You are on page 1of 9

PROJECT ON STAINLESS STEEL SEAMLESS BRIGHT

ANNELED HEAT EXCHANGER AND INSTRUMENTS TUBES

1 Products
1.1 Details of Major Products

STAINLESS STEEL SEAMLESS BRIGHT ANNELED HEAT EXCGANGER TUBES &

U TUBES (HIGH PR ECISION TUBES).


1.1.1 Product Range

Outside Diameter: 6.00 mm to 101.60 mm

Wall Thickness: 0.70 mm to 8.00 mm


Grades: TP 304/L/H, TP 316/L/H/Ti, TP 310/H/L/S, TP 317/L,
TP 321/H, TP 347/H, TP 405, TP 409, TP 410, TP 430,
UNS S 31500, 31803, 32205, 32750, 32760

Specifications: ASTM, ASME, DIN EN (GERMAN), NF (AFNOR), JIS (JAPAN)

1.1.2 Application

• Heat Exchangers • Chemical & Petrochemical • Gas Industry

• Nuclear Power Generation • Aerospace • Pressure Vessels

• Marine Equipments • Food Processing • Automotive


2 STAINLESS STEEL SEAMLESS TUBES (HYDRAULIC &
INSTRUMENTATION TUBING)- BRIGHT ANNEALED
2.1.1 Product Range

Outside Diameter: 6.00 mm to 60.00 mm

Wall Thickness: 0.70 mm to 8.00 mm

Grades: TP 304/L/H, TP 316/L/H/Ti, TP 310/H/L/S, TP 317/L,


TP 321/H, TP 347/H, TP 405, TP 409, TP 410, TP 430,
UNS S 31500, 31803, 32205, 32750, 32760

Specifications: ASTM, ASME, DIN EN (GERMAN), NF (AFNOR), JIS (JAPAN)

2.1.2 Application

• Oil & Gas Extraction • Chemical & Petrochemical • Nuclear Power

• Food & Beverage Processing • Automotive • Aerospace


3 STAINLESS STEEL SEAMLESS PIPES - ANNEALED &
PICKLED
3.1.1 Product Range

Outside Diameter: 1/8" NPS to 12" NPS

Wall Thickness: SCH 5S to SCH XXS

Grades: TP 304/L/H, TP 316/L/H/Ti, TP 310/H/L/S, TP 317/L,


TP 321/H, TP 347/H, TP 405, TP 409, TP 410, TP 430,
UNS S 31500, 31803, 32205, 32750, 32760

Specifications: ASTM, ASME, DIN EN (GERMAN), NF (AFNOR), JIS (JAPAN)

3.1.2 Application

• Onshore and Offshore Oil and Gas • Chemical & • Energy and
Production, Exploration and Transport Petrochemical Power
(OCTG – Oil Country Tubular Goods) Generation

• Mechanical and Plant Engineering • Liquefaction Projects

3.3 Technical Data

All Arvind products are manufactured under strict process control and monitored
throughout the production process. They are subjected to a number of checks to
ensure total control conformity to specifications.

3.3.1 Chemical Analysis


Chemical Test as per required quality.

3.3.2 Corrosion Test


Corrosion test is conducted only when specially requested by the client.

3.3.3 Destructive/Mechanical Testing


Tensile, Hardness, Flattening, Flare, Flange and Reverse-bend tests are carried out in
full compliance with relevant standards, i.e. ASTM A-1016 and A-999 norms. This
ensures trouble-free expansion, welding and use at customers end.
3.3.4 Eddy Current Testing
To detect homogeneities in subsurface, eddy current testing is carried out using
Flaw-mark Testing System.

3.3.5 Hydrostatic Testing


100% Hydrostatic Testing is carried out according to ASTM - A 1016 norms to
check tubes for leakage.

3.3.6 Making
To ensure complete identification and traceability, all the information as required by
the standards i.e. Brand Name, Size, Grade, Specifications, heat No., / Lot No. is
marked on all the pipes and tubes by using the latest inkjet marking machine.

3.3.7 Visual Inspection


After passivation, every single length of tubes and pipes is subjected to a thorough
visual inspection by trained staff to detect surface flaws and other imperfections.

3.3.8 Air under Press Test


Tubes are internally pressurized with clean and dry compressed air and being
submerged in clear water to check any evidence of air leakage.

3.3.9 Supplementary Test

 IGC Test (Inter Granular Corrosion Test)


 Micro-Structure Analysis
 Macro
 Radiography Test
 Ultrasonic Test
 Liquid Penetrate Test
 Eddy Current
 Hot Tensile
4 Manufacturing Process

You might also like