10 Portable Fire Extinguishers
NFPS-11 Foam Extinguishing Systems
NFPA-12 CO2 Extinguishing Systems
NFPA-13 Sprinkler Systems
NFPA-17 Dry Chemical Extinguishing Systems
NFPA-20 Centrifugal Fire Pumps
NFPA-70 National Electric Code
NFPA-72E Automatic Fire Detectors
NFPA-101 Life Safety Code
NFPA-2001 Clean Gas Agent Fire Extinguishing Systems
SOLAS International Convention for Safety of Life at Sea (SOLAS) 1974, including Amendments 81 and 83
where consistent with safety philosophy relative to survival crafts installed on offshore hydrocarbons
production plants
ANSI A58.1 Minimum Design Loads for Buildings and other Structures - Wind Loads