Professional Documents
Culture Documents
Especificações de
Transformadores de
Potencial Indutivo
Luiz Celso
Julho de 2011
GRID
Aplicação de um TP
porcelana.
porcelana.
Capacidade máxima
• Uso Externo
• Isolados em Papel - Óleo
• 72,5 kV - modelo OTEF
• de 72,5 até 145 kV – modelo UXT
• 245 kV - modelo OTEF
Domo de alumínio;
•Domo
Membrana metálica;
•Membrana
Isolador de porcelana;
•Isolador
Tanque inferior em
•Tanque
alumínio fundido ( parte
ativa );
Caixa e tampa em
•Caixa
alumínio fundido;
Parafusos, porcas e
•Parafusos,
arruelas dos terminais
prim. e sec. e placa
característica em aço
Introdução às Especificações de Características Técnicas dos Transformadores de Potencial Indutivo – julho/2011 - P
inoxidável.
© ALSTOM 2010. All rights reserved. Information contained in this document is provided without
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
Série UXT - 72,5 à 145 kV
• Domo em alumínio;
• Membrana metálica;
• Isolador de
porcelana;
• Cuba (inferior) em
Alumínio;
• Caixa e tampa em
alumínio fundido;
• Parafusos, porcas e
arruelas dos
terminais prim. e
sec. e placa
característica em aço
inoxidável.
• Parte Ativa no
Introdução às Especificações de Características Técnicas dos interior
Transformadores deda cuba
Potencial Indutivo – julho/2011 - P
© ALSTOM 2010. All rights reserved. Information contained in this document is provided without
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
Série OTEF – 72,5 e 245 kV
• 1- Tensão(ões) primária(s) e
secundária(s) nominal(is) e relação de
transformação;
• 2- Normas aplicadas;
• 4- Frequência nominal;
• 10-
10- Ensaios de rotina, tipo e especiais.
Introdução às Especificações de Características Técnicas dos Transformadores de Potencial Indutivo – julho/2011 - P
© ALSTOM 2010. All rights reserved. Information contained in this document is provided without
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
1-Tensões nominais e relação de
transformação
ABNT-
ABNT-Associação Brasileira de Normas Técnicas
• NBR-
NBR-6855/09 - Especificação de TP‘s
(Substitui a última revisão NBR-
NBR-6855/92, incorpora e substitui a
NBR-
NBR-6820/92 - Método de ensaio em TP‘s)
IEC-
IEC-International Electrotechnical Comission
• IEC-
IEC-60044.2/03 - Especificação e Ensaios em TP‘s
(Substitui as últimas revisões IEC-
IEC-60044.2/97 e IEC-
IEC-186/87 -
Especificação e Ensaios em TP‘s)
ANSI-
ANSI-American National Standards Institute
• C 57.13/93 - Especificação e Ensaios em TC‘s e
TP‘s
Introdução às Especificações de Características Técnicas dos Transformadores de Potencial Indutivo – julho/2011 - P
© ALSTOM 2010. All rights reserved. Information contained in this document is provided without
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
2-Normas aplicadas
manobra*
manobra*
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
3-Tensão máxima do aparelho e
níveis de isolamento
• - Proteção
• - Medição operacional
• - Faturamento
• - Laboratório de aferição
e sua nomenclatura deve estar de acordo
com a Norma em questão
Introdução às Especificações de Características Técnicas dos Transformadores de Potencial Indutivo – julho/2011 - P
© ALSTOM 2010. All rights reserved. Information contained in this document is provided without
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
5-Cargas Nominais e classe de
exatidão
• Exemplo: 0,3Y
É garantido um erro de 0,3% para tensões
compreendidas entre 90% e 110% da nominal
e tensão máxima (considerando , desde
carga vazio até a carga nominal (75VA)
Introdução às Especificações de Características Técnicas dos Transformadores de Potencial Indutivo – julho/2011 - P
© ALSTOM 2010. All rights reserved. Information contained in this document is provided without
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
5-Cargas Nominais e classe de
exatidão
• IEC - 60044-
60044-2/97
Classes de exatidão: medição: 0,1; 0,2; 0,5; 1,0;
3,0
proteção: 3P; 6P
Cargas nominais [VA]: ( cos ϕ =0,8 )
10,15,25,30,50,75,100,150,200,300,400,500
E ↑, B
B↑↑, como Sn e f são fixos
N2 ↑ , Parte ativa ↑
− 3.b) 1,9Un-
1,9Un-Cont: sem remoção automática da falha.
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
7- Fator de sobretensão / grupo
de ligação
• Fase-
Fase-fase => Fst.=1,2Un cont.
• Fase-
Fase-terra=> Fst.=1,2Un cont./1,5Un-
cont./1,5Un-30s (sistema
eficazmente aterrado)
• Fase-
Fase-terra=> Fst.=1,2Un cont./1,9Un-
cont./1,9Un-30s (sistema
não eficazmente aterrado – remoção automática da
falta)
• Fase-
Fase-terra=> Fst.=1,2Un cont./1,9Un- cont./1,9Un- Continuo
(sistema não eficazmente aterrado – sem remoção
automática
Introdução daCaracterísticas
às Especificações de falta) Técnicas dos Transformadores de Potencial Indutivo – julho/2011 - P
© ALSTOM 2010. All rights reserved. Information contained in this document is provided without
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
8- Carga Simultânea
f= 60Hz
0,3P75 - 0,6P75
Carga simultânea= 150VA
Introdução às Especificações de Características Técnicas dos Transformadores de Potencial Indutivo – julho/2011 - P
© ALSTOM 2010. All rights reserved. Information contained in this document is provided without
liability for information purposes only and is subject to change without notice. No
representation or warranty is given or to be implied as to the completeness of information or
fitness for any particular purpose. Reproduction, use or disclosure to third parties, without
express written authority, is strictly prohibited.
9-Tipo de instalação e condições
especiais de funcionamento
• Ensaios de rotina:
• Ensaios de tipo:
• Ensaios especiais:
Exemplo típico:
138000/R3 - 115/115/R3 (2X)
G2 - 1,15Un-
1,15Un-cont./ 1,5Un -30s
Pth= 144VA
f=60Hz
0,3P25 – 1,2P75
Carga simultânea= 100VA
• Maior confiabilidade;
• Obrigado
!