You are on page 1of 4

Course Syllabus AE 380 Spring 2007 Page 1 of 4

AE 430: Control Systems for HVAC

Syllabus for Spring 2007

(Tuesday/ Thursday: 11:00 – 12:30)


Room: Curtis 352A

Instructor:
Dr. Jin Wen
Department of Civil, Architectural & Environmental Engineering
Alum Engineering 270-H
Phone: 215.895.4911
Email: jinwen@drexel.edu

Office Hours:
Instructor: Tue/Thur 14:00 – 15:00 or by appointment

Purpose:
- Introduce the basic concepts of controls applied to HVAC system:
 Direct digital control system
 Control loop
 System modeling for control purpose
 Transferring function
 Selecting and locating sensors and actuators
- Design tuning control algorithms
- Design and program control sequences for HVAC systems

Objectives:
By the end of the term, the students of this class should:
1. Understand the basic concepts of control loop
2. Understand the basic structure of direct digital control system
3. Get familiar with the sensors, actuators, and control algorithms commonly used in HVAC systems
4. Be able to design a simple control algorithm for a HVAC system control
5. Be able to select, locate, and size most commonly used sensors and actuators in HVAC systems
6. Be able to design and program control sequences for HVAC systems

Prerequisites:
1) AE 220 or
2) MEM 414 or
3) Approval by the instructor

Textbooks:
“Control Systems and Applications for HVAC/R”, Thomas Horan, XanEdu, 2005
Additional handouts as required

Reference:
“Electromechanical and Electronic Controls for HVAC/R”, Billy C. Langley, Prentice Hall, 1999

Course Evaluation Policy:


Course Syllabus AE 380 Spring 2007 Page 2 of 4

Homework: 15 %
Project I 25 %
Project II 25 %
Comprehensive exam 30 %
Class attendance 5 % (on class quiz and question)

Important: Earning a final grade less than 50% will fail to pass this course.

Homework:
- Assignments, each consisting of a number of problems, will be given on the day of each class and due at
the beginning of the next class on Tuesdays.

- Your solutions can be either typed or handwritten. But, losing credits due to the illegibility of your
solutions is your sole responsibility.

- No assignments submitted via WebCT are accepted.

- Late due assignments are generally NOT accepted.

- A late due assignment may receive up to 70% of the actual credits earned on this assignment with a
reasonable excuse, which is subject to the instructor's judgment.

- Solutions will be posted on the course homepage (WebCT).

- No assignments are accepted, by any excuse, after the corresponding solutions are posted on WebCT.

- The office hours are your resource to accomplish these assignments and this course. Please stop by and
bring in any of your questions in conjunction with your assignments and this course.

Handouts:
- The class notes and other pertinent materials will be posted on the course homepage (WebCT). The
copyright of these materials shall be respected.

Exams:
- A final comprehensive exam, accounting for 30% of your final grade of this course, will be given in the
final week. You have 100 minutes to finish this exam with open book and closed notes.

- Incomplete solutions, lack of work-out steps toward answers, and illegible handwriting will cause you to
lose partial or full credits on your solutions.

- Exam problems are derived from your reading assignments, class notes and homework assignments.
Study and review of these materials before the exam will help you to crash the exam.

- Please be advised that there will be NO time for you to dig in the book for solutions during the final
exam, because the exam is well designed for a full working load of 100 minutes solely in solving problems.
The open book is for you to refer to equations, charts and tables in the book in assistance to solving
problems.

- No make-up exam will be granted unless:


1. A student is deeply sick on the day of exam with a doctor's written proof; or
2. A student runs into a family emergency, involving an immediate family member, on the day of
exam with a proof letter from either a parent or guardian of such a student.
Course Syllabus AE 380 Spring 2007 Page 3 of 4

- A petition of a make-up exam must be sent to the instructor within three days following the exam day.

Class attendance:
Class attendance will be randomly checked. Each absence caught will cause losing 2 % of the points, up to
the maximum of 5 % points for class attendance.

WebCT:

The course syllabus, class notes, assignments and other reading materials will be posted on WebCT for you
to access and obtain. All important class announcements will be published and communicated via WebCT.
It is the sole responsibilities of the students to get used to using WebCT. For those of you, who are not
familiar with the WebCT environment, please resort to any available resource to learn and cope with it.

For WebCT related questions, please check the student WebCT manual at
http://webct.drexel.edu/web-ct/help/en/mywebct/StudentManual/index.html, or

Contact the WebCT Support Group at


webct@drexel.edu

To access your WebCT courses, log on to Drexelone, click Student Service tab, then click My Course, click
the course that you want to access from the list.

Once you log on to WebCT, select the course that you want to access.

Email:
Students' email related to this course and sent to the instructor will be replied on every Tuesday and
Thursday. Please check your Drexel email accounts on a regular basis for class updates.

For the benefits of students, the questions that demand a rather complex explanation shall be asked in
person during the office hours.

Schedule:

Week Date Topic Reading


1 4/3 Introduction to Control System Chap. 1-4
4/5 Building Intelligent System I Handout
2 4/10 Building Intelligent System II Chap 13
4/12 Sensor and Actuator Transfer Function Chap 5, 6, handout
3 4/17 Building and HVAC Modeling
4/19 Control algorithm I Chap 8
4 4/24 Control algorithm II Chap 11,12
4/26 Project I
5 5/1 Design of Control Sequence Chap 14
5/3 AHU Control Strategies I Chap 15
6 5/8 AHU Control Strategies II Chap 16, 17,19
5/10 Zone Terminal Device Control I Chap 20
7 5/15 Zone Terminal Device Control II Chap 20
5/17 Project II
8 5/22 Project II
5/24 Sensors Chap 7
9 5/29 Field Visit
Course Syllabus AE 380 Spring 2007 Page 4 of 4

5/31 Actuators Chap 9


10 6/5 Cooling Plant Control Handout
6/7 Comprehensive Exam

You might also like