Professional Documents
Culture Documents
1. Identification
Product identifier RTV Silicone Sealant - Clear (pressurized)
Other means of identification
Product code 14055
Recommended use Sealant and adhesive
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Manufactured or sold by:
Company name CRC Industries, Inc.
Address 885 Louis Dr.
Warminster, PA 18974 US
Telephone
General Information 215-674-4300
Technical 800-521-3168
Assistance
Customer Service 800-272-4620
24-Hour Emergency 800-424-9300 (US)
(CHEMTREC) 703-527-3887 (International)
Website www.crcindustries.com
2. Hazard(s) identification
Physical hazards Gases under pressure Compressed gas
Health hazards Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2B
Environmental hazards Hazardous to the aquatic environment, acute Category 3
hazard
Hazardous to the aquatic environment, Category 3
long-term hazard
OSHA defined hazards Not classified.
Label elements
97.2% of the mixture consists of component(s) of unknown acute hazards to the aquatic environment. 97.2% of the mixture
consists of component(s) of unknown long-term hazards to the aquatic environment.
3. Composition/information on ingredients
Mixtures
Chemical name Common name and synonyms CAS number %
Polydimethylsiloxane, 70131-67-8 >= 70
hydroxy-terminated
Amorphous silica 7631-86-9 7 - 13
Distillates (petroleum), 64742-46-7 5 - 10
Hydrotreated Middle
Ethyltriacetoxysilane 17689-77-9 1-5
Methyltriacetoxysilane 4253-34-3 1-5
Polydimethylsiloxane 63148-62-9 1-5
Nitrogen 7727-37-9 1-3
Specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Inhalation Move to fresh air. Get medical attention immediately.
Skin contact Remove contaminated clothing immediately and wash skin with soap and water. If skin irritation
occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse.
Eye contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Ingestion Rinse mouth. Get medical attention.
Most important Irritation of eyes and mucous membranes. Exposed individuals may experience eye tearing,
symptoms/effects, acute and redness, and discomfort. Skin irritation. May cause redness and pain.
delayed
Indication of immediate Provide general supportive measures and treat symptomatically. Keep victim under observation.
medical attention and special Symptoms may be delayed.
treatment needed
General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
5. Fire-fighting measures
Suitable extinguishing media Water. Dry chemical, CO2, or water spray.
Unsuitable extinguishing None known.
media
Specific hazards arising from Contents under pressure. During fire, gases hazardous to health may be formed. When heated to
the chemical temperature above 300°F/150°C in the presence of air, product may form formaldehyde vapors.
When exposed to water or humid air, product evolves acetic acid (HOAc).
Special protective equipment Firefighters must use standard protective equipment including flame retardant coat, helmet with
and precautions for firefighters face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Wear self-contained breathing
apparatus and protective clothing.
Fire-fighting In case of fire: Stop leak if safe to do so. Do not move cargo or vehicle if cargo has been exposed
equipment/instructions to heat. Containers should be cooled with water to prevent vapor pressure build up. For massive
fire in cargo area, use unmanned hose holder or monitor nozzles, if possible. If not, withdraw and
let fire burn out. In the event of fire, cool tanks with water spray.
Skin protection
Hand protection Wear protective gloves such as: Nitrile. Butyl rubber.
Other Wear appropriate chemical resistant clothing.
Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment. Air monitoring is needed to
determine actual employee exposure levels.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene When using do not smoke. Always observe good personal hygiene measures, such as washing
considerations after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
* Estimates for product may be based on additional component data not shown.
Persistence and degradability No data is available on the degradability of this product.
Bioaccumulative potential No data available.
Partition coefficient n-octanol / water (log Kow)
Nitrogen 0.67
Mobility in soil No data available.
Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.