You are on page 1of 5

Voronoi

 Shatter  v2.0  help  file  


1,  UI  

 
 
5  parts;  
a) Help  &  Settings  button  
b) Generate  methods  group  
c) Clip  shapes  group  
d) Masks  and  Shape  layers  group  
e) Generate  button  
 
 
 
 
2,   Detail  
a,Help  &  Settings  button  
Click  to  open  “Help  &  Settings”  window  
b,Generate  methods  group  
a)   Random  panel  
Generate  random  number  of  pieces

 
b) Selection  panel  
Generate  pieces  from  selected  points,  one  piece  for  each  point.  
You  can  use  position  values  and  masks  as  points.  
When  you  select  more  than  one  layer,  and  no  layer  properties  
have  been  selected,  script  will  use  the  position  value  of  every  
layer  as  points.  If  there  are  keyframes,  every  keyframe  will  be  
treated  as  a  point.  
If  there  are  layer  properties  been  selected,  script  will  read  the  
properties  as  points  (you  can  only  select  “position”  or  “mask”  or  
both).    
 

c) Brightness  Map  panel  


Generate  pieces  from  the  brightness  values  of  a  map  layer.  

 
example:  

 
c,Clip  shapes  group  
  Use  one  or  more  masks  to  clip  the  pieces.  
This  function  doesn’t  work  with  Bezier  curves.  If  the  masks  you  select  
have  Bezier  curves,  all  the  curves  will  be  converted  to  polygon.    
   
Check“cut  pieces”to  enable  clip  shapes  

 
You  can  only  use  masks  as  clip  shapes,  you  can’t  use  shape  layers.  
If  you  select  a  layer  with  masks  on  it,  script  will  use  all  the  masks  as  clip  
shapes  
If  you  only  want  to  use  certain  one  or  more  masks  as  clip  shapes,  just  
select  the  masks  you  want  to  use.  
Script  only  supports  ”Add”,  ”Subtract”,  “Intersect”  and  ”Difference”  as  
Mask  Mode.  It  doesn’t  support  “Invert”.  
d,Masks  and  Shape  layer  group  

   
a) Masks  
Generate  masks  on  selected  layer  
By  checking  ”Distribute  masks  to  layers”  you  can  distribute  each  
piece  to  a  single  layer.    
By  checking  “Fill  masks  with  random  color”  you  can  fill  each  layer  
with  a  random  color.  
By  checking  “Center  Anchor  Point”  you  can  center  every  layer’s  
Anchor  Point.  
b) Shape  Layers  

 
Generate  Shape  layers.  
By  checking  “Fill  layers  with  random  color”  you  can  fill  each  
Shape  layer  with  a  random  color.  
By  checking  “Add  stroke  to  all  layers”  you  can  add  stroke  to  all  
Shape  layers.  
By  checking  “Center  Anchor  Point”  you  can  center  every  layer’s  
Anchor  Point.  
 

You might also like