You are on page 1of 2

C O N V E N T I O N A L D E T E C T I O N

Series Reversing Relay/


Synchronization Module

Model RRS-MOD
RRS-MOD
Reversing relay/synchronization module
for i3 series sounder models

Product Overview

Compatible with 2- and 4-wire i3 detec- System Sensor’s RRS-MOD reversing relay/synchronization module enhances the
tors equipped with a sounder operation of 2- and 4- wire i3 series detectors equipped with a sounder.

Activates all i3 sounders on a loop when Installation ease. The RRS-MOD includes a Velcro attachment for easy installa-
one alarms
tion into the fire alarm control panel cabinet. A quick-connect harness and
i3
Synchronizes all sounders on the loop color-coded wires simplify connections.
for a clear alarm signal
Intelligence. The RRS-MOD’s design is flexible to accommodate virtually any
Can be used with bell/alarm, alarm relay, application. The RRS-MOD is compatible with both 2- and 4-wire i3 series
or NAC outputs
detectors operating over 12V and 24V systems. The module can be used with
Includes a field-selectable switch to
either bell/alarm, alarm relay, or NAC outputs, and its field-selectable switch
accommodate both coded and continu- accommodates both coded and continuous alarm signals.
ous alarm signals
Instant inspection. To meet fire alarm requirements, the RRS-MOD activates all
Allows i3 detector silencing from the i3 sounders on a loop when one alarms. Additionally, the RRS-MOD synchro-
panel or keypad
nizes the output of the i3 sounders, regardless of whether the panel’s alarm sig-
Operates on 12- and 24-volt systems nal is continuous or coded, to ensure a clear alarm signal.

Quick-connect harness and color coded


wires facilitate connections
Architect/Engineer Specifications
Reversing relay/synchronization module alarms. The module shall provide a switch ANSI S3.41 temporal coded pattern. In
shall be a System Sensor i3 Series model to toggle between coded mode and continu- either coded or continuous modes, the
number RRS-MOD, listed to Underwriters ous mode. When in coded mode, the mod- RRS-MOD module shall permit sounders
Laboratories as a smoke detector accessory. ule shall synchronize the i3 sounders on the to be silenced at the panel. The RRS-MOD
The module shall allow all 2-wire and 4- loop to mirror the input signal. When in module shall operate between 8.5 and 35
wire i3 Series detectors equipped with a continuous mode, the module shall syn- VDC, and shall provide 18 AWG stranded,
sounder on a loop to sound when one chronize the i3 sounders on the loop to the tinned conductors connected to a quick-
connect harness.
Electrical Specifications
Operating Voltage Avg. Operating Current Relay Contact Rating
Nominal: 12 / 24 V 25mA 2 A @ 35 VDC
Min.: 8.5 V
Max.: 35 V

Physical Specifications
Operating Temperature Rangez Operating Humidity Range Wire Connections
32°F–131°F (0°C–55°C) 5% to 85% non-condensing 18 AWG stranded, tinned, 16″ long

Dimensions
Height: 2.5 inches (63 mm)
Width: 2.5 inches (63 mm)
Depth: 1 inch (25 mm)

UL LISTED
2-Wire System Triggered from Alarm/Bell Circuit:
ALARM
CONTROL
PANEL

BELL/
ALARM PURPLE
CIRCUIT T+
(positive signal
EOL
in alarm state)

BROWN
OUT+
1 + IN 1 + IN
YELLOW
2–WIRE + 2 + OUT 2 + OUT
IN+
INITIATING
DEVICE ORANGE 3 - IN/OUT 3 - IN/OUT

CIRCUIT IN– WHITE
OUT– 4 RA+ 4 RA+

5 RA- 5 RA-

+ +
RED

AUX POWER
+
PWR+

OPTIONAL

OPTIONAL
NOTE:
BLACK

PWR– REMOTE
ANNUNCIATOR
REMOTE
ANNUNCIATOR
These diagrams represent
(RA400Z) (RA400Z) S0101-00
two common wiring methods.
Refer to the RRS-MOD
UL LISTED 2-Wire System Triggered from Alarm Relay Contact:
ALARM
CONTROL installation manual for addi-
PANEL
tional wiring configurations.
ALARM PURPLE
RELAY T+
(NO Contact)
EOL

BROWN
OUT+
1 + IN 1 + IN
YELLOW
2–WIRE + IN+ 2 + OUT 2 + OUT
INITIATING
DEVICE ORANGE 3 - IN/OUT 3 - IN/OUT

CIRCUIT IN– WHITE
OUT– 4 RA+ 4 RA+

5 RA- 5 RA-

+ +
RED
+ – –
PWR+
AUX POWER OPTIONAL OPTIONAL
BLACK
– REMOTE REMOTE
PWR–
ANNUNCIATOR ANNUNCIATOR
(RA400Z) (RA400Z)
S0103-00
Ordering Information
Model Description
RRS-MOD Reversing relay/synchronization module for i3 series smoke detectors

System Sensor Sales and Service


System Sensor Headquarters System Sensor Canada System Sensor in China System Sensor – Far East System Sensor – India
3825 Ohio Avenue Ph: 905.812.0767 Ph: 86.29.524.6253 Ph: 85.22.191.9003 Ph: 91.124.637.1770 x.2700
St. Charles, IL 60174 Fx: 905.812.0771 Fx: 86.29.524.6259 Fx: 85.22.736.6580 Fx: 91.124.637.3118
Ph: 800/SENSOR2 System Sensor Europe System Sensor in Singapore System Sensor – Australia
Fx: 630/377-6495 Ph: 44.1403.276500 Ph: 65.6273.2230 Ph: 613.54.281.142
Documents-on-Demand Fx: 44.1403.276501 Fx: 65.6273.2610 Fx: 613.54.281.172
800/736-7672 x3
www.systemsensor.com

©2002 System Sensor. The company reserves the right to change product specifications without notice. A05-0350-000•11/02•#990

You might also like