You are on page 1of 2

Leading the Industry in

MICROINVERTER Microinverter Technology

YC1000-3
Commercial Microinverter

• Single unit connects up to four modules


• 900W AC output
• True 3-phase output
• 208V, 277/480V
• ZigBee wireless communication and
monitoring
• Up to 44 solar modules (11 x YC1000) in a
circuit (on a 15A breaker)

The world’s first 3-phase microinverter – only from APS


The YC1000 is the industry’s first true 3-phase solar
WIRING SCHEMATIC
microinverter, handling commercial grid voltages
of 208, 277/480 with 900 watts maximum output,
ZigBee communication and an integrated ground.
Up to 11 units (44 modules total, 60- or 72-cell)
can be linked in a single 15A circuit.

DIMENSIONS
1.3” (35mm) 10.1” (259mm) 19.6” (500mm)
6.6” (170mm)
9.5” (242mm)

APSamerica.com
APS YC1000-3 Microinverter Datasheet
INPUT DATA (DC)
Recommended PV Module Power Range (STC) Up to 310W (4 Module Configuration)
Up to 360W (3 Module Configuration)
MPPT Voltage Range 16-55V
Maximum Input Voltage 60V
Maximum Input Current 14.8A x 4
Startup Voltage 22V

OUTPUT DATA (AC) 277/480V 208V


Maximum Output Power 900W 900W
3-Phase Grid Type 277V/480V 208V
Nominal Output Current 1.08Ax3 2.50Ax3
Nominal Output Voltage 277Vx3 120Vx3
Nominal Output Frequency 60Hz /59.3-60.5Hz *
60Hz /59.3-60.5Hz*
Power Factor >0.99 >0.99
Total Harmonic Distortion <3% <3%
Maximum Units per Branch 11 for 15Ax3 Breaker 4 for 15Ax3 Breaker

EFFICIENCY
Peak efficiency 95%
CEC Weighted Efficiency 94.5%
Nominal MPPT efficiency 99.9%

MECHANICAL DATA
Operating Ambient temperature range -40°F to +149°F (-40°C to +65°C)
Operating Internal temperature range -40°F to +185°F (-40oC to +85°C)
Storage Temperature Range -40°F to +185°F (-40oC to +85°C)
Dimensions (W x H x D) inches 10.2” X 9.5” X 1.4”
Dimensions (W x H x D) mm 259mm X 242mm X 36mm
AC Bus Cable 14AWG
Weight 8.4lbs/3.8kg
Enclosure rating NEMA 4X
Cooling Natural Convection

FEATURES
Communication ZigBee wireless
Integrated Ground Fault Protection (GFP) The DC circuit meets the requirements for
ungrounded PV arrays in NEC690.35. No
additional ground is required. Ground fault
protection (GFP) is integrated into microinverter.

Emissions & Immunity (EMC) Compliance FCC Part15; ANSI C63.4; ICES-003
Safety Class Compliance UL1741xCSA C22.2 No.107.1-01
Grid Connection Compliance IEEE1547
Warranty 10 years standard, extendable to 25 years
*xProgrammable per customer and utility requirements. All settings UL approved
2.17.15 © All Rights Reserved
Specifications subject to change without notice – please ensure you are using the
most recent update found at www.APSamerica.com

1015 Hostmark St., Suite 104, Poulsbo, WA 98370 | 844.666.7035 | APSamerica.com


MICROINVERTER

You might also like