You are on page 1of 2

25th.

NATIONAL SKILLS COMPETITION


Solo 2017

Task day-2, Module 3


Mechanical Design Challenge

INTRODUCTION
A potential customer of Crane manufacturing company want to order a special crane with an
additional option. They ask you to complete a proposal drawing and video animation of this
modification.

DESCRIPTION OF PROJECT AND TASKS


Base on the task module no. 1 that you have made, create a modification. You have to make an
additional device from the basic product. The additional option is a floating jack to support the legs.
Your task is to make a proposal drawing of this option.

You have 2 hours to complete this project.

INSTRUCTIONS TO THE COMPETITOR

Model and Assemble the Parts


1. Use your works of modul 1 as base model.
2. Create all required parts of your modification design.
3. The floating jack operate manually by hand (screw/ thread mechanism).
4. You may use steel plate and/ or solid cylinder steel as material for your additional
parts.
5. You may use also a standard part from content center to support your design

Create Drawings
1. On the first sheet (sheet format A2), create an 2D final complete assembly
drawing with 1 : 10 scale.
 Add balloons and a part list.
 The number of view is at the competitors discretion, section view is needed to
show the hidden parts.
 Indicate in the drawing, the three major dimensions of the assembled product,
operational stroke angle and fold angle of the legs.
 The list should have 5 columns (Item, Qty., Part Number, Material and
Discription).
 All parts must be listed.

25th. National Skills Competition - Solo 2017


25th. NATIONAL SKILLS COMPETITION
Solo 2017

2. On the second sheet2 (sheet format A2), create an isometric shaded of final
complete assembly drawing with 1 : 15 scale.
 Add balloons and a part list.
 The number of view is at the competitors discretion, section view is needed to
show the hidden parts.
 Indicate in the drawing, the three major dimensions of the assembled product,
operational stroke angle and fold angle of the legs.
 The list should have 5 columns (Item, Qty., Part Number, Material and
Discription).
 All parts must be listed.

3. On the third sheets (sheet format A3), create a working drawing of all new part,
unspecified scale. The number of view is at the competitors discretion, section view
is needed to show the hidden parts.

Output:
1. Save all your drawing as the instruction from jury.
2. Print out your drawing in A3 paper.

MARKING

Module Mechanical Design Challenge


Max Mark
3 (Criteria Name or Description)

3.1 Fulfilment of the Design Brief 5.00

3.2 Physical Simulation 5.00

3.3 Exploded view (simulation) 4.00

3.4 Photo rendering 1.00

25th. National Skills Competition - Solo 2017

You might also like