You are on page 1of 5

Prior to publication, the information contained within this announcement was deemed by the Company

to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014
("MAR"). With the publication of this announcement, this information is now considered to be in the
public domain.

Erris Resources plc / EPIC: ERIS.L / Market: AIM / Sector: Mining


16 July 2018
Erris Resources plc
(‘Erris Resources’ or the ‘Company’)
Continuing High Grade Mineralisation Intersected at
Abbeytown Zinc-Lead-Silver-Copper Project, Ireland

Erris Resources plc, the European focused mineral exploration company with a portfolio of zinc and
base metals projects in Ireland and gold projects in Sweden, is pleased to announce additional drill
results from the ongoing surface diamond drilling programme at its 100% owned Abbeytown zinc
project in County Sligo, Ireland.

Highlights
● High grade mineralisation intersected in hole ERAB003 of 3m grading 10.22% Zn+Pb combined
and 41.45 g/t Ag from 95m to 98m, within a wider 7m interval grading 8.33% Zn+Pb combined
and 37.36 g/t Ag from 91m to 98m
● Broad zone of mineralisation in ERAB004, including 10m grading 2.33% Zn+Pb combined and
10.25 g/t Ag from 131m to 141m
● Mineralisation open along strike both to the north and to the southwest of these drill holes

Erris Resources CEO, Merlin Marr-Johnson, said, “Abbeytown is developing into an exciting
brownfields zinc-lead-silver project. Recent drilling has shown that mineralisation is consistently
present south of the original underground workings. Abbeytown is near-surface and with potentially
low-cost development options for the extensions of mineralisation via the existing underground access.
The ongoing drilling is helping us further define controls and geometry of the mineralisation south of
the mine and we look forward to keeping the market abreast of these developments as drilling
continues and once we start the underground drill programme.”

Further Details
A surface diamond drilling programme is ongoing at the Abbeytown project, with work focussed on
the area south of the old mine. The programme is designed to test strike and depth extensions of the
mineralisation away from the old mine. The most recent holes, ERAB002, ERAB003 and ERAB004, are
step-outs on the trend, north and south of the initial drill hole, ERAB001, and the defined strike length
of mineralisation is 75m, to date. ERAB003 and ERAB002 are 400m south of the historic workings, and
ERAB004 is 325m south of the mine. All three holes were drilled on azimuth 280o, inclined at -60o.
Mineralisation remains open both to the north and to the southwest, and Erris Resources plans further
step-out holes in both directions.

Figure 1. Map of the Abbeytown area showing ERAB001-ERAB004 and all previous drill holes, along
with the underground workings

ERAB002 was collared 50m south of ERAB001 and missed the target structure but the alteration
showed that the hole is close to the main body.

ERAB003 was moved 50m west from ERAB002 and intersected intense calcite-pyrite alteration from
surface to the first presence of sphalerite at a depth of 91m. Below 91m, the drill hole intersected
strong sulphide mineralisation in a dissolution breccia over 7m to a down-hole depth of 98m. The
general trend of the mineralisation is observed to curve to the southwest from ERAB001. Stepping
25m to the north from ERAB001, ERAB004 encountered a broad zone of sphalerite mineralisation from
100m to 144m, with pervasive dolomitisation. Erris Resources believes this to be outboard of the high-
grade zone.

Figure 2. Sketch cross section showing ERAB002 and ERAB003

The Company previously announced results from its first hole, ERAB001, on 5 July 2018 showing
results including 4m grading 10.85% Zn+Pb combined and 31.1g/t Ag from 163m to 167m.

Table 1 Highlighted intersections from ERAB003 and ERAB004

Hole ID Length m From To Ag g/t Cu % Pb % Zn % Zn % + Pb %

ERAB003 7.00 91.00 98.00 37.36 0.01 2.80 5.53 8.33

incl. 3.00 95.00 98.00 41.45 0.03 2.97 7.25 10.22

ERAB004 3.50 117.00 120.50 8.61 0.00 0.23 2.06 2.29

ERAB004 10.00 131.00 141.00 10.25 0.04 0.52 1.81 2.33

The grades reported are the length-weighted averages of the zinc, lead, copper and silver grades. The
combined grade reported above is the sum of the zinc and lead (Zn + Pb) as shown in the last column.
Composites are generated using a length weighted average for assays >2% Zn+Pb, maximum total
length of internal waste 2m, maximum consecutive length of waste 1m. The true thickness of
mineralised intervals is interpreted to be approximately 50-60% of the sampled thickness. ERAB002
did not intersect significant zinc-lead-copper mineralisation.

Technical Background
All drill holes undergo geological logging, geotechnical logging, marking up, cutting and sampling.
Collected samples are delivered to ALS Loughrea for multi-element analysis by using aqua regia leach
and ICP-MS, with Ag / Cu / Pb / Zn over range assays automatically undergoing ore grade analysis by
aqua regia and ICP-AES. CRMs, blanks and duplicates are inserted into the assay stream by Erris staff.

The technical information in this announcement has been compiled on behalf of Erris Resources by
Aiden Lavelle. Aiden Lavelle (BSc (Hons), MSc, MIGI, P.Geo) is Erris Resources' chief operating officer.
Mr Lavelle has sufficient experience relevant to the style of mineralisation and type of deposit under
consideration, and to the activity which he is undertaking to qualify as a Competent Person in
accordance with the guidance note for Mining, Oil & Gas Companies issued by the London Stock
Exchange in respect of AIM Companies, which outlines standards of disclosure for mineral projects. Mr
Lavelle consents to the inclusion in this announcement of the matters based on his information in the
form and context in which it appears.

See the Company website (www.errisresources.com/technical-reports) for maps and section.


*ENDS*

For further information visit www.errisresources.com or contact:

Merlin Marr-Johnson Erris Resources plc +44 (0) 7803 712 280

David Hart/Liz Kirchner Allenby Capital (Nominated Adviser) +44 (0) 20 3328 5656

Erik Woolgar Shard Capital (Joint Broker) +44 (0) 20 7186 9952

Andy Thacker Turner Pope Investments (TPI) Ltd +44 (0) 20 3621 4120
(Joint Broker)

Isabel de Salis/Gaby Jenner St Brides Partners (Financial PR) +44 (0) 20 7236 1177

Notes
Erris Resources plc (EPIC: ERIS.L) is an AIM quoted, European focused, discovery driven exploration
company. Supported by Canadian mining majors, Osisko Gold Royalties, which has a 18.9% interest
in the Company, and Centerra Gold KB Inc, a wholly owned subsidiary of TSX listed Centerra Gold Inc.,
the Company has an established portfolio of zinc assets in Ireland and gold projects in Sweden, which
it is looking to further build on. Led by a highly qualified team with extensive corporate and sector
experience, Erris Resources' strategy is to create shareholder value through commercial discovery of
base or precious metal assets in proven mineral districts and in favourable European jurisdictions.

You might also like