You are on page 1of 11

INDUSTRIAL TRAINING

for Final year Diploma students


(C -16 Curriculum)

LOG BOOK
NAME & PIN OF THE STUDENT

NAME OF THE ORGANIZATION

DATE OF JOINING

NAME OF THE PROJECT

NATURE OF THE WORK ASSIGNED

SRRS GOVERNMENT POLYTECHINC


SIRICILLA.
ELECTRICAL ENGINEERING SAFETY unless you are specially authorized
PRECAUTIONS for them taking all precautions.
The advices are for your safety
1. Electric shocks, are easily received only.
and avoided the risk is not always 13. Always maintain earth connections
apparent, be careful. in satisfactory condition. Safety
2. In case of electric shock when a depends upon good earthing.
person is still in contact with a live 14. While handling table fan or any
wire, if you cannot switch of other portable appliances be sure
immediately, insulate yourself on that is disconnected, switching-of
dry board or thick dry newspaper may not be enough, leakage of
before attempting to get him clear. insulation can give you a serious
Even don’t touch his body, pull him shock.
by cloths if they are dry or remove 15. When cell are being charged n a
him by a piece of dry wood. room, always maintain good
3. Don’t forget to put on your safety ventilation, never bring a naked
belt before starting work above light near a battery.
ground level i.e, on a pole. 16. In case of fire on electrical
4. Beware of live wires or conductors installation do not throw water on
bare or insulated. equipment. It will be very harmful
5. When a ladder is in use, it must be to you, because water is a good
held from slipping by at least one conductor of electricity.
helper. 17. When making sulphuric acid H2SO4
6. Never tamper unnecessarily with or NaOH always add acid to the
any electrical apparatus. water, by drops.
7. Before switching on current to any 18. Do not use a fire extinguisher on
portable equipment make sure electricity unless it is suitable for
that it is properly earthed and the purpose.
insulation is sound. 19. In case of fire, disconnect the
8. Never disconnect a plug point by supply immediately.
pulling the flexible wires. 20. Turn of and unplug equipment
9. Never touch an overhead line (instead of relying on interlocks
unless you made sure that it is that can fail) before removing the
dead and properly earthed. protective cover to clear a jam,
10. Never energise a line unless you replace a part, adjust or
are sure that all is clear and there troubleshoot. Ask a qualified
is no one working on that. person to do the work if it involves
11. Always switch of the main switch opening equipment and creating
before replacing a blown fuse. an exposer to energized parts
12. Never tamper with electric operating at 50 volts or more.
protective or inter looking gearing
21. Dont overload extension cords, multi-outlet strips and wall outlets.
22. Head the warning signs, barricades and /or guards that are posted when equipment or
wiring is being repaired or installed or if electrical components are exposed.
23. The student should follow the safety rule as instructed by the safety officer in the industry.
24. The student should wear the personal safety equipment like shoes, helmets , safety gloves
etc as suggested by the safety department in the concerned industry.
25. The student should be aware of the various electrical hazards occurred and preventive
methods in the industry.
26. The student should not go to dangerous and unsafe area in the industry.
27. The student should know how to use safety belts and fire fighting equipment.

Check for unsafe conditions (either before or while you are using equipment)
1. Is the cords insulation frayed? Cracked or damaged, exposing the internal wiring?
2. Are the plugs prongs bent, broken or missing, especially the third prong?
3. Is the plug or outlet blackened by arcing?
4. Was liquid spilled on or around the equipment?
5. Are any protective parts (or covers) broken, cracked or missing?
6. Do you fell a slight shock when you use the equipment?
7. Does the equipment or the cord overheat when it is running?
8. Does the equipment spark when it is plugged in or when switches or controls are use?
NAME & PIN.NO OF THE STUDENT:

NAME OF THE ORGANIZATION:


NAME OF THE PROJECT:
NATURE OF THE WORK ASSIGNED:
Week NO. __
SI.NO DAY DATE SHIFT/HOURS WORK DONE/ACTIVITY SIGNATURE OF
ENGAGED THE STUDENT

1 MON

2 TUE

3 WED

4 THU

5 FRI

6 SAT

Signature of the in charge of training


NAME & PIN.NO OF THE STUDENT:
NAME OF THE ORGANIZATION:
NAME OF THE PROJECT:
NATURE OF THE WORK ASSIGNED:
Week No.__
SI.NO DAY DATE SHIFT/HOURS WORK DONE/ACTIVITY SIGNATURE OF
ENGAGED THE STUDENT

1 MON

2 TUE

3 WED

4 THU

5 FRI

6 SAT

Signature of the in charge of training


NAME & PIN.NO OF THE STUDENT:
NAME OF THE ORGANIZATION:
NAME OF THE PROJECT:
NATURE OF THE WORK ASSIGNED:
Week No.__
SI.NO DAY DATE SHIFT/HOURS WORK DONE/ACTIVITY SIGNATURE OF
ENGAGED THE STUDENT

1 MON

2 TUE

3 WED

4 THU

5 FRI

6 SAT

Signature of the in charge of training


NAME & PIN.NO OF THE STUDENT:
NAME OF THE ORGANIZATION:
NAME OF THE PROJECT:
NATURE OF THE WORK ASSIGNED:
Week No.
SI.NO DAY DATE SHIFT/HOURS WORK DONE/ACTIVITY SIGNATURE OF
ENGAGED THE STUDENT

1 MON

2 TUE

3 WED

4 THU

5 FRI

6 SAT

Signature of the in charge of training


APPRAISAL FORM

Name of the polytechnic/institute: SRRS GOVERNMENT POLYTECHNIC ,SIRICILLA.


Name of the Trainee:
Pin. No:
Evaluation Period From___________________to____________________

SI.NO Evaluation Criteria Poor Satisfactory Good Excellent


1. Attendance & Punctuality 1 2 3 4 5 6 7 8

2 Familiarity with Technical Terms 1 2 3 4 5 6 7 8

3 Familiarity with Material & tools 1 2 3 4 5 6 7 8

4 Attitude Towards Job 1 2 3 4 5 6 7 8

5 Manual Skills 1 2 3 4 5 6 7 8

6 Application of Knowledge 1 2 3 4 5 6 7 8

7 Problems Solving Skills 1 2 3 4 5 6 7 8

8 Comprehension & Observation 1 2 3 4 5 6 7 8

9 Safety Consciousness 1 2 3 4 5 6 7 8

10 Human Relations 1 2 3 4 5 6 7 8

11 Ability to Communicate 1 2 3 4 5 6 7 8

12 Supervising Ability 1 2 3 4 5 6 7 8

13 General Conduct During the training 1 2 3 4

TOTAL MARKS: /100

Signature of the Training Signature of visiting faculty


In-charge of the industry (SRRS GOVT. POLYTECHNICSIRICILLA)
TRAINEE STUDENT ATTENDANCE PARTICULARS
NAME & ADDRESS OF THE INDUSTRY:
NAME OF THE INSTITUTION: SRRS GOVERNMENT POLYTECHNIC, SIRCILLA.
DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING (DEEE)

SI. PIN & NAME DATE DATE OF NUMBER OF DAYS PERCENTAGE


NO OF THE OF RELIEVING Present Weekly Holidays Casual Medical E.O.L OF
STUDENT JOINING (A) ofs (C) Leave leave ATTENDANCE
(B) (A+B+C)x100
180

Note:
 Training is Six Months Duration.
 90% attendance is compulsory.
 Compensatory ofs given may be added to “Present” Attendance.
Seal of the Industry Signature of the Training In-charge of the industry
CERTIFICATE
DATE:____________

This is to certify that ________________________ bearing PIN


_________________of VI semester, Diploma in Electrical &
Electronics Engineering (DEEE), SRRS,Govt. Polytechnic, Sircilla has
successfully completed the 6 months Industrial Training (as per C-16
curriculum) for the period from _______ to __________ at
_________________________________________

Signature of the Issuing Authority

You might also like