Professional Documents
Culture Documents
when the equipment is operated in a commercial environment. This About the Supplied Manuals
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
Note
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
Installation Manual (this document)
user will be required to correct the interference at his own expense.
This Installation Manual describes the names and functions of parts and controls Pin name
Pin Pin
You are cautioned that any changes or modifications not expressly approved of the Network Camera, gives connection examples and explains how to set up Pin name Color RS422/ RS485 Color
No. No. RS232C RS485(Full) (Half )
in this manual could void your authority to operate this equipment. the camera. Be sure to read the Installation Manual before operating.
All interface cables used to connect peripherals must be shielded in order to User’s Guide (stored in the CD-ROM) 1 Alarm Out 1- Blue 8 Rx- Tx-/Rx- Yellow
comply with the limits for a digital device pursuant to Subpart B of Part 15 of The User’s Guide describes how to set up the camera and how to control the 2 Alarm Out 1+ Blue 9 Rx Rx+ Tx+/Rx+ Orange
FCC Rules. camera via a Web browser. 3 Sensor in 4 Yellow 10 Tx Tx- Red
For customers in Canada (SNC-RH124/RS46N/RS44N only) After installing and connecting the camera correctly, operate referring to this
4 Sensor in 3 Orange 11 Tx+ Brown
This Class A digital apparatus complies with Canadian ICES-003. User’s Guide.
5 Sensor in 2 Red 12 GND Black
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Using the CD-ROM Manuals 6 Sensor in 1 Brown 13 Alarm Out 2- Purple
Canada.
The supplied CD-ROM disc includes the User’s Guides for this unit (Japanese, 7 GND Black 14 Alarm Out 2+ Purple
For the customers in Europe English, French, German, Spanish, Italian and Chinese versions) in PDF format.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-
ku, Tokyo, Japan. Notes
The Authorized Representative for EMC and product safety is Sony For details about functions and settings, see the user’s guide in the supplied
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For CD-ROM.
any service or guarantee matters, please refer to the addresses given in
separate service or guarantee documents.
For the customers in Europe, Australia and New Zealand
WARNING
This is a Class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
In the case that interference should occur, consult your nearest authorized
Sony service facility.
This apparatus shall not be used in the residential area.
ATTENTION
The electromagnetic fields at specific frequencies may influence the picture
of the unit.
Ceiling unit (Ceiling attachment surface)
Installation Connecting the I/O Cable
3-Screw hole Notes Wiring diagram for sensor input
ø100 (4) Do not grasp the camera head when carrying the camera. Mechanical switch/open collector output device
Do not turn the camera head manually. Doing so will likely result in the
camera malfunctioning. Camera inside Outside
Turn off the power of ceiling unit before installing or removing the camera to 3.3 V
ø130 (5 1/8)
12 the ceiling unit.
0° 0°
12
Installing the Camera on a Ceiling 10 kohms
You can view the image of this camera in the normal direction when the camera 2.2 kohms
is installed on the ceiling.
Mechanical
There are three ways to install the camera: 10 kohms
switch
Install directly on a ceiling.
to 12 V DC Mic Audio Video Connector Use the existing junction box.
or
or 24 V AC Input Output Output (14-pin) LAN In places you cannot use screws on the ceiling or in case you do not want the 10 kohms
camera to stand out, use the optional in-ceiling bracket YT-ICB124.
For details, see the installation instructions of YT-ICB124. Open collector
Install the camera to a horizontal ceiling. If you have to install the camera to an GND GND GND output device
incline, make sure the incline is within ±15° to the horizontal level to ensure the
Unit: mm (inches)
turning performance of the camera.
GND
M4×10 Camera (When installing the ceiling unit) Determine the location of the three screw holes for attaching the ceiling unit.
(supplied)
ø154 (6 1/8) Using the existing junction box Specifications
Built-in wire rope Attach the ceiling bracket to the junction box in the ceiling.
Align the triangular hole Network
Screws for this operation are not supplied. Protocol TCP/IP, ARP, ICMP, HTTP, FTP (server/client), SMTP
mark on the side surface Rating Label
Attach the ceiling bracket in a manner that the triangular mark faces the front (client), DHCP (client), DNS (client), NTP (client),
with the front side of the side of the camera. SNMP (MIB-2), RTP/RTCP
camera.
Fixing screws Compression
Video compression format JPEG/MPEG4/H.264
(6 5/8)
The ceiling unit has three holes (ø5 mm (7/32 inches)). Use these holes to screw Audio compression format G.711/G.726 (40,32,24,16 kbps)
166
junction box.
SNC-RS46P/RS44P: PAL color system
Warning Image device SNC-RH124: 1/3 type CMOS
Unit: mm (inches) SNC-RS46N/RS46P/RS44N/RS44P:
Use the appropriate screws in accordance with the condition and material of the
1/4 type interline transfer CCD
location site. Otherwise, the ceiling unit may fall and cause serious injury. Effective picture elements
Ceiling unit
10 ø10 SNC-RH124: Approx. 2,000,000
(13/32) (13/32) How to install the ceiling unit
SNC-RS46N/RS44N: Approx. 380,000 (NTSC)
1 Attach the provided wire rope to the ceiling or junction box. SNC-RS46P/RS44P: Approx. 440,000 (PAL)
(7/32)
Use screws (not supplied) that accommodate the screw holes in the ceiling or Synchronising SNC-RH124: Internal (DC 12V / AC 24V)
5
12
Notes
Horizontal resolution SNC-RH124: 480 TV (analog video output)
How to install the camera Make sure other cables are not caught in the wire rope when fixing the SNC-RS46N/RS46P/RS44N/RS44P: 530 TV
wire rope. (analog video output)
1 Ceiling unit When drawing out cables from the side of the camera, draw them through Video S/N 50 dB or more (AGC 0 dB)