Professional Documents
Culture Documents
Previous Screen
Product: EXCAVATOR
Model: 330D L EXCAVATOR B6H
Configuration: 330D L Excavator B6H00001-UP (MACHINE) POWERED BY
C9 Engine
Systems Operation
320D, 321C, 323D, 324D, 325D, 328D, 330D, 345C, 365C, 385C, M325D and W345C
Excavators Monitoring System
Media Number -RENR8068-04 Publication Date -01/03/2006 Date Updated -29/03/2006
i02300932
Override Mode
SMCS - 7490
The "OVERRIDE" menu allows the user to override system components to assist in the
troubleshooting process.
Illustration 1 g01152977
(8) Up key
(15) OK key
The "OVERRIDE" menu option is entered by selecting "OVERRIDE" from the "SERVICE" menu.
Press the up key (8) or down key (13) until "OVERRIDE" is highlighted in order to select this
option. Then press the "OK" key (15). Refer to Illustration 2.
Note: Refer to Systems Operation, "Service Mode" for instructions to get to the "SERVICE" menu.
Illustration 2 g01152160
Press the up key (8) or down key (13) in order to highlight the item to override.
Illustration 3 g01152162
After moving the cursor to the desired parameter, use the appropriate key to change the parameter
value. Press the "OK" key (15) in order to start the override.
Illustration 4 g01152164
In order to stop the override, highlight the item and press the left key (12) .
Refer to Table 1 for a list of system components that are available in the "OVERRIDE" menu.
Table 1
"DESIRED ENG
X X Desired Engine Speed
SPEED"
"FAN MOTOR
X X Fan Motor Speed
SPEED"
"TRV SPEED SHIFT"
X X Travel Speed Solenoid Override
"SWING BREAK
X X Swing Brake Solenoid Override
SOL"
"TRV ALARM" X X Travel Alarm Override
Copyright 1993 - 2007 Caterpillar Inc. Mon Mar 5 14:10:02 EST 2007
All Rights Reserved.
Private Network For SIS Licensees.