You are on page 1of 8

Disclaimer

Our policy is one of continuous development. Accordingly the design of our products may change at any time.
Whilst every effort is made to produce up to date literature, this document should only be regarded as a guide and is intended
for information purposes only.
Its contents do not constitute an offer for sale or advice on the application of any product referred to in it. We cannot be held
responsible for any reliance on any decisions taken on its contents without specific advice.

Page 1 of 8 421026587.xls 05/17/2019


Order form MiCOM P127
Ready-to-use configuration

P12x Overcurrent protection P12 7

Variant

Directional/non-directional three phase overcurrent and 7


directional/non-directional earth fault relay
Earth current input
0.1 to 40 Ion A
0.01 to 8 Ion B
0.002 to 1 Ion C
Voltage input
57 - 130 V A
220 - 480 V B
Optional features
None 0
Additional 5 digital inputs 1) 1
IRIG-B inputs + additional 2nd rear port 1) 2
IRIG-B inputs + additional 2nd rear port + additional 5 digital inputs 1) 3
Measurement CTs 8) 4
Measurement CTs + additional 5 digital inputs 8) 5
Measurement CTs + IRIG-B input + additional 2nd rear port 8) 6
Measurement CTs + IRIG-B input + additional 2nd rear port + additional 5 digital inputs 8) 7
Auxiliary voltage Digital input voltage
48 - 250 Vdc / 48 - 240 Vac 105 - 145 Vdc (special application) H
48 - 250 Vdc / 48 - 240 Vac 24 - 250 Vdc T
48 - 250 Vdc / 48 - 240 Vac 110 Vdc -30% / +20% (special application) V
48 - 250 Vdc / 48 - 240 Vac 220 Vdc -30% / +20% (special application) W
24 - 250 Vdc / 48 - 240 Vac 24 - 250 Vdc / 24 - 240 Vac Z
Communication interface
MODBUS / MODBUS (if 2nd RS485 available) 1
KBUS / COURIER / MODBUS - not available 3) 2
IEC60870-5-103 / MODBUS (if 2nd RS485 available) 3
DNP3 / MODBUS (if 2nd RS485 available) 4) 4
IEC60870-5-103 / IEC60870-5-103 (if 2nd RS485 available) 9) 5
Modbus TCP/IP / Modbus (if 2nd RS485 available) 10) (with voltage V&W only) 6
IEC60870-5-103 Eth / Modbus (if 2nd RS485 available) 10) (with voltage V&W only) 7
Language
French 0
English / American 1
Spanish 2
German 3
Italian 4
Russian 5
Polish 6
Portuguese 7
Dutch 8
Czech A
Hungarian B
Greek 3) C
Turkish 5) E
Chinese 6) D
Platform
SE look&feel Phase 2 2
SE look&feel Phase 2 with larger LCD 3
Latest Major Software release
V ?.? ?
Latest Minor Software release
V ?.? ?
Mounting option
None (default) 7) 0
Pre-fixed HMI (no withdrawability) 1
Sealed Cover 7) 2
Pre-fixed HMI + Sealed Cover 3

NOTES :
1)
Only available with Phase 2 Hardware and V11.C , or later, firmware
3)
Not available
4)
Only available with software version V11, or later, firmware
5)
Only available with software version V11.B, or later, firmware
6)
Only available with Phase 2 Hardware with larger LCD
7)
Not available with Auxiliary voltage/Digital input voltage code T
8)
Only available with larger LCD and V14.A , or later, firmware
9)
Only available with additional 2nd rear port (RS485)
10)
For China only. Inquiry out of China, please contact product manager before tendering

05/17/2019
Order form configurator MiCOM P127
Ready-to-use configuration

1-3 4 5 6 7 8 9 10 11 12 13 14

Directional/non-directional overcurrent and Directional/non-


P12 7 A A 0 Z 1 1 2 G A 0
directional earth fault relay
SAP PART NUMBER E127AA0Z112GA0
Earth Current Input
0.1 to 40 Ion A
0.01 to 8 Ion
0.002 to Input
Voltage 1 Ion

57 - 130 V A
220 - 480 V
Optional Features
None
Additional 5 digital inputs
IRIG-B inputs + additional 2nd rear port 0
IRIG-B inputs + additional 2nd rear port + additional 5 digital inputs
Measurement CTs
Measurement CTs + additional 5 digital inputs
Measurement
Auxiliary CTs + IRIG-B
Voltage / input + additional
Digital 2nd rear port
Input Voltage
Measurement CTs + IRIG-B input + additional 2nd rear port + additional 5 digital inputs
48 - 250 Vdc / 48 - 240 Vac 24 - 250 Vdc / 24 - 240 Vac
24 - 250 Vdc / 48 - 240 Vac Z

Communication
MODBUS / MODBUS (if 2nd RS485 available)
KBUS / COURIER / MODBUS - not available
IEC60870-5-103 / MODBUS (if 2nd RS485 available) 1
DNP3 / MODBUS (if 2nd RS485 available)

Default HMI (Human / Machine Interface) Language


French
English / American
Spanish
German
Italian
Russian 1
Polish
Portuguese
Dutch
Czech
Hungarian
Greek : notVersion
Hardware available
Chinese
Phase
Turkish2 with standard display 2
Software Version :
Software Version V16.A
Software Version V15.E
Software version V15.C GA
Software version V15.B
Software Version V12.A
Mounting OptionV10.D
Software Version :
None (default)
Pre-Fixed HMI (no withdrawability) 0
Sealed Cover
Pre-Fixed HMI + Sealed Cover

05/17/2019
Issue : 1 - As at 01/03/07 Derived from P125-6-7 Cortec
Issue : 2 - As at 13/04/07 Master Text logic now excludes Software Version for Phase 1
Issue : 3 - As at 20/04/07 Date Drivers amended to include conditional protocol and language statements & to correct Software
Issue : 4 - As at 26/06/07 Reconfigured to use phase selected dates & amend software version per CID SBIA-74EHVF, commu
Issue : 5 - As at 29/06/07 Retrospective correction of software to V10.D/AD (was V10.G/AG in error).
Issue : 6 - As at 17/07/07 Retrospective re-addition of Voltage Input to Phase 1 Cortec & master Text (was "0" in error).
Issue : 7 - As at 01/08/07 Cortec Phase 2 & Database amended to show revised availability message for Options V & W per F
Issue : 8 - As at 20/12/07 SW V11.B phase 2 released as per SBIA-79ZCKA, release includes addition of Turkish language op
Issue : 9 - As at 20/12/07 SW V11.A (EDF C15-400) phase 2 added per email Guilhen dated 22/01/08 - 22/01/08
Issue : 10 - As at 20/12/07 SW V11.A (EDF C15-400) phase 2 made available in all cases EXCEPT those with Aux Voltage cod
Issue : 11 - As at 20/12/078 Configurator and Master Text lookup array corrected for Software version description (V11A wasn't
Issue : 12 - Worksheet added showing Phase 2 equivalent of any Phase 1 configuration - 23/06/08
Issue : 13 - As at 23/07/08 table added to select software options dependant on version, voltage and language in line with F Ta
Issue : 14 - Retrospective change to T option text (was "ac immune") 14/10/08
Issue : 15 - Retrospective change to Master Text lookup array for software version - 27/01/09
Issue : 16 - SBIA-7S6FBV releases Universal Power Supply, Optional Mounting Variants and V11.C software version - 26/06/0
Issue : 17 - Date Drivers and Database corrected for Aux/Digital volts options for Phase 1 - 08/07/09
Issue : 18 - Database corrected to allow hardware options (digit 14) with any available software option for Phase 2 per F Taesc
Issue : 19 - Database corrected per G Giannitelli's verification - 04/08/09
Issue : 20 - Further Database and BOM corrections per G Giannitelli's verification - 19/08/09
Issue : 21 - Database array correctly sorted to apply option corrections per F Taesch's e-mail - 19/08/09
Issue : 22 - Further Database and BOM corrections per G Giannitelli's verification & Macro removed for demostration purpose
Issue : 23 - Cosmetic changes to standardise all Px2x Cortecs - 25/09/09
Issue : 24 - CID SBIA-7W8BWW - 30/09/09
Issue : 25 - CID SBIA-85BC9X addition of 2CTs measurement - 30/06/10
Issue : 26 - Auxiliary Voltage rating for Universal Power Supply option, 'Z', amended to 24-250Vdc/48-240Vac as per CBUN-8A
Issue : 27 - SW Version V13.A withdrawn as per SBIA-8DPDSD - 15/02/11
Issue : 28 - CID SBIA-8EQDRU : SW V14.A released - 16/03/11
Issue : 29 - Phase 1 removed from configurator, SW availability updated as per rationalisation project - 31/05/11
Issue : 30 - SW versions 10D & 12A reintegrated to cortec under rationalization project - 07/06/11
Issue : 31 - SW V15.A released per SBIA-8MCH3D, V14.A invalidated with IEC103 protocol - 21/10/11
Issue : 32 - Tendering sheet added - 13/02/12
Issue : 33 - SW version V15.B released as per SBIA-8RHJWV - 21/02/12
Issue : 34 - SW version V15.C released as per SBIA-8YNCWZ - 10/10/12
Issue : 35 - As per SBIA-8ZYH6M - SW versions V11.C, V12.A, V14.A & V15.A invalidated for Chinese language option - 06/12
Issue : 36 - Equipped PCBAs introduced - 13/08/13
Issue : 37 - As per SBIA-99EB8S - SW version V15.A removed from option
Issue : 38 - As per BLII-9AMCR4 - SW version V15.D released along with Comms options 6 & 7 - 03/09/13
Issue : 39 - SW versions (V10.D & V11.C) obsoleted per SBIA-9AYGDB- 10/09/13
Issue : 40 - SW version V10.D released per SBIA-9CTB9P- 06/11/13
Issue : 41 - SW version V15.E released per RKLI-9KA9JE - V15.D withdrawn 09/06/14
Issue : 42 - As per RKLI-9KRAXG - Graphical Display option with SW V15.B &V15.C withdrawn - 13/06/14
Issue : 43 - As per RKLI-9TC5Y2 S/W version 14.A withdrawn from offer - 12/2/15
Issue : 44 - As per RKLI-AK9KE5 S/W version 16.A released - 15/06/17
Master Text

P127AA0Z112GA0

Directional/non-directional overcurrent and directional/non-directional earth fault relay

Earth Current Input :


0.1 to 40 Ion
Voltage Input :
57 - 130 V
Optional Features :
None
Auxiliary Voltage :
24 - 250 Vdc / 48 - 240 Vac
Digital Input Voltage :
24 - 250 Vdc / 24 - 240 Vac
Communication Protocol :
MODBUS / MODBUS (if 2nd RS485 available)
Default HMI Language :
English / American
Hardware Version :
Phase 2 with standard display
Software Version :
Software Version V16.A
Mounting Option :
None (default)

Page 5 of 8 421026587.xls 05/17/2019


P127AA0Z112GA0 Quantity
Location
Item Description
E2072078A0 Extension Board A 1 15
E20720813Z I/O Board 3Z 1 7
E517060101 Operator Label 4
E517719101 Screw Pack 1
E517725101 Product Label 4 17
E517837101 Extractor 2
E518326103 Connection Diagram P125-26-27 1
E518327102 30TE Cardboard Box 1
E518414110 Front Membrane assembly Phase 2 1 2, 3, 6, 29
E843992001 Cable Ties 6
EGN0383004 Case and Chassis 1 1, 4, 12
EZB4018118 Self tapping screw 16 10
EA00026928 VCI Bag 1
EZB5017036 Washer 6 13
EZB5321126 Screw M3 X 16 recessed pan head steel 6 9
1
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Cortec Landing cell : P127AA4Z123FB0 P 1 2 7 A A 4 Z 1 2 3 F B 0


Configurator feedback : P127AA0Z112GA0 P 1 2 7 A A 0 Z 1 1 2 G A 0

Cortec digit control 1 P


Cortec digit control 2 1
Cortec digit control 3 2
Cortec digit control 4 7
Earth Current Input 1 A
Voltage Input 1 A
Optional Features 1 0
Auxiliary Voltage / 2 Z
DI Voltage 1
Communication 1 1
Default HMI (Human / Mac 2 1 2
Software Version : 1 G A
Mounting Option : 1 0
double digit in same row

5
6
7
8
9
10
11
12
13
14
15
16
17
0
0
0
0
0
0
0
0
0
0
0
0
0

You might also like