Professional Documents
Culture Documents
Parameter Specification
● IEC 60947-6-1 ‘Low voltage switchgear and control gear – Part 6-1 : Multiple
International Standard function equipment – Transfer Switch equipment
Compliance ● GB/T 14048.11
● Both ATS Switch Module and Controller can be installed vertically or horizontally in
Installation Orientation a electrical switch board cabinet
● Rated Source operating voltage of control (Us) for the control device and the
transfer controller is AC 220V / 230V : 50Hz.
Control Circuit ● Operating Source control voltage is between 85% Us and 110% Us.
Factory preset voltage trigger point is Under-voltage 180V, Over-voltage 250V.
User may request other setting when placing order.
● The auxiliary contact circuit has a separate electrical structure of 4 normally open
and 4 normally closed contacts.
AUX Circuit ● Rated isolation voltage (Ui) = 300V
● Rated operating current (Ie) = 3A for 220VAC
● Rated operating current (Ie) = 0.2A for 200VDC
Leg en d
A : Width
B : Mounting hole
C : Height
2H : Bar to Bar
J : Depth
2P 3P 4P
MH-ATS Model
A B C A B C A B C H J
S2/S3 20-63A 185 88 193 227 110 193 229 132 193 112
S2/S3 80-125A 218 103 200 251 133 200 281 163 200 112
Note: Picture for illustration only. For detail please refer to Data Sheet.
Authorised Dealer:
MH-ATS-201308
Product specifications and features are subject to change without prior notice.