You are on page 1of 2

DAFTAR PUSTAKA

1. Bieniawski, Z. T.1984.”Rock Mechanics Design in Mining and


Tunneling”.A.A. Balkema. Boston.

2. Bieniawski, Z. T.,1967.“Mechanism of Brittle Fracture of Rock”.Faculty of


Engineering University of Pretoria, Pretoria.

3. Bischoff, P. H.,Perry, S. H., 1991.“Compressive Behaviour of Concrete at


High Strain Rates (Materiaux et Construction) 24, 425-440.

4. Deere, D.U and Miller, R.P.,1966.“Engineering Classification and Index


Properties of Intact Rock”. Air Force Laboratory Technical Report, No.AFNL-
TR,65-116, Albuquerque, NM.

5. Hawkes, I dan Mellor, M.,1970. “Uniaxial Testing in Rock Mechanics


Laboratories”. Elsevies : Netherlands. Vol.4.,177-285.

6.

7. ISRM.,1981. “Suggested Method for Determining Uniaxial Compressive


Strenght and Deformability of Rock Materials. In : Rock Characterization
Testing and Monitoring ISRM Suggested Methods, Ed. E.T. Brown, Pergamon
Press, London, 113-119.

8. Jumikis, A.R.,1983:”Rock Mechanics Second Edition, Trans Tech Publication


Clausthal-Zellerfeld.“ Republic of Germany Federal.

9. Liang, W.g., Y.S. Zhao, S.G. Xu, M.B. Dusseault.,2010.”Effect of Strain Rate
on The Mechanical Properties of Salt Rock.” International Journal of Rock
Mechanics & Mining Sciences.

10. Paul,B. dan Gangal, M.,1996. ”Initial and Sudsequence Fracture Curves for
Biaxial Compression of Brittle Materials.” Proc. 8th Symp. Rock Mech., 113-
141.

11. Pettijohn, F.J., 1975. “Sedimentary Rock: Harper and Row Publisher”.,New
York Evanston, San Fransisco. London.

12. Rai, Made Astawa, Karmadibrata, S.,2014. Mekanika Batuan, Departemen


Teknik Pertambangan, Institut Teknologi Bandung
13. Smorodinov, M.I., Motovilov, E.A., Volkov, V.A., 1970. “Determinatioan of
Correlation Relationships Between Strenght and Some Physical Chracteristic
of Rocks (Vol.2), Proc. 2nd Cong. Int. Soc. Rock Mechanic, Belgrade, 35-37.

14. Sukandarrumidi.,1999. “Bahan Galian Industri”. Gadjah Mada University


Press.,Yogyakarta.

15. Vutukuri, V.S.,Lama, R.D., 1976. “ Handbook on Mechanical Properties of


Rocks, testing Techniques and Result, 1st ed.,Germany : Trans Tech.
Publication.

16. Watimena, R.K., 1991, Perilaku Mesin Tekan Controls seri CAT 23/G dan
CAR 51/F Pada Pengujian Kuat Tekan Uniaxial dan Pengujian Triaksial
Bauan. Bandung : Institut Teknolog Bandung

17. Woei-Shyan Lee an Jan-Kung Chou.,2005.”The Effect of Strain Rate on The


Impact Behaviour of Fe-2 mass% Ni Sintered Alloy”. Material Transactions,
Vol.46. The Japan Institute of Metals.,805-811.

18. Zhang, L.Y, Mao, X.B, Liu Ruixue.,2014. “The Impact of Loading Rate on
Mechanical Property of Mudstone at High Temperature”.Mining Science and
Technology (China), Vol. 19.,3019-3027.

You might also like