You are on page 1of 71

Bushmaster Catalog

R E C E I V E R S / B A R R E L S / PA R T S & A C C E S S O R I E S

Over 30 years of quality and service


Lower Receivers
2009 BUSHMASTER FIREARMS ACCESSORIES
Parts Reference Schematic . . . . . . 36-37
Lower Receivers . . . . . . . . . . . . . . . . . . . 2 Barrel Parts/Compensators/Supressors/ Gunsmithing Accessories . . . . . . . . 39-44
Upper Receivers . . . . . . . . . . . . . . . . . . . 3 Muzzle Brakes . . . . . . . . . . . . . . . . 16-18 Competition Rifle Parts . . . . . . . . . . 45-48
Lower Receiver Parts & Kits . . . . . . . . 4-7 Magazine Accessories . . . . . . . . . . 19-22 Sights/Scopes/Mounts . . . . . . . . . . 49-61
Upper Receiver / Barrel Assemblies . 8-10 Slings & Bipods . . . . . . . . . . . . . . . 23-25 Accessories . . . . . . . . . . . . . . . . . . 62-64
Upper Receiver Parts . . . . . . . . . . . 10-11 Pistol Grips & Buttstocks . . . . . . . . 26-31 Apparel . . . . . . . . . . . . . . . . . . . . . . 64-68
Barrels / Barrel Assemblies . . . . . . 12-15 Handguards & Accessories . . . . 32-35,38 Order Form/Exchanges/Warranty, etc . . 69

A Rock-solid, Reliable Base: “Stripped” Lower Receivers.


Bushmaster Modular Lower Receiver. • Build a Bushmaster rifle from the ground up with
• Receivers and components some of the most our stripped lower receiver housings
reliable on the market • Machined from highest quality aircraft aluminum
• Modular design makes part replacement/ forgings
maintenance simple • Requires a Bushmaster complete lower receiver parts
• Available as complete assemblies or as stripped kit and your choice of buttstock
housings, with or without buttstocks • Bushmaster offers a complete rifle build-up video,
Lower Receiver Assembly with Pistol Grip or you may also referencethe U.S. Government
(A LOW W/O STK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $285.00 M16A2 technical manual
Available for
or 6.8mm SPC Caliberr . . . . . . . . . . . . . . . . . . . . . . . . . Stripped Lower for 5.56mm . . . . . . . . . . . . . (9349102-S) $200.00
(A LOW W/O O STK-68)
T . . . . . . . . . . . . . . . . . . . . . . . . . . . . $$285.00 Stripped Lower for 6.8mm . . . . . . . . . . . .(9349102-S-68) $200.00
MSRP MSRP

Six Position
tion “Telestock” and
Pistol Grip
rip Lower Receivers.
• Complete lower unit with all Bushmaster
components, ready to snap onto your upper receiver
• FFL is required for purchase, or order through
your FFL dealer
Carbon 15
* Note: Assemblies with Telestocks may still be illegal in some states.
Check your state and Country Statutes to determine legality. Also avail- “Stripped” LLower R
Receivers.
Receivers
i
able - Lower Assembly with ATF approved fixed length Tele-Style stock. • Molded of carbon fiber, these units are Lightweight,
Lower w/Telestock . . . . . . . . . . . . . . . . . . .(A LOW TELEP) $370.00 durable and cooler
Available for 6.8mm SPC Caliber . . . . . (A LOW TELEP-68) $370.00 • They are solid color throughout – no finish to
Lower w/Fixed Telestock k. . . . . . . . . . . . . .(A
Telestock. ( LOW PERMX)
. (A P $370.00
$3 wear through
MSRP • These are the same receivers we use on our
“Flat-Top” carbine and others
• Standard “AR” parts (like our lower receiver parts kit)
are ready to drop right in
C15 M4 Type Receiver . . . . . . . . . . . . . . . . . . . (AZ15780) $200.00
C15 R21/97/97S Receiver . . . . . . . . . . . . . . . . (AZ15180) $200.00
C15 P21/97 Pistol Receiver . . . . . . . . . . . . . . . (AZ15179) $200.00
MSRP

Trapdoor and Skeleton Stock Lower Receivers.


• Available in solid A2 buttstock with trapdoor storage
compartment or sleek, lightweight skeleton stock
• Skeleton stock features a rubber buttpad, neoprene foam
sleeve over extension tube and multiple mounting points for
the Q.D. sling swivel (included)
*Note: FFL required for purchase of any Lower Receiver.
5.56mm/.223 Caliber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (A LOW STD) $345.00
Available for 6.8mm SPC Caliber . . . . . . . . . . . . . . . . . . . . (A LOW STD-68) $345.00
Lower w/Ace Skeleton Stock . . . . . . . . . . . . . . . . . . . . . (A LOW SKELETON) $425.00

2 Orders 24 Hrs: 1.800.998.7928 NOTE: All lower receivers are available in 450 Bushmaster.
Upper Receivers

Complete A2 Upper Receiver. V Match (Flat Top)


• Forged of 707 aircraft aluminum, units are machined Upper Receiver.
to meet or exceed mil. Spec • The A3 “Flat-Top” with its Picatinny rail allows virtually
• Hard anodized to a dark grey non-reflective finish unlimited mounting of scopes, sights and optics
• Includes an Integral brass deflector and a baked-on • Carefully machined from 7075T6 aircraft aluminum
dry film lube coating inside for long wear and smooth forgings and is complete as shown with ejection port
carrier operation cover and forward assist
• Charging handle not included V Match (Flat Top) Upper Receiver . . . . . . . . . .(VUR-M2) $190.00
Complete A2 Upper Receiver . . . . . . . . . . . . . .(A2UR-M2) $195.00

Stripped V Match (Flat Top) Upper Receiver


Bushmaster A2 Stripped Upper Receiver. • Fully machined and hard anodize finished aircraft quality
• Fully machined, hard anodize finished forging is dry- aluminum forging ready for assembly
lubed and ready to assemble • Requires ejection port cover assembly and forward
• Ready to assemble with top Bushmaster quality parts assist assembly for completion
• Requires a rear sight; forward assist assembly and Stripped V Match (Flat Top) Upper Receiver
ejection port cover assembly for completion 8448524-V-M2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.00
(8448524-V-M2) .$155.0
Bushmaster A2 Stripped Upper Receiver. . (9349063-M2) $125.00

Carbon 15 Molded Upper Receivers.


• Tough yet lightweight these upper receivers are molded
of carbon fiber composite originally developed for the
Bushmaster A1 Upper Receivers. Aerospace Industry.
• Impervious to corrosion, they are solid color throughout
• This version includes an elevation adjustment
– no surface finish to wear off
• Forward assist assembly available in either “tear-drop”
• Use these receivers to build the lightest AR type rifle
type button or round type
around. No ejection port covers or forward assist
• Aircraft quality aluminum forgings are used for
assemblies required
superior strength, and they include integral cartridge
case deflector Carbon 15 Flat-Top Upper Receiver . . . . . . . . . (AZ15747) $155.00
• Finish is a mil. spec., non-reflective hard anodized with Carbon 15 Flat-Top Upper Receiver
w/Forward Assist & Dust Cover . . . . . . . (AZ15747FADC) $190.00
a baked on dry film lube coating inside to ensure long Carbon 15 Pistol Upper Receiver . . . . . . . . . . . (AZ15067) $139.95
wear and smooth carrier operation
Complete A1 Upper Receiver Assembly . . . . . .(A1UR-M2) $160.00
Stripped A1 Upper Receiver Assembly. . . . (8448524-M2) $125.00

www.bushmaster.com 3
Lower Receiver Parts & Kits

Complete Lower Receiver Parts Kit “Lost” Parts Kit for AR15 Type Rifle
• Everything necessary to completely build up your • Contains all the most critical springs, detents, inserts and
Lower Receiver pins – will get your gun back to full function in short order
• Kits available with either AR15 or M16* components. Competition Trigger . . . . . . . . . . . . . . . . . . . . . . . (CP-KIT) $13.50
(Lower Receiver and Auto Sear are not included)
AR15 Lower Parts Kit . . . . . . . . . . . . . . . . . . . (ALOW KIT) $69.50
M16 Lower Parts Kit . . . . . . . . . . . . . . . . . . . . (MLOW KIT) $69.50
*NOTE: M16 parts require FFL or MG Tax Stamp.
M16 Parts are NOT Legal for Sale in California.

Field Repair Kit


• High breakage and loss items in a heavy zip-lock bag
AR-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (A FIELD) $31.95
M-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (M FIELD) $31.95
*NOTE: M16 Parts are NOT Legal for Sale in California.

DCM Competition Complete


Lower Receiver Parts Kit
• Parts shown above plus our Adjustable Two Stage
Competition Trigger
AR15 Lower Parts Kit . . . . . . . . . . . . . . (ALOWKITCOMP) $170.95

Bushmaster Competition Trigger


• Finely honed competition trigger – ready for installation
in your Lower Receiver
• Can be set for a 3 1/2 lb. DCM legal 1st Stage, and a Bushmaster BA50 Field Repair Kit
1 lb. (2nd Stage) letoff • All necessary parts for emergency field repairs on the new
Competition Trigger . . . . . . . . . . . . . . .(8448592-SCGK) $127.95 Bushmaster BA50 .50 BMG Caliber Rifle and Carbine
Two Stage Competition Trigger with Bushmaster BA50 Field Repair Kit . . . . . . . . (BMG FIELD) $74.95
Ambidextrous Safety . . . . . . . . . . . . . (8448592-SCGKA) $148.95
*NOTE: This Trigger will not fit in Colt Lowers with Block over Safety.
Won't work with Large Colt Pivot Pins. XM15/AR15/M16 Emergency Survival Kit
• Survival Kit is packed in a belt mountable
Olive Drab Carrying Case
Specify with part numbers below: A1 Type (Round Front
Sight Post) or A2 Type (Square Front Sight Post) and
AR15 (AR) or M16 (M) parts
Survival Kit w/A1 Sight Tool
AR-15(AR EMERG A1) M-16(M EMERG A1) . . . . . . . . . . . . $63.95
Survival Kit w/A2 Sight Tool
AR-15(AR EMERG A2) M-16(M EMERG A2) . . . . . . . . . . . . $63.95
Note: M16 parts require an FFL or Form 4 for purchase.

Complete AR15/M16 Pin & Detent Package


• Includes every pin and detent in the gun
Complete AR15/M16 Pin & Detent Package. .(AR PIN PKG) $7.50

4 Orders 24 Hrs: 1.800.998.7928


Bushmaster Receiver AR15 or M16*
Spring Package Ambidextrous Safety Selector
(SM SPRING PACK) $2.95 • Installs easily into your lower receiver
• For the M16 part, an FFL, or a copy of your Form 4
• Top quality Bushmaster is required for sale
Spring Kit
AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (MMT-0007K) $36.95
M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (MMT-0006K) $36.95
*M16 Parts are NOT Legal in California.

Complete AR15
Spare Parts Kit
• One “super-kit” that will Ambidextrous Safety Selector
take care of all your AR15 for Carbon 15 Rifles
rifle’s spare parts needs
• For Type 21 or 97 Rifles and Pistols
Complete AR15 Spare Parts Kit
w/Rifle Buffer Spring
• Machined of aircraft quality aluminum
(ARPARTSKIT) $39.50 • Right side operating lever molded
of Carbon 15 composite
Complete AR15 Spare Parts Kit Ambidextrous Safety Selector
w/Carbine Buffer Spring for Carbon 15 Rifles . . . . . . . . . . . . . . . . . . . . . . . (AZ724) $33.50
(ARPARTSKIT-C) $39.50 Right Side Operating Lever Only . . . . . . . . . . . . . (AZ724) $11.95
Note: If you have our Fixed Length
Tele-Stock, please choose the Rifle
Buffer Spring Package.

Complete Spring
Package
• Every spring in the gun,
including the Buffer Spring
AR15/M16 Accu-Wedge
Telestock Carbine
(A COMP SPR PKG-C) $10.50 • Accu-Wedge eliminates play between Upper and
Lower Receivers for a more solid feel
Standard A2 Solid Stock • Easily installed, no modifications required
(A COMP SPR PKG) $10.50
• Buffers the cycling system to reduce wear on the
impacting surfaces
Accu-Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ACU1B) $6.50

MagPul Enhanced Ambidextrous Magazine Release


Aluminum Trigger • Release magazines from either
Guard for AR15/M16 side of the receiver
• Uses stock button and spring
• Drop-in oversized trigger guard that replaces the • Made in U.S.A.
standard plastic or metal type
Ambidextrous Magazine Release
• Made in U.S.A. / Instructions included (8448638-ambi). . . . . . . . . . . . . . . . . . . . . . . . . $95.95
MagPul Enhanced Aluminum Trigger Guard for AR15/M16
(MAG015) $19.95

Quick-Pull Takedown Pin for Carbon 15


Top Loading Carbine
• Makes opening the Receivers of the
Top Loading Carbine easier and faster
Quick-Pull Takedown Pin
(AZC-15120) $3.95

www.bushmaster.com
co 5
Lower Receiver Parts & Kits

AR-AR Push Pin M16*A2 Three Shot Burst Set


• Replaces the big two-screw bolt in the front pivot hole on • Installation of this set in your M16A1 machine gun will
Colt receivers (will only fit Colt Sporters) give you a Three Shot Burst capability as in the M16A2.
• Converts receiver to standard takedown operation – • An FFL is required for sale, or a copy of your Form
as on the military version 4. Not legal for installation in anything but a licensed
AR-AR Push Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . (OAK-01) $10.95 machine gun.
M16 A2 Three Shot Burst Set . . . . . . . . (3SHOT BURST KIT) $63.95
*M16 Parts are NOT Legal for Sale in California.

Expandable Tensioning Pin For All


AR15 Type Rifles
• Designed to cure a loose fit between older upper
and lower receivers
Expandable Tensioning Pins . . . . . . . . . . . . . . . . . . . (ARTP) $36.95

M16* Full Auto Sear


Anti-Walk Pins for XM15, AR15 and M16 • Includes Pivot Pin, Bushing and Spring
• Designed to prevent trigger or sear pin walkout under • Note: An FFL or Tax Stamp is required for purchase
rapid fire conditions M16 Full Auto Sear . . . . . . . . . . . . . . . . . . . . . . . (8448595) $31.95
Set of Two Pins with Circlips . . . . . . . . . . . . . . . . .(WE-002) $6.50 *Note: M16 Parts are NOT Legal for Sale in California.

Offset Pin
• Adapts a Colt Lower Receiver (with large hole) to M16
Forward Assist type Upper Receiver with smaller hole
Offset Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (NES-06) $6.50 AR15 or M16* “Re-hab” Kit
• Hammer, Trigger, Safety Selector and Disconnector
• M16 Kit must be used in a Title II Receiver for legality –
an FFL or Tax Stamp is required for sale
For Semi-Auto AR15 . . . . . . . . . . . . . . . . . . . . . . (A REHAB) $35.95
For Full-Auto M16 . . . . . . . . . . . . . . . . . . . . . . . (M REHAB) $35.95
*Note: M16 Parts are NOT Legal for Sale in California.

Individual Lower Receiver Parts for Late


Model COLT AR15s
• These are the hard to find parts for the late model Colts
requiring the larger .172" diameter Hammer and Trigger
Pins
Hammer. . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448612-SCK) $23.50
Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448592-SC) $21.50
Disconnector . . . . . . . . . . . . . . . . . . . . . . . . . . (8448635-SC) $7.50
Hammer or Trigger Pin . . . . . . . . . . . . . . . . . . . (8448609 C) $3.50
All 5 Parts in a Kit . . . . . . . . . . . . . . . . . . . . . .(AR COLT KIT) $53.95

6 Orders 24 Hrs: 1.800.998.7928


A STATEMENT FROM BUSHMASTER REGARDING MACHINEGUN PARTS
The position of the Bureau of Alcohol, Tobacco and Firearms (ATF) is that if your AR15 type rifle contains even one M16 com-
ponent, it is a Machine Gun. If you own an AR15 from any manufacturer, check to make sure there are no M16 components
in its assemblies. If there are, remove them immediately. Machine them to AR configuration, or replace them and destroy the
M16 components. Refer to the illustrations below to determine if you have M16 components in your assemblies. If you have
any questions about your parts, give us a call and we’ll be glad to supply you with the legally acceptable parts.
Sales of M16 components by Bushmaster Firearms International, LLC will only be made to the following categories
of customers: (1) Class 3 (NFA) Dealer, (2) Individual who has a registered NFA weapon, (3) Federal Firearms
Licensee with a customer who has a registered NFA weapon.

Note the differences* between the corresponding parts in each drawing.

AR15 PARTS M16 PARTS


Hammer with J pin 8558612-SK Hammer with J pin 8558612-K

Safety
Safety Selector
Selector Lever
Lever 9381367
Note “closed” area 9381367-S Note “closed” area
Trigger Trigger
8448592-S 8448592

Disconnector Disconnector
9349114-S 8448635

Bolt Carrier Bolt Carrier


8448507-S 8448507

Individual Parts for Lower Receivers Pivot Pin Spring . . . . . . . . . . . . . . . . . . . . . . (8448586) .55
AR15 Safety Selector . . . . . . . . . . . . . (9381367-S) $10.95
Bolt Catch Assembly . . . . . . . . . . . . . . .(A BCAT ASS) $6.50
M16 Safety Selector* . . . . . . . . . . . . . . . (9381367) $10.95
Bolt Catch . . . . . . . . . . . . . . . . . . . . . . . . . (8448628) $5.50
Safety Detent . . . . . . . . . . . . . . . . . . . . . . (8448631) $1.00
Bolt Catch Spring . . . . . . . . . . . . . . . . . . . . . (8448633) .55
Safety Detent Spring . . . . . . . . . . . . . . . . . . . (8448516) .85
Bolt Catch Plunger . . . . . . . . . . . . . . . . . . . . (8448634) .55
Take Down Pin (Rear) . . . . . . . . . . . . . . . . (8448584) $4.20
Bolt Catch Pin . . . . . . . . . . . . . . . . . . . .(MS16562-119) .55
Take Down Pin Detent . . . . . . . . . . . . . . . . . . (8448585) .55
Buffer Detent . . . . . . . . . . . . . . . . . . . . . . . (8448582) $1.60
Take Down Pin Spring . . . . . . . . . . . . . . . . . . (8448586) .55
Buffer Detent Spring . . . . . . . . . . . . . . . . . . . (8448583) .55
Trigger for M16* . . . . . . . . . . . . . . . . . . . (8448592) $11.95
AR15 Disconnector . . . . . . . . . . . . . . . . (9349114-S) $5.95
Trigger for AR15 . . . . . . . . . . . . . . . . . (8448592-S) $11.95
M16 Disconnector*. . . . . . . . . . . . . . . . . . (8448635) $5.95
Trigger w. Spring for AR15 . . . . . . . . . (9349115-S) $12.95
Disconnector Spring . . . . . . . . . . . . . . . . . . . (8448594) .55
Trigger Spring . . . . . . . . . . . . . . . . . . . . . . (8448593) $1.00
AR15 Hammer w. J pin . . . . . . . . . . . (8448612-SK) $14.95
Trigger Guard Assembly . . . . . . . . . . . . . . (8448587) $5.50
M16 Hammer w. J pin* . . . . . . . . . . . . (8448612-K) $14.95
Trigger Guard Roll Pin . . . . . . . . . . . . . .(MS16562-35) .55
Hammer Pin (8448609), Trigger Pin (8448609),
Buffer - Standard . . . . . . . . . . . . . . . . . . (8448615) $15.95
orSear Pin* (8448599) each . . . . . . . . . . . . . . . . . . . $1.00
Buffer Spring - Standard. . . . . . . . . . . . . . (8448629) $5.95
Hammer Spring . . . . . . . . . . . . . . . . . . . . . (8448611) $1.00
Receiver Extension - Std. A2. . . . . . . . . . (8448581) $21.95
Magazine Catch Assembly . . . . . . . . . . . (A MC ASS) $4.95
Buffer - Telestock . . . . . . . . . . . . .(1005-914-4578) $16.95
Magazine Catch . . . . . . . . . . . . . . . . . . . . (8448638) $3.50
Buffer - Telestock - heavy weight for
Magazine Catch Button . . . . . . . . . . . . . . . (8448636) $1.50
M16M4machine gun) . . . . . . . . . . . . . (8448730-M) $26.50
Magazine Catch Spring. . . . . . . . . . . . . . . . . (8448637) .55
Buffer Spring - Telestock . . . . . . . .(1005-914-4564) $5.50
Pistol Grip A2 . . . . . . . . . . . . . . . . . . . . . (9349127) $12.95
CAR Receiver Extension - for the newer style
Pistol Grip Screw . . . . . . . . . . . . . . . . (AN501D416-18) .65
6 Position Telestocks . . . . . . . . (1005-914-2929-6) $26.50
Pistol Grip Screw Washer . . . . . . . . . . . .(MS35335-61) .45
CAR Receiver Extension - for older style
Pivot Pin (Front) . . . . . . . . . . . . . . . . . . . . (8448621) $4.20
4 Position Telestocks . . . . . . . . (1005-914-2929-P) $26.50
Pivot Pin Detent. . . . . . . . . . . . . . . . . . . . . . . (8448585) .55

www.bushmaster.com 7
Upper Receiver / Barrel Assemblies

PRECISION-CRAFTED, MODULAR 7.62x39mm Caliber Upper Assembly


DESIGN. Bushmaster upper receiver/ • Same features as the 6.8mm SPC (below left)
Bushmaster 7.62x39mm – 16" Bbl
barrel assemblies. A3 Rifle Upper Assembly . . . . . . . . .(BURA3B 16M439) $785.00
Bushmaster 7.62x39mm – 16" Bbl
• Infinite configuration possibilities – the versatile A2 Rifle Upper Assembly . . . . . . . . .(BURA2B 16M439) $685.00
Bushmaster modular AR platform
• Barreled upper receivers can be used on existing
AR rifle or carbine lower units
• All receivers feature integral brass deflectors
and hard anodized finish
5.56mm/.223 Caliber Gas Piston
• Each assembly is factory headspaced, test-fired
Upper Assembly
and ready to use
• Bushmaster Gas Piston system offers improved
• Bushmaster chrome-moly vanadium steel barrels reliability and control to the already dependable
feature hard chrome lining in both bore and AR-type rifle platform
chamber for extended barrel life • Eliminates carbon buildup, gas leaks and heat within
the upper receiver
• Optional stainless steel barrels offer exceptional • Requires less gas pressure to operate – functions with
durability and weather resistance a wider range of ammunition with reduced recoil
• Includes A3 handle on flat-top upper, or solid handle
on A2 version
• B.M.A.S. flip-up front sight and birdcage suppressor
on both
Bushmaster 5.56mm/.223 Caliber
.450 Caliber Upper Assembly A3 Gas Piston Upper Assembly . . . . . (BURA3B 16M4-GP) $1130.00
Bushmaster 5.56mm/.223 Caliber
• Add the hard-hitting punch of the 450 Bushmaster A2 Gas Piston Upper Assembly . . . . . (BURA2B 16M4-GP) $1030.00
to your Bushmaster lower receiver instantly
• AR-type gas operating system drastically reduces
recoil for excellent second shot control
• Aluminum forearm free-floats the barrel for
optimum accuracy
• Heavy barrel is hard-chrome lined in bore and chamber Varminter/Predator .223 Cal. Upper Assembly
for exceptional durability, and features 1 in 24" twist
rifling, optimized for the .450 bullet • Vented free-floating fore-end and scope risers
• Includes 5-round .450 specific magazine on a flat-top upper
• 11˚ competition muzzle crown and milled gas block
Bushmaster .450 – 20" Bbl
Rifle Upper Assembly . . . . . . . . . . . . . . .(BURVMB 20-45) $795.00 • Fluted, extra heavy, non-chrome-lined 20" barrel
Bushmaster .450 – 16" Bbl with 1 in 8" twist
Carbine Upper Assembly . . . . . . . . . . . .(BURVMB 16-45) $785.00 Bushmaster Predator Upper Assembly . . . . (PURVMB 20FPRED8)
$775.00
• Fluted, extra heavy, non-chrome-lined 24" barrel
with 1 in 9" twist
Bushmaster Varminter Upper Assembly. . . . . (PURVMB 24FVAR9)
$785.00

6.8mm SPC Caliber Upper Assembly


• 6.8mm SPC (Special Purpose Cartridge) was
specifically developed for military applications
and is now available commercially Stainless Varmint Special .223 Cal.
• Velocity averages 2600 FPS with 115-gr. Bullets Upper Assembly
• The 6.8mm SPC was specially adapted to fit the • Vented free-floating fore-end and scope risers on a
AR15-type magazine flat-top upper with milled gas block
• 16" M4-profile barrel is fitted with “Izzy” muzzle brake • Stainless steel, heavy, non-chrome-lined 24" barrel
• 26-round magazine included with 1 in 9" twist
Bushmaster 6.8mm SPC – 16" Bbl Stainless Steel Varmint Special . . . . (PURVMB 24-9SS) $785.00
A3 Rifle Upper Assembly . . . . . . . . .(BURA3B 16M468) $785.00
Bushmaster 6.8mm SPC – 16" Bbl • Stainless steel, heavy, non-chrome-lined 24" barrel
A2 Rifle Upper Assembly . . . . . . . . .(BURA2B 16M468) $685.00 with 1 in 9" twist
Varmint Special Upper without Bolt, Carrier Assembly
and Charging Handle . . . . . . . . . . . . . . (PURVM 24-9SS) $635.00
8 Orders 24 Hrs: 1.800.998.7928
16" M4 Patrolman’s
Carbine Upper Assembly
• Similar to our M4-type carbines, but with additional
barrel length (16") to make them legal for sale to
Modular Carbine Upper Assembly individual officers
• Fluted, chrome-lined, chrome moly steel 16" barrel • Forged, lightweight 7075T6 aircraft-quality aluminum
with 1 in 9" twist receivers incorporate all M16A2 design improvements
• Milled gas block, flip-up sights, 4-rail fore-end including cartridge case deflector, bolt catch assembly
with rail covers and raised ribs for protection against accidental
• Bipod/sling stud, flat-top upper receiver with bolt magazine release
carrier, charging handle and forward assist • Available in both A3 and A2 versions, with or without
bolt, carrier, and charging handle
Complete Upper Receiver . . . . . . . . . (BURVMB 16FMC) $990.00
Without Bayonet Lug or suppressor . (PURVMB 16FMC) $990.00 16" A3 Patrolman’s Carbine
Upper Assembly. . . . . . . . . . . . . . . . . . (BURA3B 16M4) $695.00
Same A3 Assembly Less Bolt,
Carrier and Charging Handle. . . . . . . . . (BURA3 16M4) $545.00
16" A2 Patrolman’s Carbine
Upper Assembly. . . . . . . . . . . . . . . . . . (BURA2B 16M4) $595.00
Same A2 Assembly Less Bolt,
Carrier and Charging Handle. . . . . . . . . (BURA2 16M4) $445.00
Bushmaster Carbon 15 .223 Caliber
Upper Assembly Bushmaster 14" Upper Assembly
• Upper and lower receivers are constructed of Carbon with “AK” Muzzle Brake
15 composite material for ultra-light weight, low A3-AK Carbine Upper Assembly . . . . . .(BURA3B 14.5AK) $705.00
maintenance and cool, reliable operation Same A3-AK Assembly Less Bolt,
Carrier and Charging Handle . . . . . . . . . (BURA3 14.5AK) $555.00
Carbon 15 Flat-Top Upper Receiver . . . . . . . (AZ15676) $605.00 A2-AK Carbine Upper Assembly . . . . . .(BURA2B 14.5AK) $605.00
Same Flat-Top Upper Assembly Less Bolt, Same A2-AK Assembly Less Bolt,
Carrier and Charging Handle. . . . . . . . . . . . . (AZ15722) $455.00 Carrier and Charging Handle . . . . . . . . . (BURA2 14.5AK) $455.00
Carbon 15 “Model 4” Upper Receiver/
Barrel Assembly . . . . . . . . . . . . . . . . . . . . . . (AZ15748) $625.00
Same Carbon 15 “Model 4” Upper Assembly Bushmaster 16" Dissipator Carbine
Less Bolt, Carrier and Charging Handle . . . . (AZ15746) $475.00 Upper Assembly
• Gas block located behind the front sight base and under
the full-length handguards to guard against heat build up
A3 Dissipator Carbine Upper Assembly . . (BURA3B 16D) $705.00
Same A3 Assembly Less Bolt, Carrier
and Charging Handle . . . . . . . . . . . . . . . . . (BURA3 16D) $555.00
A2 Dissipator Carbine Upper Assembly . . (BURA2B 16D) $605.00
Same A2 Assembly Less Bolt, Carrier
Bushmaster 14.5" M4 Upper Assembly and Charging Handle . . . . . . . . . . . . . . . . . (BURA2 16D) $455.00
M4A3 .223 Caliber Upper
Assembly . . . . . . . . . . . . . . . . . . . . (BURA3B 14.5M4 IZ) $725.00
Same Assembly Less Bolt,
Carrier and Charging Handle. . . . . . (BURA3 14.5M4 IZ) $570.00
M4A2 .223 Caliber
Upper Assembly. . . . . . . . . . . . . . . (BURA2B 14.5M4 IZ) $625.00
Same Assembly Less Bolt,
Bushmaster
ushmaster 20"/24" National Match Target
Carrier and Charging Handle. . . . . . (BURA2 14.5M4 IZ) $475.00 Upper Assembly
20" A3 w/A3 Carry Handle . . . . . . . . . . . . . (BURA3B 20) $665.00
Same Assembly Less Bolt,
Carrier and Charging Handle. . . . . . . . . . . . (BURA3 20) $515.00
16" Heavy Carbine Upper Assembly 20" A2 Solid Carry Handle . . . . . . . . . . . . . (BURA2B 20) $565.00
• 16” barrel carbines offer compact size, balanced Same Assembly Less Bolt,
swing weight, and great accuracy called for in many Carrier and Charging Handle. . . . . . . . . . . . (BURA2 20) $415.00
tactical situations 24" A3 w/A3 Carry Handle . . . . . . . . . . . . . (BURA3B 24) $675.00
Same Assembly Less Bolt,
• Standard issue for many law enforcement and Carrier and Charging Handle. . . . . . . . . . . . (BURA3 24) $525.00
military units 24" A2 Solid Carry Handle . . . . . . . . . . . . . (BURA2B 24) $575.00
• Available in both A3 and A2 versions, with or without Same Assembly Less Bolt,
bolt, carrier, and charging handle Carrier and Charging Handle. . . . . . . . . . . . (BURA2 24) $425.00
16” Heavy A3 Carbine Upper Assembly . . . (BURA3B 16) $685.00 20" A3 Stainless w/A3 Handle . . . . . . . . (BURA3B 20SS) $715.00
Same Heavy A3 Assembly Less Bolt, Same Assembly Less Bolt,
Carrier and Charging Handle . . . . . . . . . . . . (BURA3 16) $535.00 Carrier and Charging Handle. . . . . . . . . . (BURA3 20SS) $565.00
16” Heavy A2 Carbine Upper Assembly . . . (BURA2B 16) $585.00 20" A2 Stainless Solid Carry Handle . . . (BURA2B 20SS) $615.00
Same Heavy A2 Assembly Less Bolt, Same Assembly Less Bolt,
Carrier and Charging Handle . . . . . . . . . . . . (BURA2 16) $435.00 Carrier and Charging Handle. . . . . . . . . . (BURA2 20SS) $465.00

www.bushmaster.com 9
Upper Receiver / Barrel Assemblies

Bushmaster 16" Superlight Upper Assembly Barreled Rifles or Pistols, and cannot be sold to the
Superlight A3 Carbine Upper Assembly . (BURA3B 16SL) $695.00 general public without proper paperwork and per-
Same Assembly Less Bolt, Carrier mitting. For any questions regarding these Uppers,
and Charging Handle . . . . . . . . . . . . . . . . (BURA3 16SL) $545.00
Superlight A2 Carbine Upper Assembly . (BURA2B 16SL) $595.00 please consult our LE Sales Professionals.
Same Assembly Less Bolt, Carrier
and Charging Handle . . . . . . . . . . . . . . . . (BURA2 16SL) $445.00

B h
Bushmaster
t “V MMatch”
t h” 16"/20"/24"
Upper Assembly
Bushmaster 11.5" Barrel Upper Assembly
16” V Match Carbine Upper Assembly . . . . (BURVMB 16) $625.00
Same Assembly Less Bolt, Carrier A3 Carbine Upper Assembly . . . . . . . . . . . (BURA3B 11.5) $685.00
and Charging Handle . . . . . . . . . . . . . . . . . . (BURVM 16) $475.00 Same A3 Assembly Less Bolt,
20” V Match Rifle Upper Assembly . . . . . (BURVM20AH) $625.00 Carrier and Charging Handle . . . . . . . . . . . (BURA3 11.5) $535.00
Same Assembly Less Bolt, Carrier A2 Carbine Upper Assembly . . . . . . . . . . . (BURA2B 11.5) $585.00
and Charging Handle . . . . . . . . . . . . . . . .(BURVM 20AH) $475.00 Same A2 Assembly Less Bolt,
24” V Match Rifle Upper Assembly . . . . . (BURVM24AH) $635.00 Carrier and Charging Handle . . . . . . . . . . . (BURA2 11.5) $435.00
Same Assembly Less Bolt, Carrier
and Charging Handle . . . . . . . . . . . . . . . .(BURVM 24AH) $485.00 Bushmaster 14.5" Heavy Barrel Upper Assembly
Heavy A3 Carbine Upper Assembly . . . . . (BURA3B 14.5) $685.00
Same A3 Assembly Less Bolt,
Bushmaster 11.5" Barrel Upper Assembly Carrier and Charging Handle . . . . . . . . . . . (BURA3 14.5) $535.00
with 5.5" Flash Suppressor Heavy A2 Carbine Upper Assembly . . . . . (BURA2B 14.5) $585.00
A3 Carbine Assembly with Same A2 Assembly Less Bolt,
5.5" Flash Suppressor. . . . . . . . . . . . .(BURA3B 11.5/5.5) $695.00 Carrier and Charging Handle . . . . . . . . . . . (BURA2 14.5) $435.00
Same A3 Assembly Less Bolt,
Carrier and Charging Handle . . . . . . . . (BURA3 11.5/5.5) $545.00
A2 Carbine Assembly
with 5.5" Suppressor . . . . . . . . . . . . .(BURA2B 11.5/5.5) $595.00
Same A2 Assembly Less Bolt,
Carrier and Charging Handle . . . . . . . . (BURA2 11.5/5.5) $445.00

Bushmaster 14.5" M4 Barrel Upper Assembly


Upper Receiver/Barrel Assemblies M4A3 Carbine Upper Assembly . . . . . (BURA3B 14.5M4) $695.00
for Law Enforcement Only Same M4A3 Assembly Less Bolt,
Due to BATF regulations restricting barrel length, the Carrier and Charging Handle . . . . . . . . (BURA3 14.5M4) $545.00
M4A2 Carbine Upper Assembly . . . . . (BURA2B 14.5M4) $595.00
Upper Receiver/Barrel Assemblies below are legal Same M4A2 Assembly Less Bolt,
for installation only on weapons registered as Short Carrier and Charging Handle . . . . . . . . (BURA2 14.5M4) $445.00

Upper Receiver Parts

Bushmaster Complete Bolt & AR15 or M16 Bolt Carrier Assembly


Bolt Carrier Assembly with Key Staked on
AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448501-S) $137.95 • Chrome lined for smooth bolt functioning and long life
M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448501) $137.95 AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448505-S) $92.50
*NOTE: M16 Parts are NOT Legal for Sale in California. M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448505) $92.50
NOTE: M16 Bolt Carriers must be used in Title II Receivers for legality.
An FFL or Tax Stamp is required for purchase.
*M16 Parts are NOT Legal for Sale in California.

10 Orders 24 Hrs: 1.800.998.7928


Upper Receiver Parts

AR15 or M16 Bolt Carrier without Key Ejection Port Cover Assembly
• Same quality Chrome Lined Carrier, • Manganese Phosphate finished in matte grey/black
but without the Carrier Key color to match hard anodized uppers
AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448507-S) $78.95 Ejection Port Cover Assembly. . . . . . . . . . . (A EJ COV ASS) $12.95
M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448507) $78.95 *NOTE
*NOTE: M16 Parts are NOT
CAUTION: Bolt Carrier Keys must be “staked” onto the Carrier for safe Legal for Sale in California.
and proper functioning in your rifle. For information on this procedure,
or any AR15 assembly/disassembly work, we recommend the Bush-
master Video or the U.S. Government M16 Technical Manual (see
Gunsmithing Section).
*M16 Parts are NOT Legal for Sale in California. Forward Assist Assemblies –
“Teardrop” or Round Style
• Machined from 4140 ordinance steel
• Manganese Phosphate finished
Teardrop Style(9349086-TD KIT) $21.50
Complete AR15 Bolt Assembly Round Style . . (9349086 KIT) $21.50
• Includes Bolt, Extractor Assembly, Pins, Gas Rings,
Ejector Assembly Charging Handle Assembly
Complete AR15 Bolt Assembly . . . . . . . . . . . . . . (8448509) $56.00 • Precision machined from 7075T6 aircraft quality alumi-
S.
num forgings, they are hard anodize finished per U.S.
mil. spec. – with spring loaded latch installed
Charging Handle Assembly
ssembly
(8448517) $26.50
Bolt Cam Pin
• Machined of hardened steel to military specs. or better
• Manganese Phosphated for protectionon against AR15/M16 Charging Handlee
rust or corrosion Tactical Latch
Bolt Cam Pin . . . . . . . . . . . . (8448502) $4.50
50 • Sturdy steel construction –
improves on the standard charging
ing handle
Titanium Firing Pin latch and allows easy weapon charging,
harging or left handed
operation when using a scope or other optics
• Titanium is 40% lighter than steel
AR15/M16 (Tactical Latch) . . . . . . . . . . . . . .(1005-249-02) $21.95
for faster lock time, and greater accuracy
• Patented, precision machined pin improves safety by
reducing the possibility of a “slam fire” Enidine Hydraulic Buffer – Rate Reducer
AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (13-7015) $42.50
• Drop-in replacement for standard buffers - with units
designed for either rifles or carbines
• Quality alloy steels with a black oxide finish; action rod is
nickel plated for smooth operation
Chrome Steel Firing Pin • Rear “bumper”
bumper is molded black polyurethane
• A standard, mil. spec. Firing Pin for the AR15 or M16 For Carbines
ines (HB-1A)
(HB
H -1A)
A $89.95
AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448503-S) $7.50 For Rifless . . .(HB-2A)
.(HB
H -2A
2A) $99.95
M16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448503) $7.50

Bolt Carrier Rebuild Kit


Individual Parts for Upper Receivers
• Includes all parts shown to rebuild your Bolt and Carrier Bolt Cam Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448502) $4.50
AR15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(A BC REBUILD) $37.95 Bolt Carrier Key with
M16* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (M BC REBUILD) $37.95 screws/must be staked . . . . . . . . . . (AR BC KEY/SCREW) $15.95
*NOTE: M16 Parts are NOT Legal for Sale in California. Bolt Gas Rings (set of 3) . . . . . . . . . . . . . . . . . (8448511K) $3.15
WARNING: Key must be staked onto Carrier Ejector Assembly. . . . . . . . . . . . . . . . . . . . . (A EJECT ASS) $3.50
Extractor Assembly . . . . . . . . . . . . . . . . . (A EXTRAC ASS) $14.95
Extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448512) $13.95
Extractor Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448513) $1.00
Extractor Spring . . . . . . . . . . . . . . . . . . . . . . (8448755SP) $1.50
Extractor Spring Insert . . . . . . . . . . . . . . . . . . . . (8448754) $.80
Firing Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(8448503-S) $7.50
Firing Pin Retaining Pin . . . . . . . . . . . . . . . . . . (8448504) $1.00

www.bushmaster.com 11
Barrels

Bushmaster Barrels are the finest AR15/M16 type barrels made – machined from ChroMoly
Vanadium steel. We also offer 20"/24" Heavy Profile Barrels machined from Stainless Steel. Most Bushmaster
barrels are hard chrome lined (except the Stainless Steel, Varminter; Predator, DCM and 9mm) to offer corro-
sion resistance in the bore and chamber. The chrome lining is much harder than barrel steel, and effectively
doubles barrel life with proper care (exactly why the military specifies the process). Chrome’s lubricity (i.e.
“slipperiness”) reduces friction, increases velocity, aids in chambering, extraction, and speeds barrel cleaning.
Bushmaster barrels are manganese phosphate finished (except the Stainless) to guard against exterior rust or
corrosion, and to provide the same matte black, non reflective finish found on quality military type arms.

Rifling. Bushmaster barrels have 6 grooves and lands, right Barrel Fluting Option. Fluting is the process of milling 6
hand twist, 1 turn in 9" (except for DCM & Predator barrels – grooves into the barrel’s surface to increase cooling capability
1 in 8"). The 1 in 9" twist offers optimal results for the widest by increasing the barrel’s surface area. Depending upon bar-
variety of commercially available .223 / 5.56mm ammunition. rel length, fluting increases surface area by as much as 180%
- and can reduce barrel weight by as much as 20%. Because
Forged Front Sights. Our standard front sights are machined
of the extensive machining involved, order fulfillment on fluted
from steel forgings to offer superior tensile strength. We do
barrels can take longer. Ask your sales representative about
not use castings, which may crack or break if you accidentally
availability when ordering fluted barrels. To order a barrel
drop your rifle.
with fluting, simply ADD $50.00 to the price of the barrel (or
Headspacing. Barrel assemblies are headspaced at the assembly), and add an “F” to the end of the part number.
factory and are shipped ready for assembly and use. Barrel Note: Fluting is not available on some barrels, such as the A2
assemblies can be ordered with either a stepped, crowned Gov’t. Profile, the M4 Type Barrel and some Stainless Steel
muzzle or a threaded muzzle for attachment of a flash sup- Barrels. Fluting is included on Varminter and Predator Barrels
pressor or muzzle brake. BATF rulings permit permanent fac- (Predator shown below).
tory installation of muzzle brakes/suppressors on barrels if the
overall length (barrel & brake, etc.) equals at least 16". Ask
your Bushmaster representative about factory installed muzzle
brake / compensator / flash suppressor options available, or
see Muzzle Brakes/Suppressors in this catalog. “Pre-Ban”/”Post-Ban.” A Caution for our Customers:
Purchase Two Ways. In the listings below, Bushmaster When the “Assault Weapons Ban of 1994” expired on Sept.
Barrels can be purchased as “Complete Assemblies” which 13th, 2004, it became legal to again offer features on the
include all parts forward of the Upper Receiver: Handguards; AR15 type rifle such as flash suppressors and bayonet lugs
Gas Tube; Delta Ring Kit; etc. as shown here: that had been deemed illegal for those previous 10 years.
Though that Federal Legislation has expired, certain States
have retained their own versions of “Assault Weapons Ban”
Statutes. Buyers should check their own State and County
laws to determine the local legality of rifles or parts such as
barrels with these features and accessories.

Example of a Bushmaster Barrel with “Pre-Ban” features at


Bushmaster Barrels can also be purchased as “Barrel Only” right – Bayonet Lug and Birdcage Flash Suppressor. These
which includes the barrel; barrel nut; handguard cap and assemblies have part numbers that begin with “A BBL”
complete front sight assembly (with sight post and sling
swivel) as a savings to those shooters who already have
handguards. An example in ”Barrel Only” configuration is
shown here:

Example of a Bushmaster Barrel with “Post-Ban” features at


right. These do not have Bayonet Lug or Flash Suppressor.
These assemblies have part numbers that begin with “P BBL”
Note: “Barrel Only” assemblies of 16" or longer length will not
include flash suppressors - order those separately from our
Muzzle Brakes / Suppressors / Compensators Section.

12 Orders 24 Hrs: 1.800.998.7928


Barrel Assemblies (223 Rem / 5.56mm Caliber)

14.5" M4 Barrel Assembly with


Izzy Compensator 16" M4 “Patrolman’s Carbine” Barrel Only
• M4 profile Chrome-lined Barrel with pinned and welded • Less Handguards, Gas Tube, Delta Ring Kit
Izzy Compensator – is BATF legal for semi-auto rifles. and Suppressor
Total length is just over 16" With Bayonet Lug . . . . . . . . . . . . . . . . . . (A BBL-16M4) $205.00
With Bayonet Lug . . . . . . . . . . . . . (A BBL-14M4 IZFHA) $270.00 Without Bayonet Lug or Threaded Muzzle (P BBL-16M4) $205.00
Without Bayonet Lug . . . . . . . . . . . . . . (P BBL-14M4IZA) $270.00

14.5" M4 Barrel Only with Izzy Compensator 16" Heavy Carbine Barrel Assembly
With Bayonet Lug . . . . . . . . . . . . . . .(A BBL-14M4 IZFH) $240.00 • Heavy profile 16” Chrome Lined Barrel with A2
Without Bayonet Lug . . . . . . . . . . . . . . . (P BBL-14M4IZ) $240.00 Birdcage Suppressor on Threaded Muzzle – many
other Suppressors & Brake will screw on
With Bayonet Lug . . . . . . . . . . . . . . . . . . . . (A BBL-16A) $225.00
Without Bayonet Lug or Threaded Muzzle . . (P BBL-16A) $225.00

16" Heavy Carbine Barrel Only


• Less Handguards, Gas Tube, Delta Ring Kit
and Suppressor
With Bayonet Lug . . . . . . . . . . . . . . . . . . . . . (A BBL-16) $195.00
14.5" M4 Barrel Assembly with AK Muzzle Brake Without Bayonet Lug or Threaded Muzzle . . . (P BBL-16) $195.00

• Features M4 profile 14.5" Chrome Lined Barrel with AK


type Muzzle Brake permanently pinned and welded for 16" SuperLight Barrel Assembly
BATF legality (16" overall length) on semi-automatics
• The lightest 16" Chrome Lined Barrel we offer – with
With Bayonet Lug . . . . . . . . . . . . . . . (A BBL-14M4AKA) $260.00
Without Bayonet Lug . . . . . . . . . . . . . (P BBL-14M4AKA) $260.00 A2 Birdcage Suppressor on Threaded Muzzle. Tapers
from .670" to .565" under handguards, .625" under
sightbase, and to .570" at the muzzle (similar to the
14.5" M4 Barrel Only with AK Muzzle Brake original Vietnam era A1 barrel profile).
With Bayonet Lug . . . . . . . . . . . . . . . . . . (A BBL-16SLA) $235.00
• With permanent AK Brake – less Handguards, Gas Tube Without Bayonet Lug or
and Delta Ring Kit Threaded Muzzle . . . . . . . . . . . . . . . . . . . (P BBL-16SLA) $235.00
With Bayonet Lug . . . . . . . . . . . . . . . . (A BBL-14M4AK) $230.00 Note: due to diameter at muzzle, no “slip-on/pinned” type
Without Bayonet Lug . . . . . . . . . . . . . . (P BBL-14M4AK) $230.00 muzzle brakes will fit this barrel. Use only 1/2”x 28 T.p.I.
threaded accessories.

14.5" Heavy Barrel Assembly


with AK Muzzle Brake 16" SuperLight Barrel Only
• A heavy profile 14.5” Chrome Lined Barrel with AK type • Less Handguards, Gas Tube, Delta Ring Kit
Muzzle Brake permanently pinned and welded. 16" and Suppressor
overall length meets BATF regulations for semi-autos With Bayonet Lug . . . . . . . . . . . . . . . . . . . (A BBL-16SL) $205.00
With Bayonet Lug . . . . . . . . . . . . . . . . (A BBL-14.5AKA) $250.00 Without Bayonet Lug or
Without Bayonet Lug . . . . . . . . . . . . . . . . (P BBL-14AKA) $250.00 Threaded Muzzle . . . . . . . . . . . . . . . . . . . . (P BBL-16SL) $205.00

14.5" Heavy Barrel Only with AK Muzzle Brake 16" Dissipator Heavy Barrel Assembly
• With permanent AK Brake – less Handguards, Gas Tube • A 16" Chrome Lined Barrel with carbine position gas
and Delta Ring Kit block, and full length, heat shielded Handguards for
With Bayonet Lug . . . . . . . . . . . . . . . . . (A BBL-14.5AK) $220.00
excellent cooling and the full sight radius designed
Without Bayonet Lug . . . . . . . . . . . . . . . . . (P BBL-14AK) $220.00 into the A2 sight system
With Bayonet Lug . . . . . . . . . . . . . . . . . . . . (A BBL-16DA) $245.00
Without Bayonet Lug or Threaded Muzzle . (P BBL-16DA) $245.00
16" M4 “Patrolman’s Carbine” Barrel Assembly
• 16" M4 profile Chrome Lined Barrel with A2 Birdcage 16" Dissipator Heavy Barrel Only
Suppressor on Threaded Muzzle – one of our most
popular configurations • Less Handguards, Gas Tube, Delta Ring Kit
With Bayonet Lug . . . . . . . . . . . . . . . . . (A BBL-16M4A) $235.00
and Suppressor
Without Bayonet Lug or With Bayonet Lug . . . . . . . . . . . . . . . . . . . . . .(A BBL-16D) $215.00
Threaded Muzzle . . . . . . . . . . . . . . . . . . (P BBL-16M4A) $235.00 Without Bayonet Lug or Threaded Muzzle . . (P BBL-16D) $215.00

www.bushmaster.com 13
Barrel Assemblies (223 Rem / 5.56mm Caliber)

24" National Match Heavy Barrel Assembly


• 24" heavy profile Chrome Lined Barrel
With Bayonet Lug . . . . . . . . . . . . . . . . . . . . (A BBL-24A) $235.00
With Plain Muzzle & no Bayonet Lug . . . . . . (P BBL-24A) $235.00
16" Dissipator M4 Barrel Assembly
• As described above but with M4 profile for lighter
weight. Carbine position gas block, heat shielded 24" National Match Heavy Barrel Only
Rifle Handguards, full sight radius designed of the • Less Handguards, Gas Tube, Delta Ring Kit
A2 sight system and Suppressor
With Bayonet Lug . . . . . . . . . . . . . . . . (A BBL-16DM4A) $255.00 With Bayonet Lug . . . . . . . . . . . . . . . . . . . . . (A BBL-24) $205.00
Without Bayonet Lug or Without Bayonet Lug or Threaded Muzzle . . . (P BBL-24) $205.00
Threaded Muzzle . . . . . . . . . . . . . . . . . (P BBL-16DM4A) $255.00

16" Dissipator M4 Barrel Only 20" Stainless Steel Heavy Barrel Assembly
• Less Handguards, Gas Tube, Delta Ring Kit and • Per request of many High Power Competition
Suppressor (shown above) shooters, the accurate 1 in 9" twist Bushmaster
Barrel is available in brush finished, non-chrome
With Bayonet Lug . . . . . . . . . . . . . . . . . (A BBL-16DM4) $225.00 lined, 416 Stainless Steel
Without Bayonet Lug or
Threaded Muzzle . . . . . . . . . . . . . . . . . . (P BBL-16DM4) $225.00 With Bayonet Lug and Birdcage . . . . . . .(A BBL-20SSA) $275.00
Plain Muzzle & no Bayonet Lug . . . . . . . .(P BBL-20SSA) $275.00

20" Stainless Steel Heavy Barrel Only


• Less Handguards, Gas Tube, Delta Ring Kit
and Suppressor
With Bayonet Lug . . . . . . . . . . . . . . . . . . . (A BBL-20SS) $245.00
Without Bayonet Lug or Threaded Muzzle .(P BBL-20SS) $245.00

20" M16A2 Type Barrel Assembly 24" Varminter Barrel Assembly


• A Gov’t. profile Chrome Lined Barrel – light in • 24” Fluted, Non-Chrome Lined Barrel based on DCM
weight and reduced in diameter under the Competition design – button rifled 1 x 9". Features
handguards – ideal for restoring that older rifle a hybrid SAAMI Spec. chamber with longer throat or
or building a new light-weight “Leade” to accommodate 5.56mm ammunition
With Bayonet Lug & • It is 1" in diam. out to the gas block with an 11°
A2 Birdcage Suppressor . . . . . . . . . . . . . (A BBL-20A2A) $235.00 competition muzzle crown; V Match Sight Base/Gas
With Plain Muzzle & no Bayonet Lug . . . .(P BBL-20A2A) $235.00
Block and Varminter Vented Forend with Bipod/Sling
Stud, and includes a Bolt
• We recommend assembly onto your Upper Receiver
20" M16A2 Type Barrel Only by an experienced AR15 gunsmith to achieve full
With Bayonet Lug . . . . . . . . . . . . . . . . . . . (A BBL-20A2) $205.00 accuracy – shipped unassembled as shown
Without Bayonet Lug or Threaded Muzzle . (P BBL-20A2) $205.00
24" Varminter Barrel Assembly . . . . . (P BBL-24FVAR9A) $391.95

20" National Match Heavy Barrel Assembly


• A 20" heavy profile Barrel Chrome Lined in both Bore
and Chamber – with A2 Birdcage Flash Suppressor
and all parts forward of the Upper Receiver
With Bayonet Lug . . . . . . . . . . . . . . . . . . . . (A BBL-20A) $225.00
With Plain Muzzle & no Bayonet Lug . . . . . . (P BBL-20A) $225.00
24" Varminter Barrel Only
• Same as above: Barrel, Bolt and V Match Milled Gas
20" National Match Heavy Barrel Only Block – less Varminter Vented Forend and Gas Tube.
• Less Handguards, Gas Tube, Delta Ring Kit Shipped unassembled – gunsmithing recommended
and Suppressor 24" Varminter Barrel Only . . . . . . . . . . (P BBL-24FVAR9) $313.95
With Bayonet Lug . . . . . . . . . . . . . . . . . . . . . (A BBL-20) $195.00
Without Bayonet Lug or Threaded Muzzle . . . (P BBL-20) $195.00

14 Orders 24 Hrs: 1.800.998.7928


24" Stainless Varminter Barrel Assembly Bushmaster
• A highly accurate 24" Barrel as used in our Stainless Barrel Assemblies for
Varmint Special Rifle – brush finished 416 Stainless Law Enforcement ONLY
Steel, in 1 in 9" twist – complete with Vented
Aluminum Free-floater Fore-end, Sling Stud, These Law Enforcement / Military Barrel
Gas Block, Gas Tube, Bolt and Barrel Extension Assemblies are under the 16" legal minimum for
• Shipped unassembled – requires gunsmithing semi-automatic rifles, and per BATF Regulations,
24" Stainless Varminter can only be installed on weapons registered as
Barrel Assembly . . . . . . . . . . . . . . . . . . (P BBL-24A-SS) $391.95
full autos or legal short barrelled rifles.

24" Stainless Varminter Barrel Only


• Includes 24" 1 X 9” Twist Stainless Steel Barrel with 14.5" M4 Type Barrel Assembly
Gas Block, Bolt and Barrel Extension
• Chrome Lined, 1 x 9” twist Barrel with Birdcage
24" Stainless Varminter Barrel Only . . . . .(P BBL-24SS) $313.95
suppressor – machined for the addition of the M203
grenade launcher with the narrow “government”
profile under the handguards for light weight like
20" Predator Barrel Assembly the original A1 rifle barrel
14.5" M4 Type Barrel Assembly . . . . . . . (A BBL-14M4A) $235.00
• Similar to Varminter but 20” Fluted length and rifled 1
x 8" for the heavier bullets used on Predators – non-
chrome lined, with an 11° competition muzzle crown
• V Match Sight Base/Gas Block and Vented Fore-end 14.5" M4 Type Barrel Only
with Sling Stud – assembly by gunsmith recommended • Less Handguards, Gas Tube, Delta Ring Kit and
20" Predator Barrel Assembly . . . . .(P BBL-20FPRED8A) $381.95 Birdcage Flash Suppressor
14.5" M4 Barrel Only . . . . . . . . . . . . . . . . (A BBL-14M4) $205.00

20" Predator Barrel Only


• Same as above: Barrel, Bolt and V Match Milled Gas
Block – less Vented Free-Float Forend and Gas Tube.
Shipped unassembled – gunsmithing recommended
20" Predator Barrel Only . . . . . . . . . .(P BBL-20FPRED8) $303.95

Bushmaster “Short Barrelled” Assemblies


• These chrome lined barrel assemblies (either 11.5"
Competition Heavy Barrel with Factory or 14.5") with A2 Birdcage Suppressors may only be
used on registered short barrelled rifles, or full auto
Matched Bolt and Front Sight Base models for legality
• A non-chrome lined, lapped 20" Barrel, button rifled in 11.5" Barrel Assembly . . . . . . . . . . . . . . . (A BBL-11.5A) $225.00
1 x 8” twist, with 11° competition muzzle crown 11.5" Barrel Only . . . . . . . . . . . . . . . . . . . . (A BBL-11.5) $195.00
• Custom match hybrid chambered with longer throat 14.5" Heavy Barrel Assembly . . . . . . . . . (A BBL-14.5A) $225.00
("Leade") to accommodate 5.56mm ammunition 14.5" Heavy Barrel Only . . . . . . . . . . . . . . (A BBL-14.5) $195.00
(avoids the higher pressures developed when shoot- NOTE: with a permanently installed Izzy Compensator, or other 2 3/16”
ing 5.56mm ammo in a .223 caliber chamber with a suppressor, the 14.5" Heavy Barrel assembly becomes a legal 16" barrel.
shorter Leade - both calibers can be safely used) Ask your Bushmaster Salesperson for details.
• Chrome Moly Vanadium Steel with a Manganese
Phosphate finish – 1" diam. from the barrel extension
forward to the sight base step
No muzzle threading or bayonet lug . (9349054-20CGA) $313.95
With std. muzzle threading for
flash supressors . . . . . . . . . . . . .(9349054-20CGAPRB) $313.95
Note: Assembly by a Gunsmith recommended for optimum accuracy.

www.bushmaster.com 15
Barrel Parts / Compensators / Suppressors / Muzzle Brakes

Stainless Steel Replacement Barrels for Individual Barrel Parts


Carbon 15 Rifles & Pistols A. Front Sling Swivel. . . . . . . . . . . . . . . . . . . . . (8448571) $3.50
• Match Grade 416 Stainless Steel factory replacement B. Front Sling Swivel Rivet . . . . . . . . . . . . . . . . . (8448697) $.80
C. Barrel Extension . . . . . . . . . . . . . . . . . . . (9349054BE) $15.95
barrels – .223/5.56mm cal. – precision machined, D. Barrel Nut . . . . . . . . . . . . . . . . . . . . . . . . (9349054BN) $12.95
polished and 1 X 9” twist rifled, these barrels require
factory installation (special torqueing with a unique barrel
wrench – no charge) C
Carbon 15 R21 & Bushmaster Lady Rifle Barrel . . . . . . (AZ15367) D
$159.95 A
Carbon 15 R97 Rifle Barrel. . . . . . . . . . . . . . . . (AZ15368) $209.95
R97S & R97F Barrel . . . . . . . . . . . . . . . . . . . . (AZ15368T) $209.95 B
P21 Pistol Barrel . . . . . . . . . . . . . . . . . . . . . . . . (AZ15313) $139.95
P21S Pistol Barrel. . . . . . . . . . . . . . . . . . . . . . (AZ15313T) $139.95
P97 Pistol Barrel . . . . . . . . . . . . . . . . . . . . . . . . (AZ15314) $179.95
P97S Pistol Barrel. . . . . . . . . . . . . . . . . . . . . . (AZ15314T) $179.95 FSC556 Tactical Compensator
ator
• Utilizing aggressive scallop-typee
porting, the FSC556 Tactical
Gas Tubes Compensator delivers superior
• Quality materials and machining, properly bent for a gas dispersion to help stabilize the
perfect fit and flawless functioning in your rifle muzzle during periods of rapid or
full auto fire.
Rifle length Gas Tube . . . . . . . . . . . . . . . . . . . . . (8448567) $14.95
Carbine length Gas Tube . . . . . . . . . . . . . (1005-914-3504) $12.95
• .223 (5.56 NATO) compensator th thatt also
l combines
bi the
th
Gas Tube Roll Pin . . . . . . . . . . . . . . . . . . . . . .(MS16562-106) $.50 functionality of a flash hider.
• It has also been designed to accommodate suppressors
such as the Gemtech HALO and therefore comes with a
peel washer for installation.
• 2.10" in length, .865" (22mm) in diameter and is
Handguard Caps threaded 1/2x28 RH.
• Manganese Phosphate finished steel Handguard Caps in • This device has been classified as a non-flash suppress-
three different types for Standard or Heavy profile barrels ing device by the BATFE.
• NOTE: Rifle Length Handguards take the Triangular Cap / Primary Weapons Muzzle Break. . . . . . . . . . . . . . . (10008) $99.95
Standard Carbine
• Handguards take the Round Cap / M4 (Oval Profile)
Carbine Handguards take either Round Cap (B. or C.)
Bushmaster “Izzy” Flash
A. Triangular Cap (Standard Barrel) . . . . . . . . . . . (SGW-10) $6.50 Suppressor/Compensator
A. Triangular Cap (Heavy Barrel) . . . . . . . . . . . . . (9349053) $6.50
B. Round Cap (Standard Barrel) . . . . . . . . . . . . . . (SGW-09) $6.50 • One of a series designed by a Bushmaster employee
B. Round Cap (Heavy Barrel) . . . . . . . . . . . . . . . .(SGW-10F) $6.50 • Features 3 gas ports, a machine turned ribbed
C. M4 Cap (Notched for M203). . . . . . . . . . . . (SGW-10F-M) $6.50 design, and a closed bottom
NOTE: Diameter of Standard Barrel = .625” Diameter of Heavy Barrel • Functions as a Flash Suppressor, but also effectively
= .750” controls muzzle rise in rapid fire
• Machined from quality gun steel – manganese phos-
A B C phate finished
Bushmaster “Izzy” Flash
Suppressor/Compensator . . . . . . . . . . . . . . (IZ-102660-FH) $36.95

Individual Delta Ring Parts


A. Aluminum Delta Ring . . . . . . . . . . . . . . . . . . . . (8448712) $7.50
B. Handguard Weld Spring . . . . . . . . . . . . . . . . . . (8448555) $5.25
C. Handguard Snap Ring . . . . . . . . . . . . . .(MS16626-1137) $2.75 • For plain muzzle 5.56mm/.223 cal. “Post-Ban” guns.
D. Gas Tube Roll Pin . . . . . . . . . . . . . . . . . . . .(MS16562-106) $.50 Similar to above but slips over .700" diam. muzzles and is
Delta Ring Kit (includes all parts below) . . . . . (8448712K) $13.95 pinned on with a taper pin and high strength Loctite® for
extra safety.
Bushmaster “Izzy” Flash
Suppressor/Compensator . . . . . . . . . . . . . (IZ-102660-SFH) $36.95
A
Warning: Requires factory installation, or professional gunsmithing, to drill
B D and install the taper pin
C

NOTE: Bushmaster DOES NOT sell Front Sight Bases separately due to
the difficulties of drilling and retro-fitting them to barrels.
16 Orders 24 Hrs: 1.800.998.7928
Bushmaster “Izzy” Muzzle Brake A1 Bird Cage Flash Suppressor
(5.56mm/.223 cal.) • Original “Birdcage” from the Viet Nam era –
Production approved by the BATF – featuring four gas ports has six equally spaced slots all around –
and a ribbed design to improve cooling. Machined of 4140 needs no specific slot timing.
gun steel with a manganese phosphate finish – very effec- Standard 1/2" x 28 T.p.I. threading
tive in controlling muzzle rise. Slip-on/taper pinned version • For installation use the Flash Hider
for barrels with plain crowned muzzles, and threaded mod- Lock Washer (below)
el (shown left - threaded 1/2" x 28 T.p.I.) can be installed A1 BirdCage Flash Suppressor
without regard to port location (timing) and will still be . . . . . . . . . . . . . . . . . . . . . . . . . . (8448576) $6.50
effective, however most are installed with ports positioned
12 - 3 – 6 - 9 o'clock. The slip-on, pinned version requires
factory installation or professional gunsmithing to drill
and install the taper pin, and for extra safety, high strength A2 “Crush” Washer
Loctite® should be used in addition to the taper pin. (12991533B) $2.95
Threaded Izzy Brake (for 1/2" x 28 T.p.I. threaded barrels – Used at Bushmaster factory for
requires lock washer) . . . . . . . . . . . . . . . (IZ-102660-PRBF) $36.95 positioning suppressor and muzzle brake
Slip-on Izzy Brake (for plain muzzles .700" diameter – installations – for one time use only
requires gunsmithing). . . . . . . . . . . . . . . (IZ-102660-PSTF) $36.95
.308 Izzy Brake (for .308 Cal. threaded barrels (5/8" x 24) –
requires crush washer). . . . . . . . . . . . . . . . ((IZ-308-PRBFH) $36.95 A2 Peel Washer
(9349052) $3.15
A re-usable multi-layer washer for the
correct timing of suppressor or brake
installations on threaded muzzle barrels

Phantom Flash Suppressor A2 Flash Hider Lock Washer


(8448577) $.60
Precision CNC machined from quality gun steel – phos-
phate coated to military standards – with 5 equally spaced
gas slots, it eliminates most of the flash and offers excel-
lent performance with night vision equipment. Superior Russian Design AK74 Type Muzzle Brake
strength to earlier forked type, and it won't hang up on • A 5.56/.223 caliber copy of the very effective Russian
brush or clothing. 2 3/16" Overall - for threaded muzzles Military brake found standard on the AK74 Rifle
only (1/2" x 28 T.p.I.). Requires no • Screws onto threaded muzzle barrels and locks in place
specific timing, so only a Lock with an Allen head set screw (Note: a peel washer or
Washer is needed. crush washer is required for correct timing during instal-
Phantom . . . . . . . . . .(YHM-29) $36.95
5 lation). 3" overall length
• Muzzle climb is controlled by three upper gas ports –
recoil is diminished by four 45° ports directing gas at an
Phantom 2 Flash Suppressor angle from the weapon, and a contoured flat at the end of
• An improved version of the Phantom – no bottom the brake directs gas sideways
slot avoids a dust signature when firing prone • “Post-Ban” model slips over non-threaded muzzles
• Superior flash hiding in all conditions (.700” diam.) and pins in place (taper pin included)
• For standard muzzles (1/2" x 28 T.p.I.), machined For Threaded Muzzles . . . . . . . . . . . . . . . . . (MMT-0012A) $27.95
from quality gun steel with a final Fits standard threaded barrels - 1/2" x 28 T.p.I.
phosphate coating to mil. specs “Post-Ban” Model for
Phantom . . . . . (YHM-28-5C1) $36.95 Non-Threaded Muzzles . . . . . . . . . . . . . . . (MMT-0012PB) $27.95
Note: Crush Washer or Peel Washer is required Requires taper pin drilling / pinning.
for correct timing. Bushmaster factory installation is recommended.

A2 Bird Cage Flash Suppressor


• Five Slot Design (threaded 1/2" x 28 T.p.I.) without
a bottom slot to avoid dust signature when shooting
prone position
• Peel Washer or Crush Washer is required for correct
installation timing
A2 BirdCage Flash Suppressor
. . . . . . . . . . . . . . . . . . . (9349051) $6.50
Note: Even if pinned on/welded over, this
Suppressor is NOT long enough to make a
14.5" barrel legal for use on a semi-auto rifle.
www.bushmaster.com 17
Barrel Parts / Compensators / Suppressors / Muzzle Brakes

5.5" AK74 Muzzle Brake Y COMP Muzzle Brake for Threaded Muzzle
(5.56mm/.223 Carbines) Barrels
• A very functional muzzle brake for the short barrelled • These 5.56mm/.223 compensators are threaded to fit
carbine - 5.5" overall length, when permanently installed “Pre-Ban” AR barrels
on the 11.5" barrel, makes a legal 16" barrel length. • The Y Comp overall length is 3 1/4" - the Mini Y Comp
• A Peel Washer is included for “timing”(positioning of is 2 5/16" overall length
brake on muzzle). • These brakes will fit barrels with muzzles threaded
• Threaded to fit standard muzzles (1/2" x 28 T.p.I.) 1/2" x 28 T.p.I. (threads per inch)
5.5" AK74 Muzzle Brake • Order either a Crush Washer or Peel Washer
(5.56mm/.223 Carbines). . . . . . . . . . . . . . . . (MMT-0013) $31.95 for installation
Y COMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-258) $48.95
Mini Y COMP . . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-259) $31.95

Gov’t. Issue Type Blank Firing Adapters


• Allows the AR15 type gas system to function
with blank ammo
• Made of heavy steel with a finish of bright paint for Y COMP Muzzle Brake for “POST-BAN” Rifles
safety – fits over A2 birdcage flash suppressor on 16" & • CNC machined from quality gun steel – with manganese
20" barrels phosphate final finish
• Warning! Remove these adapters BEFORE • They slip over Post-Ban muzzles and are held in place
Firing Live Ammo! with a steel taper pin (drilling for taper pin is required for
Red Firing Adapters (16" & 20" barrels). . . . . . . (RAY-008) $15.95 installation)
Yellow Firing Adapters (11.5" & 14.5" barrels) . (RAY-010) $15.95 • Angled ports on each side deflect gases, upper ports
control muzzle rise
• Mini Y Comp adds 1 3/4" additional length to the Post-
Ban barrel – Y Comp adds 2 5/8"
Mini Y COMP . . . . . . . . . . . . . . . . . . . . . . . . . . (YHM-259P) $31.95
Note: Bushmaster will only warranty factory installations of these muzzle
brakes - no installation charge if purchased from Bushmaster.

“CAR 15” Flash Suppressors Threaded Muzzle Brake /


• High quality, manufactured in the U.S.A. – the six slot Flash Suppressor Adaptor
design makes these suppressors very effective on the for Bushmaster
short barrelled carbine Carbon 15 Models
• For threaded muzzles only (threaded 1/2" x 28 T.p.I.) • This Collar Adaptor allows installation of standard flash
A. CAR 15 Extended Flash Suppressor . . . . . . (MMT-500) $15.95 suppressors and compensators on original design
5.5" overall length – threaded for all Pre-Ban barrels Carbon 15
B. Shorty Look Slip-over Flash Suppressor • Machined from high quality steel and aluminum; matte
(Std Barrels .610@Muzzle) . . . . . . . . . . . . . (MMT-0019) $15.95 black finished; threaded 1/2” x 28 T.p.I. pitch for stan-
B. Shorty Look Slip-over Flash Suppressor dard .223 / 5.56 suppressors/compensators
(Hvy Barrels .720@Muzzle) . . . . . . . . . . . . . (9349SFSH) $20.95 Phantom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (AZ15133) $26.50
Internal threads allow a “slip-over” installation onto the barrel -
giving your gun a “shorty” look without sacrificing accuracy – 5" Note: Depending on the type of “timed” suppressor or compensator
overall length you want to install, you may need to order a Crush Washer (Part#
12991533B - $2.95) or a Peel Washer (Part# 9349052 - $3.15).
C. CAR 15 “Original” Flash Suppressor (1005-914-3902) $15.95
This is the original 4.5" M177 carbine design

A Shoot-Away Muzzle Cap


• Red plastic muzzle cap
B designed to slip over
AR15/M16 barrels to keep
out dirt and moisture
C • Thin plastic can be shot
through safely if necessary
Muzzle Cap . . . . . . (RCL-10) $.45

18 Orders 24 Hrs: 1.800.998.7928


Magazines / Magazine Accessories

Bushmaster Magazines
• Offer durability, value, and guaranateed fit and function in .225/5.56mm AR15 type rifles
• Boxes stamped with progressive die for tightest tolerances
• Seam welding process optimized for weld ingot, strength and Mil-Std compliance

30 Round
10 & 5 Round Bushmaster 10 Round
20 Round Straight-Body Magazine
• 10 round capacity steel mag
• Black finish and follower
• Originally designed for M17S Bullpup,
but works in all AR type rifles
10 Round Straight-Body
Magazine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (30-452) $20.95

Standard Bushmaster Magazine Springs


.223 Magaziness • Quality tempered steel springs for long memory
and positive feed
30 Round Magazine . . . . . . . . . . . . . . . . . . . . . . (8448670) $20.95
20 Round Magazine Spring . . . . . . . . . . . . . . (8448671-20) $3.95
As shipped with most Bushmaster rifles.
30 Round Magazine Spring . . . . . . . . . . . . . . . . . (8448672) $3.95
20 Round Magazine . . . . . . . . . . . . . . . . . . . (8448670-20) $20.95
Shorter, slightly curved body.
10 Round Magazine . . . . . . . . . . . . . . . . . . . (8448670-10) $20.95
5 Round Magazine . . . . . . . . . . . . . . . . . . . . . (8448670-5) $20.95
Blocked for hunting use. 30 Round Magazines
for Bushmaster
9mm Pistol & Carbine
• Either molded black polymer
Bushmaster Stainless Steel .223 Magazines composite or metal
• For heaviest Law Enforcement and Military duty • Can be disassembled
• Available in 20 and 30 round for cleaning
• Metal magazine has indicator
20 Round Stainless Steel Magazine . . . . (8448670-20-SS) $24.95
30 Round Stainless Steel Magazine . . . . . . . (8448670-SS) $24.95
holes and quantity markings
Black Polymer . . . .(AZ9-00001) $28.95
Black Steel . . . . . .(AZ9-00003) $59.95

Bushmaster 6.8mm SPC Magazine


• Specific to 6.8mm SPC Rifle
• 10 round and 5 round models have
same shell as 26 round but blocked
to indicated capacities 40 Round Magazine
• Include anti-tile followers for the AR15/M16
26 Round . . . . . . . . . . .(8448670-68) $35.95 • Matte gray finished box
10 Round . . . . . . . . (8448670-68-10) $35.95 • Mil. Spec. green follower
5 Round . . . . . . . . . . (8448670-68-5) $35.95 • Check local regulations
40 Round Magazine
for the AR15/M16 . . . (MG-0007) $24.95

NOTE: With the 2004 “Sunset” of the Federal Gun Legislation of 1994, many features of AR15 Type Rifle are again available – BUT not in all States! Some
States have their own Statutes regarding the legality of “Assault Weapons” and the High Capacity Magazines used in them. To avoid legal problems, check your
local Statutes (both State and County) before ordering High Capacity Magazines (greater than 10 round capacity). If in doubt, consult the Bushmaster Sales
Dept. (1 800 998 7928).

www.bushmaster.com 19
Magazines / Magazine Accessories

NEW 30 Round Polymer with Window Magazine Standard Magazine Rebuild Kits
(MAG210-BLK) $17.95 • Mil. Spec parts to refresh magazine
• Constant-curve internal geometry for smooth feeding 30 Rd. Mag. Rebuild Kit . . . . . . . . . . . . . . . . (8448670-30K) $6.50
• Anti-tilt follower for increased reliability 20 Rd. Mag. Rebuild Kit . . . . . . . . . . . . . . . . (8448670-20K) $6.50
• Storage/dust cover
• Stainless steel spring for
corrosion resistance Easy Loader
• Textured gripping surface • Loads all sizes of AR magazines
es
• Ambidextrous MagLevel
round indicator windows Easy Loader
(8448670 – EL223) $42.50
Easy Loader – For Stripperr Clips
5 Round Magazine (8448670-EL223SC) $42.50.50
for Bushmaster 450
(8448670-45-5) $35.95
• Heavy duty stainless steel 20 Rd. Model for use with
AR type magazine box loose ammunition.
• Blue single stack follower
• Magazine must be loaded by
Model for use with
sliding cartridge under feedlips loose Stripper Clips.
(for conventional .223/5.56mm)
BA50 Rifle & Carbine Magazine
ne
• Heavy steel box magazine
NEW Bushmaster 450 Magazine
zine • Laser engraved Bushmaster logo
• Heavy-duty stainless steel AR • Manganese phosphate finish
type magazine box with black follower and
• Single stack follower removable floorplate
5 Round . . . . . . (8448670-45-5) $35.955 BA50 Rifle & Carbine
9 Round . . . . . . (8448670-45-9) $44.955 Magazine . . . (BMG-17972A) $99.95

Green Magazine Followers


• Plastic replacements for 5.56mm/
.223 Remington magazines FN .308 Magazines
30 Round . . . . . . . . . . . (8448672) $1.95 • 7.62mm FN FAL magazines
20 Round . . . . . . . . (8448672-20) $1.95 • All steel construction
20 Round . . . . . . . . . . . (MAT-004) $29.95
10 Round . . . . .(8448670-10-308) $33.95
Enhanced Magazine Rebuild Kit for 5.56/.223 5 Round . . . . . . .(8448670-5-308) $33.95
Steel FN Magazine
30 Rd. Magazines Loader . . . . . . . . . . . . . . (MAT-001) $8.95
• Enhanced drop-in, Anti-Tilt Follower
• Chrome silicon spring (USGI design)
Enhanced Magazine Rebuild Kit . . . . . . . . . (MAG205-Gray) $11.95
Follower Only . . . . . . . . . . . . . . . . . . . . . . . . (MAG111-Gray) $1.95
MagPul Rubber Floor Plates (without Loop)
• Replacement floorplate assembly for 30 round
AR15/M16 magazines
The MagPul (Set of 3) • Rubberized bumper pad overmolded onto
• Accessory for the AR15/M16 for quick magazine change stainless steel plate
• Molded black rubber MagPul with rough exterior MagPul Rubber – w/o Loop (Set of 3) . . . . . MAG024-BLK) $21.95
texture and finger loop
MagPul (Set of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . (MP-3) $10.95

Magazine not
included
Magazine not
included

20 Orders 24 Hrs: 1.800.998.7928


MagPul Ranger Floor Plate with Loop AR15/M16 Magazine
• For 5.56mm, 30 round AR15/M16 magazines Connector (51-08-01) $25.50
• Integral loop, floorplate lock and mag. Identifier Hold twice the ammo with this side by
MagPul Ranger (Set of 3) . . . . . . . . . . . . . . (MAG020-BLK) $21.95 side magazine clamp – fits both 20 and
30 round mags. When you empty onee
magazine, drop them out, move overr to
the full one, and quickly reinsert. Made
de
Magazine not
included
of heavy steel with flat black finish.
Screw slot is sized for use with a coinn –
works with AR 180 magazines as well. ll.l

Magazines not included

Buttstock Mag Pouches


for the AR15
Command
Com Arms • Strap an extra magazine on with these
heavy duty pouches
Mag-Loader
M
Maag • Models available for ambidextrous installation
(FBS-ML556)
((F
FBS-M $12.50
on either the A2 Trapdoor Buttstock or the CAR
• A nnew AR15/M16 Magazine Telescoping Stock
Loa for
Loader • Black nylon webbing construction with
5.56mm/.233
5.5 caliber am- heavy-duty velcro flap
mu
munition
A2 Solid Buttstock Magazine Pouch . . . . . . . . . . . . .(TTMP) $31.95
Works with M16/AR15,
• Wo Telestock Magazine Pouch . . . . . . . . . . . . . . . . . . . . (TTTS) $31.95
Rug Mini-14,
Ruger
and similar magazines

The “L.U.L.A.” Mag Loaderr


(8448670-LULA) $25.50
• L.U.L.A. is a “Loader/Un-Loaderr
Accessory” that will load a 30
round Mag in about 35 seconds,ds,
and unload it in 5
• Fits all capacity 5.56mm/.223
AR15/M16 type magazines
including Thermolds and Orlitess
“L.U.L.A.” Mag Loader for 9mm . . . . . .
1.95
(24218) $31.95
Magazine Coupler
(FBS-MCUP1) $12.95
• Joins two 30 round magazines
Triple Mag Connector • Molded of black plastic with steel clamping screws
(BC-100) $26.95
• Connect 3 – 30 round
magazines together in this Magazines not
black anodized aluminum included
mount – for a 90 round
total capacity
• Clamps solidly together
with Allen head screws
Magazines
not included

NOTE: With the 2004 “Sunset” of the Federal Gun Legislation of 1994, many features of AR15 Type Rifle are again available – BUT not in all States!
Some States have their own Statutes regarding the legality of “Assault Weapons” and the High Capacity Magazines used in them. To avoid legal
problems, check your local Statutes (both State and County) before ordering High Capacity Magazines (greater than 10 round capacity). If in doubt,
consult the Bushmaster Sales Dept. (1 800 998 7928).

www.bushmaster.com 21
Magazines / Magazine Accessories

“ShotLock” Cable Lock Rigid Brass Catchers for AR-15 type Rifles
for AR15 / M16 • Hard plastic brass catchers hold a minimum
(SLC3000) $8.50 of 60 casings
• Keyed, 13" cable lock • Molded of black, nylon reinforced plastic
system will ensure AR15/M16 A2 Fixed Handle Rifles . . . . . . . . . .(EL-AR-001) $37.95
safe storage of your rifle AR15/M16 “Flat-top” Rifles
• Locks through open ejection w/o A3 Type Carry Handle . . . . . . . . . . . . . . . .(EL-AR-002) $37.95
port and magazine well AR15/M16 A3 Removable Carry Handle. . . . . .(EL-AR-003) $37.95

Competition Shell
Deflectors
• Snap onto AR15 A2 Type – others similar
A
models to keep hot
brass under control
and away from other
competitors on the Mag-Brush
firing line • Keeps your magazine well and mags clean – helps
• Allowed under keep your firing chamber clean
NRA High Power AR15, Mini 14 & 9mm UZI . . . . . . . . . . . . . . . . . . (MAG206) $6.50
Competition Rules .22; 10 mm; .38 Super . . . . . . . . . . . . . . . . . . . . . (MAG204) $6.50
B
A. A2 Fixed Carry Handle
(BD-A2) $22.95
B. A3 Flat-tops
(BD-A3-Flattop) $22.95
C. A3 Removable Handle
(BD-A3-Handle) $22.95 AR15/M16 Magazine Dust Covers
(ATI15223) $7.50
• Flexible, molded black rubber caps snap over the the
C magazine top to keep out dust and water
• Sold in Sets of Four – designed
to fit standard AR15/M16
Bag Style Brass Catcher (2693828) $42.50 metal magazines
• Black Cordura nylon bag with an internal frame
and a zippered opening on the underside Magazine
for easy emptying of shell cases not included
• 2" wide velcro strap wraps around the handguard
to hold the bag and frame in place so AK47 Magazine
that it fits flat-top Dust Covers (ATI0762) $7.50
and other AR15 • Specifically molded to fit AK magazines –
type rifles similar to AR type shown
• Sold in sets of four

Fits V Match / Universal Magazine


Varminter / Predator
Tool (UMT) $6.50
• Pocket sized tool that will load or
unload any magazine on the market today
• Molded of heavy black plastic – includes a
convenient brass key chain
Three Magazine Pouch
• Sewn of Cordura nylon, with
a silent clasp, suspension Stripper Clip Stripper Clip
(below) Guides (right)
ring, and two belt clips (EGSS-01) $.35 (ea.) (EGSS-02) $1.00 (ea.)
Black . . . . . . . . (6451) $16.95 (ea.) $.30 (ea.) (quantities
Stamped steel with
Olive Drab . . . . (6452) $16.95 (ea.) of 25 or more)
phosphate finish

Magazines not included

22 Orders 24 Hrs: 1.800.998.7928


Slings & Bipods

Spec-Ops Mamba Combat Sling for Telestocked Government Issue Sling


M4 & other Carbines (100240101) $39.95 (12624561) $5.50
• First sling designed for full contact engagement • A 1-1/4" wide black nylon web
• Left or right handed shooters sling – 54" long, with two
• Offers fast and easy transitions with a “tensioned black metal buckles
triangle” design to eliminate interference with
body-mounted load bearing equipment
• It’s tubular web construction is super strong,
and twist and tangle-free
• Compatible with SOPMOD components, the Mamba’s Tactical “Silent Sling”
static-side “traverse” strap prevents sling from tangling for Carbon 15 Rifles and Others
in weapons mounted sighting or lighting systems (AZ723) $41.95
• Does not use any metal snap clips, velcro or other • As supplied on the Carbon 15 97S Rifle, this
noise-making hardware quality tactical sling will fit any other Bushmaster
Carbon 15 Rifle
• Adaptable to various other firearm
• This sling offers multiple carry modes, and is sewn
of durable, black ballistic nylon with easy Velcro
strap attachment mechanisms

Mamba Combat Sling for Fixed Stock Rifles


(100240201) $39.95
• Designed with a custom positioning “Speed-Lok” feature
• Spec-Ops Mamba Slings allow the wearer to balance
and position the weapon according to situational
requirements 1 1/4" Wide Padded Rifle Sling
• Unique stretch section built into the sling allows the (AS-60) $13.95
user to strike an opponent with the weapon’s muzzle • For AR15/M16, or a variety of other rifles
(”barrel thump”) while still keeping the weapon slung • Black webbing with a comfortable shoulder pad,
and in ready position and two black metal buckles
• Adjusting buckles allow “pre-setting” the sling for
operator’s body size
Also available:
The Spec-Ops Universal Mamba Sling . . . . . . (100240501) $49.95
For ambidextrous mounting to either carbines or full stocked rifles –
with all the Spec-Ops Mamba features described above.
The Master Blaster Combat Sling. . . . . . . . . . (100300101) $29.95
Designed for combat shotguns and tactical rifles. Features two
adjustments for quick transitions & body sizing, and quality
tubular web construction.

Button Sling Double Bungee “Throw & Go”


Single Point Tactical Carbine Sling (TGPT) $39.95
• High quality black nylon tubing with internal
bungee cords make this sling uniquely adaptable
to Tactical situations
• The sling attaches to the rifle with the “Button”
endplate shown on next page, and offers length
Turner Saddlery Leather Competition Sling adjustment, comfort and instant readiness
(TS-NMPTRS) $74.50
• National Match Police Tactical Rifle Sling is
premium quality, black, 11 oz. strap leather
• 54" in length with numbered holes
• Fitted with Mil Spec Parkerized steel hardware and
copper rivets, andd the short
strap is stitched with
bonded nylon thread
ead
to resist rot

www.bushmaster.com 23
Slings & Bipods

Button Sling Carbine Endplate Bushmaster Modular Accessory System


• This phosphated finished steel endplate replaces the Rail Sling Mount (YHM-9485S) $24.50
telestock locking collar on your carbine to provide a solid • Attach a sling to any accessory rail (Picatinny or
mounting point for the one point sling at left Weaver type) with this B.M.A.S. Rail Sling Mount
• Heavy duty tab slips onto the button for a secure mount • Clamps onto a rail system or forend rail
Right handed shooter . . . . . . . . . . . . . . . . . . . . . (M4-M16) $19.95 segment, and locks down with one
Left handed shooter . . . . . . . . . . . . . . . . . . . . . .(M4L-M16) $19.95 button head Allen screw
• Includes the swiveling sling stud
Button Sling Endplate in position on below mounted on an anodized
carbine for right handedd carry aluminum base

Quick Detach Sling Swivels


(KNS-4) $12.95 (pair)
• These 1 1/4" Loop Quick Detach Sling Swivels
are heavy steel with a phosphate finish and
a screw locking knob to ensure that the
sling won’t work loose from the rifle.
• Fits any firearms with standard sling
swivel studs installed
Quake Industries “Claw” Non-Slip Sling
(51000-0) $38.95
• High quality sling sewn with 1" wide black webbing Bushmaster Modular Accessory Syst System
• Includes a flexible, molded rubber shoulder pad that Swivel Sling Stud (YHM-9469) $4.75
offers silence, comfort and won't slip • Fits our Four-Rail Forearms and other B.M.A.S.
• Universal design sling – adaptable to many different rifle accessories to provide a sling attachment point
that won’t deflect the barrel when pulled tight
• Rotates 360° – machined steel with black
phosphate finish – threaded 5/16 x 32
• Use with any standard Q.D. sling loop

Bushmaster Sling/Bipod Stud


(B-0807) $5.95
• Mounts to any standard, Quick
Equipment Mount for Rails Detach type sling swivel
(FBS-BP1) $31.99 • 3/8" shaft is threaded 10/32
• Mounts to any Picatinny or Weaver type rail with a push • Use a #21 drill bit before tapping
button lock mechanism
• Molded of high density black polymer with a standard
stud for sling or bipod mounting
Steel Side-Sling Adapter
(12598617K) $24.95
• Allows mounting a
sling to the side of
the barrel for easier
ready position carry
• Machined from gun
steel, it is adaptable to
both standard (.625" diam.)
Bushmaster Modular Accessory and heavy barrels (.750" diam.)
System Bipod Adapter (YHM-638) $31.95
• This attachment will adapt Harris (or other) bipods
to the B.M.A.S. A2 Buttstock Sling Stud
• Triple Mount or other accessory rail segments (KNS-5) $14.95
• Machined from Aircraft Aluminum – then black
anodized to a mil. spec. finish – with steel bipod stud • This phosphate finished steel stud
• Mounts to any Picatinny or Weaver type rail replaces the old rear sling loop on
standard A2 solid buttstocks
• Accepts any standard Quick Detach
type sling swivel
24 Orders 24 Hrs: 1.800.998.7928
NEW Sling Stud for MagPul PRS Bushmaster Modular
(10011) $5.00 (pair) Accessories System Front Sight
• Replaces one of the four Socket Button Head Sling Mount (YHM-9468) $31.95
Cap Screws found on the Magpul Precision • This Bushmaster Modular Accessories
Rifle Stock (PRS) with a sling stud System Sling Mount installs easily (with
• Threaded straps can be reversed giving three Allen Screws) to position the sling
8 choices for stud placement along the side of the front sight
• Each BT14 comes with a black for a comfortable carry
polymer spacer • Includes a swiveling stud
which accepts standard quick
detach sling mounts

Ambi Sling Connector


(10002) $29.99
• Ring is designed to hold weapon flat against body – Bushmaster Modular
your rifle will hang naturally at the ready Accessories System Shown installed
• Fits all AR / M4 collapsible stocks and separately.
Tactical Sling Adapter
• Solid, all steel construction
(1005-914-2942-T) $14.95
• 100% Made in USA
• Lifetime warranty • A Tactical Sling Adapter made for attaching
various types of slings
• Allows mounting either web type slings or
those that have “lobster claw” type clips
• Phosphate finished steel adapter plate replaces
your telestock receiver end plate, and allows
Sling Mount Loops ambi sling mounting on
• For vertical carry mounting, the front loop mounts the primary, or offside
onto the sight assembly shoulder position for a
• For buttstock application, attach the loop onto the comfortable “tactical”
stock’s rear sling loop carry
• Phosphate finished, heavy spring steel wire Shown installed
Front & Rear Set - 2 Loops . . . . . . . . . . . . . . . . . (2698877K) $8.50 and separately.
or, Sold Individually . . . . . . . . . . . . . . . . . . .(2698877) $5.50 (ea.)

Harris Ultralight Bipods


• Versatile, sturdy, light, and fast
• Folding legs w/completely adjustable
spring-return extensions
• Sling swivel attaches to the clamp
• Quality manufactured with heat treated steel and
hard alloys - all black anodized finish
• Swivel 45° for instant leveling on uneven ground
• Leg Length: 13" Extended/9"Retracted. Harris Model L
will mount directly onto Varminters & Predator
Bushmaster Modular Accessories • V Match rifles require installation of Sling Bipod Stud
System Front Sling Mount & Accessory Rail • Ribbed AR Handguards
(YHM-9574) $78.50 require the HE-001 adaptor
• Designed to clamp into the standard AR Front Sight, • For mounting to accessory
this mount combines a sling stud and Picatinny rail rails, use the Command Arms
section for attachment of flashlight or laser accessories FBS-BP1 or our Bushmaster
• Two discs fit into the sight, lock together with Allen Modular Accessories System
head screws, then the rail screws into those and is Aluminum Bipod Adapter
oriented by means of the large knurled nut Harris Model L – for XM15/
• Anodized aluminum with steel screws and stud AR15/M16 & others
. . . . . . .(HE-002) $118.95
Harris Bipod Adapter for
Shown installed AR15 Handguards
and separately. . . . . . .(HE-001) $14.95

www.bushmaster.com 25
Pistol Grips & Buttstocks

A2 Standard Pistol Grip Bushmaster Modular Accessories


(9349127) $12.95 System Folding Foregrip (YHM-9640) $79.50
• Standard A2 hollow pistol grip • The mounting base incorporates a push-button mechanism
of molded black plastic with for fast deployment
raised finger ridges, checkered • Base mounts to any
panels and a ribbed backstrap Picatinny rail with one
Pistol Grip Screw . . . . .(AN501D416-18) $.65 Allen head screw – can
Pistol Grip Washer . . . . . (MS35335-61) $.45 be mounted to fold the grip
forward or backward according
to preference or other accessory usage
Pistol Grip Plug (SCH-5) $4.50
• Turns any standard A2 pistol grip
into a “stowaway” grip for storage The “Gapper” (SCH4085)
5) $3.95
of small items • Fills void between the pistol
t l grip
i andd th
the
• Molded of black rubber, snug friction back of the trigger
fit holds it inside the grip cavity guard – molded of
flexible black
polyurethane
Hogue AR15/M16 Pistol Grip
• Easy, one screw installation on
your AR15/M16
Pistol Grip only . . . . . . . . .(15000) $31.95

AR15/M16 Tactical Grip


(ARG01) $63.95
• Adjustable palm swell style grip
Tactical Stow Grip adapts easily to different sized hands
(FBS-G27) $25.95 and puts pressure in the palm of
• “G27” type storage grip is the hand to allow a deliberate and
molded from a synthetic calculated trigger pull
material proven to minimize • Molded of heavy black plastic
slippage when wet
Bushmaster Modular
Accessories System Forward
Pistol Grip Assembly
ErgoGrip Tactical
(9349127-FWDGRP) $42.50
Deluxe Pistol Grip
(SCH4045) $42.00 • Combines a rail mount clamp with
a standard AR A2 composite plastic
• Ambidextrous grip that mounts pistol grip that allows easy mounting
universally to any AR15/M16 onto the Picatinny rail section of
rifle lower receiver various rail accessory system
• Injection molded with an
overmolded rubber Sure Grip™
textured finish, and offers a raised rear extension for
improved hand web support and weapon control AR15/M16A2
Stowaway Grip
(56PT87SPG2) $13.95
Bushmaster Modular • This M16A2 configuration grip – with a
Accessories System Solid serrated backstrap and finger groove –
Vertical Forearm Grip features a trap door storage compartment
(YHM-9400) $36.95 for holding cleaning gear or small parts
• Heavy duty “broomstick” style
foregrip slides onto Picatinny rail
forends and rail accessory systems
• Adds stability to your weapon’s
handling, and helps control muzzle ErgoGrip Vertical Forend
rise in rapid fire (ARG-FWD) $52.95
• Mounts to all Picatinny rail and
Weaver base type rails
26 Orders 24 Hrs: 1.800.998.7928
Command Arms Ergonomic Vertical Foregrip Command Arms CBS
(FBS-AVG) $19.99 6 Position Collapsible Stock
• An ergonomically designed (FBS-CBS) $60.49
tactical vertical grip • Tested and recommended by the NTOA
• Improves performance and (National Tactical Officers Association)
reaction time • Six Position Collapsible Stock with a rubber,
• Fits the hand well with finger grooves,ves, non-slip recoil pad
and includes a plugged storage • Features a Picatinny Rail Block and a Storage
compartment for small parts/batteries eries Compartment for CR123 batteries (4 total)
ny
• Weight is .34 lbs., it fits all Picatinny or other small items
Rails, and carries a Command Arms ms • Rail Block and Compartment are ambidextrous in
Lifetime Warranty design and easily switched from side to side
• Two metal inserts (the round cutouts front and rear)
allow for the addition of optional Q.D. sling adaptors
• Fits commercial size tubes
Command Arms Flashlight
Grip Adapter (FBS-FGA) $69.99
• Multi-tasking foregrip combines a flashlight mount
for 1" diam. lights, and vertical grip all in one – as
well as including an accessory rail section that
serves as a laser mounting point, and a battery or
small parts storage compartment within the grip
• Thumb activated push button on the back of the
grip operates the flashlight’s
hlight s on/off switch
ing
and allows for signaling
• Removable side plates es on
the grip utilize a rubber
er
surface to enable
installation of a
pressure switch Command Arms CBS Stock
underneath the with Extension Tube, Spring & Buffer
side plate (FBS-CBSK) $122.95
• Fits all Picatinny Rails,
s, clamps on with
thumbnuts for a “no tools” installation, and • All parts needed for a complete swap-over from a
has Command Arms’’ Lifetime Warranty standard A2 stocked rifle to this new Command Arms
CBS 6 Position Telestock configuration

Mission Adaptable (MIAD) AR15/M16 Command Arms ACP Adjustable Cheek Piece
Grip Full Kit (MAG050-BLK) $35.95 (FBS-ACP) $29.99
• Grip kit has removable / replaceable front and rear • Adjustable Cheek Piece for the CBS Telestock
panels for a custom fit over multiple hand sizes • Slides onto the Picatinny Rail Block, and offers height
• Features improved ergonomics and positive anti-slip adjustment for eye alignment with optics, and horizontal
texture on both sides and rear backstrap adjustment along the tele’s side rail
• Removable inner core that allows for storage (3 round • Molded from reinforced polymer, this cheekpiece is
plug included) Custom storage of batteries (waterproof) ambidextrous with mounting options for either left or
or bolt/firing pin is available with optional cores right handed shooter
• Kit includes 3 size backstraps (S,M,L); 4 frontstraps • Command Arms Lifetime Warranty
including integrated enhanced trigger guard, 3 round
core plug, and installation hardware

www.bushmaster.com 27
Pistol Grips & Buttstocks

Command Arms Saddle for Bushmaster Camouflage Finished Pistol Grip/


Telestocks (FBS-SST1) $21.99 Buttstock/Handguard Sets
• Fits new style BFI Telestocks and others These 3 Piece Sets – or individual parts – can now be
• Improves cheek support and head stability while aiming added as accessory items to your rifle or carbine. High
• Eliminates head movement and fatig
fatigue quality, tank dipped parts in either Desert Camo or Real-
• Waterproof storage compartments
partments for
fo cleaning gear, Tree® Hardwoods Camouflage Pattern
ries
or six CR123 batteries
• Sling loops are incorporated into the m
mounting blocks Desert Camo
me Warranty from Command Arms
• Lifetime Pistol Grip . . . . . . . . . . . . . . . . . . . . . . . . (9349127-DC) $19.95
Trapdoor Buttstock . . . . . . . . . . . . . . . . . .(9349119-DC) $54.95
CAR Handguards . . . . . . . . . . . . . . (1005-914-4572-DC) $29.95
3 PIECE SET . . . . . . . . . . . . . . . . . . . . . . (CAMO-DC-CAR) $99.95

RealTree® Hardwoods Camo


Rifle Length Handguards . . . . . . . . . . . . . . . (9349059-C) $39.95
Bushmaster
aster Stubby Stock with Carbine Buffer A2 Solid Buttstock . . . . . . . . . . . . . . . . . . . . (9349119-C) $54.95
and Action Spring (9349119-S-KIT) $69.50 Standard Pistol Grip . . . . . . . . . . . . . . . . . . (9349127-C) $19.95
• This version of the standard A2 buttstock (3.25" shorter) CAR Handguards . . . . . . . . . . . . . . . . (1005-914-4572C) $29.95
makes the AR type rifle easy to carry in confined quarters CAR Furniture SET . . . . . . . . . . . . . . . . . (CAMO-RT-CAR) $99.95
- not much longer than a compressed telestock, but just RIFLE Furniture 3 PIECE SET . . . . . . . (CAMO-RT-RIFLE)
( ) $106.95
long enough to be legal length with 16" barrelled guns
and sized well for women and younger shooters.
• Comes complete with carbine length Buffer and Spring
• Standard rear sling loop is mounted, and the solid
buttplate (no trapdoor storage compartment) is smooth
and comfortable on the shoulder
• Length 7.25 inches / Weight 14.6 oz.
Magpul PRS Precision Rifle Stock
Complete (MAG300-BLK) $255.00
Bushmaster Lowerr • The Generation II Precision Rifle Stock (PRS™) is
with Stubby Stock designed to be a field precision stock
(A LOW STUBBY) $340.00
0 • Adjustable for both height and length of pull, at it's
• An FFL is required for
or purchase – shortest LOP it is about the length of an A1 type Stock
or see your FFL Dealer
ler and extends about 1/2” longer than an A2 stock
• Features a billet machined buttplate with a rubber
butt-pad, mil-spec phosphated steel shafts, and
Complete A2 Trapdoor Buttstock Assembly aluminum ball detent knobs
(A2 STK COMP) $79.95 • The PRS easily replaces the standard AR15/M16 stock
and uses stock A1/A2 rifle length receiver extension
• The newer A2 design is 5/8" longer than original
without the A2 spacer – comes with all mounting
A1 for greater shooting comfort and improved trigger
hardware and two ambidextrous 1.25” sling loops
pull length of 13.5"
that can be positioned front or rear
• Trapdoor storage space in the buttstock provides
• Weight: 1.855 pounds / Retracted
room for spare parts or an Otis Buttstock Stowage
• Length: 10.45" / Extended Length: 11.45" / Height
Cleaning Kit (see Gunsmithing Section)
Adjustment: 0.75" / Rubber Butt-Pad Thickness: 0.25"
• Includes Buttstock w/Trapdoor Buttplate, Sling Loop,
Buffer, Buffer Tube, Buffer Spring, Spacer and
Vented Buttplate Screw

PRS Stock – left side


showing Std. Buttpad
and sling loop
PRS Stock with
Slip-on LimbSaver Recoil Pad
mounted (sold separately)

28 Orders 24 Hrs: 1.800.998.7928


LimbSaver Slip-on Recoil Pad Six Position Fiberite Telescoping
(Limbsaver-M) $36.99 Stock Assembly (1005-087-8988-PK) $106.95
• A slip-on recoil pad that offers easy installation, recoil- • Our standard telestock – a heavy duty design
reducing technology and molding from proprietary incorporating a six position latch assembly
NAVCOM™ Noise and Vibration Control Material • Ribbed body offers extra strength
• Displace shock on a 0 to 2500 Hz • A six position receiver extension, machined from
spectrum and ensures maximum solid aluminum extrusion
shock relief with excellent protection • Lower lip face acts as a timing edge to insure the
for the shooter buffer retainer is held correctly and the extension
• Fits stocks from 4 13/16" height x is positioned correctly
1 5/8" thickness up to 5 1/8" x 1 3/4",
and the 1" thick pad will add 1" length
to trigger pull

Hook Style Buttstock for AR15/M16


(16-01-02) $44.95
• A molded fiberglass polymer stock offering the eye relief
of the newer M16A2 type with 1" additional length of pull
• The “hook” gives added stability to sandbag rest when
shooting with left hand across the body and into the hook Complete Fixed Position Tele-Style
• Uses the standard issue buttplate but offers almost
double the storage – easily replaces the standard stock
Stock Assembly (1005-087-8988PEK) $106.95
• Includes Carbine Length Receiver Extension,
Buffer and Spring

Original Style Fiberite TeleStock


Assembly (ALEO-001K) $106.95
• Original style fiberite telestock body with
a four position telescoping aluminum
extrusion extension tube
Complete Hook Style Buttstock Assembly • Original design metal telestock buffer with
(AR STK ASSY CHO) $95.50 cylindrical weights, and the carbine length
• Includes Stock, Trapdoor Buttplate Assembly, Buffer, buffer spring are included
Buffer Tube, Buffer Spring, Spacer and Screw
• The newer A2 design is 5/8" longer than original A1
for greater shooting comfort and improved trigger
pull length of 13.5"

Delta Style Stock Cheekpiece


(6200) $74.50
• A quality accessory for your A2 buttstock –
designed to improve accuracy by eliminating
parallax problems
• It shoulders easily and provides the proper cheek-weld Skeleton Stock
for telescopic sight use Extended Recoil Pad
• Installs with no alteration to original butt cap or sling (SKEL-1IN-BUTTPAD) $13.95
loop, and is designed specifically for the new style A2 • Extra thick, molded rubber Recoil Pad
stock (can be modified to fit the A1) fits all the Skeleton Stocks including
the Shorty Model
• 1 inch in thickness, and 3.2 oz.
in weight
• Installs easily in place of existing
pad – screws are included

www.bushmaster.com 29
Pistol Grips & Buttstocks

The “Skeleton” Stock Replacement Foam Sleeves


(SKELETON STOCK) $112.95 for Skeleton Stocks
• Radically different stock design for all AR15 type Standard Stock . . . . . . . . . . . . . . . . . . . (SKEL-FOAM-OT-8.2) $4.50
rifles offers a comfortable neoprene foam sleeve Shorty Skeleton Stock . . . . . . . . . . . . . (SKEL-FOAM-OT-5.5) $3.95
and a skeleton frame NOTE: These sleeves install easier with WD40.
• A comfortable rubber buttplate is included, as is a
swiveling sling loop that can be mounted forward
left, or right, or on the bottom of the buttplate NEW R-15 Stock
• Length 10.5" / Weight 14.03 oz. • Features Advantage® Max1™ camouflage pattern
*This does not include buffer tube, buffer or spring – • Heavy duty design incorporating a six position
(use already existing parts or buy the kit below) latch assembly
• Ribbed body offers extra strength
• Six position receiver extension, machined from
solid aluminum extrusion
• Lower lip face acts as a timing edge to insure
buffer retainer is held correctly and the extension
is positioned correctly
Standard Stock . . . . . . . . . . . . . . . . . . . (1005-087-8988) $139.95

Shorty Skeleton Stock Kit


including CAR Buffer and Spring
(SKEL-SH-STK-KIT) $148.95
• Similar to the original Skeleton Stock above, but
with an overall length of 7 3/4" - weight of 12.8 oz.
• The neoprene sleeve around the buffer tube offers
a comfortable cheek weld NEW CTR Telestock (MAG311-BLK) $97.00
• A 1/2" rubber recoil pad, a sling swivel (mounts • Mounts on Commercial Carbine Receiver
either left or right side, or on buttplate base), a Extension tube (not included)
short Buffer Tube, a CAR Buffer and Spring, and • Premium chrome-silicon spring provides
all necessary screws are included to swap over positive locking and long service life
from any AR type rifle or carbine • Supplemental friction lock eliminates accuracy
Shorty Skeleton Stock without robbing wobble*
those parts. . . . . . . . . . . . . . . . . . . . . . . . (SKEL-SH-STK) $134.95 • Sloping cheek weld combines a slim profile
with user comfort
• Shielded release latch prevents snagging and
accidental operation
• Side mounting slots accept optional cheek
risers for NON-AR15 / M16 applications
• Compatible with Single-Point® sling mounts
• Rear – Push-button QD sling mounts
accommodate up to 1.5" swivels
(Ambidextrous)
• Rear / Bottom - 1.25"
Skeleton Stock Kit for Sling loops
Changeover from a Tele-stock • Toe – Lanyard hole
(SKELETON-STOCK-K) $154.95 for custom
• Includes Skeleton Stock with Buttpad and Hardware para-cord rigs
(as above) plus standard buffer tube, standard buffer • Black in color
and spring
Carbon 15 Youth Sized Buttstock
(AZ15279) $26.50
• Perfectly sized for the younger shooter, or smaller
woman, this Carbon 15 molded buttstock easily
replaces the standard stock on Bushmaster Carbon 15
• Will not fit C15
Pistol receivers
• It’s 8 1/4" overall
length yields a
trigger pull length
of 11 1/4"
30 Orders 24 Hrs: 1.800.998.7928
Cheekpiece for Bushmaster Extended Buttplate
Six Position Telestock (7200) $37.50 for AR15/M16 (16-09-02) $24.50
• Designed to offer excellent cheekweld and appropriate • Glass-filled, black plastic composite buttplate
head position for scope and optic use, it fits the newer • Adds 1 1/4" length to the standard issue AR15/M16 buttstock
Bushmaster Six Position “ribbed body” telestocks • Does block access to the buttplate trapdoor
• Also fits on the Stubby Stock
• Snaps securely onto the telestock body
• Includes a watertight small parts storage compartment
in the upper portion of the cheekpiece, sealed with a
rubber o-ring screw-in plug

Individual A2 Solid Buttstock Parts


1. A2 Solid Buttstock. . . . . . . . . . . . . . . . . . . . . . (9349119) $37.50
2. Trapdoor Buttplate Assembly A2 . . . . . . . . . . (9381380) $21.50
3. Buffer – Standard . . . . . . . . . . . . . . . . . . . . . . (8448615) $15.95
4. Stock Spacer & Screw . . . . . . . . . (A2 STK SPAC/SCRW) $6.50
5. A2 Buttplate Screw . . . . . . . . . . . . . . . . . . . . . . (9349128) $3.50
6. A1 Buttplate Screw . . . . . . . . . . . . . . . . . . . . . . (8448627) $3.50
7. Receiver Extension - Std. A2. . . . . . . . . . . . . . (8448581) $21.95
Cheekpiece for older Fiberite TeleStocks 8. Buffer Spring (Standard) . . . . . . . . . . . . . . . . . (8448629) $5.95
(7000) $37.50
• This telestock cheekpiece allows the use of scope, 1 2 3
laser, or night vision devices with comfort
• Molded of tough black plastic, it snaps on to most 8
older style fiberite telestocks with a secure pressure 4
9349119:
fit and features a built-in watertight small parts Includes Stock,
storage compartment that is sealed with an o-ring Trapdoor Buttplate 5 6 7
screw-in plug at top rear of the unit) & Sling Loop
• Helps take all the “rattle” out of fiberite telestocks
Note: For use on Fiberite Telestocks – will only fit
the original type telestocks
Individual Telestock Parts
1. Buffer – Telestock . . . . . . . . . . . . . . . . (1005-914-4578) $16.95
2. Buffer – Telestock . . . . . . . . . . . . . . . . . . . .(8448730-M) $26.50
(Heavy weight for the M16M4 machine gun)
3. Buffer Spring (Telestock) . . . . . . . . . . . (1005-914-4564) $5.50
4. CAR Receiver Extension . . . . . . . . . .(1005-914-2929-6) $26.50
(for the newer style 6 Position Telestocks)
5. Telestock Locking Nut . . . . . . . . . . . . . . (5310-917-1154) $7.50
(for the newer style 6 Position Telestocks)
6. CAR Receiver Extension . . . . . . . . . .(1005-914-2929-P) $26.50
(for old style 4 Position Telestocks)
7. Telestock Locking Nut . . . . . . . . . . . . . . (5310-917-1153) $7.50
Rubber TeleStock Butt Pads (for old style 4 Position Telestocks)
• These molded black rubber pads securely fit the 8. Telestock Receiver Plate . . . . . . . . . . . (1005-914-2942) $7.50
buttplate of the TeleStock to offer recoil reducing 9. Telestock Slide Locking Pin . . . . . . . . . (1005-914-3229) $6.50
comfort and positive, non-slip shoulderinge 10. Telestock Lock Pin Spring. . . . . . . . . . (1005-916-9178) $1.00
A. “Ribbed” Style TeleStocks . . . . . . . . . . . . . . . (2698828) $20.50 11. Telestock Latch . . . . . . . . . . . . . . . . . (1005-087-8987P) $7.50
B. Older style TeleStock . . . . . . . . . . . . . . . . . . . (2698827) $16.95 12. Telestock Lock Pin Nut . . . . . . . . . . . . (5310-917-1215) $4.50
Also fits the Carbon 15 Rifles with the original design buttstock – 13. Telestock Lock Pin Roll Pin. . . . . . . . . . . (MS16562-106) $.50
can be modified to fit new reinforced Carbon 15 Buttstock

1 3
A B
2 4,6 5,7
8 Telestock
Bodies are
NOT available
9 10 11 12 13
separately.

www.bushmaster.com 31
Handguards & Accessories

Bushmaster Modular Accessory System Bushmaster Modular Accessory


Four Rail Split Handguards System Integral Flat-top Forend
• The two piece design of these B.M.A.S. Handguard Sets • Designed to fit the A3 type “flat-top” rifles or carbines,
allows quick and easy installation of a Picatinny Four Rail and mounts using a replacement barrel nut (included -
Accessory System on most AR type Rifles* major disassembly of rifle required)
• Machined of quality aircraft aluminum, they snap right in • System free-floats the barrel, and features a sling mount-
place of standard carbine or rifle handguards, and offer ing plate with swivel stud. This strong and light weight
four full length Picatinny rails for the flashlight/laser sight forend system is machined from aircraft aluminum,
accessories of your choice finished in matte black hard anodized, and vented to keep
• Rails are positioned at 12 - 3 - 6 – 9 o'clock barrel heat to a minimum.
• Top handguard can be used in conjunction with an M203 • Our BMAS Low Profile Rear Flip-up Sight (YHM-9680) is
Grenade Launcher designed to fit behind this unit on the A3 Upper.
• Vented to keep your barrel cool, finished in mil. spec. • The P-4 Carbine length model will fit on our A3 Gas
matte black anodize to eliminate glare and protect Piston Carbine as it offers enough clearance over the gas
against corrosion piston housing
For Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-9670) $191.50 For Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (P-12) $292.95
For Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-9803) $212.95 For Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (P-4) $250.00
*Note: These sets will not fit our DCM, or Gas Piston Carbine.

Bushmaster Modular Accessory System


Bushmaster Modular Accessory System Handguard Rails
Four-Rail Free Floater Forearms • Add an accessory mounting point to any standard
• Four Picatinny rails are machined into these free floating rifle or carbine handguard with these Picatinny
forends to offer your AR type firearm unlimited mounting configuration rails
options for sights, scopes, grips, lights, and lasers • Mounting requires removal of handguard and inner
• Venting slots all around aid in barrel cooling, and rail shield – they are screwed to the handguard through
front edges are drilled and tapped to accept the B.M.A.S. the existing vent holes
Swivel Sling Stud • Car Length Rail will fit on a Rifle length handguard
• The rifle model fits 20" and longer barrels; the carbine • Due to possibility of movement, we do not recommend
version is designed for 16" barrels installation of optics or lasers on these rails
• Assemblies include forearm, barrel nut and jam nut. B.M.A.S. Rail for Rifle Handguard . . . . (YHM-Hgd-Rail-Rif) $60.50
(barrel disassembly is required for installation) B.M.A.S. Rail for CAR Handguard . . . . (YHM-Hgd-Rail-CAR) $40.50
Rifle Length . . . . . . . . . . . . . . . . . . . . . . . . . . .(YHM-9480) $169.95
Four-Rail Carbine Length . . . . . . . . . . . . . . . .(YHM-9479) $148.95
*Note: This unit will not fit our Gas Piston Carbine.

32 Orders 24 Hrs: 1.800.998.7928


Command Arms M44 Four-Rail Handguard Set Carbine & Rifle Length
• Quality Handguard Set featuring four Picatinny Rails M203 Handguards
hidden under four removable rubber rail covers • Bottom is open to allow attachment of the M203
• The rails – positioned at 12-3-6-9 o'clock – offer Grenade Launcher or similar type flare launchers
unlimited accessory attachment • Government issue, molded black nylon with internal
• Rubber covers add excellent grip comfort and protect aluminum heat shields
the rails when not in use • Snap into the handguard cap and delta ring in place
• Internal metal heat shields dissipate rapid fire heat of standard handguards
• A handguard tool (see our HGD-Tool) is recommended • Provides the leverage needed to compress the weld
for installation spring inside the delta ring, and eliminates the need
For Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . .(FBS-M44S) $112.99 for a second pair of hands to help remove AR15/M16
For Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(FBS-M44L) $136.99 two-piece handguards
For Carbine . . . . . . . . . . . . . . . . . . . . . . . . . . . . (12990563) $51.50
For Rifle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (8448377) $46.50

M33 Carbine Handguard Set (FBS-M33) $89.95


• Features integral Picatinny rails under removable ARMS #51C Slimline S.I.R. System
rubber covers for A1/A2Carbines with Solid Carry Handle
• Molded of high density black polymer, with stainless
(ARMS-SIR51-C) $429.95
steel heat shields and comfortable rubber rail covers
• Available in Carbine length only – a direct snap-in • High quality technical forend for the AR15 Type
replacement for standard guards Carbine combines barrel free-floating, light weight,
and a multitude of accessory attachment rails
• Slimline Model 51C in the ARMS S.I.R. System is
intended to fit the A1/A2 Solid Carry Handle Carbines
• Leaves barrel free-floating from the barrel nut forward,
and is approximately 1/4" narrower than other S.I.R.
System models
• The S.I.R. Model 51C clamps solidly onto the Upper
Receiver’s fixed carry handle (both the carry handle
channel and the handle front support, utilizing two
A.R.M.S.® self locking thumbnuts) to provide an ex-
tremely rigid fit with no movement of rail or attachments
Sure-Grip Panels for Multi-Rail Forends • Extended bi-level rail platform will mount various scopes,
and red-dot or holographic sights, and offers the
• Black rubber grip panels for all rail forends – with possibility of forward mounting optics to co-witness with
Bushmaster logo molded in the iron sights through the channel in the upper rail
• Snap tightly onto the rails for a non-slip grip, rail • Total weight is 18.9 oz. including the two side and one
protection and handling comfort bottom accessory rail segments and sling swivel
A. Sure-Grip Full Length Rail Cover . . . . . . . . . . . (SCH-6L) $10.95
5 3/4" long for full length coverage on carbine forends. NOTE: This will not mount on the
Covers fifteen rail slots. Molded of black rubber with A3 Removable Carry Handle.
3 Bushmaster logos between raised ribs
B. Sure-Grip 1/3rd Length Rail Cover. . . . . . . . . . . . (SCH-6) $3.95
1-3/4" black rubber grip panel (covers five rail slots)
for Picatinny rail forends – with BFI logo.

A B For alternate optics mounting options for the A1/A2 solid carry
handle carbines, see also the A.R.M.S. #39A2 Bi-Level Rail
(ARMS-39) $148.95

www.bushmaster.com 33
Handguards & Accessories

A.R.M.S. #50 M-CV S.I.R. System Vented Free-Float Tube Forend (VAR-01K) $95.95
for A3 Carbines (ARMS-50M-CV SIR) $319.00 • Vented, free-floating, three piece forend can be
• Carbine length 5.56mm/.223 cal. “Free-Float”system easily installed for improved accuracy on your rifle
that can be installed in less than 5 minutes directly to • A new barrel nut and locking ring replace your existing
the standard barrel nut (without the Delta Ring) barrel nut
• The Front Sight, Gas Tube, Front Handguard Retaining (front sight, gas tube and barrel nut removal is required)
Cap, Barrel, and Barrel Nut do not need to be removed • Aluminum free-float tube screws on, and after “timing”
for installation, and no special tools are required (the the cooling vents, a locking ring holds it in position
S.I.R. Std. Sling Swivel is useable for installation as it • The center of the tube is knurled for a non-slip grip, and
is ground with a “screwdriver blade” on its end) a standard
• Perfect alignment with the receiver can be accom- stud is included for bipod or sling
plished via built in alignment anti-rotation locking tabs • High quality aircraft aluminum - black anodize finished
• Weighs 8.6 oz., includes Q.D. indirect air flow heat
shields and throughly vented for superior barrel cooling
• Rail Segments at the 3, 6 and 9 o’clock positions
can be exchanged, repaired or replaced without
removing the top rail

A2 Rifle Handguards
(9349059) $21.95 (pair)
Carbon 15
Conversion Kit • Compression molded of black polymer composite
material (not injection molded – these will not melt
Upgrade P21/P97 Pistols to P21S (AZ15921S) $159.95
during full auto or rapid fire)
• Comes with all parts necessary to convert older pistols • Non-reflective matte black finish, and are designed to
to new “handguard style” fit rifles with the Triangular Handguard Cap
• Includes Anodized Aluminum Rail with Dual Aperture • Internal Aluminum Heat Shields are included to protect
Rear and Blade Front Sights, Carbon 15 Fore-end, Hand- hands from barrel heat buildup
guard Retainers, Gas Block, Sling Studs and screws,
Nuts and Pins
• Due to necessary machining/tapping, this kit requires
factory installation

Oval P21S Handguard Kit (AZ15921) $69.95


• Includes Oval Carbon 15 Handguard, Handguard
Retainers, Gas Block, Screws and O-rings Traingular
• Factory installation required Handguard
Round
Cap
Handguard
Cap
Low Profile Rail Covers
A2 Carbine Length
• Covers protect your hands from sharp rail edges
• Smooth low profile appearance, and protect rail areas
Handguards
from damage (1005-914-4572) $21.95 (pair)
• Molded of Black Santoprene in two lengths – easily cut • Injection molded of black polymer
for custom applications composite – internal aluminum
A. Five Slot Low Profile Rail Cover . . . . . . . . . . . (SCH-4370) $3.95 heatshields included M4 Handguard
B. Full Length Low Profile Rail Cover . . . . . . . . (SCH-4373) $11.95 • Can only be used with the Round Cap for use
Handguard Cap with M203

NOTE: Rifle Length Handguards fit into the Triangular Cap. Standard


Carbine Handguards fit into the Round Cap. M4 (Oval Profile)
Carbine Handguards fit into either the Round Cap or the “notched”
Round Cap. See Handguard Cap prices and part numbers.
34 Orders 24 Hrs: 1.800.998.7928
M4 Dual Heatshield Handguards
(1005-914-4574) $45.50 (pair)
• Dual heatshields effectively increase barrel cooling,
especially in rapid fire
• Originally designed for use on full-auto machine guns,
this improved handguard set will fit most carbines with
either type of round handguard cap
• Molded of black thermoplastic composite material
with heavy dual aluminum shields (one finished black / Bushmaster V Match “Free-Floater”
one silver) Tubular Aluminum Forends
Also available: • Hard anodize finished aluminum assemblies fit over
M4 Single standard and match profile barrels “free-floating” them
Heatshield from Receiver forward for optimum accuracy
Handguards
(1005-914-4573) • Screwed directly onto the Upper Receiver in place of
$42.50 (pair) existing Handguards, Barrel Nut and Handguard Cap
• Installation requires removal of the front sight base
For Rifles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (SGW-02B) $63.95
For Carbines . . . . . . . . . . . . . . . . . . . . . . . . . . . (SGW-01B) $63.95
Bushmaster DCM “Free-Floater” Kit –
a Barrel Nut / Free-Floater Tube / Handguard
Combination (9349059CGA) $159.95 Hogue Free-Floater Carbine and Rifle Forends
• Meets all regulations for DCM Competition, and free
• A unique aluminum forend with a central rubberized
floats the barrel from Barrel Nut forward for optimum
band for ergonomic comfort and insulation against
accuracy
barrel heat and vibration
• A Sling Swivel Loop is mounted onto the front of the tube
• Installation requires removal of the front sight and barrel nut
• Handguards, Delta Ring, Weld Spring, Snap Ring and a
• This two-piece forend will fit our dissipator models
Special Gas Tube are included
Sold as a set with the Hogue Overmolded Rubber Pistol Grip,
or pieces priced individually:
Rifle Forend Only. . . . . . . . . . . . . . . . . . . . . . . . . . .(15002) $79.95
2 Piece Rifle Set . . . . . . . . . . . . . . . . . . . . . . . . . .(15003) $106.95
Carbine Forend Only
(Includes a specially bent Gas Tube) . . . . . . . . . . .(15004) $79.95
2 Piece Carbine Set . . . . . . . . . . . . . . . . . . . . . . .(15013) $106.95
Pistol Grip Only . . . . . . . . . . . . . . . . . . . . . . . . . . . .(15000) $31.95

DCM Free-Floater Tube / Custom Gas Tube Set Hogue


(2698823) $132.95 Grip
• Add your own rifle length handguards to this Competition
free-float tube
• Includes a custom bent gas tube
• Minor modifications to handguards are required for fitting
• Upper Receiver disassembly and Front Sight removal are
Daniel Defense Omega Rail
necessary for assembly onto rifle (DD-OMEGA7) $289.00
• Free Floating Barrel Design
• Light Weight
• User Installed with no Special Tools
• ZERO Modification to Host Weapon
• Uninterrupted Upper Rail Platform
• Integral QD Sling Swivel Mounts With Limited
Rotation Feature
• Aircraft Grade Aluminum
R15/M16 Handguard • Military Specification Type III Hard Coat Anodized Finish
Tool (HGD-Tool) $21.95 • Military Specification Fasteners
• Provides the leverage • Military Specification 1913 Picatinny Rails
needed to compress the • Will fit our ggas ppiston conversion kit
weld spring inside the
delta ring
• Manufactured from strong,
powder coated, 1/4" round
steel stock with protective
vinyl coatings

www.bushmaster.com 35
36

BARREL, HANDGUARD and FRONT SIGHT


COMPONENTS IN THIS DISASSEMBLY GROUP
Thermoset Handguard
Carbine Gas Tube 1005-914-3504
(2) 1005-914-4572
Handguard Cap SGW-10F-M
• Caliber: Chambered
Hand Guard for NATO 5.56mm
Snap Ring Also accepts
MS16626-1137
.223 Remington
Weld Spring 8448555
Front Sight Post 9349056 • Mode of Fire:
Delta Ring 8448712 M Semi-Automatic
4 Ba
rre Front Sight Detent 8448573
l-D
Barrel Indexing Pin 9349054BIP iame
ter Re Front Sight Detent Spring 8448574
Barrel Extension 9349054BE duce
d He • 30 Round Magazine
To A re Gas Tube Roll Pin Ms16562-106
Barrel Nut 9349054BN ccommo
date Front Sight Base With Bayonet Lug 9349054FSHA • 34.75" Length Overall
M20
Charging Thermoset Handguard 3 Gre
nade Barrel Subassembly
Orders 24 Hrs: 1.800.998.7928

Handle (2) 1005-914-4572 Laun


cher - A BBL-14M4 Crush Washer 12991533B
• 14.5" Barrel Length
(Color printed on 80# glossy stock paper)

Latch
Roll Pin Izzy Flash Suppressor
MS16562-96 CHARGING IZ-102660-FH • Button Rifling - 1 X 9"
Will be permanently
HANDLE ASSEMBLY pinned/welded over Right Hand Twist
8448517 on commercial barrels.
BUSHMASTER SCHEMATIC PARTS POSTER

Front Sight • Weight w/o Mag. 6 Lbs.


Parts Reference Schematic

Charging Handle Taper Pins (2)


Latch 8448519 9349054BTP NOTE:
Charging Handle
Front Sling Swivel 8448571 THIS RIFLE IS ALSO
Latch Spring 8448520
Front Sling Swivel Rivet AVAILABLE WITH THE FIXED
Charging Handle 8448697
8448518
UPPER RECEIVER, BOLT A2 HANDLE TYPE UPPER
Firing Pin 8448503-S AND BOLT CARRIER RECEIVER
Bolt Carrier Key Screw (2) 8448508
ASSEMBLIES / COMPONENTS REAR SIGHT
Bolt Carrier Key 8448506 ASSEMBLY/COMPONENTS
Rear Sight Rear Sight Windage Screw
REAR SIGHT Windage 9349076
Firing Pin Retaining Pin 8448504 ASSEMBLY Knob Pin
9349072-1 MS16562-98 Rear Sight Base 9349074-1
Cam Pin 8448502 Index Screw Rear Sight Helical
9349065 Rear Sight Spring 9349069
Bolt Carrier 8448507-S Windage Rear Sight Ball Bearing
CARRY Index, Elevation
Knob MS19060-4808
BOLT CARRIER 9349066-1
HANDLE 9349077 Rear Sight Aperture
Knob, Elevation Ball
ASSEMBLY Bearing 9349075
ASSEMBLY 9349067-1 Rear Sight Flat
8448501 MS19060-4808
Spring 8448536
9349063-9 Elevation Spring
Extractor Pin 8448513 Index Spring Rear Sight Ball Bearing
9349070 9349063-8
UPPER
Ejector Roll Pin Ms19060-4808
Rear Sight Elevation Rear Sight Helical RECEIVER &
Bolt Gas Rings (3) 8448511k MS16562-98
Bolt 8448510 Spring Pin Spring 9349069 BARREL
Ejector
FORWARD ASSIST Ms16562-121 ASSEMBLY
Extractor Spring 8448755SP Spring
Extractor Spring Insert 8448754 8448516 ASSEMBLY 9349086KIT BURA3B 14M4 IZ
Extractor 8448512 Forward Assist Pawl Detent 8448544
Thumb Nut Assembly
Plunger Pawl Spring 8448542
BOLT ASSEMBLY Ejector 9349063-7 (2 Places)
9349085
8448515 Forward Assist
8448509 Clamping Bar
Spring Pin
9349063-3
MS16562-121
Cross Bolt
Pawl
20" Barreled A2 Semi-Automatic Rifle . . . . . . . . . . . . . . . . . . . . . . . . (QP-010) $4.95
14.5" Barreled M4A3 Type Carbine (shown) . . . . . . . . . . . . . . . . . . (QP-010B) $4.95

9349063-4 (2 Places)
Spring Pin
Carry Handle - Forged
MS16562-103 Forward Assist
9349063-2
Pawl 8448543
Forward Assist
Spring 8448540 Ejection Port
Cover Pin 8448533
Ejection Port Cover Spring
8448532
Ejection Port Cover
8448525
Upper
Receiver
8448524-V
Ring,
Retaining Cover
M4A3 CARBINE MS16632-1012
5.56MM / .223 REM.
Part # BCWA3F 14M4 IZ
LOWER RECEIVER, PISTOL GRIP,
BUTTSTOCK and MAGAZINE
COMPONENTS IN THIS
DISASSEMBLY GROUP ®
Car. Buffer Spring Buffer Retainer
1005-914-4564 8448582 NOTE:
Hammer with J pin
Buffer Retainer Pre-Ban 30 Round
8448612-SK
6 Position Spring 8448583 Magazine shown
Hammer Spring here for disassembly purposes.
Carbine Receiver
8448611 Post-Ban 10 Round Magazines can not
Extension - 1005-914-2929-6
Safety Selector Lever be disassembled without causing damage.
Buffer Assembly 9381367-S Rebuild Kits for 20 & 30 Rd. Magazines are
1005-914-4578
Bolt Catch available.
8448628 They include all parts shown here except box.
Lower Bolt Catch Roll Pin
Pin, Buttstock Receiver MS16562-119 Magazine
Slide Lock 9349102-S Follower 8448672
Bolt Catch Plunger
1005-914-3229 Takedown Pin Spring
8448634 Magazine
8448586
Receiver Box Assy.
Takedown Pin Detent Bolt Catch
Extension FIR Spring
Lockpin Spring 8448585 E
Nut 8448633
1005-916-9178 Takedown Pin
5310-917-1154 SAF
E
Collar, 8448584 Magazine
Buttstock Catch
Tube Lock 8448638
1005-914-2942
Pivot Pin Detent
8448585
Safety Detent Pivot Pin Spring
Telescoping 8448631 8448586
Buttstock Safety Detent Spring Pivot Pin
Trigger 8448621
Assembly 8448516
Guard
1005-087-8988-PK Pivot Roll Pin Disconnector Spring
Pistol Grip 8448594
Telestock Latch 9349127 MS16562-35
1005-087-8987P Disconnector
Lock Washer
Roll Pin Magazine 9349114-S
MS35335-61
Lockpin Nut MS16562-106 Catch Spring
5310-917-1215 Pistol Grip Screw Trigger 8448592-S
8448637
AN501D416-18
Trigger Guard Trigger Spring
Magazine Assembly Magazine Floor
Hammer and 8448593
Made with Pride Catch Button 8448587 Plate 8448673
Trigger Pins
in the U.S.A. 8448636
8448609 Magazine Spring 8448671

www.bushmaster.com
37
Handguards & Accessories

SureFire M910A-WH Vertical


Foregrip Weaponlight (M910A-WH) $543.00 SureFire G2™
The SureFire Millennium M910A Vertical Foregrip Weap- Nitrolon® Flashlight (G2-BK) $36.00
onLight attaches to Picatinny rail interface-equipped • A compact (palm size) high-intensity
weapons via a built-in dual thumbscrew mount. Each unit incandescent flashlight for tactical, self-defense,
is equipped with five separate switches: (1) two pressure- and general use with a tough polymer body
sensitive momentary activation pads to control the main • Its smooth, brilliant, pre-focused tactical-level beam has
battle light – one on each side of the grip for ambidex- four times the light of a two D-cell flashlight – bright
trous operation (2) a constant-on switch (3) a system dis- enough to temporarily blind and disorient an opponent
• Small size, light weight, and high output make it a
able switch to lock the light in the OFF position for covert
perfect everyday carry light
operations or to eliminate accidental light activation • Rugged, lightweight, corrosion-proof Nitrolon polymer
during storage, and (4) a third, smaller momentary switch body (Black Part Number listed here – Olive Drab, Tan
to control two low-output LEDs that are useful whenever or Yellow flashlights available on special order)
there is a need for a very small amount of light (stealth • O-ring sealed, weatherproof
navigation, night-time breaching operations, etc.) • Tailcap switch: press for momentary-on,
twist for constant-on
• Batteries – Three SureFire Lithium SF123 • Switch lockout prevents accidental activation
3.0 Volt (10 year shelf life) during transport or storage
• Lamp Assembly/Runtime – SureFire MN10 • Max Output: 65 lumens
Xenon/Halogen gas-filled lamp assembly with • Runtime: 60 minutes
125 lumens output for 60 minutes • Length: 4.90”/Weight: 4.1 Oz.
• Constructed of Nitrolon® (a non-conductive, • Battery: Two 123A Lithium
impact-resistant, aramid glass-filled polymer)
• Pyrex® lens window
• Shock-isolated aluminum bezel with hard-anodized finish SureFire M79 Flashlight
• Secondary, white LED navigation lights with separate Mount (M79) $38.00
switching • A sturdy aluminum and polymer mount that will
• Flawless white beam, always in focus clamp any 1” diam. flashlight to any rifle or carbine
• Light output bright enough to temporarily blind equipped with a Picatinny accessory rail
an opponent • Flashlights are held with an adjustable cam-type
locking clamp

SureFire Scout Light M600B (M600B) $310.00


• Two-battery Scout Light from SureFire clamps
to any Picatinny rail by means of a knurled thumb
screw on its rigid M75 rail mount
• Powerful LU60A incandescent lamp module
produces 65 lumens of light
• A momentary-on remote tape switch is included
as well as a tail cap on/off switch
• Two SureFire Lithium SF123A 3.0 Volt Batteries
(10-yr. shelf life)
• Output/Runtime – Max.Output of 65 lumens
Command Arms Flashlight with a 60 minute runtime
• Click on/off and
Grip Adapter (FBS-FGA) $69.99 momentary switch
• Multi-tasking foregrip combines a flashlight • MilSpec Type III
mount for 1" diam. lights, and vertical grip all in one – hard-anodized
as well as including an accessory rail section that serves aluminum body
as a laser mounting point, and a battery or small parts
storage compartment within the grip
• Thumb activated push button on the back of the grip
operates the flashlight’s on/off switch and allows for
signaling Rail Mount Switch Kit for Streamlight / SureFire
• Removable side plates on the grip utilize a rubber Flashlight Pressure Switches (SCH-4366-KT) $12.95
surface to enable installation of a pressure switch • 3 piece kit to mount Streamlight or Surefire switches
underneath the side plate onto any Picatinny Rail without adhesives or velcro
• Fits all Picatinny Rails, clamps on with thumbnuts • Base snaps on the rail and
for a “no tools” installation, and has Command Arms’ the insert encapsulates the
Lifetime Warranty switch pad – molded black
Santoprene Thermoplastic

38 Orders 24 Hrs: 1.800.998.7928


Gunsmithing Accessories

Gunsmithing Tools & Supplies Master Armorer’s Tool Kit


Our company policy is to offer Gunsmithing • Kit Includes: Armorers Action Block Kit; Lower Receiver
Vise Block; Heavy Duty Combination Armorer’s Wrench;
Assembly at No Charge when parts are purchased Barrel Vise Jaw Blocks; Drift Punch Set; Rifle Cleaning
from us (with the exception of sight bases). Kit; .223 Go/No-Go/Field Headspace Gauges; Firing
We will also offer our professional gunsmithing Pin Protrusion Gauge; A1 and A2 Sight Tools; Receiver
services to any customers who care to ship us Push Pin Tool; 200 page M16 A2 Marine Corp. Technical
Manual; M16 A1 Technical Manual; Armorer's DVD;
their AR15 Type firearms or assemblies for repair Tetra Gun Care Kit; 2 complete spring packages (with
or buildup – and we will work on brands other carbine & rifle buffer springs), and an assortment of
than Bushmaster. Gunsmithing time is charged at pins, detents and caps for fast and foolproof assemblies
$40.00 per hour, and we charge a flat $16.50 fee and installations
for return shipping of your rifle, upper or parts. $319.95 (Part #s A MARM KIT)
For an estimate on your gunsmithing needs,
call 1-800-998-7928 during business hours, or Barrel Vise Jaw Blocks
E-mail a complete description of your needs to: • Dual slot design for the
Techsupport@bushmaster.com installation of barrels, front
sight removal rear sight work,
5.56mm NATO cleaning, or any job that requires immobilization
Caliber Go-Gauge • Not limited to AR15/M16 servicework
$15.95 (AMER-001)
• Used to determine
adequate headspace
• Chamber depth enough Receiver Push Pin Tool
or oversized bolt • Designed to push out toughh Takedown and
$30.00 (HGO223G) Pivot Pins in your lower receiver. Machined from
Also available – Headspace
Gauges for .50 BMG Caliber.
black nylon material so it won’t mar the gun’s finish
5.56mm NATO Call for pricing. • Fits into the buttstock storage compartment
Caliber No-Go Gauge $7.50 (IMP-1)
• Used to determine excess headspace
• Chamber depth too great, or undersized bolt U. S. Gov’t. Tech Manuals
$30.00 (HGO223N) • Complete Maintenance, Repair
and Troubleshooting Information
5.56mm NATO Caliber Field Gauge for either the A1 or A2 model
• Used to determine overly excessive headspace For M16A2 $11.95 (TM9-1005-319-23P)
due to chamber and bolt wear For M16A1 $11.95 (TM9-1005-249-24P)
$30.00 (HGO223F)
.308 Cal. Go-Gauge . . . . . . . . . . . . . . . . . . . . . (HGO243G) $30.00 Drift Punch Set
.308 Cal. No-Go Gauge . . . . . . . . . . . . . . . . . . (HGO243N) $30.00 • Set of four excellent Starret
.308 Cal. Field Gauge . . . . . . . . . . . . . . . . . . . . (HGO243F) $30.00
Punches – 1/16"; 3/32"; 1/8"; 5/32"
Deluxe Armorer’s Tool Kit $22.95 (STA PNCHSET)

• A complete tool kit for all necessary repairs and instal-


lations (choose from A1 or A2 version – tools differ)
• Kit includes: Dual Slot Barrel Vise Jaw Blocks; Drift
Punches; Armorers Barrel Wrench; 200 Page Technical
Manual; Sight Tool; Cleaning Kit; Tele-Stock Wrench;
Go; No-Go and Field Headspace Gauges; Firing Pin
Protrusion Gauge; Receiver Push Pin Tool; Spring The Bushmaster DVD
Package with Standard Buffer Spring; and Assorted
• Complete assembly and
Pins and Caps
buildup details for the
$180.95 (Part #s A1 DARM KIT / A2 DARM KIT) XM15/AR15/M16 rifle
$25.95 (ADS-002)
Bushmaster Standard Armorer’s Tool Kit
• Kit includes: Dual Slot Barrel Vise Jaw Blocks; Drift
Punches; Barrel Wrench; Receiver Push Pin Tool; The Bushmaster
Technical Service Manual; Sight Tool; Cleaning Kit; Video (VHS)
Spring Package w/Standard Buffer Spring;and Assorted $21.95 (ADS-001)
Pins and Caps
$85.95 (Part #s A1 ARM KIT / A2 ARM KIT)
www.bushmaster.com 39
Gunsmithing Accessories

AR15 Multi-Tool Firing Pin Protrusion Gauge


• Adjusts front sights • Checks firing pins for minimum (.028") and
• Cleans bolt faces maximum (.036") protrusion
• Includes non-mar disassembly punches • Weight: 1.125 lbs. / Length: 12.25"
for take down and lower receiver pins $15.95
• Emergency Phillips screwdriver (MMT-0005)
or scraper
• Lanyard loop to tie it to your
web gear or tool bag Heavy Duty Combination AR-15
$12.95 (BT-MCT) Armorer’s Wrench
• Two-sided wrench at one end fits either multi-point or
NEW Gun Cleaning Pad peg style barrel nuts on barrels up to 1" in diameter,
and a breaker bar or torque wrench can fitted into the
• Perfect for Rifles, shotguns, 1/2" square drive opening
Muzzleloaders – protects your table and firearms • Other end fits Telestock Locking Nuts, and a large flat
from scratches and spilled cleaning fluids screwdriver blade is also included for use on standard
• Bonded waterproof backing prevents any soak-thru buttstock screws
• Absorbent, felt-like fabric • Two other slots fit A1 and A2 birdcage flash hiders and
• Keeps parts organized and in place receiver extensions
• Durable, stain resistant and long lasting $22.50 (1570)
• Number One seller in the country
• Made in USA
$12.95 (10012)

AR-15 Combination Armorer’s Wrench


for Newer TeleStocks
• A newer design Armorer’s Wrench that fits the latest
model telestocks with the cuts on the locking ring
• Weight 1.125 lbs – 12.25" overall
$23.50 (1570-4)
( )

Bushmaster Operating & Safety Manual


• Field Stripping; Cleaning, Maintenance on all
Bushmaster XM15 and Carbon 15 Models –
with Parts Diagrams, Safety Field Bolt Carrier Carbon Scraper
Tips and Sight Zeroing
• Tool steel scraper quickly removes carbon buildup
$2.95 (BFIMANA2OP)
in all AR15/M16 bolt carriers
$20.95 (BC01)

TeleStock
Wrench for new style (ribbed) TeleStocks
Armorer’s Barrel Wrench • An economical tool for the locking nuts on newer
• For AR15/M16 barrel removal and installation type telestocks (fixed and collapsible)
• Note: Will not fit our DCM profile barrels $6.50 (223-telewrench2)
$11.95 (RM-001)

Bolt Carrier
Carbon Scraper Sight Adjustment
ustment Tools
T
• A sturdy workbench tool for the AR15/M16 gunsmith • Adjustment tools for A1 & A2
• Makes quick work of cleaning out carbon buildup Front Sights, and A1 Rear Sightt
inside the Bolt • Machined steel with black oxidee
• Weight: 1.25 lbs. / Length: 13" finish – designed to fit in the
$31.95 (MBC-02) stow-grip or buttstock compartment
tment
For A1 Rifles (Round Sight Post) . . . . . . . . . … (RAY-006) $8.50
For A2 Rifles (Square Sight Post) . . . . . . . . . … (RAY-005) $8.50
40 Orders 24 Hrs: 1.800.998.7928
Lower Receiver Vise Block Dewey .308 Cleaning Rod
• Clamp it in a vise, and it’s magazine shape locks • A 36" long, one piece, .30 Cal. nylon coated rod
into the magazine well of any AR15/XM15/M16 lower with Jag and Brush Adapter (12/28 male thread)
receiver for assembly or maintenance work • Thick nylon coating protects the bore from
• Machined from high density polyethylene. Use to mount scratches, and ball bearing handle allows the
Lower Receiver in either upright or inverted position rod to spin as it tracks the rifling
• Will not distort receiver or harm its finish. Also $28.95 (DEWEY-30C-36)
available, a larger version for the Bushmaster .308
$31.95 (OM-006)
$37.95 (OM-007)
For Bushmaster .308 Dewey .50 Caliber Two-Piece Cleaning Rod
• 54” long, two piece rod perfect for the new
Bushmaster BA50 .50 BMG Cal. rifle
• 44" of coated rod with 5/16 stainless steel extension
Bushmaster
• Cleans everything from .35 Caliber and up. Supplied with
Armorer’s Action 50-J Brass Jag and adapter to accept 8/32 brushes
Clamp for all
$42.95 (DEWEY-50C54)
AR15/M16 type rifles
ifles
• Works with all AR type rifles – even early A1’s and A3
“flat-top” Uppers with Carry Handle in place Dewey AR15/M16 Breech Rod Guide
• Used in conjunction with an Armorer’s Barrel Wrench,
• Guides cleaning rod straight into the barrel from
this clamp eliminates barrel vise jaw blocks for remov-
breech end
ing or replacing barrel assemblies, and is necessary
when installing tubular aluminum V Match handguards • O-Rings seal off the chamber to prevent any
or competition free-floating tubes Also available, a back-flow of cleaning solvents and debris into
larger Bushmasterr .308 the action, trigger and magazine areas
(Upper receiver • For barrels 24" and longer, we recommend using
is not included) a 36" rod with this rod guide (see Dewey Rod
$41.50 (OM-003) Dewey-22CM-36). Also available – Dewey .308
$53.95 (OM-004)
Breech Rod Guide
For Bushmaster .308 $23.95 (Dewey-1000)
y-1000)

Gunslick® .22 / .223 Cal. Cleaning Kit


• These quality kits are offered in either .22 Caliber Safety Block for AR-15/M16 Rifles and others
or .30 - .32 Caliber versionss
• Molded plastic with the Bushmaster name
$15.95 (62008-223) • Cone end inserts into the firing chamber, handle
protrudes to indicate a
Gunslick® .308 safe firearm condition
Cal. Cleaning Kit $2.50 (SBBFI)
$15.95 (62014-308)

AR15/M16 Lower
Receiver Safety Block
Dewey Coated Rods
ds • This bright yellow safety block
• Top quality one-piece rods featuring an unbreakable ball locks into the magazine well when
bearing handle, and a nylon coating to protect rifling the bolt is retracted and indicates
and preserve accuracy a safe weapon
• 8/32 female threaded to accept standard brishes or $7.50 (SB16)
other manufacturer's accessories
• Universal brass patch loop included Dewey Cleaning Rod Adaptor
Dewey 22CF-24" (For barrels to 20") . . . . . . . (DEWEY-100) $27.95
Dewey 22CF-30" (For barrels to 24") . . . . . . . (DEWEY-200) $27.95 • A machined brass adaptor threaded (female 8-36 /
Dewey 22CF-36" (For barrels longer than 24")* male 8-32) to accept the military type cleaning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (DEWEY-22CM-36) $28.95 brushes – allowing them to be used with Dewey and
other commercial cleaning rods
$3.25 (DEWEY-22-M-ADPT)

*8/32 male threaded with an adapter. Use with a Breech Rod Guide in
barrels 24" or longer.
www.bushmaster.com 41
Gunsmithing Accessories

Dewey Delrin Otis Tactical Cleaning System


Cleaning Rod Guides • 23 part weapons maintenance system cleans all rifles
• Maintain the original accuracy of .177 to 50 caliber, shotguns .410 to 10 gauge, and
your rifle by protecting the all pistols .177 to 45 caliberr
important muzzle of the barrel • Packed into a zippered,
Models for: round, blacknylon
AR15/M16 Postban (.700" diam. at muzzle) (DEWEY-1100) $9.95 soft-pak (4" by 2")
AR15/M16 PreBan . . . . . . . . . . . . . . . . . . . . . .(DEWEY-300) $7.95 • Includes 5 brass bore
M1 Garand . . . . . . . . . . . . . . . . . . . . . . . . . . . .(DEWEY-400) $7.95 brushes; 3 forged brass
M14 & M1A . . . . . . . . . . . . . . . . . . . . . . . . . . (DEWEY-500) $7.95 tips; 3 memory-flex
Mini 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(DEWEY-600) $7.95
Mini 30 . . . . . . . . . . . . . . . . . .(DEWEY-700) Also fits Bullpup $7.95
rods;t-handle; shotgun
Ruger 10-22 . . . . . . . . . . . . . . . . . . . . . . . . . . (DEWEY-800) $7.95 adapter; all caliber
patches and patch
savers; 1/2 oz. bottle of
bore solvent; NATO adaptor or for mili-
i
The Otis .50 Cal. Cleaning System tary brushes and bore reflector/safety flag
• Specifically designed for all your .50 caliber rifles and $47.95 (750)
pistols, and fits in a handy Cordura zippered pouch
• Includes two .50 caliber Memory-Flex Cleaning Rods:
an 8" length for .50 caliber pistols, and a 40" for .50 Otis Technology
caliber rifles, along with a large heavy weight brass Gun Cleaning CD
obstruction remover and a slotted tip
• Weight: 0.735 lbs. / Dimensions: 4" x 4" x 2.5" • All the tips, techniques and
information needed to keep
$51.66 (250) any rifle, pistol, shotgun or
blackpowder piece in perfectly
functioning, spotless condition
– compiled in a handy MiniDisc
CD format
• A full color printed brochure
with highlights from the CD is
included – both are packaged
in a ziplock bag – “The Industry
Guide to the Proper Care and
Cleaning of Firearms”
$5.95 (2001)
Otis Buttstock
Stowage Cleaning Kit
• A 16 pc cleaning kit for the AR15/M16 packed in a Hoppe’s BoreSnake … World’s Fastest
wedge shaped Cordura pouch shaped to fit inside Gun Bore Cleaner®
the rifle’s buttstock storage compartment – lifetime
guaranteed by Otis Technology • Cleaning system for all
.22 Caliber Centerfire
• Includes Bore and Chamber Brushes, Memory-Flex and Rimfire rifles
Rod, Double End Brush, Slotted Patch Tip, Patches,
NATO Adapter, Bore Light, Chamber Rod, T-Handle, $17.90 (24011)
CLP Solvent, and more
$46.95 (224-2)

5.56mm /.223 Rem. Caliber


Bore & Chamber Brushes
• High quality tools for barrel cleaning
• 8-36 threads
Chamber Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . (BR-001) $2.00
Bore Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (A190) $1.65

42 Orders 24 Hrs: 1.800.998.7928


NEW .50 BMG Cal. Cleaning Gear AR15/M16
Bore Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (B-50) $1.95 Handguard Tool
Chamber Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . (SB-12) $1.95 • Provides the leverage needed to compress the weld
Chamber Rod . . . . . . . . . . . . . . . . . . . . . .(DEWEY-CHR-50) $19.95
Chamber Brush Adapter . . . . . . . . . . . . . . . . . (DEWEY-SBA) $2.95 spring inside the delta ring, and eliminates the need
for a second pair of
hands to help remove
AR15/M16 two-piece
KleenBore Bore Brushes handguards
• Top quality materials all threaded 8-32 for • Works well on both
commercially available rods straight and tapered
6.8mm /.270 Caliber Bore Brush… . . . . . . . . . . . . .(A-179) $1.65 delta rings
7.62mm /.30 Caliber Bore Brush… . . . . . . . . . . . . (A-180) $1.65 $21.95 (HGD-Tool)
9mm /.38 Caliber Bore Brush… . . . . . . . . . . . . . . . . (A-181) $1.65
.44 /.45 Caliber Bore Brush… . . . . . . . . . . . . . . . . . (A-182) $1.65

NEW Rem Oil 2oz Bottle


• Proven superior for cleaning,
lubricating and corrosion-protecting
fine firearms
• Ideal for all outdoor sports and
marine equipment
$1.94 (10013) Cleaning Kit Case
• New Gov’t. Issue nylon cases with snaps
and velcro closures
Gov’t. Issue M16 Cleaning Kit • Great for holding all sorts of small parts and gear
• Kit includes a T-Handle; a • Available in Olive Drab (PO3030D) or Black
four piece rod; swab holder; bore and chamber brushes $8.95 each (PO303B)
• Will fit in the standard buttstock
compartment of the AR15, XM15 or M16 rifle
• All threading is Military 8-36 Threading
$10.50 (A CLEAN)

The Bushmaster Gun Pad Bushmaster Cleaning Kit COMBO


• Sturdy counter-top protector for gunsmithing assembly • The 7 Piece Gov’t. Issue Cleaning Kit packed in a nylon
work and it doubles as a computer mouse pad Cleaning Case Kit
• This big (18" x 12") brightly colored pad has crisp
Cleaning Kit in Black Case . . . . . . . . . . . . . . … (cleankitB) $16.95
images of Bushmaster rifles, a protective laminate Cleaning Kit in Olive Drab Case… . . . . . . . . . (cleankitOD) $16.95
surface, and soft, non-skid, foam padded backing
$9.95 (QP-014)

Birchwood Casey Super Black Touch-Up Pens


• Touch-up nicks and scratches on black anodized alumi-
num, and polished or matte finished alloy gun receiv-
ers, trigger guards, scopes or black painted surfaces
– a fast drying, lead-free paint -with superior adhesion
and durability for gunsmithing uses
• The felt tip chisel point touch-up pen holds 1/3 fl. oz.
For Gloss Black Finish . . . . . . . . . . . . . . . . . . (Gloss-15101) $6.95
For Flat Black Finish . . . . . . . . . . . . . . . . . . . . . . . . (15102) $6.95

www.bushmaster.com 43
Gunsmithing Accessories

The Tetra Gun Cleaning Pack Tetra Field Kit


A superior firearms maintenance and preservation • All the necessities to keep your gun functioning
system based on a revolutionary breakthrough in on the range or in the field
synthetic polymer technology. • Includes: 1 oz. tube Tetra Gun Grease and
1 oz. plastic bottle Tetra Gun Oil
Tetra’s Gun Cleaning Pack Contains:
$7.95 (TETRAFIELDKIT)
• 1 oz. Tetra Gun Lubricant: A synthetic, polymer
based lubricant and conditioner for action and
all moving parts
Tetra Gunsmith's Kit
• 1 oz. Tetra Gun Grease: Synthetic polymer based white
grease for use on all metal to metal contact surfaces • Professional size quantities of high quality Tetra
• 3.75 oz. Tetra Gun Spray: Synthetic polymer based products: 2 - 1 oz. tubes of Tetra Gun Grease /
cleaner and light lubricant – removes dirt, combustion 8 oz. Tetra Gun Oil / 8 oz. Tetra Gun Spray
residue, old lubricants and solvents, and offers $31.95 (TETRAKIT)
corrosion protection
• 4 oz. Tetra Copper Solvent: Concentrated copper,
lead, powder, and plastic remover. Removes stubborn Tetra Gun Blue & Rust Remover
fouling from barrels and provides fast, effective • Removes old bluing
cleaning without "barrel etching" and rust quickly and
$23.50 (5337100802) effectively without
damage to base
metal – a necessity
before re-blueing or
browning. 3 fl. oz.
$5.50 (5337100001)

Tetra Gun
Liquid Gun Blue
• A great product for touch-up or complete re-blueing
of firearms (not for aluminum, steel only)
$5.50 (5337100002)

Tetra Gun Copper Solvent


Tetra Gun Grease $8.50 (5337100501)
1 oz. Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100005) $5.50

Cleaning Patches
Tetra Gun Oil
• Bag of 100
1 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100006) $4.50
4 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100303) $7.95 • Sized for the AR15/M16 rifle bore
8 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100304) $12.95 $5.50 (923)
Tetra Gun Spray Cleaner
3.75 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100201) $7.50
8 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5337100202) $11.95 Firepower FP-10 “CLP” Type Lubricant
• A Cleaner, Lubricant, and Preservative
ervative
for Weapons & Weapons Systems,ems,
Firepower FP-10 is a semi-synthetic
thetic
CLP specifically formulated for the
serious Shooter, Soldier, Law
Enforcement Officer, Sportsman an
and Professional Armorer
1 oz. Bottle… . . . . .(FP-10-1) $4.25
4 oz. Bottle… . . . . .(FP-10-4) $6.50
16 oz. Bottle… . .(FP-10-16) $14.95

44 Orders 24 Hrs: 1.800.998.7928


Competition Rifle Parts

Competition Rifle Parts can be fitted Bushmaster Two Stage


to standard models as well. Competition Trigger
• Includes all the specially modified parts shown plus
Bushmaster DCM 1/4 Minute Windage • Can be set for a 3 1/2 lb. DCM legal 1st Stage and a 1
Competition Rear Sight Conversion Kit lb. (2nd Stage) letoff. NOTE: This Trigger will not fit in
• Convert your old A2 sight to 1/4 Minute of Colt Lowers with a “Block” over the Safety, and is not
Windage Adjustment configuration with these designed to work with large Colt pivot pins
high quality competition parts $127.95 (8448592-SCGK)
• Kit includes 1/4 M.o.A. Drum, Pin, Detent
Springs and Balls Also Available…
$21.50 (AR 1/4MIN CONVK) ion
Two Stage Competition
Trigger with Bushmaster
ster
DCM Competition Lower Receiver Assemblies mbidextrous Safety
All Include our factory set DCM Two-Stage $148.95 (8448592-SCGKA)
Competition Trigger

Complete DCM Competition Lower Assembly DCM Competition A2


• Lower Receiver with A2 Buttstock, Competition Upper Receiver Assemblyy with
Buttstock Weight, Pistol Grip and Two Stage Trigger as etition R
“Stay Straight” A2 Competition Rear Sight
shown • Includes Forward Assist, Ejection Port Cover and One
$430.00 (A LOW STD W/CGWT) M.S.R.P. Competition Sight Micro-Aperture in your choice of four
“peep” sizes – please specify size
DCM Lower Assembly DCM Upper Receiver Assembly
• Same assembly as above less Buttstock Weight with 1/2 Minute Rear Sight . . . . . . . . . . . (A2URCG2XR) $223.95
DCM Upper Receiver Assembly
$410.00 (A LOW STD W/CG) M.S.R.P. with 1/4 Minute Rear Sight . . . . . . . . . . . (A2URCG4XR) $223.95

DCM Lower Lower Receivers available


Receiver Assembly only through FFL dealers.
minus Buttstock Bushmaster Competition “Stay Straight”
• Includes Pistol Grip, A2 Rear Sight Assembly
DCM Two Stage Trigger
• Highly accurate Rear Sight Assemblies with the
and all internal parts –
new “Stay-Straight” dual detent mechanism
as shown at left
(keeps the sight from moving or canting) for the
$360.00 (ALOW W/OSTK W/CG) M.S.R.P. serious competition shooter
• Elevation and windage mechanisms are available
Bushmaster DCM Competition in either 1/2 or 1/4 Minute of Adjustment
Heavy Barrel with Factory Matched • The flip-up is machined to allow installation
Bolt and Front Sight Base of different interchangeable
• Micro-Apertures (one aperture included with each
• A lapped 20" Barrel – button rifled in 1 x 8 Right Hand complete sight or flip-up assembly)
Twist – features an 11° crowned muzzle designed for
competition, and a custom match hybrid chamber- • These precision machined inserts are available in 4
ing with longer throat, or “Leade” to accommodate aperture sizes: .036" / .040" Standard (9 out of 10
5.56mm ammunition shooters find the .040" standard aperture works best,
your eyes may differ) / .046" or .052"
052
• Chrome Moly Vanadium Steel (non chrome-lined) with
1/2 M.o.A. Rear Sight
a Manganese Phosphate finish with choice of aperture size
• Diameter from the barrel extension forward to the sight . . . . . . . . (9349072CGA2XR) $122.50
base step is a full 1". NOTE: Requires assembly by an 1/4 M.o.A. Rear Sight
experienced Gunsmith to achieve optimal accuracy. with choice of aperture size
$313.95 (9349054-20CGA) . . . . . . . . (9349072CGA4XR) $122.50

www.bushmaster.com 45
Competition Rifle Parts

Bushmaster Competition Sight Service Tool


• A combination Frontt Sight Adjustment Tool
Bushmaster DCM Competition and Rear Shroud Insert
sert “Screwdriver”
Upper Receiver/Barrel Assembly machined of steel with black
finish, and knurled for a
• For the serious High Power Competitor – this non-slip grip
Upper Assembly includes all the competition • Length – 2"
modifications needed to win
$10.95 (CG-MPT)
• Redesigned “Stay-Straight” Dual Detent
Rear Sight with Competition Hood
• Assembly includes the matching DCM Free-Floater Tube / Custom Gas Tube Set
Bolt and Bolt Carrier • Add your own rifle length handguards to this Competition
$790.00 (PURA2B 20CG8XR) free-float tube – includes a custom bent gas tube
• Minor modifications to handguards are required for fitting
• Upper Receiver disassembly and Front Sight removal
AR15 Bolt Release Extention are necessary for assembly onto rifle
• A finely machined aluminum lever • As installed on DCM Rifle
to help High Power Competitors $132.95 (2698823)
get back on target faster by keep-
ing the forearm hand in place
$47.95 (SSP-1)

Competition Handguard Balance Weight “The Hood Kit”


• Includes our Competition Flip-up; the Hood Sight Shroud
• This lead balancing weight fits inside the bottom
and your choice of one Competition Aperture numbers
half of the standard A2 handguard to add forend
below indicate the size of the aperture opening
weight to your competition rifle (a companion to
• Choose from: .036" (CGF36HK) / .040" (CGF40HK)
the buttstock weight below)
.046" (CGF46HK) / .052" (CGF52HK)
• Weighs approx. 3.5 lbs.,and can be cut down to
$40.50
achieve perfect balance
nce
$31.95 (GPSS-HBW)
“The Hood”
A2 Buttstock Balance
nce Weight • A Competitionn Rear Sight Shroud,
(center in photo)
oto) this tubular,
• Fits snugly in the standard
ndard A2 threaded insert for our competition flip-up
buttstock compartment without rattle – eliminates all glare and improves your sight picture
a 3.62 lb. chunk of lead that can be trimmed • Internally threaded to accept the micro-aperture
to help achieve a perfectly balanced rifle of your choice
• Its wedge shape and rubber pressure pad ensure a $15.95 (9349075CGH)
tight, rattle-free fit
$21.50 (Part # 9349119SW)
Extra Competition Sight Apertures*
• These thread directly into the flip-up in your
Bushmaster DCM “Free-Floater” Competition Sight
Kit – a Barrel Nut / Free-Floater Tube / • Your vision determines which Micro-Aperture suits you
Handguard Combination best (most shooters prefer the .040" standard aperture)
• Choose from: .036" (CGI36) / .040" Std. (CGI40) /
• This forend system meets all regulations for DCM .046" (CGI46) / .052" (CGI52).
Competition, and free floats the barrel from Barrel
$10.95 ea.
Nut forward for optimum accuracy *Any Three Apertures can be purchased as a set . . . . . . . $25.95
• A Sling Swivel Loop is mounted onto the front of the
tube – Handguards, Delta Ring, Weld Spring, Snap
Ring and a Special Gas Tube are included Moly-Slide™ Lubricating Paste
$159.95 (9349059CGA)
• A 60% Molybdenum Disulfide (MoS2) lubricating paste
for wear resistance, anti-seizing and anti-galling on
cams, bushings, and other sliding surfacess
• Has a very wide working temperature
range with minimal evaporative loss
• The 1 oz. jar will usually last the average
shooter/gunsmith for years
$8.50 (MS-100)
46 Orders 24 Hrs: 1.800.998.7928
Short Competition Hood Safety Block for AR15/M16
• This variation on the Competition Rear Sight Shroud Rifles and Others
above was created to allow shooters who wear glasses • A plastic SafetyBlock with Bushmaster name molded in
to get as close as = possible to the rearr – the cone end is inserted into firing chamber, and the
sight without scratching their glasses “handle” end protrudes to show safe condition of rifle
$15.95 (9349075CGH-S) • Bushmaster includes this Safety Block with
every complete rifle sold
A2 Competition “Flip” Sight • 4 Piece Set
• Shipped with One Micro-Aperturee $2.50 (SBBFI)
zes:
• Choose from these 4 Aperture sizes:
.036" (CGF36) / .040" (CGF40) / Lower Receiver Safety Block with Flag
Fllag
lag
.046" (CGF46) / .052" (CGF52)
• Similar to the safety block above, this
$26.50 improved model adds a safety flag that
shows out of the open ejection port
UVEX Sharp-Shooter Safety $8.50 (SB16F)
Eyewear – Includes Free Earplugs
• These tough, sporty, and lightweight Uvex Shooting
Glasses protect both your eyes and your ears AR15/M16 Lower Receiver Safety Block
• Polycarbonate uni-lens blocks 99.9% of harmful • This bright yellow safety block locks into
ultraviolet radiation from the sun, and is “Ultradura” the magazine well when the bolt is retractedd
hardcoated to guard against abrasion and scratching and indicates a safe weapon
• They're tough enough to meet ANSI Z87.1-1989 $7.50 (SB16)
and OSHA guidelines, and their wrap-around design
provides excellent peripheral vision Single-Shot Magazine Follower
• Black poly-carbonate frames feature adjustments
for temple length and tilt for a custom fit • A blue plastic follower that installs easily inside
most “AR” type .223/5.56mm magazines nes
• Each pair of Uvex glasses includes Shooters Earplugs
warranted to reduce noise by 30 decibels (ANSI test • Allows single shot loading of extra
S3.19-1974) long competition handloads that won’t
function in regular magazines
• Three different lens colors available: clear; amber,
and espresso • Magazine not included
• Great eye and ear protection at a great price $13.95 (SS-FOL)
• UVEX Sharp-Shooter Safety Eyewear with
Free Earplugs included Sinclair International Sight
Espresso Lens and Muzzle Cover Set
$12.95 (R-03513) • Often seen on the DCM ready line, these popular
Amber Lens protective covers are molded from durable bright
$12.95 (R-03512)
yellow vinyl to protect “sight zero”
• To keep dirt out of the muzzle, and to offer high visibility
• Set includes Front and Rear Sight Covers and two
sizes of Muzzle Guard Covers – one for rifles with
flash suppressors and another for rifles with plain
competition crowned muzzles
Peltor President Hearing Protector $14.95 (14-200)
14-200)

• Peltor’s President model features exclusive liquid


foam ear cushions that are designed for all-day comfort
and the padded stainless steel wire headband and
generously sized earcups automaticallyy
self-align for perfect fit and protection
ction
• The President offers a noise Chamber Ch
Checker
k S Safety Flag
reduction rating of 24 decibels, $2.50 (CC Chamber Check)
and its earcups can be adjusted
in height from the headband • Tough yellow plastic
• The headband will fold down flag slips into the
around the earcups for chamber
compact storage • Close the bolt, and it
clearly shows your
$24.95 (AOS97069) rifle’s range-safe status

www.bushmaster.com 47
Competition Rifle Parts

Turner Saddlery Leather Creedmoor Deluxe Cart Stool and


bag not
Competition Sling Conversion Kit included.
• National Match Police Tactical • A quality kit that attaches to the
Rifle Sling is premium quality, black, 11 oz. strap Creedmoor Deluxe Shooting
leather – 54" in length with numbered holes Stool above to add easy rolling
• Mil Spec Parkerized steel hardware and copper rivets portability and a compact size
• Keepers are 7/8" wide and hand stitched when folded down
$74.50 (TS-NMPTRS) • Machined from 3/8" bar stock
aluminum, and the finest heavy
duty hardware and wheels
Creedmoor Deluxe Service Rifle Shooting Stool • Folds down in seconds for car
• Custom sewn by Creedmoor for Bushmaster trunk stowage, or disassembles
of Red Cordura with Black webbing and the easily to fit in a standard suitcase
Bushmaster Snake Logo as the longest piece is only 23"
• Carry all your “necessaries” in the handy hanging $124.95 (BFI-Cartcon)
compartmentalized bag – accessible through half
moon YKK zippered openings on both sides
Creedmoor Bushmaster Roll-Up Shooting Mat
• Carry up to four AR-15 Magazines in the outside pouches
– protected from dirt and rain with a Velcro flap • A popular – and necessary – part of High Power
• A zippered pocket above the magazine pouch accom- Competition gear, is this Roll-Up Shooting Mat done
modates your score book, and large outside pockets on in Bushmaster colors by Creedmoor Sports
three other sides offer huge storage capacity • Features a waterproof vinyl bottom in Bushmaster Black,
• Carrying Bag is 12.5" tall x 11" and Cordura nylon top in Bushmaster
wide x 12.5" deep, and overall
rall Red with our snake logo embroidered
weight is only 6 lbs on for maximum visibility
• Oversize textured rubber elbow pads
$69.95 (BFI-N051)
• Mat rolls up for convenient storage
and carry
Shooting Stool • Dimensions are 29.5" wide x 68" long,
Shoulder Strap and weight is approx. 8 lbs
• A convenient, 1.5" wide $79.95 (BFI-N040)
black polypropylene
webbing shoulder carrying
ooting Stool
strap for the Creedmoor Shooting Creedmoor Bushmaster
• Weight – 1 lb
Hard Back Heavy Cordura Shooting Coat
$5.95 (BFI-N026) • Creedmoor Sports’ most popular shooting jacket –
sewn in Bushmaster’s Red & Black colors of heavy
Cordura material – ideal for High Power or Smallbore
Creedmoor Shooting Equipment Rain Cover Competition Shooting
• This cover was designed so the competitor can saddle • A stiff interior center back panel of heavy cotton canvas
his rifle and gear on the Shooting Stool above for protec- give it the “hard-back” name, and provide maximum
tion against the nastiest weather, or potential tampering back support for the standing position
• Black nylon pack cloth, it can be secured with its own • Custom sewn to fit the individual shooter (male or
strap around a shooting stool female), and is available in sizes 34 thru 48 – for the
• Weight – 2 lbs right or left handed competitor
$29.95 (BFI-N045) • To achieve an exact fit, Bushmaster Sales people will
refer you to Creedmoor’s expert tailoring staff who will
guide you through the fittingng process
Creedmoor Rifle Data Score Book
• Choose from standard or tapered
• Essential data is arranged in a simple check off format cut, and you’ll have to provide
vide exact
with enlarged target overlays (double overlays for 200 measurements around your ur chest
and 300 yard rapid fire stages) (under armpits) and around nd
• Ample pages for 200/300/600 and 1000 yard shooting – stomach (widest point)
in a convenient 8.5" x 5.5" spiral bound format • Specific alterations to
$8.95 (BFI-N075) achieve perfect sleeve andd
body length should be
discussed with Creedmoor or
$310.95 (BFI-N002)
For Extra Large Sizes
(50 - 52 - 54) Add $20.00

48 Orders 24 Hrs: 1.800.998.7928


Sights/Scopes/Mounts

A1 Round Front Sight Post 1/2 M.O.A. Rear Sight Assembly


(8448572) $3.95 for the A3 Removable Carryry
• Original M16A1 round post Handle $53.50 (AR A3 RSA)

A1 Rear Sight Assembly Trijicon Luminous


(A1 RSITE ASSY) $12.95 Tritium Front Sight Post
• The original M16A1 configuration – (CP-25F) $57.95
adjustable with A1 sight tool or bullet tip • AR type front sight post is
functionally identical to the standard
t d d front
f t sight
i ht postt
A1 Sight Aperture . . . . . . . . . . . . . . . . . . . . . . . . . (8448539) $6.50
A1 Windage Screw . . . . . . . . . . . . . . . . . . . . . . . . (8448534) $3.15
and fits either A1 or A2 models and includes Sight Tool
A1 Windage Drum . . . . . . . . . . . . . . . . . . . . . . . . (8448535) $3.15 • Illumination from the Tritium inserts are guaranteed
Rear Sight Flat Blade Spring . . . . . . . . . . . . . . . . (8448536) $ .55 for 10 years by Trijicon
A1 Windage Drum Detente . . . . . . . . . . . . . . . . . (8448537) $ .55
A1 Windage Drum Roll Pin . . . . . . . . . . . . . . (MS16562-96) $ .55
A1 Drum Detente Spring . . . . . . . . . . . . . . . . . . . . (8448538) $ .55 Trijicon Rear Sight Aperture
• An effective ghost ring style flip-up aperture for the AR
Williams Fire Sight for AR15/M16 • Houses two Tritium inserts in the larger aperture
• This front sight design incorporates a light gathering $38.00 (CP-25R)
element (the tubular piece that mounts along front edge
of the AR sight base) for low light situations
Trijicon Tritium Sight Set (CP-25) $89.95
• The assembly is elevation adjustable, and all sight
pieces are CNC machined of black • Both Front and Rear Sights as shown above, plus
finished aluminum Front Sight Detent and A1/A2 Sight Adjustment Tool
• No drilling or tapping is required
red
for installation on your front Trijicon TA51 Mount
sight base for ACOG
$42.50 (9349054FSB-WFS) • Knurled thumbnuts allow
quick installation/removall on mil. spec
Front Sight Replacement / Repair Parts
Front Sight Detent… . . . . . . . . . . . . . . . . . . . . . . (8448573) $1.50 • Picatinny rail flat-tops
Front Sight Detent Spring… . . . . . . . . . . . . . . . . . (8448574) $ .85 • The ACOG Scope mounts into this with two screws –
Front Sight Taper Pin . . . . . . . . . . . . . . . . . . (9349054BTP) $1.00 use Loctite to keep it from “shooting loose”
$84.95 (TA51)
A51)
Front Sight Replacement / Repair Parts
Rear Sight Elevation Index . . . . . . . . . . . . . . . . . .(9349066) $7.50
Rear Sight Elevation Index Screw . . . . . . . . . . . (9349065) $1.00 A B C
Rear Sight Elevation Knob . . . . . . . . . . . . . . . . . . (9349067) $6.50
Rear Sight Elevation Spring . . . . . . . . . . . . . . . . (9349070) $2.25
Rear Sight Elevation Spring Pin . . . . . . . . . . (MS16562-121) $ .55
Rear Sight Helical Spring . . . . . . . . . . . . (9349069) $ .55 [3 req’d]
Rear Sight Ball Bearing . . . . . . . .(MS19060-4808) $ .55 [3 req’d]
Rear Sight Windage Knob. . . . . . . . . . . . . . . . . . (9349077) $6.50
Rear Sight Windage Screw . . . . . . . . . . . . . . . . (9349076) $4.50
Rear Sight Windage Knob Pin . . . . . . . . . . . . (MS16562-98) $ .55
Rear Sight Flat Blade Spring . . . . . . . . . . . . . . . . (8448536) $ .55 KNS Precision Front Sights
Rear Sight Flip-up Aperture . . . . . . . . . . . . . . . . . (9349075) $8.50
Rear Sight Base . . . . . . . . . . . . . . . . . . . . . . . . (9349074) $23.50 • Quality replacement front sights for the AR15/M16
offering .010 diam. crosshair wires for a precise sight
picture and hooding for reduced glare
Adjustment Knob for A1 Rear Sight
• Tactical Model Dual Range sight (right) offers an adjust-
• Knob converts the A1 rear sight to the latest able elevation dot for close range targets below the
M16A1E1 configuration long range crosshairs
• Phosphate finished steel knob is knurled for quick A. Standard Model . . . . . . . . . . . . . . . . . . . . . . . . . . (KNS1) $37.95
adjustment (no sight tool needed) and more precise B. Wide Hood Model . . . . . . . . . . . . . . . . . . . . . . . . . (KNS2) $37.95
half-click calibration C. Tactical Model . . . . . . . . . . . . . . . . . . . . . . . . . . . (KNS3) $52.95
$9.95 (LMT-001K)

Complete A1 Rear Sight Assembly


with our A1 Adjustment Knob
• Includes Knob, A1 Sight Aperture, A1 A2 Squaree Front Sight Post
Windage Screw, Flat Spring, Ball, • Standard M16A2 steel square post design
Spring and Roll Pin $5.50 (9349056)
$14.95 (A1-RSIGHT-KIT)
www.bushmaster.com 49
Sights/Scopes/Mounts

A2 Front Sight Post for Flat-Top Colts Aimpoint® CompM3 Sight


• Colt A3 Removable Carry Handle Sights are The Aimpoint Comp3 Passive Red Dot Collimator
taller than A1& A2 Rear Sights, and Reflex Sight offers has capabilities not found in
require an .040” taller Front Sight Post
st other
er sighting systems
• Also for use with Swan Sleeves &
ARMS #40 sight
$5.50 (9349056-M)

Aluminum Scope Mount


• Anodized, machined aluminum,
“see-thru” Picatinny rail mount (Weaver also)
which allows use of existing iron sights
• Attaches to the carry handle with a thumbnut
$21.95 (RAY-002) Features include:
• Compatibility with every generation of NVD
• ACET Technology allowing 50,000 hours of operation
NEW A.R.M.S. Folding Front Sightss on one single battery (on setting 7 of 10 - Battery Type:
• Solves the problem of trying to fold the 3 Volt Lithium battery included – type 2L76 or L1/3N)
well known triangle shape of the • 500,000 hours of use on NVD setting
conventional non folding front sights • Magnification 1X - Reticle Size: 2 MoA
• Barrel mounted in place • Unequalled light transmission
• Utilizes a rugged spring loaded angled
gled • Submersible to 45 meters (135 feet)
support system to eliminate getting caught • Replaceable outer black rubber cover offering protection
up in brush and other combat hazards rds and an additional stealth factor
• Also uses the standard front sight post • Rugged, durable construction unaffected by extreme
$147.50 (ARMS 41-B) weather conditions
$153.50 (ARMS 41-BL) Includes lug • Unlimited field of view, Unlimited eye relief, Parallax-free
• No laser emissions that could be harmful to your eyes
• Mechanical switch for speed and reliability
ARMS #22M68 Ring Mount
• Increased aiming confidence
for Aimpoint® CompM3
• Reduced training time and ammunition
• A rugged ARMS Mount designed
• Switch - Dot Brightness - 10 settings – 4 NVD, 6 Daylight
with a wide clamping cradle for the CompM3
• Body: Extruded, high strength aluminum, hard anodized,
• It features a single ARMS quick throw lever locking
with dark graphite gray non-glare finish
system to guarantee repeat zero on any Picatinny
Rail – solid, quick, easy to mount or remove • Lens Covers of black, non-glare thermoplastic elastomer
• The “no-mar”pad built into the • Adjustments: 1 click =10 mm at 80 meters = 13 mm at
throw lever protects the Picatinny 100 meters = 1⁄2" at 100 yds
rail’s edges and the mount’s two • Length – 130 mm (5.1" ) Width/height – 55 mm x 55
pieces can be separated for use mm (2.2" x 2.2") Weight – include lens covers and
with the Cantilever Spacer (at protective rubber shroud – 270 grams (9.5 oz)
right) to match the CompM3 $556.00 (11408)
with the 3X Mag Module above
$138.00 (10950)

Aimpoint® SRP-M Quick Detach Mount for


ARMS #22M68 Cantilever Extension Comp M3 Sight
• Designed to align the Aimpoint® CompM3 sight with the • A solid, simple 30mm wide-ring high mount with a
3XMag Module when used with the ARMS #22M68 Ring large knurled thumbnut for easy on / easy off attachment
Mount at right. Low std. height allows perfect Red Dot to any MIL-Std 1913 Picatinny Rail
a
cowitnessing on M16/M4 models • Optical center over the top of
• Machined steel with grey phosphate finish the Picatinny rail is 26.1mm
(1137) $35.00 (+/- 0.1 mm) – may require a
riser block for sighting over a
standard AR front sight
$29.00 (10830)

50 Orders 24 Hrs: 1.800.998.7928


Aimpoint® 3XMag Magnifying Module Spacer for Aimpoint®
• Compatible with the CompM3 Sight for maximum TwistMount
flexibility in the field • A companion piece to the TwistMount designed for
• When combined with Aimpoint’s patented TwistMount “co-witnessing” between 3X Magnifier andd CompM3
the 3XMag offers the ability to jump from CQB (Close on same plane railss
Quarters Battle) to semi-sniping and vice versa • It raises the 3XMagg in the
• Hunters can rapidly switch from non-magnifying to TwistMount to matchch the
magnifying while still being able to keep their Aimpoint height of the CompM3M3
sight on the firearm $11.00 (10566)
• The versatile 3XMag can also be used as a handheld
magnifying monocular for discrete observation
and identification

LEUPOLD® Mark 4 4.5-14 X 50mm LR/T


(Long Range/Tactical) M1 Scope
• Leupold® Mark 4® Long Range/Tactical riflescopes are
some of the most dependable, highest performing
riflescopes you’ll find anywhere
• The Leupold Index Matched Lens System® delivers
unsurpassed sharpness across the visual field,
Unique features include: brightness, and contrast for excellent target definition,
• Mounts on rail system behind Aimpoint sights with even in low light
Aimpoint TwistMount, or a regular 30mm ring • Side focus parallax adjustment offers fast, easy
• Provides extended range to the operator parallax focusing from 75 yards to infinity – from any
• No influence on point of impact – No need for shooting position
re-zeroing the sight • Finger-adjustable 1/4 M.o.A. windage and elevation
• Eye relief at 5° FOV 40 – 90 mm / at full adjustments are clearly defined with audible, tactile clicks
FOV 60 – 65 mm • Once sighted in, adjustment knobs can be zeroed
• Length – 110 mm (4.3") Width / Height – 44x41 mm • The Leupold® Mark 4® LR/T® is available with either the
(1.7" x 1.6") Weight – 200 g (7.1 oz) Mil Dot, or Duplex® reticle
• Body’s bottom surface has 4 screw holes for other • The Mil Dot reticle provides accuracy of range estimation
mounting alternatives for hunters and target shooters
• Body: Anodized aluminum, dark grey, rubber covered • 30mm maintube offers incredible strength and allows for
$535.00 (11324) the greater range of windage and elevation adjustment
• Flip-open lens covers are standard issue with each
Mark 4 LR/T
• Weight is 22 oz. / Overall Length: 12.5" / FOV @
100 yds. - 19'
LEUPOLD® Mark 4 4.5-14 X 50mm LR/T M1
Scope w. Duplex Reticle. . . . . . . . . . . . . . . . . . . . (54660) $1,219.99
Aimpoint® TwistMount for 3x Magnifer LEUPOLD® Mark 4 4.5-14 X 50mm LR/T M1
• The recommended mount for the 3XMag is this Scope w. Mil Dot Reticle . . . . . . . . . . . . . . . . . . . (54560) $1,374.99
Aimpoint Twist Mount – allows for qquick
attachment and detachment
ment
• Fits any MIL-Std 1913
Picatinny Rail
$164.00 (11355)

www.bushmaster.com 51
Sights/Scopes/Mounts

Leupold® Mark 4® EOTech 512 Holographic Diffraction


Steel Scope Rings Sight (HDS)
• Rugged, solid steel construction, and highly • The Model 512 Sight has become EOTech’s most
recoil resistant popular sight in the commercial market as it will run
• Mount easily onto any Picatinny rail on 2 AA batteries (lithium, alkaline [included], or
• Sold per pair rechargeable) for 1100 hours continuous at a reticle
brightness setting of 12 (20 settings total)
Leupold Mark 4® 30mm Scope Rings -
Medium Height . . . . . . . . . . . . . . . . . . . . . . . . . . .(61049) $185.00 • It mounts to any Picatinny rail standard on the flattop
Leupold Mark 4® 30mm Scope Rings - receiver AR15, M16 or M4 type weapon, or any Weaver
High Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(60699) $185.00 dovetail rail, with an integral mounting mechanism
tightened by means of a large knurled thumbscrew
• Mounting on an AR15, M16 or M4 fixed carry handle
requires addition of a Picatinny Rail mount (see Part#
RAY-002 or the ARMS #2 mount)
• The AR15/M16 and M4 flat-top mounting platform
provides for co-witnessing iron sights within the 512's
Heads Up Display while maintaining the operator’s
critical cheek weld position. The Sight’s Reticle offers
a 65 MOA ring with a 1 MOA dot
• Windage and Elevation adjustments are made by
means of large slotted screws on the side of the case
(use a coin, screwdriver or spent casing)
LEUPOLD® Mark 4 Fixed 16 Power Scope • Eotech 512 Holographic Weapon Sight is equipped
16 X 40mm LR/T (Long Range/Tactical) with the latest membrane switch design to provide
M1 Riflescope with Mil Dot Reticle excellent tactile response and positive snap feeling
upon depression of the switches
• Incredibly rugged, absolutely waterproof • Offers a convenient battery check feature so that if
• The Multicoat 4® lens system delivers extreme clarity battery power is less than 20%, the reticle will blink
from edge to edge of the visual field, outstanding on and off for 5 seconds
contrast, and a bright sight picture even in extreme • Automatically shut down after either 4 or 8 hours
low-light conditions depending upon which button (Up or Down) is used
• Side focus parallax adjustment for fast, easy to power it up
parallax focusing from 50 yards to infinity, from • EOTech offers a two year warranty against defects in
any shooting position workmanship or materials on the 512 Holographic Sight
• Finger-adjustable ¼ M.o.A. windage and elevation
$425.00 (EOT-512)
adjustments with audible, tactile clicks
• Once sighted in adjustment knobs can be zeroed
• Available with the Mil Dot Reticle to provide accuracy
of range estimation for hunters and target shooters
• The 30mm maintube offers incredible strength and
allows for the greater range of windage and elevation
adjustment (140 M.o.A. of elevation adjustment and
45 M.o.A. of windage adjustment)
• Flip-open lens covers are standard issue with each
Mark 4® LR/T Riflescope
• Rugged and absolutely waterproof, these LR/T
riflescopes helped to set the Leupold Mark 4
standards, and can withstand incredible abuse
• Weight is 22.5 oz. / Overall Length: 13.1" / FOV @
100 yds. - 6.8'. Finished in Matte Black
$1,874.99 (50541)
Riser Blocks for Picatinny
Rail Flat-tops
• Black anodized aluminum riser blocks offer extra
height for proper sight picture
ure
and comfortable cheek weldd
$13.95 each (LW-RB)

52 Orders 24 Hrs: 1.800.998.7928


EOTech Model 552 HDS Sight EOTech 510 HDS Sight
• Rugged quality of all their models, but incorporates the • Similar to Model 512 on previous page, but powered
convenience of common AA battery power with a compact N type battery for space savings
• In normal operation, there are 20 reticle brightness • In CQB (Close Quarter Battle) environments, this
settings in either 4 or 8 hour auto-shutdown modes. revolutionary optic delivers speed gains in initial
With “heads-up display” technology adapted from F-14 weapon presentation, accuracy in multiple target
Tomcat Fighters, the Holographic Diffraction Sight is the situations, uncompromised use of peripheral vision,
first electro-optic sighting system to apply holographic and leaves no muzzle signature (The projected reticle
technology to small arms is visible only to operator)
• The Model 552 features a night vision mode capability • The HDS locks onto the target as fast as your eyes
which can only be used with night vision equipment do, and has been designed and tested to provide
such as ANSPV7 Goggles or ANSPV14 Night Vision consistent, reliable performance even in the most
Scope/Goggle (must be used with night vision equip- hostile operational environments
ment to achieve full Night Vision Mode compatibility • It is waterproof, fogproof, shockproof, and
- but can be used as a normal holographic sight) temperature proof
• With this system, 1 M.o.A. groupings can be achieved • The Heads Up Display is constructed with 3 layer,
out to 300 yards 3/16" thick shatterproof
p laminate glass
g for durabilityy –
• Windage and Elevation can be adjusted in 1/4 M.o.A. additional
nal display protection
increments is provided
ded by a rugged
• With state of the art digital electronics design, the "roll bar"
r" type hood
EOTech is waterproof, fog proof and shockproof • 1 M.o.A.. reticle
• Twenty levels ensure proper brightness control in either aiming dot
low light or bright sunlight $389.00 (EOT-510)
OT-510)
• A microprocessor provides automatic battery check
indicator, up/down brightness scrolling and program-
mable auto shut down
• Electronics are encapsulated in shock absorbing resin
compound, and the sight’s tubeless design provides an
unobstructed field of view for two-eyes-open shooting The Trijicon A.C.O.G. (Advanced Combat
• Simply look through the 1/4" thick shatterproof laminate Optical GunSight) for AR15/M16
window, place the reticle image on the target and shoot
• 1 M.o.A. aiming dot reticle patterns are instantly visible • The finest optical design, 100% U.S. made components
in even the lowest light, instinctive to center regardless and Mil-C-14806A multi-layer coated glass elements
of the shooting angle or position, and remain in view make the ACOG the ultimate telescopic sight
between shots • Tritium elements cause the black daytime reticle in the
• The EOTech HDS will mount to any Picatinny ACOG 4x32 to glow red at night and in low light
configuration rail • A forged aircraft aluminum housing is precision machined
and hard anodized to match the finish of the M16
$499.00 (EOT-552)
(
• The ACOG’s unique internal adjustment system
(only the prism housing moves) makes this the most
rugged scope available – it will withstand exposure
to temperature extremes, salt spray, fog, fungus,
humidity, sand, dust, shock, vibration and aerospace
seals make the ACOG waterproof
• A see-through channel in the integral base permits
use of the iron sights while the scope is mounted.
Attachment to the rifle’s carry handle is with one or
(optionally) two screws
• Trijicon ACOGs are adaptable to H&K; Sig 550; Beretta
AR 70/90 with various A.R.M.S. adaptors. Dovetail
adaptors for popular hunting/target rifles are available
EOTech Model 553 SOCOM Model HDS Sight $990.00 (TA01)
• Similar to the Model 552 with upgraded switch mecha-
nism; submersible to 66 feet; includes 7mm mounting
base with dual ARMS Throw Lever mechanisms to
speed installation and removal with no loss of zero
• Extensively tested by US SpecOps Command
$675.00 (EOT-553)

www.bushmaster.com 53
Sights/Scopes/Mounts

NEW Trijicon AccuPoint Scope Trijicon ACOG TA01NSN Special Forces Sight
• Fast and easy target acquisition • This Trijicon ACOG fits the AR15/M16 “flat-top” rifles
• Extends hunting time in low light conditions and includes the TA51 Flat-top Mount
• Automatically adjusts brightness • ACOG is an acronym for Advanced Combat Optical
• Multi-coated lenses for superior clarity Gunsight – and this one is the choice of many Special
• Dual illuminated using fiber optics and Forces groups
tritium (no batteries needed) • It has been designed to withstand shock, vibration,
• Waterproof to 10 feet temperature extremes, water, dust, sand and hard
$750.00 (TRZO) surface drops
• Unique modifications to this model include an integral
rear ghost ring aperture and a tritium glow-in-the-dark
front sight for close combat back-up sighting
• This model’s TA51 Mount also works with the Trijicon
TA01, and is sold separately on previous page
$1115.00
5 00 (TA01NSN)
( 0 S )
Simmons AETEC® Master Series
2.8
2 8 - 10 x 44mm
44 Scope
S
• Simmons' new Master Series™ AETEC® is one
of the most innovative, high performance scopes
ever designed
• Featuring Simmons' patented TrueZero™ flex
erector system and new windage and elevation dials,
the new AETEC delivers remarkably consistent shot
placement and precise MOA adjustments throughout
the entire range
• Add Simmons' new QTA™ Quick Target Acquisition
eyepiece, which delivers a constant minimum 3.5 MeproLight® M-21 Day/Night
inches of eye relief and one of the most generous eye Illuminated Reflex Sight
boxes in the industry, and you’ll have the confidence • The right solution for military, police and sportsmen
to know that your AETEC will get the job done from when rugged construction and reliability count
shot to shot and season to season • The Mepro 21 is a maintenance free, dual illuminated,
• The aspherical lens system found on this quality scope red dot reflex sight especially designed for quick
was first used on expensive binoculars and cameras and instinctive accurate shooting – perfect while
• True one piece tube construction is utilized on the move in close quarters where the use of
• It is waterproof, fog proof and weatherproof, has both eyes is critical
Suregrip™ rubber coated adjusting knobs, and • The Mepro 21 provides instant, all light aiming
Hydroshield™ water and condensation resistant without batteries
lens coatings. • Illumination for the aiming point comes from a fiber
optic collector in daylight situations and from a
Innovations to the Simmons Aetec Scope include:
miniature, self-powered tritium light source at night
• Simmons’ exclusive true one-piece tube construction
for increased mounting area • Mounting on your weapon is easy with dual quick
release levers offering solid attachment onto any
• Aspherical lens technology and fully multi-coated Picatinny rail
optics for the brightest, sharpest image in its class
• Weight is 13.23 oz. / Length: 4.53" / Width: 1.65" /
• HydroShield™ lens coating helps maintain a clear Height: 2.13"
sight picture – regardless of weather conditions
• Available in two different reticle patterns
• New SureGrip™ rubber surfaces on all eyepieces
and side-focus parallax adjustments make the AETEC MeproLight® M-21 Day/Night Illuminated Reflex Sight
with Bulls Eye Reticle . . . . . . . . . . . . . . . . . . . (ML96630) $580.00
one of the easiest scopes to adjust in the field MeproLight® M-21 Day/Night Illuminated Reflex Sight
$189.95 (2101) with Open X Reticle . . . . . . . . . . . . . . . . . . . . . (ML96730) $580.00

54 Orders 24 Hrs: 1.800.998.7928


Leatherwood Camputer M-1000 2.5X - 10X A.R.T. Leatherwood Hi-Lux
(Automatic Ranging & Trajectory) Riflescope 50mm Red Dot Rifle Sight
• Adaptable to a variety of calibers from .223 to .50 BMG • This larger Leatherwood Red Dot Sight
• All the shooter needs to do is place the reticle on offers a 50mm viewing area with an 88 foot
the target, zoom in to “frame” an area of known size Field of View at 100 yards
(i.e. the 18” height of a buck’s chest cavity), aim, • An integral Picatinny type rail mount with large
and squeeze the trigger thumb screw clamp nuts makes installation/removal
• The M-1000 features Multi-Dial Rings for up to 4 easy and offers excellent repeat zero
different zeroes, a new Picatinny mount with built-in • 1 M.o.A. red dot system is powered by an ECR2032
windage adjustment, and a “No Math” Mil Dot reticle lithium battery (included)
• Construction is of quality optical glass, aircraft • Dot brightness is controlled by a twelve step rotating
aluminum, with clear control knob increment markings, switch – windage and elevation adjustments are
and a non reflective finish built in, and covered by protective caps
$459.00 (LW-44) • Limited Lifetime Warranty
$105.95 (LW
(LW-RD)
RD)

Leatherwood Hi-Lux 30mm Red Dot Sight


• This compact Red Dot Sight for 5.56mm / .223 Rem. Leatherwood M-1200 6-24x50mm
Caliber, and other Picatinny or Weaver Rail applications, Camputer ART Riflescope for .308 - .50 BMG
was designed to offer quick target acquisition, and easy
“two eyes open” shooting • For ranges from 300 to 1200 meters (200m range
• The non-magnifying Leatherwood Hi-Lux 30mm Red setting also provided)
Dot features a 1 M.o.A. Dot, highest quality optical • 50mm adjustable objective –“No Math” Mil Dot
glass, elevation and windage adjustments,heavy aircraft reticle – air to glass surfaces are fully multi-coated
aluminum construction, and a matte black non- for brilliant high resolution – adjustments are tactical
reflective finish type with 1/8 minute clicks
• The brightness of the red sighting dot is controlled by • Includes rings and a clamp-on flat-top mount for
an 11 position rheostat on the top of the sight with Picatinny and Weaver rails
clearly marked increments on the control knob $599.00 (LW-50)
• long-lasting 3 Volt Type ECR2032 lithium battery
• Ribbed rubber rings protect the sight body against
knocks and drops, and mounting on your rifle’s Picat-
inny/Weaver rail is made simple with the two knurled
thumbnuts on the sight’s integral base A.R.M.S. #19 Weaver/Stanag
• Limited Lifetime Warranty Throw Lever Mount
$83.95 (LW-RD30) • Mount scopes, sights, etc. directly onto the
A3 flat-top receiver with guaranteed repeat zero
or, with an ARMS#2 carry handle mount,
interfaces to M16A1/A2/M4
$159.95 (ARMS 19)

www.bushmaster.com 55
Sights/Scopes/Mounts

A.R.M.S. #19A Throw Lever Channel Mount A.R.M.S. #40L Low Profile Flip-Up Rear Sight
for ACOG Sights • A design improvement on the ARMS #40 below left,
• The “channel” mounts Trijicon ACOG Scopes to this sight achieves a super low profile (.610 height
mil. spec. Picatinny/Weaver rails with convenient when folded) and uses the same rugged lock down
A.R.M.S. repeat zero throw levers (positioned on left quick release lever and “no knockdown” stainless
side so as not to obstruct the rifle’s ejection port) steel retention spring
$170.00 (ARMS 19 A) • A unique “sandwiched” dual aperture flip-up combines
a stationary close combat aperture and a 300 meter
long distance accuracy aperture
• The automatic zero stainless steel retention plate
and clamping bar/pin won't rust, other parts are
matte black finished
• This sight includes a newly designed, miniaturized
windage adjustment knob, will fit any mil. spec.
flat-top Picatinny rail, and is as robust as the rest
A.R.M.S. #2 Scope Mount for M16A1/A2 of the ARMS #40 series
• It carries U.S. Pat. No. 5,533,292
• An excellent handle mount type scope platform for the
AR15/M16 rifles featuring the Swan universal mounting Note: This sight is designed to work in conjunction with the
A.R.M.S. SIR System forends in our Handguards Section.
platform which accepts most all current military and Due to the aperture height on this sight, you should order the
police sighting systems, including NATO Stanag and .040 taller Front Sight Post
Weaver type rails, without the need for adaptors
$119.95 ((ARMS 40L))
• Other features include: see-thru channel for iron sight
use; fast positioning with fixed toggle bolt; self-locking
thumbnut – will not loosen; repeatable zero hold
$68.95
95 (5855-01-299-777)
(5855-01 2

A.R.M.S. #40 Standard A2 Flip-Up Rear Sight


A.R.M.S. #5 MultiBase • This U.S. Patented Flip-Up Rear Sight locks down with
• A quick detach, multiple eye relief mount featuring a a quick release lever when not in use (shown in both
spring loaded clamping bar and NATO Stanag & Weaver deployed and lock-down positions)
rail fastening • Its flip-up combines a 250-300 meter close combat
• Easily mounts to Picatinny/Weaver type rail or flat top aperture and a 500-600 meter aperture with a horizon
receiver with locking, captivated thumbnuts line feature that helps lead distant targets
$68.95 (ARMS 5)
• The automatic zero stainless steel retention plate and
clamping bar/pin won't rust, all other parts are matte-
black finished – fits any mil. spec. flat-top Picatinny rail
• This sight includes a newly designed, non-protruding,
windage adjustment knob
• Due to the aperture height on this sight, you should
order the .040 taller Front Sight Post
Note: This sight is designed to work in conjunction with the
A.R.M.S. SIR System forends shown in our Handguards Section
$116.95 (ARMS 40)

A.R.M.S. #37 Ring Insertss


• Steel inserts that allow use
of 1" diameter scopes
within 30mm ring sets
$29.00 (ARMS 37)

56 Orders 24 Hrs: 1.800.998.7928


A.R.M.S. #22 Throw Lever Rings A.R.M.S. #39A2 Bi-Level Rail
• Patented 30mm steel rings secured with A.R.M.S. • Mounts to M16A1 & A2 Carry Handle
dovetail system to an extruded aluminum platform for multiple combinations of attachments,
• “No-Mar” pads protect the rail and spring loaded levers and provides rigid support of the dovetail platform
act as shock absorbers – guaranteed repeat zero hold that is extended over the handguards
• Available in three heights: Low - 1/4" rise (ARMS 22L) • A “brush breaker” on the front will prevent branches
ium - 1/2
/ Medium 1/2" rise (ARMS 22M) / High - 3/4"
3/4 rrise from snagging under the rail, and a “see-thru” channel
(ARMS S 22H) in the #39A2 Upper Rail allows the use of existing iron
$123.50 per pair sights.Note: This Rail System will not mount on the A3
Removable Carryy Handle
$148.95 (ARMS 39)

Bushmaster Modular Accessories B.M.A.S. Folding Front Sight/Gas Block


System Detachable Front Flip Sight • An all steel Gas Block/Folding Front Sight Combination
and Three-Rail Gas Block easily actuated with the push of a button – locks in
the deployed position, it includes a standard AR front
• The B.M.A.S. Detachable Front Flip Sight (patent
sight post, detent and detent spring, and is the same
pending) clamps snugly on the gas block’s top
weight as a standard AR sight tower
Picatinny rail with socket head screws for repeat
zero every time. • Split design allows it to be mounted onto barrels
that already have pinned or welded muzzle brakes
• Machined from aircraft aluminum billet, it locks up
or suppressors – attaches easily with 4 cap screws
or flips down at the touch of a button. Standard
(use of Loctite is recommended)
A2 front sight post with spring and detent locking
system offers elevation zeroing just as with the • Includes Bayonet Lug and Sling Loop. Manganese
original M16A2 sight. Phosphate finished for protection, it is shown flipped up
in the foreground and folded in the shadowed image
The B.M.A.S. 3-Rail Gas Block can be ordered • This unit fits all standard AR-15 type barrels with a
on new barrels as a factory installed option, or we .750” diameter at Gas Port
can factory retrofit existing sight bases on .750"
$91.95 (YHM-9394)
YHM-9394)
or .625" diameter barrels.
• It’s three rails are in standard Picatinny configuration
to allow addition of flashlight or laser as side
"mounted accessories.
• The B.M.A.S. Three Rail Block is precision milled from
alloy steel; finished in black manganese phosphate;
and drilled and tapped on the bottom for the addition
of a sling swivel stud (Note: this stud is not intended
as a bipod mount).
B.M.A.S. Detachable
Front Flip-Up Sight only . . . . . . . . . . . . . . .(YHM-9371K) $77.50
B.M.A.S. Three-Rail Gas Block only . . . . . . .(YHM-9370) $56.50
Front Flip-Up Sight/Three-Rail
Gas Block SET . . . . . . . . . . . . . . . . . . . . .(YHM-9370K) $127.95
Three-Rail for .625" Barrel . . . . . . . . . . (YHM-9370-625) $56.50
Three-Rail
Three Rail Kit for .625"
.625 Barrel
Ba . . . . . . (YHM-9370-625K) $127.95 B.M.A.S. Fixed Clamp-on Front Sight
• A standard height front sight, this unit adds
ach
the convenience of a quick detach
knurled thumbnut and clampingg bar
for easy removal.
ment
• Returns to zero upon reattachment
and includes standard AR Front
Sight Post and Detent System –
adjustable for elevation.
$50.50 (YHM-9495K)

www.bushmaster.com 57
Sights/Scopes/Mounts

B.M.A.S. Low Profile Clamp-on Front Sight B.M.A.S. Clamp-on Rear Flip-Up Sight
• A low profile Front Sight of quality alloy
lloy • An aircraft grade aluminum, flip-up auxiliary sight
steel that folds flat at the touch of itss featuring dual apertures
side button to allow clearance for any ny • 1/2 M.o.A. windage adjustment
large bell scope • Black anodized finish
• It flips up to lock in the deployed • Convenient right hand adjustment knob and full
position with zero repeatability, and height sight apertures
includes a standard, AR Front Sight
Post and Detent System. Black • Height when folded is1/8" lower than similar designs
phosphate finished – made in USA $79.95 (YHM-9440)
HM-9440)
$78.95 (YHM-9584K)

Bushmaster Modular Accessories System


(B.M.A.S.) Front Flip Sight for V Match Rifles
and Carbines
• A high quality front sight that clamps around the V
Match milled sight base/gas block – designed to be
used with any open iron rear sight
• This patent pending Front Flip Sight is machined from
aircraft aluminum with an anodized finish, installs with
an Allen wrench, locks up or down with a push button
and is elevation adjustable
ble B.M.A.S. Scope Risers
• A standard front sight • Increase scope mounting height on flat-top style
post is included, and AR‘s by 1/2" to achieve proper cheek weld
the base is drilled • Hard anodized aircraft aluminum – fit all Picatinny/
and tapped for our Weaver rails
B.M.A.S. Sling Swivel • Two required for scope mounting – sold individually
Stud (see YHM-9364) A. 3/4" Long . . . . . . . . . . . . . . . . . . . . . . . . . (YHM-9490) $13.50
$106.50 (YHM-9360K) B. 1 1/4" Long . . . . . . . . . . . . . . . . . . . . . . . . (YHM-226) $15.95

B.M.A.S. Flip Sight


Sling Swivel Stud
• Threaded 3/8 x 24 to fit the V Match Front A B
Flip Sight above – accepts any Q.D. type
sling swivel
$4.95 (YHM-9364)

B.M.A.S. Rail Extensions – 4"-7"-11.25"


B.M.A.S. Low Profile Rear Flip Sight Lengths
• This flip-up rear sight for flat-top receivers features • These precision machined Rail Extensions – in standard
a steel base, a quick release thumb screw, and an Picatinny rail dimensions – mount on all flat-top Upper
aluminum stem Receivers to elevate the mounting surface approx. 1/2"
• Locks up (deployed position) with the push of a button • The two longer lengths can join and solidify the Up-
and folds down to .840 inches above the upper receiver per Receiver to any Four Rail Forend offering the extra
• Windage adjustment is 1/2 M.O.A., and a dual aperture mounting surface length necessary for very large/long
rear peep is fitted scopes or “scout-style” mounting
• Mounts to any Picatinny rail and will “co-witness” • All 3 Rails offers the convenience of quick detach/reat-
with standard AR15, M16 and M4 type front sights tach with knurled thumbnuts
• Once sighted-in, itt can be removed and • Anodize finished machined aluminum with phosphated
reattached with noo loss of “zero” steel thumbscrews and clamping bars
• Fits behind A.R.M.S.
M.S. S.I.R. 4" Q. D. Rail Extension . . . . . . . . . . . . . . . . . (YHM-9595) $39.95
7" Q. D. Rail Extension . . . . . . . . . . . . . . . . . (YHM-9592) $62.95
System foreends 1.25" Q. D. Rail Exte
11.25" Extension . . . . . . . . . . . . . (YHM-9590) $86.95
$91.95 (YHM-9680)

58 Orders 24 Hrs: 1.800.998.7928


Bushmaster Modular Accessory System Bennie Cooley
Scope Riser Co-Witnessing Adjustable Mount
• This Riser solves problems of scope movement or • This optics mounting platform for the A2 Carry
rocking that might be encountered with individual Handle AR15/M16 is the most versatile co-witnessing
riser sections mounting system made
• A 5.25" Picatinny Rail Section mounts on any Flat-top • Vertically adjustable for easy alignment and custom
Upper to raise the platform 1/2" fitting of any red dot optic (EOTech Holosight, Trijicon
• Perfect on varmint rifles – accepts most types of Reflex, Aimpoint Comp or others) in relation to the iron
scopes, red dot sights, and other optics sights of the rifle. Mounts with a hex-head nut/threaded
• Machined from aircraft quality aluminum and hardcoat post, and height adjustments are made to the Picatinny
anodized to military specifications rail with 8/32 button head retaining screws and the
supplied 3/32" Allen wrench
$32.95
32.95 (YHM-227A)
(YHM 227 )
$165.00 (EOT-12)

B.M.A.S. Angled Accessory Mounts


• Angled rail segments designed to mount various B.M.A.S. SuperLight
accessories at a 45° angle on a “flat-top” Upper Barrel Bushings
Receiver, or any multi-rail type forend • A set of thicker steel bushings too
• Useful for flashlights or laser aiming devices, or with a mounts the =Triple Rail Kit aboveve to
pair, you could mount a scope in an “offset” position the thinner Bushmaster SuperLight ght
and still retain iron sight use Barrels.
• Available in 3 different lengths: A - One Slot (3/4" $13.95 (YHM-640-4)
length); B - Three Slot (1 3/8" length); and C - Five Slot
(2 1/8" length)
• Machined from aircraft quality aluminum and finished in
matte black hard anodize, mount to your rail surface
with socket head screws B.M.A.S. Triple Mount Rail Kit
One Slot Mount (A) . . . . . . . . . . . . . . . . . . (YHM-9486A) $21.95 • A quality multi-purpose accessory mount that
Three Slot Mount (B) . . . . . . . . . . . . . . . . . (YHM-9690A) $26.50
Five Slot Mount (C) . . . . . . . . . . . . . . . . . . (YHM-9691A) $30.95
clamps to the barrel and fits around the front sight
with three separate rail surfaces to allow mounting
flashlights, bipod, laser sights, etc
A B C • Designed to fit both Post & Pre-Ban barrels (with
bayonet lug), there are insert bushings included
with this kit that allow fitting to either .720" diam.
rifle barrels (20"/24") or .740" diam. (14.5"/16")
carbine barrels
• This triple mount will accept all Picatinny/Weaver
base attachments, and is machined from high quality
aircraft aluminum with Allen head clamping screws.
Bushmaster A3 Type Removable Carry Handle Finished in black hard anodize to match rifle
with 1/2 M.o.A. Rear Sight $89.95
95 (YHM-639K)
• Add versatility to your “flat-top”– clamps solidly onto
the Picatinny Rail of any V Match or “Flat-top” Upper
Receiver with knurled thumbnuts, and includes an A2
Dual Aperture Rear Sight with 1/2 M.o.A. windage and
elevation adjustment
• Machined from aircraft aluminum forging, with steel
sight and clamp parts
$116.95
16.95 (9349063-9)

www.bushmaster.com 59
Sights/Scopes/Mounts

M203 Grenade Launcher Quadrant Sights


for A2 & A3 Type Rifles
• These are Government Issue Quadrant Sights for the
M203 Grenade Launcher
• Sights include a Flip-out Post & Aperture System,
combined with an elevating scale set in 25 meter incre-
ments from 50m to 400m
Aluminum Scope Ring Sets • There are models for both the A2 Solid Carry Handle
• Top quality, matte black finished ring sets to Rifles and Carbines, and the A3 Removable Carry
fit any Picatinny rail. U.S.A. made – heat treated alumi- Handle type (they are not interchangeable)
num with 8-32 socket head screws in 1" Low, Medium For A3 Removable Handle Rifles . . . . . . . . (12598114) $105.50
or High Profile horizontally split design For A2 Solid Carry Handle Rifles . . . . . . . . . . . (9346304) $81.95
• 30mm style is vertically split
• Wrench included with each set
Specify:
1" Low . . . . . . . . . . . . . . . . . . . . . . . . (W-20524) $15.95 per pair
1" Medium . . . . . . . . . . . . . . . . . . . . . (W-20515) $15.95 per pair
1" High . . . . . . . . . . . . . . . . . . . . . . . (W-20525) $15.95 per pair
30mm Medium . . . . . . . . . . . . . . . . . (W-20513) $15.95 per pair

Command Arms Tactical


Light Mounts
• These mounts will accept 1"
or 15/16" diameter flashlights
and hold them solidly onto your
rifle or carbine with an internal
rubberized pad-clamp
• It slides onto the M33 Handguard rail (page 35) –
or any Picatinny type rail – an locks in place with a
rugged push button mechanism
• Molded of high density black polymer
For Streamlight Scorpion and other 15/16" diameter B.M.A.S. Handguard Mounted Flip-up Sight
flashlights. • The Bushmaster Modular Accessories System
15/16" Tactical Light Mount . . . . . . . . . . . . .(FBS-FAS-3) $31.95 solution to a handguard mounted back-up iron sight
For Surefire & other 1" diameter tactical flashlights. is this low profile, front flip-up unit
1" Tactical Light Mount . . . . . . . . . . . . . . . . .(FBS-FAS-2) $31.95 • It attaches to any forend Picatinny rail, and folds down
out of line of sight at the push of a button
• It locks up in a deployed position, and mounts easily
with a large knurled thumb screw
Snap-on Forearm Light Mount
• Low profile, durable and lightweight all steel
• This heavy plastic base (shown installed, and construction – manganese phosphate finished –
separately) snaps onto AR-15/M16 Rifle Forends includes AR square post, detent and spring –
(won’t fit the CAR handguards) elevation adjustable just like the standard sight
• Detents grip the forend vent holes for a firm mount B.M.A.S. Handguard Mounted
• On the side, a rail segment is mounted which is Flip-up Sight . . . . . . . . . . . . . . . . . . . . . . . . (YHM-9627) $81.95
signed to accept a variety of tactical flashlights
designed
(HPM3)
M3) $31.95

60 Orders 24 Hrs: 1.800.998.7928


B.M.A.S. Flat-Top Fixed Rear Sight Kwik-Site See-Thru
• This AR15 type fixed Iron Sight offers the option of Scope Mount and
mounting optics further forward on the flattop rail Scope Ring Set
• The sight’s base is a heavy, black anodized aluminum • For A1 or A2 rifles with the solid carry handle, this
block – other parts are steel mount features a wide see-thru channel to enable
• Windage and elevation adjustments are 1/2 the use of existing open sights
(YHM-643K) $102.50 • Mounts to the handle with a large thumbnut
• A pair of 1" horizontally split scope rings is included
(KSN-M16) $53.95

NEW Cletus Front Sight Picatinny Rails


• Mounts on the bayonet lugs under your front sight
• Very useful for mounting items like: Lights, Vertical
Light & Laser Mounts for Bushmaster Grips and Sling Connectors
Carbon 15 Rifles and Pistols • Three options available:
• These Mounts clamp to the barrel fluting on 1) Without “ring”
Type 97 Pistols and Type 97 / 97S Rifles to offer 2) With “ring” for right handed shooters
mounting for various lights and lasers 3) With “big ring” for left handed shooters
A. Laser Mount Accepts (10003) $64.95
3/4" diameter laser sighting units. . . . . . . . .(AZ719) $26.95
B. Mag-Lite Flashlight Mount Holds
3/4" diameter lights. . . . . . . . . . . . . . . . . . . (AZ717L) $26.95
C. SureFire Mount Takes
1" diameter flashlights. . . . . . . . . . . . . . . . .(AZ718) $26.95
(Surefire recommends their #650 Universal Weapon Light)

A B C

www.bushmaster.com 61
Accessories

M7 Bayonet with M10 Scabbard


M4 Typpe
Handguuards w/ • Fits 20" & 14.5" Bbl. AR15/M16 and AR180
Heatshiields $34.95 (GC-BAYO SCAB KIT)

Piston
Housingg Carrier, Piston
Supporrt and Piston
Housing
Bolt
Operating Rod
O
Carrier
w Spring and
with
with
Upper Receiver
U
Striker M9 Bayonet with Scabbard
Guide Sleeve
Face
• Designed to serve as a bayonet, a fighting knife,
field knife and wire cutter
Bushmaster Gas Piston Retro-Fit Conversion • It fits many Bushmaster models as well as other
Kit for AR15/M4 type Carbines M16 and AR15 type rifles
• Features a heavy 7.25" steel blade fitted with a
Now you can easily add the Gas Piston System benefits checkered, black composite plastic handle
of reliability, ease of maintenance, ability to fire a wider
variety of ammunition, cooler running, and consistent • Black oxide finish blade to reduce glare, and includes
function with this Bushmaster Gas-Piston machined saw teeth on back edge
• Overall length is 14.5" (36.8 cm) and weight
• Patent Pending, short stroke piston conversion system is 28 oz. (.79 kg)
that includes all the necessary parts to convert your
$109.99
109.99 (GCC-M9 BLK BAYO)
gas impingement type carbine
• low maintenance piston housed within a tubular
structure that pins right into your existing front
sight base
• Vents the gases under the hand guard and away
from the operator.
• The high performance bolt carrier features increased
mass, an integral impact lug and specially designed
anti-wear features to protect your receiver
• Readily installed into your factory Upper Receiver NOTE: Bayonets are designed to fit only 14.5" & 20" Barrelled
Assembly without permanent modifications to Rifles, and will only work with certain Flash Suppressors / Muzzle
your carbine Brakes such as Birdcage types, Izzy Brakes; Phantoms; Mini &
Y-Comps. Consult Bushmaster Sales if you have questions about
• Supplied with the kit are Heat Shielded M4 (oval) a particular application.
Type Handguards designed specifically to withstand
rapid fire heat
• Fully functional for both semi-automatic and full-
automatic weapons, and can be easily installed at The Bushmaster Rifle Case
home with simple hand tools
• Economical storage, or travel protection for your
Why do the barrel and some parts (below) look so Bushmaster, or other firearms
discolored? Because this unit had just successfully • 47"x 9"x 3"dimensions, this case holds a full sized
completed – without failure – a 10,000 ROUND NON- AR15/M16 rifle, or a scope mounted AR with receivers
STOP ENDURANCE TEST! separated
$399.95 (GP-GSR) M4 Barrel • Shipping for 1st Case is $7.50 / Addtl. Cases: $6.00
$399.95 (GP-GSR-HB) Heavy Barrels each Bushmaster Rifle Case
$18.95 (Part #10483)

62 Orders 24 Hrs: 1.800.998.7928


Eagle Padded Rifle Cases for Bushmaster Blur Folder
AR Type Rifles & Other Firearms by Kershaw – A Ken Onion Design
• Each case features a lockable outside cargo compart- • Premium quality knife features a 13C26 stainless steel
ment; adjustable magazine pouches; reinforced 2" wide blade for strength and corrosion resistance
carrying handles; heavy duty YKK zippers; and a 2" wide, • Specifications: Blade Length – 3 3/8" (8.6 cm) / Closed
padded shoulder strap attached to welded steel D rings Length – 4 1/2" (11.3 cm) / Weight – 4.2 oz.
• These quality Eagle cases will fit most standard military $94.95 (1670RD)
type AR15/M16 rifles
Full Size Rifle Case . . . . . . . . . . . . . . . . . . . . . (RC-4123) $79.95
• Approx. internal dimensions: 40" x 11"
Carbine Sized Case . . . . . . . . . . . . . . . . . . . . . . (RC-36) $79.95
• Approx. Internal Dimensions: 36" x 11"
30" Carbine Sized Case . . . . . . . . . . . . . . . . . (RC-3223) $79.95 Bushmaster Sighting-in
• Fits FNC, LAR Para 30" & Tele AKs Targets
Extra Long Barrelled Rifle Case . . . . . . . . . . . (RC-4608) $79.95
$2.95 / Pkg. of 12 (QP-015K)
• Approx. Internal Dimensions: 45" x 10"
• This case will fit FAL 44 1/2" & LAR-HB 45" rifles.

Bushmaster Gift
Certificates
Bushmaster Logo Embroidered Carrying Cases • Available in amounts
Logo'd Carbine Case . . . . . . . . . . . . . . . . . . . . . (RC-36A) $85.95 starting at $25
• Approx. internal dimensions: 36" x 11"
Logo'd Rifle Case . . . . . . . . . . . . . . . . . . . . . (RC-4123A) $85.95
• Approx. internal dimensions: 40" x 11" The “Life Jacket”
• A case for full sized rifles, with Bushmaster logo Safety Device for AR15/M16 Rifles
embroidered in red and white • Polycarbonate clamshell enclosure locks up your
AR type rifle and covers the entire action
• Two separate keyed locks and keys are included
• Foam padded interior with fixed carry handle
NOTE: To use the Life Jacket
on a rifle with our V Match
tubular aluminum forend,
some material willl have
to be removed fromm the
Discreet Carrying Case for Carbines front opening.
• 32" black Cordura low profile case $29.95 (L J -1)
• Includes Four Interior Magazine Pouches (for up to 40
Rd. Mags) and a Padded Outside Pocket for accessories
• Approximate Internal Dimensions: 32" x 13"
Discreet Case for Carbines . . . . . . . . . . . . . (DC-CAR-15) $85.95
Discreet Case for Rifles . . . . . . . . . . . . . (DC-M16/AR15) $85.95
• A similarly styled model with Inside Dimensions of 41" x
13" – designed for full sized AR15/M16
Discreet Case for Uzi Short Bbl. SMG's . . . . . . . (DC-22) $85.95
• Approx. Internal Dimensions of 22" x 11" The Bushmaster
Gun Pad
• 18" x 12" brightly
colored pad has
crisp images of
Bushmaster rifles, a
protective laminated
surface, and a soft, non-skid foam padded backing
$9.95 (QP-014)

www.bushmaster.com 63
Accessories/Apparel

RealTree® Hardwoods Camouflage Furniture Bushmaster Knit Caps


Rifle Length Handguards . . . . . . . . . . . . . . . (9349059-C) $39.95 Orange Knit Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002OR)
A2 Solid Buttstock . . . . . . . . . . . . . . . . . . . . (9349119-C) $54.95 Black Knit Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002B)
Standard Pistol Grip . . . . . . . . . . . . . . . . . . (9349127-C) $19.95 Navy Blue Knit Cap . . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002N)
CAR Handguards . . . . . . . . . . . . . . . . (1005-914-4572C) $29.95
CAR Furniture SET . . . . . . . . . . . . . . . . . (CAMO-RT-CAR) $99.95 Gray Knit Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002G)
RIFLE Furniture 3 PIECE SET . . . . . . . (CAMO-RT-RIFLE) $106.95 $9.95 each

Desert Camo Furniture


Pistol Grip . . . . . . . . . . . . . . . . . . . . . . . . (9349127-DC) $19.95
Trapdoor Buttstock . . . . . . . . . . . . . . . . . .(9349119-DC) $54.95
CAR Handguards . . . . . . . . . . . . . . (1005-914-4572-DC) $29.95
3 PIECE SET . . . . . . . . . . . . . . . . . . . . . . (CAMO-DC-CAR) $99.95

Bushmaster
Vapor II Glasses (R-01535) $12.95 Black & Tan Cap
• Sleek, sporty style Black Cap . . . . . (QP-001) $9.95
95
• Wrap-around polycarbonate lens with anti-fog coating Tan Cap . . . . . . (QP-001T) $9.95
95
• Soft nose bridge prevents slipping
• Lightweight frame design
• Meets ANSI Z87+ and CSA Z94.3 standards

Bu
Bushmaster
Bla
Blaze Orange
Hu
Hunter’s Cap
$10.95 (QP-002OH)
$10

Bushmaster
Bushmaster Two-Tone Cap
Logo Mug
$9.95 (QP-002TTBR)
(QP-016) $4.95

Bushmaster Logo Patch


$2.95 (QP-012)
Bu
Bushmaster
Bushmaster Logo Decal Ca
Canvas Cap
$1.95 (QP-013) $9.95 (QP-002BR)
$9.9

64 Orders 24 Hrs: 1.800.998.7928


Bushmaster Fleece Lined Jackets
• Lots of the folks at the Bushmasterfactory stay warm
all the Maine winter long with this Fleece Lined Jacket
• It’s Toughlan® nylon shell is windproof and water
resistant, it has a winter weight 11.5 oz. fleece lining
and 3 zippered pockets (2 outer and 1 inner)
• Bushmaster logo is embroidered in red and white on
the left chest
• Available in Black with Black Fleece Lining, or Khaki
Tan with Green Fleece Lining
• Order with the part numbers shown below followed by
your size: S - M - L - XL - 2XL - 3XL - 4XL - 5XL.
Black . . . . . . . . . . . . . . . . . . . . . .(QP-8800BB & size) $69.95
Khaki . . . . . . . . . . . . . . . . . . . . . . (QP-8800TG & size) $69.95

Bushmaster Sport Shirts


• A 50/50 blend knit sport style shirt with collared,
three button neck
• Bushmaster snake logo embroidered in two colors
on upper left chest
• Comfortable, durable, and great for the field,
range or sporting event
• Order with the part numbers shown below followed
by your size: S - M - L - XL - 2XL
White . . . . . . . . . . . . . . . . . . . . . . . (QP-002W & size) $24.95
Black . . . . . . . . . . . . . . . . . . . . . . . . . (QP-002 & size) $24.95

Bushmaster Logo Sweat Shirts


• Heavy Jerzees "Super Sweats" crewneck
neck pull-over
ester)
sweatshirts (50% cotton / 50% polyester)
• Bushmaster snake logo embroideredd in red/white/black
on upper left chest
• Order with the part numbers shown below followed
by your size: S - M - L - XL - 2XL
Khaki Tan . . . . . . . . . . . . . . . . . . . . . . (QP-021K
021K & size) $27.95
Black . . . . . . . . . . . . . . . . . . . . . . . . . .(QP-021B
021B & size) $27.95
Gray . . . . . . . . . . . . . . . . . . . . . . . . . .(QP-021G
021G & size) $27.95

www.bushmaster.com
b h t 65
Apparel

Bushmaster Screen Printed T-Shirts


• Quality blend 50% cotton / 50% polyester Front
• Bushmaster snake logo silkscreened in two colors on
upper left chest with larger variations on the back
• Order with the part numbers shown below followed
by your size: S - M - L - XL - 2XL
Black . . . . . . . . . . . . . . . . . . . . . . . . . (QP-003 & size) $15.95
95
White . . . . . . . . . . . . . . . . . . . . . . . (QP-003W & size) $15.95 95

Back

Back

Front

Bushmaster Logo Embroidered T-Shirt


• Heavy weight and high-quality 100% cotton
• Embroidered red and black Bushmaster snake logo
on upper left chest
• Order with the part numbers shown below followed
by your size: M - L - XL - 2XL
White . . . . . . . . . . . . . . . . . . . . . . . . . (QP-007 & size) $14.95

Bushmaster Long Sleeve


Logo Embroidered T-Shirt
• Heavy weight Ultrablend 50% cotton / 50% polyester
• Embroidered red and black Bushmaster snake logo
on upper left chest
• Order with the part numbers shown below followed
by your size: M - L - XL - 2XL
Black . . . . . . . . . . . . . . . . . . . . . (QP-0222B-L & size) $16.95

66 Orders 24 Hrs: 1.800.998.7928


EOTAC Long-Sleeve Shirt EOTAC Short-Sleeve Polo
• 8 oz. all-cotton, fade resistant, pre-shrunk and • 8 oz. all-cotton, fade resistant, pre-shrunk and
washed, with wrinkle resistant finish washed, with wrinkle resistant finish
• Ribbed anti-roll collar • Ribbed anti-roll collar
• Ribbed cuffs • Zippered sleeve pocket
• Zippered sleeve pen pocket • Straight cut bottom with extended shirt tail
• Straight cut bottom with extended shirt tail • Side vents and sweat patch
• Side vents and sweat patch • Order with the part numbers shown below followed
• Order with the part numbers shown below followed by your size: S - M - L - XL - 2XL
by your size: S - M - L - XL - 2XL Black . . . . . . . . . . . . . . . . . . (QPE-405-BLK-S & size) $36.99
Black . . . . . . . . . . . . . . . . . . (QPE-407-BLK-S & size) $54.99 Khaki . . . . . . . . . . . . . . . . . . . (QPE-405-KH-S & size) $36.99
Khaki . . . . . . . . . . . . . . . . . . . (QPE-407-KH-S & size) $54.99 Red . . . . . . . . . . . . . . . . . . . (QPE-405-RED-S & size) $36.99

www.bushmaster.com 67
Apparel

EOTAC Short-Sleeve Shirt EOTAC TackVest


• 5.5 oz. all-cotton poplin, fade-resistant, pre-shrunk • Outer shell: Bomb-proof 8.5 oz. all-cotton canvas,
and washed, DuPont Teflon® fabric protector fade-resistant, pre-shrunk and washed, DuPont
• Button down collar Teflon® fabric protector
• Sleeve pen pocket • Lining: 5.5 oz. all-cotton poplin, fade-resistant,
• Bellowed chest and zippered utility pockets pre-shrunk and washed, DuPont
Teflon® fabric protector
• Straight cut bottom with side vents
• Order with the part numbers shown below followed
• three-way ventilated back
by your size: S - M - L - XL - 2XL - 3XL
• Order with the part numbers shown below followed
by your size: S - M - L - XL - 2XL • Additional $8 for 3XL
Black . . . . . . . . . . . . . . . . . . (QPE-408-BLK-S & size) $49.99 Black . . . . . . . . . . . . . . . . . . (QPE-101-BLK-S & size) $74.99
Khaki . . . . . . . . . . . . . . . . . . . (QPE-408-KH-S & size) $49.99 Khaki . . . . . . . . . . . . . . . . . . . (QPE-101-KH-S & size) $74.99

68 Orders 24 Hrs: 1.800.998.7928


CUSTOMER SERVICE, EXCHANGES, BACKORDERS, GUNSMITHING, WARRANTY
NOTE: With the “Sunsetting” of the Gun Legislation of 1994, many features of “Pre-Ban” rifles are again available – BUT not in all areas!
California, Connecticut, Hawaii, Massachusetts, Maryland, New Jersey, New York, Puerto Rico, and possibly others, all have their own Statutes
regarding what they call “Assault Weapons.” To avoid the possibility of legal problems, check your local laws before purchasing some items
offered in this catalog.

CUSTOMER SERVICE. Our telephone personnel are highly experienced and well informed firearms enthusiasts. If you have any questions
about Bushmaster products, you'll find a courteous member of our firm willing and able to answer them – just call our Toll-Free Customer
Service line (1-800-883-6229) between 8:30 am - 6:00 pm, Monday through Friday, (E.S.T.). We will also be happy to promptly answer
your questions, or order inquiries, via E-mail to: Customerservice@bushmaster.com

EXCHANGES. Should items you order from Bushmaster not be to your expectations, please contact our customer service department for
a Return Merchandise Authorization (RMA) Number. Unused items may be returned within 30 days, include a copy of your invoice.
Note: Any Custom Barrel Assembly – not shown in catalog – may not be returned. No refunds allowed after 15 days of invoice date.
Restocking charge 20%. Include invoice with your return – its upper left corner can be used as return label. Return all pieces of kits – wrap and
package them securely. Insure package for your protection. Include the reason for return of each item in an accompanying letter and we will do
everything possible to speed your exchange.

BACKORDERS. We make every attempt to deliver your order from available stock - immediately. Should there be a backorder on a part, we'll
ship the bulk of your order and WE pay the shipping on the backordered part (with the exception of complete rifles). FedEx Standard Overnight
(1 Day); FedEx 2 Day and FedEx Express Saver (3 Day) Services are available upon request at additional charge. For C.O.D. Service from FedEx,
please add $8.50 per package (Note: FedEx will accept cash as C.O.D. payment).

BUSHMASTER GUNSMITHING. Our company policy is to offer gunsmithing assembly at no charge when parts are purchased
from us (with the exception of sight bases). We will also offer our professional gunsmithing services to any customers who care to ship us their
firearms or assemblies for repair or buildup – and we will work on brands other than Bushmaster. Gunsmithing time is charged at $40.00 per
hour, and we charge a $16.50 fee for return shipping of your rifle, upper or parts ($19.50 for DCM Rifles due to extra weight). For a gunsmithing
estimate, please call 1-800-998-7928 or E-mail to: Techsupport@bushmaster.com

BUSHMASTER LIMITED ONE YEAR WARRANTY. Bushmaster Firearms are warranted to be free from defects in materials and
workmanship. Any such defect of which Bushmaster Firearms International, LLC is given written notice, as provided below, within one year and
ten days from the date of first purchase by a customer will be remedied by Bushmaster Firearms International, LLC. This warranty is granted by
Bushmaster Firearms International, LLC, P.O. Box 1479, 999 Roosevelt Trail, Windham, Maine 04062.

To initiate a Warranty claim, call Bushmaster Customer Service (toll free: 8:30 AM to 6:00 PM E.S.T. – Monday thru Friday 1-800-883-6229)
to get an RMA number (“Return Merchandise Authorization”). Warranty claims should state (in writing) the model and serial number of the fire-
arm concerned, a description of the difficulty experienced, and the date of purchase. The firearm concerned should be shipped (transportation
charges prepaid), to the Warranty Service Department, Bushmaster Firearms International, LLC, 999 Roosevelt Trail, Windham,
ME 04062. Firearm shipment should be insured by the owner, as Bushmaster Firearms International, LLC will accept no responsibility
for loss or damage in transit.

Shipping and insurance charges for the return of a firearm to its owner will be paid by Bushmaster Firearms International, LLC if the related
claim is a proper claim for warranty work.

Under no circumstances shall Bushmaster Firearms International, LLC be responsible for incidental or consequential damages
with respect to economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise.
Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation may not apply to you.
Bushmaster Firearms International, LLC will not be responsible for the results of careless handling, unauthorized adjustments, defective,
low quality, reloaded, or improper ammunition, corrosion, neglect, ordinary wear and tear, or unreasonable use. Furthermore, the liability of
Bushmaster Firearms International, LLC under this warranty shall be limited solely to the obligation to repair or replace the firearm, and to pay
transportation and insurance charges for return of the firearm to owner.

NOTE: Handguns and long guns are classified as FIREARMS or DANGEROUS WEAPONS. Guns are surrendered by Bushmaster Firearms Inter-
national, LLC with the express understanding that it assumes no responsibility for resale handling under local laws and regulations.

A NOTE REGARDING LEAD. Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in
exposure to lead, a substance known to cause birth defects, reproductive harm, and other serious physical injury. Have adequate ventilation at
all times. Wash hands thoroughly after exposure to lead.

www.bushmaster.com 69
ORDERING INSTRUCTIONS / SHIPPING INFORMATION
FOR FASTEST ORDER PROCESSING, visit our Website and order direct from our online catalog at WWW.BUSHMASTER.COM
Our entire catalog and more is on the Internet – offering easy and secure ordering without waiting time on the phone! Many of our orders received
via Internet are processed and shipped the same day (with the exception of back ordered items). Any orders that include E-mail addresses automati-
cally get a return mail confirmation of shipment including the type of shipping service, a FedEx tracking number (if applicable), C.O.D. costs (if
applicable), and notification of multiple packages. Customer Service and Technical Support inquiries can also be handled quickly and efficiently by
E-mail. Contact us at: Customerservice@bushmaster.com • Techsupport@bushmaster.com • Export@bushmaster.com

For Telephone Orders, Call: 1-800-998-7928


Bushmaster Sales Consultants are on call: Mon. through Fri.: 8:30 am – 7:00 pm
(Eastern Standard or Daylight Savings Time – all other hours of the day by answering machine)

For Orders by FAX: 1-207-892-8068 • Customer Service: 1-800-883-6229


(Customer Service Phone Hours: Monday through Friday - 8:30 am - 6:00 pm)

All Catalog Prices are in U.S. Dollars – Please Pay in U.S. Currency
CATALOG PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE!
Current pricing can be seen on our website – www.bushmaster.com
Please Have Your Credit Card Available. We will NOT charge your credit card until we ship your order! FREE Gunsmithing and assembly is available
on most AR15/M16 parts at the time of purchase. We accept purchase orders from Federal, State, and Local Governments and Institutions.

SHIPPING – Orders will be shipped promptly via FedEx or First Class U.S. Mail. FedEx Ground is our standard method of shipment. FedEx
Standard Overnight (1 Day); FedEx 2 Day and FedEx Express Saver (3 Day) Services are available upon request. All orders must be accom-
panied with Cash; Credit Card Information; Money Order or Cashier's Check or they will be shipped FedEx C.O.D. (C.O.D. to Continental U.S., Alaska
and Hawaii incurs an extra $8.50 fee per package. FedEx will accept cash as payment – FedEx requires a Phone Number for C.O.D. deliveries as
well as any upgraded delivery services). We request telephone numbers and/or E-mail address when you order to provide the best possible service
in case of questions. In an effort to preserve your privacy, we do not sell our mailing lists. An F.F.L. (Federal Firearms License) is required for the
purchase of Complete Rifles, serial numbered Lower Receivers, or M16 components. Other parts and accessories do not require special licenses.
Personal checks are held 15 days to clear. No refunds after 30 days of invoice date. Returned parts will incur a 20% restocking charge.
NOTE: FedEx has a mandatory “Adult Signature Required” (21 years or older) for all complete Firearms and Lower Receiver shipments.
This Adult Signature Requirement is a FedEx regulation and cannot be waived.
PISTOLS – Federal Law requires that all pistols be shipped by Air Service. FedEx’s mandatory “Adult Signature Required” (21 years or older)
will also be in effect.
DAMAGE – If your FedEx Package arrives damaged, you must alert the FedEx Driver, or call FedEx to notify them of damage problems and to
initiate a claim. The FedEx toll-free national telephone line for this purpose is 1-800-GO-FEDEX.
INTERNATIONAL ORDERS – Bushmaster will now accept International Orders of any amount, subject to U.S. State Department (ITAR) and
Dept. of Commerce regulations. Bushmaster does have established dealers in countries outside the U.S.A. who may be able to supply your needs
– contact Bushmaster for further information.

FOR SHIPPING PARTS ONLY – WITHIN CONTINENTAL U.S.


(Shipping to Puerto Rico and other Territories is charged at cost.)
Shipping, Handling & Insurance Charges for FedEx Ground Service or U.S. Mail are:
$0.00 - $19.99 = $6.50 / $20.00 - $49.99 = $9.00 / $50.00 - $99.99 = $11.50
$100.00 - $249.99 = $14.50 / $250.00 - $499.99 = $18.00 / $500.00 and up = $21.00

FOR SHIPPING COMPLETE FIREARMS – WITHIN CONTINENTAL U.S.


Standard Rifle – FedEx Ground – $16.50 ea. / DCM Rifle – FedEx Ground - $19.50
Pistols – BY LAW – must be shipped by Air Service.
Free Shipping on backordered “Parts” only. Shipping Charges on parts orders over 20 lbs. will be calculated by weight only using our Fedex
published rates plus insurance of .50¢ per $100.00 value.
FedEx C.O.D. Fee – $8.50 per package. NOTE: FedEx will accept cash as payment for C.O.D.s
FedEx Standard Overnight (1 Day); FedEx 2 Day and FedEx Express Saver (3 Day) Services are available upon request.

70 Orders 24 Hrs: 1.800.998.7928


ORDER FORM Your fastest ordering method is on the internet at www.bushmaster.com

SHIP TO:

Name Customer No.


(If available – see catalog label)

Address

City State ZIP

Phone Number E-mail

Method of Payment: RCheck or Money Order Enclosed (Personal Checks are held for 15 Days to Clear.)
R MasterCard R VISA R American Express R Discover R C.O.D.*
All credit card orders must include phone number and must be shipped to address where cardholder receives credit card billing.

If payment is made with R Gift Certificate (Certificate Number)


Credit Card Account Number Expiration Date

Signature
Ship Via: R FedEx Ground (our standard method – other services available)
R U.S. Mail – PARCEL POST (No C.O.D.s*) *FedEx C.O.D. is available. Cash payment is accepted. Phone Number is Required.

Have you ordered from us before? R Yes R No Would you like to receive future catalogs? R

PAGE PRICE
NO. QTY PART NO. DESCRIPTION (EACH) AMOUNT

Shipping, handling & insurance charges for parts only – FedEx Ground Service or U.S. Mail: Other SUBTOTAL
FedEx Services are available at extra cost – consult your salesperson.
All States Sales Tax
$ 0.00 - $19.99 = $ 6.50 $100.00 - $249.99 = $ 14.50
$20.00 - $49.99 = $ 9.00 $250.00 - $449.99 = $ 18.00 Shipping, Handling & Insurance
$50.00 - $99.99 = $11.50 $500.00 - up = $ 21.00
TOTAL AMOUNT
Standard Rifle – FedEx Ground – $16.50 ea. / DCM Rifle – FedEx Ground – $19.50
Pistols must be shipped by Air Service. Shipping will be free on backordered “Parts” only.
Shipping charges on parts orders over 20 lbs. will be calculated by weight only using our
FedEx published rates plus insurance of .50¢ per $100.00 value.
FedEx C.O.D. Fee – $8.50 per package.
(Note: FedEx will accept cash as C.O.D. payment – a phone number is required.)
Call about shipping orders to Hawaii, Alaska, Puerto Rico and other U. S. Territories.

SATISFACTION GUARANTEED, OR YOUR MONEY BACK.


PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. www.bushmaster.com 71
Bushmaster Firearms International, LLC
999 Roosevelt Trail • P.O. Box 1479
Windham, ME 04062

www.bushmaster.com
Phone Orders: 1-800-998-7928

Printed in U.S.A.
Rev. 12/1/09

You might also like